Skip to content
KOOKYE feature image

KOOKYE

4.5
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the KOOKYE range from £9.28 to £50.39, and the average price of all the products is about £30.19. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

KOOKYE has a relatively small number of products for sale, only 21. We analyzed some of them in detail and recommended them to our readers. This KOOKYE review will give you insight into the products they offer so you can make a better informed decision before you make your purchase.

Share

KOOKYE Best Sellers

Last Updated: 14 Jun 2023

3D Printer Controllers

KOOKYE 3D Printer Parts MKS DLC32 Offline Controller 32bits ESP32 WIFI GRBL for desktop laser engraving machine

KOOKYE 3D Printer Parts MKS DLC32 Offline Controller 32bits ESP32 WIFI GRBL for desktop laser engraving machine Cover
  • 1.The motherboard uses the ESP32-WROOM-32U module,which embeds a dual-core 32-bit high-speed MCU with a clock up to 240MHz.And integrated WIFI, Bluetooth module ,the performance is very powerful .In addition , the module has a built-in 8M byte Flash memory chip ,which provides effective protecyion for more application scenarios .
  • 2.Thanks to the high-speed IO flip speed of the main control module and a powerful timer ,MKS DLC32 can achieve a very high-speed en-graving speed ,which we measured can reach 8000mm/min .
  • 3.The PWM frequency of MKS DLC32 can be as high as tens of KHz(the traditional scheme is lower than 980Hz ),which fully meets the needs of various semiconductor laser heads .The engraving effect is more delicate than the traditional desktop engraving scheme, and the grayscale expression is smoother.
Buy on Amazon Find on eBay
3D Printer Controllers

KOOKYE 3D Printer Parts MKS TS35-R 3.5 touch screen for DLC32 Offline Controller

KOOKYE 3D Printer Parts MKS TS35-R 3.5 touch screen for DLC32 Offline Controller Cover
  • Network operation for DLC32 control board.
  • 3.5 inch touch screen, simple operation interface and high sensitivity
  • TS35-R is only compatible with MKS DCL32 offline controller motherboard
Buy on Amazon Find on eBay
3D Printer Motors

KOOKYE SERVO42C NEMA17 closed loop stepper motor Driver CNC 3d printer parts prevents losing steps Built-in 0.42 inch oled for Gen_L SGen_L

KOOKYE SERVO42C NEMA17 closed loop stepper motor Driver CNC 3d printer parts prevents losing steps Built-in 0.42 inch oled for Gen_L SGen_L Cover
  • 1.Easy to install and wire. Position/speed/ torque closed-loop , it can run at high speed without losing step.
  • 2.Field-Oriented Control , low noise ,low vibration and Low calorific. SPEED ——High-speed printing and lose no steps.
  • 3.4 Half bridge driver with 8 MOSFET, high operating efficiency. 14bit magnetic encoder，high angle resolution.
Buy on Amazon Find on eBay
3D Printer Controllers

KOOKYE 3D Printer Parts MKS Robin nano Integrated Circuit mainboard Controller Motherboard with Robin TFT35 Display closed source software with FFC Line & USB Cable

KOOKYE 3D Printer Parts MKS Robin nano Integrated Circuit mainboard Controller Motherboard with Robin TFT35 Display closed source software with FFC Line & USB Cable Cover
  • 1.Use 32-bit high speed ARM chip and self-developed firmware . With 3.5 inch touch screen ,simple operation interface and high sensitivity .
  • 2.It has Auto off module to achieve the Auto off function .With high-speed WIFI module ,access to the cloud to achieve remote printing .Support the following function :resume from the breakpoint ,power save ,power outage detection and auto off.
  • 3.Support 4988, 8825 and all kinds of in-line drivers.And support external drives.So it can flexible to meet your driver needs.
Buy on Amazon Find on eBay

KOOKYE Stepper Motor Driver TMC2209 Stepstick Stepper with Heat Sink Screwdriver for 3D Printer Ramps1.4 MKS SGEN-L, 5 Pcs

KOOKYE Stepper Motor Driver TMC2209 Stepstick Stepper with Heat Sink Screwdriver for 3D Printer Ramps1.4 MKS SGEN-L, 5 Pcs Cover
  • 1.Support UART Model ,Perfect for use with MKS SGEN-L ,don't need jumpers.
  • 2. Larger drive current, maximum peak current up to 2.5A, stable print current up to 1.8A
  • 3. The spreadCycle high chopping frequency, dcStep, stallGuard2 blockage detection technology.
Buy on Amazon Find on eBay
3D Printer Motors

KOOKYE SERVO42B NEMA17 STM32 closed loop stepper motor Driver CNC 3d printer parts prevents losing steps for 3D Printer MKS Gen L SGen L

KOOKYE SERVO42B NEMA17 STM32 closed loop stepper motor Driver CNC 3d printer parts prevents losing steps for 3D Printer MKS Gen L SGen L Cover
  • PRINTING SPEED ——High-speed printing and lose no steps.
  • CHIP——The SMT32 chip adopts higher frequency, faster processing speed, high cost performance, convenient installation and simple structure;
  • SETTING ——It is easy to operate by adjusting parameters through the screen. The closed loop motor is feedback.
Buy on Amazon Find on eBay
3D Printer Interface & Driver Modules

KOOKYE TMC2208 Stepper Motor Driver UART Model Stepstick Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Ramps1.4 MKS Gen Anycubic Ender 3 Pro

KOOKYE TMC2208 Stepper Motor Driver UART Model Stepstick Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Ramps1.4 MKS Gen Anycubic Ender 3 Pro Cover
  • 1. The spreadCycle high chopping frequency, dcStep, stallGuard2 blockage detection technology.
  • 2. The coolStep dynamic current regulation technology, can save 70% of energy, StealthChop mute.
  • 3. TRINAMIC's stepper motor driver (chopper drive / constant current drive).
Buy on Amazon Find on eBay
3D Printer Interface & Driver Modules

KOOKYE 3D Printer Stepper Motor Driver TMC2208 Stepstick Stepper Motor Driver Module Carrier UART Model with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps1.4 MKS Gen

KOOKYE 3D Printer Stepper Motor Driver TMC2208 Stepstick Stepper Motor Driver Module Carrier UART Model with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps1.4 MKS Gen Cover
  • The coolStep dynamic current regulation technology, can save 70% of energy, StealthChop mute.
  • : The spreadCycle high chopping frequency, dcStep, stallGuard2 blockage detection technology.
  • : TRINAMIC's stepper motor driver (chopper drive / constant current drive).
Buy on Amazon Find on eBay

KOOKYE 360 Degree Continuous Rotation Micro Servo Motor for Smart Car Robot Helicopter

KOOKYE 360 Degree Continuous Rotation Micro Servo Motor for Smart Car Robot Helicopter Cover
  • he duration of high level corresponds to a speed. When high level is 1ms~1.5ms, servo rotates forward(the rotate speed is the fastest when it is 1ms, the higher the lower, servo will stop rotating when reaching 1.5ms).
  • The signal terminal needs to be input with one 50 HZ square wave, then the duration of high level pulse, which is used to control signal cycle, can control speed and forward/backward rotation as well as stalling
  • When high level is 1.5 ~2ms, the servo rotates backward(The servo stops rotating when reaching 1.5ms, when the duration is closer to 2ms, the closer, the faster. The backward rotation speed, the fastest when reaching 2ms)
Buy on Amazon Find on eBay
Sewing Thread

KOOKYE Conductive Thread 2 Bobbins 65ft/20m 45 Ω/m Smooth Sewable for Arduino Lilypad with Needle Threader

KOOKYE Conductive Thread 2 Bobbins 65ft/20m 45 Ω/m Smooth Sewable for Arduino Lilypad with Needle Threader Cover
  • Super Low Resistance & Ultra High Condutive Performance:It means the resistance is as low as about 45(Ω/m).Suitable for hand or machine sewing (as a bobbin thread).
  • Silber Fiber: What sets this thread apart from the other conductive thread that we carry is the fact that it's actually spun from silver fiber making it incredibly smooth and without the loose hairs seen on other Robbins.
  • This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat.
Buy on Amazon Find on eBay
3D Printer Motors 3D Printer Interface & Driver Modules

3D Touch Auto-Levelling Sensor, Auto Bed Leveling Sensor, Touch Smart Sensor For 3D Printers, Improve Printing Precision

3D Touch Auto-Levelling Sensor, Auto Bed Leveling Sensor, Touch Smart Sensor For 3D Printers, Improve Printing Precision Cover
  • Features: simple, smart and precise. It could work with almost any kind of bed materials, such as glass, wood, metal and so on.
  • 3D printer touch is an auto-levelling sensor for 3D printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D printer.
  • The main functions and controls of 3D touch printer are the same as most auto bed levelling sensors, which consists of a RC servo and a micro switch, thus, 3D touch printer can be used on almost any 3D printer control board.
Buy on Amazon Find on eBay
Circuit Breaker Panels

KOOKYE Pro Micro ATmega32U4 5V/16MHz Module Board with 2 row pin header for arduino Leonardo Replace ATmega328 Arduino Pro Mini

KOOKYE Pro Micro ATmega32U4 5V/16MHz Module Board with 2 row pin header for arduino Leonardo Replace ATmega328 Arduino Pro Mini Cover
  • [Multi-channels] -This tiny little board does all of the neat tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.
  • [ATmega32U4 microcontroller] -The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.
  • [Voltage regulator] -There is a voltage regulator on board so it can accept voltage up to 9V DC.The maximum voltage allowed on the RAW pin is 9V, 6-7V input recommended. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
Buy on Amazon Find on eBay

KOOKYE 20 in 1 Smart Home Sensor Modules Kit for Arduino Raspberry Pi DIY Professional

KOOKYE 20 in 1 Smart Home Sensor Modules Kit for Arduino Raspberry Pi DIY Professional Cover
  • THE PROFESSIONAL SMART HOME KIT--This has 16 sensors modules and delicately selected sensors to detect temperature, humidity, sound, light, infrared, motion, flame,vibration,digital touch, air pressure and many other commonly-used sensors modules.
  • SMART HOME LEARNING KIT--This kit combines the most common electronic components of smart home projects,developed specially for those beginners who are interested in Arduino and raspberry pi DIY.
  • THE MOST COMPLETE SMART HOME KIT--This universal kit are compatible for Arduino UNO R3 / Mega2560 / Mega328 /Nano / Raspberry Pi, it could DIY 16 projects according to your need.
Buy on Amazon Find on eBay
HDMI Cables

Kookye Mini Converter, 1080P, HDMI2HDMI, Audio HD Converter, HDMI to HDMI Audio Extractor, Adaptor Switch, Video Audio Converter Adaptor for PC, Laptop, HDTV Projector

Kookye Mini Converter, 1080P, HDMI2HDMI, Audio HD Converter, HDMI to HDMI Audio Extractor, Adaptor Switch, Video Audio Converter Adaptor for PC, Laptop, HDTV Projector Cover
  • With hot swap – used with no external drivers or power required, is designed to be used with portable devices such as gamepads, wires keyboards, USB flash drives, memory cards, etc. No need for downloading.
  • Low power, no power adaptor, with USB-C interface and OTG function. Especially great for devices which come with only a few ports. Able to connect all USB 2.0/3.0 devices such as keyboard, mouse, thumb drive, phone and access files from card reader slots.
  • Plug and play, transmission rate 4 mbps, work radius 10 m, work frequency 2480 MHz. 5V micro power supply, operating current is less than 38 mA, no internal battery, external power supply.
Buy on Amazon Find on eBay
Proximity Sensors Inductive Proximity Sensors

KOOKYE 8mm Detecting Distance Approach Sensor Inductive Proximity Switch NPN NO DC 6-36V Cylinder Type

KOOKYE 8mm Detecting Distance Approach Sensor Inductive Proximity Switch NPN NO DC 6-36V Cylinder Type Cover
  • Wire Type : DC 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type; Material : Plastic, Alloy;
  • Item Name : Inductive Proximity Switch; Model : LJ18A3-8-Z/BX; Package Qty: 1 Piece Switch
  • Theory : Inductive Sensor; Output Type: NPN NO(Normal Open);Diameter of Head : 18mm;Detecting Distance : 8mm
Buy on Amazon Find on eBay
Temperature Probes & Sensors Thermocouples

KOOKYE 10PCS Temperature Sensors TMP36 Precision Linear Analog for Arduino

KOOKYE 10PCS Temperature Sensors TMP36 Precision Linear Analog for Arduino Cover
  • 10PCS TMP36 temperature sensors,High accuracy solid state temperature sensor
  • Voltage Input: 2.7V to 5.5V DC
  • Output range: 0.1V (-40¡ãC) to 2.0V (150¡ãC)
Buy on Amazon Find on eBay

Starter Learning Kit for Arduino with UNO R3 Board and CD tutorials

Starter Learning Kit for Arduino with UNO R3 Board and CD tutorials Cover
  • Perfect for Beginners & Pros--This Kit includes the KOOKYE Board (fully compatible with Arduino UNO R3),developed specially for those beginners who are interested in Arduino. You could separately buy a raspberry pi board or nodemcu esp8266 wifi modules separately to continue to learn these universal sensor modules.
  • Universal Sensor Kit--This sensor modules in this universal kit not only can be used for arduino( Board for arduion Included), but also for raspberry pi and nodemcu esp8266 (Raspberry pi board and nodemcu esp8266 modules not included).
  • The Advanced Kit for Arduino is designed to achieve the goal, a quick start for beginners and to do experiments with advance embedded system for experience professionals. Much like the Basic Starter Kit before it — but better!
Buy on Amazon Find on eBay

KOOKYE 2PCS 360 Degree Unlimited Rotation Micro Servo Motor for TeleCar Robot Helicopte

KOOKYE 2PCS 360 Degree Unlimited Rotation Micro Servo Motor for TeleCar Robot Helicopte Cover
  • KOOKYE 2PCS 360 Degree Unlimited Rotation Micro Servo Motor for TeleCar Robot Helicopte ...
Buy on Amazon Find on eBay

KOOKYE FAQs