PoPprint

4.7

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the PoPprint range from £7.99 to £95.99, and the average price of all the products is about £21.35. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

PoPprint has a relatively small number of products for sale, only 13. We analyzed some of them in detail and recommended them to our readers. If you find yourself hesitating about a purchase, check out our thorough PoPprint review to see what the best picks are.

PoPprint Best Sellers

Last Updated: 14 Jun 2023

PoPprint GT2 20 Teeth 5 mm Bore Aluminium Pulley for 3D Printers 6 mm Wide Timing Belt (Pack of 2),Silver Color

Buy on Amazon Find on eBay

1.[20 Teeth 5mm Bore] GT2 Timing Belt Pulley with 5mm Bore and 16mm Height, 20 Teeth

2.[HIGH QUALITY MATERIAL] GT2 Aluminum Timing Belt Pulley has a high quality glossy finish and sturdy construction for longer life.

3.[Applications] GT2 timing belt system, especially suitable for linear movement, ideal for 3D belt with 6mm width.

4.[Fully equipped] Equipped with an Allen key.

PoPprint GT2 6mm 60 teeth 8mm bore Aluminum Timing Pulley for width 6 mm GT2 belt (Pack of 2)

3D Printer Timing Belts

Buy on Amazon Find on eBay

1.Model number : 2GT-6mm

2.Tooth number: 60

3.Tooth pitch: 2mm

4.Bore diameter: 8mm

5.Widely used in 3D printer, milling machine, gear shaper, drilling machine, CNC engine lathe etc.

PoPprint High-precision V6 Throat with PTFE Tube for E3d V6 hot-end Heating Block 1.75 mm 3D Printer Parts and Accessories (2pcs)

Buy on Amazon Find on eBay

1.PTFE lining heat break for E3D V6 hotend

2.Pack of 2pcs

3.[Advantage.] : It will not easily refult in clog during PLA printing. The relatively thinner 3mm tube wall will cause samller deforming than the 4mm pefe tube,soo the printing precision is relatively higher than 4.1 bore stely heat break.

4.[Disdavantages] : The printing temperature cannot exceed 250°C,therrby restricting the scope of available filament.Regular inspection and maintenance shall be carried our due to the 3mm PTFE Tube wear off.

PoPprint 5Pcs Ramps1.4 A4988 Stepper Motor Driver with Heatsink for 3D Printer (Green)

3D Printer Interface & Driver Modules

Buy on Amazon Find on eBay

A4988 driver modules:20*15*11mm,Heat Sink: 9*9*5mm

A4988 driver board widely used in 3D printers and small CNC machines.

Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16.

Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay).

3.3 and 5 V compatible logic supply.

BIGTREETECH DCDC MODE V1.0 Power Module for SKR V1.4 Turbo Motherboard 3D Printer Parts for DIY 3D Printer (2pcs)

3D Printer Controllers

Buy on Amazon Find on eBay

1. Packing List: DCDC MODE V1.0 Power Module(2pcs)

2. For: SKR V1.4 /Skr v1.4 Turbo control board

3. SKR V1.4 / v1.4 Turbo Reserved DCDC MODE V1.0 power module interface.

4. Support of TFT35, BL Touch.

5. Voltage: 5V

BIGTREETECH SKR MINI E3 V2.0 32bit Control Board with TMC2209 UART + TFT35 E3 V3.0 Touchscreen Control Board 3D Printer Parts for Creality Ender 3 CR10

3D Printer Controllers

Buy on Amazon Find on eBay

1.[Product Name] BIGTREETECH SKR MINI E3 V2.0 + TFT35 E3 V3.0, Supports Ender 3/ Ender 3 Pro/CR 10/CR10S Pro upgrade.

2.[SKR Mini E3 V2.0] Supports BL Touch, detection blocked rotation, resume power off, shutdown after shutdown, etc.Use an MP1584EN power chip that supports a 12-24V input.

3.[SKR Mini E3 V2.0] ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.

4.[TFT35 E3 V3.0] LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc)

5.[TFT35 E3 V3.0] ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate. Users can select two work modes:UART serial port screen mode and 12864 screen mode.

Read more Read less

PoPprint 2 Meters PTFE Teflon Bowden Tube (4.0mm OD/2.0mm ID)1.75mm Filament for 3D Printer (2m)

3D Printer Extruders

Buy on Amazon Find on eBay

Material: PTFE (Poly Tetra Fluoro Ethylene)

Outside Diameter:4mm, Inside Diameter:2mm

Color: White

PoPprint High-precision All-metal V6 Throat for E3D V6 Hot-end Heating Block 1.75 mm 3D Printer Parts and Accessories(2pcs)

Buy on Amazon Find on eBay

1.Size: V6 Bodwen

2.Material: All metal

3.Suit for: 1.75mm Filament

4.Screw Threads: M6

5.Heat break: Cost-effective

PoPprint MINI UPS V2.0 Upgrade Shut Off Print Module For SKR V1.3 SKR PRo GTR 3D Printer Control Card

3D Printer Controllers

Buy on Amazon Find on eBay

2.[Function] Monitor the power status etc. and realize print interaction. If the accidental power failure is ensured, the 3D printing system can fully store the printed data, which can effectively solve the negative effects of power failure on the printed parts, and is one of the more practical features of the 3D printer.

1.[MINI UPS_V2.0] can be used with BIQU-specified 3D printer motherboard. It can achieve the functions of resuming pressure while the device is accidentally switched off.

5.Version V2.0.

4.[Operating Voltage & Current] Operating voltage: 12V, Max current: 25A. The switch detection port outputs a low level when it works normally, and outputs a high level when it is turned off.

3.Atmega2560 chip: with atmega2560 and other chips, which are operated with 5V motherboard (e.g. For lpc1768 and other chips operating voltage of 3.3 V motherboard (for example: MKS S Base), turn the toggle switch to 3.3 V.

Read more Read less

BIGTREETECH GTR V1.0 32-Bit Control Board Support TMC2209 TMC2208 TMC2130 Driver TFT35 TFT24 for 3D Printer Parts

3D Printer Controllers

Buy on Amazon Find on eBay

※ 2. Touch Screens: BIGTREETECH GTR V1.0 supports TFT35 E3 V3.0, TFT35 V3.0, TFT28 V3.0 etc all BIGTREETECH TFT touch screens.

※ 1. BIGTREETECH GTR V1.0 motherboard adopts a 32-bit STM32F407IGT6 chip, Cortex-M4 series 168MHz ARM quality, which greatly improves the performance.

※ 5. Adopt special power supply chip, support 12-24V power input, It can accept 24V input and reduce the hot bed current to 1/4 under the same power, effectively solving the heating problem of hot bed MOS tube.

※ 4. BIGTREETECH GTR V1.0 supports functions such as resume printing while power off, filament detection, support BL Touch, automatic shutdown after power off.

※ 3. Motor Driver: Support TMC5160 TMC2208 TMC2209 TMC2130 ST820 LV8729 DRV8825 A4988 etc. Driver, working mode support: TMC2130SPI TMC5160SPI TMC2208 UART.

Read more Read less

PoPprint Cost effective 1.75/0.4 mm V6 Brass Nozzle for M6 Nozzles Kossel Titan Extruder J-Head & MK8 Ender-3 CR-10 (2pcs)

3D Printer Extruders

Buy on Amazon Find on eBay

1.[Product Name: 3D v5/v6 Nozzle] Adopt brand raw material, uniform spinning increase melting rate and printing speed

2. [Electroplated copper nozzle:] corrosion resistant, high temperature resistant, durable, suitable for high temperature 3D printing that other nozzles cannot handle

3. [Cost-effective ] Quenching nozzle high temperature resistance, wear resistance, durable, suitable for printing PEEK, carbon fiber and other materials

4.[Smooth] The inner wall is smooth and burr-free, the viscosity coefficient is small, and the silk is smoother.

5.[Deburring treatment] Four major processes, strict quality assurance. No burrs anti-oxidation and clean surface.Reduce blockage of hotend due to the poor nozzle quality

Read more Read less

PoPprint FAQs

How much do PoPprint products cost?

PoPprint GT2 20 Teeth 5 mm Bore Aluminium Pulley f... is the top 1 product we recommend in the PoPprint buying guide, which is priced at £0, you can view it on Amazon page.
PoPprint GT2 6mm 60 teeth 8mm bore Aluminum Timing... is one of the popular products we recommend in the PoPprint buying guide, which is priced at £7.99, you can view it on Amazon page.
PoPprint GT2 6mm 60 teeth 8mm bore Aluminum Timing... is the cheapest product in the PoPprint picks list, which is priced at £7.99, you can view it on Amazon page.
BIGTREETECH SKR MINI E3 V2.0 32bit Control Board w... is the most expensive product in the PoPprint picks list, which is priced at £95.99, you can view it on Amazon page.

Where can you buy PoPprint products?

You can purchase PoPprint products from the seller PoPprint Direct, over the last 12 months, the seller has received honest feedback from 120 consumers, and the average rating is 4.68. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of PoPprint?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and PoPprint is worth your consideration.

Similar Brands