KINGPRINT

4.7

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the KINGPRINT range from £11.99 to £79.99, and the average price of all the products is about £33.81. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

KINGPRINT has a relatively small number of products for sale, only 23. We analyzed some of them in detail and recommended them to our readers. The KINGPRINT review will examine the core factors of the brand and its products to help you make an informative buying decision.

KINGPRINT Best Sellers

Last Updated: 14 Jun 2023

BIGTREETECH TFT35 E3 V3.0 Graphic Smart Display Controller Board for Ender 3

3D Printer Controllers

Buy on Amazon Find on eBay

1）ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.

2）This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.

3）Reserve WIFI port, and WIFI function is realized by external WIFI module；Reserve the extension port of filament breaking detection (FIL-DET).

4）Reserve the extension port of automatic shutdown after printing (PS-ON);

5）LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)

KINGPRINT TMC2209 V1.2 Stepper Motor Driver 2.8A Peak Driver 3D Printer Parts for SKR V1.3 SKR PRO V1.1

3D Printer Interface & Driver Modules

Buy on Amazon Find on eBay

A large surface thermal pad, reduce the temperature of driving work.

The motor is not easy to lose step, ultra-quiet mode.

Support STEP / DIR and UART mode.

Stable detection.

Avoid engine shaking

Kingprint TMC2208 V3.0 Stepper Damper with Heat Sink Driver, Replacement Damper for A4988 DRV8825 for 3D Printer (5 pieces)

3D Printer Interface & Driver Modules

Buy on Amazon Find on eBay

Microsteps can be set arbitrarily by firmware (up to 256 actual microsteps)

TMC2208 V3.0 UART motor current can be arbitrarily set by firmware

When the motor is not moving, the motor standby current can be dynamically reduced (via UART)

TMC2208 V3.0 adopts the high quality flat gold finish,which is more stable,has strong oxidation resistance and better heat dissipation.

Combine actual and interpolated microsteps for maximum torque

BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130 (with 5TMC2209)

3D Printer Controllers

Buy on Amazon Find on eBay

TMC2209--A large area of thermal pad, reduce the temperature of the driving work;

TMC2209--The motor is not easy to lose step; ultra-quiet mode;

TMC2209--Prevent motor shake;Support stall detection;Support STEP / DIR and UART mode

SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.

BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

KINGPRINT TMC2208 v3.0 Stepper Mute with Heat Sinks Driver Stepstick Mute Replacement A4988 Drv8825 for 3D Printer(Pack of 4 PCS)

3D Printer Interface & Driver Modules

Buy on Amazon Find on eBay

The flexible Microplyer interpolation unit can provide up to 256 subdivision, even in a system with limited pulse frequency, sine control can be perfectly realized.

TMC2208 is a super mute two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2 A, voltage range 4.75v-36v,256 subdivision.

With standard Step/dir interface, it is simple and convenient to use.

The high load driver does not lose its step, and the TMC2208 of the spreadcycle mode guarantees that the stepper motor will smooth over 0 o'clock without the dead-zone current.

STEALTHCHOP2 Ultra Mute technology can drive motor work in the case of extreme mute, can realize the control motor sound under 10dB decibels, the noise is much lower than the traditional current control mode.

KINGPRINT TMC2130 V3.0 SPI Stepper Motor StepStick Mute Silent Driver with Heatsink for 3D Printer Control Board 4 Packs (SPI)

3D Printer Interface & Driver Modules

Buy on Amazon Find on eBay

Highlights: TMC2130 V2.0 is a new module that has been optimized .

The chip is facing down, the pure gold process, and the heat dissipation function is strengthened.

Working Performance: The use of sequexternal sequencer can greatly reduce the working load of the chip, effectively avoiding the errors caused by the chip overload, the missing step and the trouble.

Note: This module is similar to TMC2100, which produces a lot of thermal energy at work.Therefore, in the use of the process, it is necessary to increase the radiator and cooling fan to cool, reduce the loss of the steps and operating deviations.

Compatible: MKS Gen V1.4/mks Gen L v1.0/ramps 1.6/SKR V1.3 and so on.

KINGPRINT 60 teeth Aluminum Bore 8mm GT2 Timing Pulley for Width 6mm for3D Printer Parts(Pack of 2pcs)

3D Printer Timing Belts

Buy on Amazon Find on eBay

Material: Aluminum

Product Name: 60 teeth GT2 Timing Pulley

Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions

Type: Ball

KINGPRINT 3D Printer Mechanical Limit Switch with 70cm Cable for 3D Printer Ramps 1.4 (Pack of 5pcs)

Buy on Amazon Find on eBay

FOR REPRAP 3D PRINTER OR CNC MACHINES---which are supported by RepRap Electronics,

EASY USE--- The interface is simple, it's not easy to break.

RAMPS 1.4 and other popular RepRap boards.

OUR PROMISE---High quality assurance, comprehensive after-sales service.

Kingprint TMC2208 V3.0 Stepper Damper with Heat Sink Driver, Replacement Damper for A4988 DRV8825 for 3D Printer (4 pieces) (TMC2208-V3.0-UART)

Buy on Amazon Find on eBay

Kingprint TMC2208 V3.0 Stepper Damper with Heat Sink Driver, Replacement Damper for A4988 DRV8825 for 3D Printer (4 pieces) (TMC2208-V3.0)

3D Printer Interface & Driver Modules

Buy on Amazon Find on eBay

KINGPRINT FAQs

How much do KINGPRINT products cost?

BIGTREETECH TFT35 E3 V3.0 Graphic Smart Display Co... is the top 1 product we recommend in the KINGPRINT buying guide, which is priced at £54.99, you can view it on Amazon page.
KINGPRINT TMC2209 V1.2 Stepper Motor Driver 2.8A P... is one of the popular products we recommend in the KINGPRINT buying guide, which is priced at £33.99, you can view it on Amazon page.
KINGPRINT 60 teeth Aluminum Bore 8mm GT2 Timing Pu... is the cheapest product in the KINGPRINT picks list, which is priced at £11.99, you can view it on Amazon page.
BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel... is the most expensive product in the KINGPRINT picks list, which is priced at £79.99, you can view it on Amazon page.

Where can you buy KINGPRINT products?

You can purchase KINGPRINT products from the seller KINGPRINTER, over the last 12 months, the seller has received honest feedback from 37 consumers, and the average rating is 4.73. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of KINGPRINT?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and KINGPRINT is worth your consideration.

Who are the manufacturers of the KINGPRINT products?

Most of the KINGPRINT products are produced by BIGTREETECH. The manufacturer provides KINGPRINT with a steady supply of products, and they have a good cooperative relationship with each other.

Similar Brands