Skip to content
AITRIP feature image

AITRIP

4.8
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the AITRIP range from £7.99 to £28.99, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. AITRIP provides their products for a reasonable price, which means the products cost around £14.02 on average. They are affordable options to make your shopping much easier.

AITRIP offers 127 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. Our AITRIP review dives deep into the brand, and introduces you to their bestselling products. Let's get into it!

Share

AITRIP Best Sellers

Last Updated: 14 Jun 2023

3 pack ESP32 ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-In-1 Microcontroller ESP-WROOM-32 Chip CP2102 for Arduino (3PCS)

3 pack ESP32 ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-In-1 Microcontroller ESP-WROOM-32 Chip CP2102 for Arduino (3PCS) Cover
  • Support LWIP protocol, Freertos
  • 2.4GHz Dual Mode WiFi + Bluetooth Development Board
  • Ultra-Low power consumption, works perfectly with the Arduino IDE
Buy on Amazon Find on eBay

10pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions

10pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions Cover
  • Maximum charging current output: 1000mA
  • Input interface: Type-c USB
  • Charging cut-off voltage: 4.2V ± 1%
Buy on Amazon Find on eBay
Car Audio Power Inverters

5 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module

5 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module Cover
  • Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A
  • Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost)
  • Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)
Buy on Amazon Find on eBay
USB Fans for Cooling USB Fans

50mm Fan 5V USB Brushless DC Cooling Fan, 4 Pack Speed 4200 RPM Fan for Small Appliances Series Replacement (4 PCS 5010 5V USB)

50mm Fan 5V USB Brushless DC Cooling Fan, 4 Pack Speed 4200 RPM Fan for Small Appliances Series Replacement (4 PCS 5010 5V USB) Cover
  • Airflow: 3CFM, Speed: 4200±5%PRM, Noise: 22 DBA.
  • Fan size: 50x50x10mm(L*W*H); Rated Voltage: 5V DC, Current: 0.21A.
  • Package Included: 4 * DC 5V brushless cooling fans.
Buy on Amazon Find on eBay
Temperature Probes & Sensors Thermocouples

AITRIP 5pcs DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V with Wires for Arduino Raspberry Pi 2 3

AITRIP 5pcs DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V with Wires for Arduino Raspberry Pi 2 3 Cover
  • Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.
  • DHT11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability.
  • Working voltage: DC 3.3V-5V.Output form: digital output.
Buy on Amazon Find on eBay

AITRIP 3 pcs 0.96 OLED Display Module IIC 128 x 64 Pixel 12864 OLED Yellow Blue I2C 0.96inch OLED Display IIC Serial with SSD1306 Chip for Arduino UNO Raspberry Pi (3PCS) (3PCS)

AITRIP 3 pcs 0.96 OLED Display Module IIC 128 x 64 Pixel 12864 OLED Yellow Blue I2C 0.96inch OLED Display IIC Serial with SSD1306 Chip for Arduino UNO Raspberry Pi (3PCS) (3PCS) Cover
  • Supported voltage: 3.3V-5V DC；Driver IC: SSD1306
  • Fully compatible with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc
  • Communication: IIC, only two I/O ports； Viewing angle: greater than 160 degrees
Buy on Amazon Find on eBay
Temperature Probes & Sensors Thermocouples

2pcs DHT22/AM2302 Digital Temperature and Humidity Sensor Module Temperature Humidity Monitor Sensor Replace SHT11 SHT15 for Arduino Electronic Practice DIY

2pcs DHT22/AM2302 Digital Temperature and Humidity Sensor Module Temperature Humidity Monitor Sensor Replace SHT11 SHT15 for Arduino Electronic Practice DIY Cover
  • Temperature Range: -40 ℃ ~ 80 ℃， Humidity Range: 0~100%RH
  • Operate Voltage: DC 3~5.5V
  • Main Chip: AOSONG AM2302 High Sensitive Temperature Humidity Sensor.
Buy on Amazon Find on eBay
GPS Module Receivers

AITRIP GT-U7 GPS Module GPS Receiver Navigation Satellite with EEPROM Compatible with 6M 51 Microcontroller STM32 UO R3+ IPEX Active GPS Antenna for Arduino Drone Raspberry Pi Flight (2PCS)

AITRIP GT-U7 GPS Module GPS Receiver Navigation Satellite with EEPROM Compatible with 6M 51 Microcontroller STM32 UO R3+ IPEX Active GPS Antenna for Arduino Drone Raspberry Pi Flight (2PCS) Cover
  • With a USB interface, you can directly connect it with computer. That is, with the host computer-owned serial port function, no need for external serial module. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
  • GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M.
  • Operating voltage: 3.6V-5V (or direct usb power supply);Operating baud rate: 9600 (can be modified)
Buy on Amazon Find on eBay
Thermometers for Terrariums

AITRIP 5PCS Digital Thermometer Hygrometer Mini Probe Thermometers Temperature Humidity Gauge Meter for Reptile Incubator Poultry Office Living Room black

AITRIP 5PCS Digital Thermometer Hygrometer Mini Probe Thermometers Temperature Humidity Gauge Meter for Reptile Incubator Poultry Office Living Room black Cover
  • Come with 1.5M probe; 2 in 1 digital electronic thermometer and hygrometer for measuring temperature and humidity for indoor use.
  • Application：the mini LCD digital thermometer hygrometer with probe is very popular, widely used in living room, greenhouse, musical instrument room, wine cellar, cellar, warehouse, granary, baby room, cloakroom.
  • Temperature measurement range: -50-70 ℃, accuracy up to +/-1 ℃ Celsius Degree(under normal temperature); Humidity measurement range: 10%-99%, accuracy +/-5%.
Buy on Amazon Find on eBay
Digital Thermostats Switch Thermostats

AITRIP 3pcs W1209 12V DC Red Digital Temperature Controller Board with 10A One-channel Relay and Waterproof Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch

AITRIP 3pcs W1209 12V DC Red Digital Temperature Controller Board with 10A One-channel Relay and Waterproof Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch Cover
  • Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.
  • The W1209 thermostat module has a STM8S controller, a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature
Buy on Amazon Find on eBay
Arduino Motherboards Motherboards

AITRIP 6pcs for Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino nano AVR ATMEGA328P

AITRIP 6pcs for Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino nano AVR ATMEGA328P Cover
  • No soldering required. Size is about 2.21" x 1.65" x 0.50" (L* W* H)
  • Designed for Nano V3.0: The item is a terminal expansion adapter, working very well for prototyping for Nano projects
  • You can use this adapter to easily hook up for arduino for Nano to an outside world via hook up wires
Buy on Amazon Find on eBay
IO Modules

4pcs ESP32 ESP-32 WiFi+Bluetooth Internet of Things Development Board Based ESP8266 Fully Functional for arduino

4pcs ESP32 ESP-32 WiFi+Bluetooth Internet of Things Development Board Based ESP8266 Fully Functional for arduino Cover
  • 100% compatible with Arudino IDE, Lua and Micropython
  • Wireless WiFi Bluetooth 2 in 1 dual-core CPU module MINI KIT ESP32 module development board module
  • It has a similar pin layout to the conventional ESP8266-12F and is therefore pin-compatible with most accessories for it.
Buy on Amazon Find on eBay
Car Audio Power Inverters

AITRIP 2 PCS Double USB Car Converter Module 12V to 5V 3A 15W Power Adapter DC to DC Reduced Voltage Regulator Car Power Converter Output Power Adapter

AITRIP 2 PCS Double USB Car Converter Module 12V to 5V 3A 15W Power Adapter DC to DC Reduced Voltage Regulator Car Power Converter Output Power Adapter Cover
  • 12V to 5V USB converter: input voltage: 12V DC; Output voltage: 5V; Output current: 3A max; No-load current:10mA; Output power:15W max
  • Reliable, low heat dissipation
  • Intelligent protection: 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature, short circuit, it can be auto protection
Buy on Amazon Find on eBay
Conditional Access Modules

AITRIP 5 PCS PDC004-PD PD Decoy Module, USB-C PD 9V DC Fixed Voltage Power Trigger Module 5A Type-C Female Input for Notebook

AITRIP 5 PCS PDC004-PD PD Decoy Module, USB-C PD 9V DC Fixed Voltage Power Trigger Module 5A Type-C Female Input for Notebook Cover
  • It is a 9V PD decoy.It can induce the required voltage from the power supply or charger to power the product.
  • Performs PD power negotiation Supports up to 5A
  • Power an electronic project or convert old hardware to use USB-C power input
Buy on Amazon Find on eBay
Industrial Power Supply

8 Pack Mini MP1584EN DC-DC Buck Converter Adjustable Power Supply Module 24V to 12V 9V 5V 3V

8 Pack Mini MP1584EN DC-DC Buck Converter Adjustable Power Supply Module 24V to 12V 9V 5V 3V Cover
  • Output Current: 1.8 A typical (3.0 Max),Ripple Voltage: 30mV
  • Input voltage: 4.5 V to 28 V; Output voltage: 0.8 V to 20 V
  • Package include: 8 pack ultra small MP1584EN DC to DC buck converter module with a wide operating range
Buy on Amazon Find on eBay
Industrial Capacitors

AITRIP 24Value 500pcs Aluminum Electrolytic Capacitor Assortment Box Kit Range 0.1uF－1000uF

AITRIP 24Value 500pcs Aluminum Electrolytic Capacitor Assortment Box Kit Range 0.1uF－1000uF Cover
  • 0.1uF to 1000pF Electrolytic Capacitors
  • 24 types 500 pcs 16 ~ 50V
  • Suitable for a wide range of electronic applications, quite good accessory for DIY.
Buy on Amazon Find on eBay
Motherboards

AITRIP 10pcs PCF8574 IO Expansion Board I/O Expander I2C-Bus Evaluation Development Module for Arduino & Raspberry Pi

AITRIP 10pcs PCF8574 IO Expansion Board I/O Expander I2C-Bus Evaluation Development Module for Arduino & Raspberry Pi Cover
  • Typical application: I / O resource shortage MCU I / O expansion
  • PCF8574 IO expansion chip with I2C interface, 8-bit parallel port output
  • Package Included: 10pcs x PCF8574 IO Expansion Board I/O Expander I2C-Bus Evaluation Development Module
Buy on Amazon Find on eBay
Motherboards

3 pack ESP32 ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-In-1 Microcontroller ESP-WROOM-32 Chip CP2102 for Arduino

3 pack ESP32 ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-In-1 Microcontroller ESP-WROOM-32 Chip CP2102 for Arduino Cover
  • Support LWIP protocol, Freertos
  • 2.4GHz Dual Mode WiFi + Bluetooth Development Board
  • Ultra-Low power consumption, works perfectly with the Arduino IDE
Buy on Amazon Find on eBay

AITRIP FAQs