ALAMSCN

4.9

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the ALAMSCN range from £6.99 to £15.58, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. ALAMSCN provides their products for a reasonable price, which means the products cost around £10.16 on average. They are affordable options to make your shopping much easier.

ALAMSCN offers 88 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. This ALAMSCN review will give you insight into the products they offer so you can make a better informed decision before you make your purchase.

ALAMSCN Best Sellers

Last Updated: 14 Jun 2023

ALAMSCN 5 Set 433MHz RF Wireless Transmitter and Receiver Module + RF 433MHz Spring Antenna Kit Compatible with Arduino

Wireless Car Audio FM Transmitters Car Audio FM Transmitters

Buy on Amazon Find on eBay

Low-power performance, along with high dynamic range (greater than 60dB). Module uses highly integrated chip, built front-end low-noise amplifier,Mixers, filters, frequency synthesizer circuit, etc., can maximize the signal optimization.

RX470-4 superheterodyne wireless receiver module is receiving UHF ASK demodulators support ASK and OOK modulation. The receiver module has high sensitivity (-108dBm)

Widely use for receiver module, remote control rolling gates, remote control MP3, remote control LED, remote control audio, smart car, smart home, etc.

The transmitter module integrates an analog PLL circuit and ASK modulation circuit, with a high level of integration, etc., can be applied with a short-range wireless communications.

Good local oscillator radiation suppression, multiple receiver module to work with (ie, more than single income) and will not interfere with each other, used together without affecting the receiving distance.

Read more Read less

ALAMSCN 2PCS HD44780 1602 16x2 LCD Display Module + 2PCS IIC I2C Adapter IIC LCD Serial Interface Adapter, Blue Backlight Display Board

LCD Graphic Displays

Buy on Amazon Find on eBay

1602 Blue Backlight LCD display with I2C serial interface backpack; LCD screen can display 2-lines x 16-characters; The I2C LCD adapter built-in industry standard equivalent LCD controller.

LCD display with I2C serial interface has 2 bidirectional data lines, a serial data line and a serial clock. Through the IIC/I2C interface, it only occupies two I/O ports, thus saving more space for other uses.

To come with a potentiometer, which is applied to adjust backlight and contrast; How to wire: GND-GND; VCC-VCC; SDA-A4; SCL-A5.

Compatible with all current development boards.

LCD display with I2C serial interface can be applied to display characters, letters and numbers, real-time clocks, temperature, humidity; suitable for copiers, fax machines, industrial testing equipment, and network equipment such as routers and storage devices.

Read more Read less

ALAMSCN Charging Port Dock Connector for Samsung SM-T290 Charging Port Flex Cable Replacement with Repair Tool Kits

Buy on Amazon Find on eBay

[Compatibility] This replacement charging port flex cable is only compatible with the Samsung Galaxy SM-T290. Please check and confirm the phone model before purchasing this Item.

[Brand New Original Quality] Charging Port Replacement for Samsung Galaxy SM-T290, all of the replacement part was double tested by technicians before packing and shipping.

[Repair Tool Kit] 8 in 1 repair tool kit includes: 1 x 1.5 phillips screwdriver, 1 x 2.0 flat head screwdriver, 1 x 0.8 pentalobe screwdriver; 2 x plastic Triangle Pick; 2 x plastic spudger; 1 x mini suction cup.

[Guarantee] Please rest assured to buy our Charging Port Flex Cable for Samsung, we provide good after-sales services. If you have any questions, please contact us in time. Our customer service team will help you solve the problem.

[Charging Port Dock Connector Replacement Part] Easy to install, please install it under a professional video on YouTube. Replacements not follow proper repair procedures could result in improper function or issues.

Read more Read less

ALAMSCN 6PCS Closed Loop Timing Belt 110mm 122mm 158mm 200mm 300mm 400mm + 2PCS GT2 Timing Belt Pulley 20 Teeth 5mm Bore for 3D Printer

3D Printer Timing Belts

Buy on Amazon Find on eBay

[Package Include] 6pcs closed timing belt, 110 mm, 122 mm, 158 mm, 200 mm, 300 mm, 400 mm, width: 6 mm; 2pcs timing belt pulley 20 Teeth 5mm Bore.

[Closed Loop Rubber Belt] The GT2 timing belt is made of premium rubber, durable and flexible. It's designed specifically for linear motion, high positioning accuracy.

[Multiple Uses] Wide rubber timing belt and pulley are suitable for 3D printer, dishwashers, packaging machinery, dryer, food machinery, ect.

[2GT Timing Belt] 2GT system is an extension of the HTD system with greater load carrying capacity. Circular arc tooth profile tooth space is small, suitable for straight line driving.

[20 Teeth Timing Pulley] Adopt high-quality aluminum with timing belt, excellently machined, finished smoothly. The timing pulley with 20 teeth contact with the belt which minimizes the risk of the belt slipping.

Read more Read less

ALAMSCN 6PCS AHT10 Digital Temperature and Humidity Sensor Measurement Module I2C Communication Replace

Temperature Probes & Sensors Thermocouples

Buy on Amazon Find on eBay

The AHT10, a new generation of temperature and humidity sensors, it is embedded in a dual-row flat leadless SMD package for reflow soldering with a 4 x 5mm bottom and a height of 1.6mm

The sensor outputs a calibrated digital signal in standard I2C format. The AHT10 is equipped with a newly designed ASIC-specific chip, an improved MEMS semiconductor capacitive humidity sensing element and a standard on-chip temperature sensing element

Widely use for HVAC, dehumidifier, testing equipment, consumer goods, automobiles control, data recorders, weather stations, household appliances, humidity regulation, and other related temperature and humidity detection and control

The first generation of temperature and humidity sensors have been improved to make them more stable in harsh environments

Interface type: I2C; Working voltage: 1.8 - 6.0V; Humidity accuracy: typical ± 2%;Temperature accuracy: Typical (+0.3°C)

Read more Read less

ALAMSCN Solar Connector Y Branch Parallel Adapter Solar Y Branch Connector MM/F+FF/M with Wrench for Solar Panels Connection (MC4+Y branch connector kit)

Buy on Amazon Find on eBay

[Package Contents] Comes with 5 pairs solar panel connectors Male & Female, 5 pairs solar connector pins (male & female), 1 pair of Y branch parallel connector, 2pcs spanners.

[Premium Material] Made of PPO insulation material, contact material is tin-plated copper. PPO material with excellent aging resistance and UV endurance, can resist severe weather such as heavy rain, snowstorm or heat for a long time.

[Wide Application] Compatible with PV cables (Solar Cable) with different insulation diameters (13AWG to 10 AWG), which is suitable for solar cables in various specifications on the market.

[Waterproof Design] IP67 waterproof level, waterproof ring on connection is perfect to seal out water and dust to prevent corrosion.

[Easy to install＆Strong Connection] Easily connect and disconnect solar wire connectors and solar cables without any additional equipment, plug and play, Strong connection and not easy to fall off.

Read more Read less

ALAMSCN 100PCS Double Sided PCB Board, PCB Board Prototype Kit 30PCS PCB Prototype Boards 30PCS 40 Pins Male and Female Header Connector for DIY Soldering

Furnace Circuit Boards

Buy on Amazon Find on eBay

[Double Sided PCB Board] 30pcs PCB prototype boards in 5 different sizes. 10pcs 2x8cm PCB board, 10pcs 3x7cm PCB board, 5pcs 4x6cm PCB board, 3pcs 5x7cm PCB board, 2pcs 7x9cm PCB board.

[PCB Board Kits] Double Sided PCB board is made of high quality durable fiber material and sprayed with tin on the surface. Pre-tinned plated holes on the PCB board, Make it more convenient for you to weld diodes, transistors, LED connectors, capacitors and other electronic components that need to be welded.

[Screw Terminal Block] 5pcs 5.08-301-2P and 5pcs 5.08-301-3P. Pitch: 5.08mm, rated voltage: 300V, rated current: 16A

[Jumper Caps] 30pcs standard 2.54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color.

[Header Connector] 10pcs 40 pin male header Connector, 10pcs 40 pin pitch right angle male headers Connector, 10pcs 40 pin female header Connector. Single row and straight connector.

Read more Read less

ALAMSCN Charging Port Dock Connector for Samsung Galaxy A70 A705 Charging Port Flex Cable Replacement with Repair Tool Kits

Buy on Amazon Find on eBay

[Compatibility] This replacement charging port flex cable is only compatible with the Samsung Galaxy A70 A705. Please check and confirm the phone model before purchasing this Item.

[Brand New Original Quality] Charging Port Replacement for Samsung Galaxy A70 A705, all of the replacement part was double tested by technicians before packing and shipping.

Read more Read less

ALAMSCN 6PCS GY-302 BH1750 Digital Light Intensity Sensor Module 3V-5V Compatible with AVR

Photoelectric Sensors

Buy on Amazon Find on eBay

Package content: 6pcs GY-302 light intensity sensor module.

Original BH1750FVI chip using ROHM, power supply: 3-5V, Data range 0-65535, sensor built 16bitAD converter.

Standard NXP IIC communication protocol; The module contains communication level conversion, and 5v microcontroller io direct connection.

Does not distinguish between ambient light, close to the visual sensitivity of the spectral characteristics; High-precision measurement of 1 lux can be performed for a wide range of brightness.

Direct digital output, omitting complex calculations, calibration is omitted.

ALAMSCN 5PCS 3D Printer Wrench 6mm 3D Printer Nozzles Wrench 7mm 3D Printer Spanner + 5 in 1 Spanner + Mini Cross Socket Wrench + Nozzle Copper Wire Toothbrush for 3D Printer

3D Printer Nozzles

Buy on Amazon Find on eBay

[Brass Wire Brush] Copper wire toothbrush is made of premium copper, sturdy and durable. Mini wire brush cleaner tool can get into the smallest spaces, design for 3D Printer Nozzle hot bed cleaning.

[Packaging] 3D printer wrench including 6mm nozzle spanner for MK8, 7mm nozzle spanner for E3D, 5 in 1 Spanner, Mini Cross Socket, Copper Wire Toothbrush, for 3D printer daily cleaning.

[Multi-Purpose Spanner] 5 in 1 spanner, different open modules fit different extruder nozzle and heater block; Mini Cross Socket is designed with four‑size ports, suit for M2 M2.5 M3 M4 Screw Nut Hexagonal.

[6mm 7mm L-Shaped Wrench] For fasten nozzles, 6mm hole is suitable for MK8 hexagonal nozzle; 7mm hole is suitable for standard E3D hexagonal nozzles.

[3D Printer Cleaning Tool] Small size, easy to carry and store, convenient to use and with good performance, suitable for DIY enthusiasts.

Read more Read less

ALAMSCN 5PCS PIR Human Sensor Module DC 2.7 to 12V Pyroelectric Infrared PIR Motion Sensor Detector Modules

Infrared Motion Detectors Motion Detectors

Buy on Amazon Find on eBay

IR human sensor module are small in size, and feature low power consumption and nicely anti-interference, with internal digital signal processing and direct high and low level output.

Human sensor module is a digital intelligent automatic control product that is based on passive body infrared technology, which is highly sensitive and reliable to use.

Working voltage: DC 2.7V - 12V; Static power consumption:

Repeatable trigger mode: after the induction output is high, in the delay period, if the body in its induction range of activities, the output will remain high until the delay after the person to become low level.

Read more Read less

ALAMSCN 5PCS OLED Display Module 0.91 Inch IIC I2C OLED Screen Driver DC 3.3V-5V, White

Barebone PCs

Buy on Amazon Find on eBay

Resolution is 128 x 32, Supporting voltage is from 3.3V-5V DC.The display performance is better than the traditional LCD display, also lower consumption; I2C oled display, IIC (I2C communications) simplifies connections.

0.91 inch OLED module is designed to display graphic information and text information directly on your microcontroller project;

OLED display module is self-luminous, so that no backlight is required; It features high contrast, bright and crisp dots, which is convenient for you to read tiny fonts.

Note: There are no fonts embedded in the OLED controller, so users can use the font generation software to create the fonts.

I2C oled display module is compatible with 4B/3B+/3B/2B/Zero, compatible with ESP8266, ESP32, etc.

Read more Read less

ALAMSCN 5PCS INMP441 Omnidirectional Microphone Module I2S Interface MEMS High Precision Low Power Compatible with ESP32

Buy on Amazon Find on eBay

The complete INMP441 solution consists of a MEMS sensor, signal conditioning, analog to digital converter, anti-aliasing filter, power management and industry standard 24-bit I2S interface.

The INMP441 is a high performance, low power, digital output, omnidirectional MEMS microphone with bottom port.

The I2S interface allows the INMP441 to be directly connected to digital processors such as DSPs and microcontrollers without the need for an audio codec for use in the system.

SCK: Serial data clock for I2S interface; WS: Serial data word selection for I2S interface; L/R: Left/Right channel selection.

Applications: Teleconferencing Systems, Remote Controls, Gaming Consoles, Mobile Devices, Laptops Tablets, Security Systems.

Read more Read less

ALAMSCN 6PCS TCRT5000 IR Infrared Reflective Obstacle Avoidance Module Photoelectric Switch Barrier Line Track Sensor for Smart Car Robot

Proximity Sensors Infrared Proximity Sensors

Buy on Amazon Find on eBay

TCRT5000 infrared reflection sensor is adopted, detection reflection distance: 1mm~25mm applicable. With a wide voltage LM393 comparatorith.

TCRT5000 is made of high-quality electronic accessories element material, which has superior performance against oxidation, electrical conductivity and life, it is long lasting and durable.

Wide application, for obstacle detection, Watt meter pulse data sampling, Detecting black and white line , Detecting Fax machine and shredder paper, for limits of movement on robotic arm.

VCC: connected to the positive pole of the power supply (3-5V); GND: connected to the negative pole of the power supply; DO: TTL switch signal output; AO: analog signal output.

Comparator output, signal clean, good waveform, strong driving capacity, more than 15mA. High reliability, strong vibration resistance, good electromechanical performance, long signal transmission distance.

Read more Read less

ALAMSCN 3D Printer Silicone Slap Mat Waterproof with Scraper Tweezers Clean Up or Resin Transfer 16x12 inch for Resin SLA DLP LCD 3D Printer Accessories, Gray

Buy on Amazon Find on eBay

This 3D printer silicon mat can be used for your Resin LCD 3D Printers, protecting your work surface from gluing, body putty, or painting even resisting melted solder and the tip of most soldering irons for up to 3 minutes.

Made of environmentally friendly silicone material, waterproof and non-slip, would not be harmed by printer resins, most chemicals or glues.

The tweezers help you cleaning the printed models more easily, the scraper allow you to remove your models from printer bed effortless without damaging either the model or the print bed.

Easy to clean, when resin become hard, it pops right off to be clean safely and easily with a simple flex. Also it can be clean up with towel and water when resin have not been dry enough.

Easy to carry, 3D printer silicon mat can be folded, can be rolled up storage, soft Silicone make it can be used outdoors.

Read more Read less

ALAMSCN 2 Set Digital 38KHz Infrared IR Receiver Sensor Module with Transmitter Module Kit Set

Proximity Sensors Infrared Proximity Sensors

Buy on Amazon Find on eBay

Adopt 1838 remote control receiver with high sensitivity.

The infrared transmitter sensor module is directly transmitted by a single tube, and the waveform needs to be modulated by the program.

Widely used in infrared communication, infrared remote control, apply to a variety of platforms including for 51, AVR, ARM.

IR infrared receiver sensor module kit can be used for remoter control, digital 38KHz IR transmitter sensor.

Basedon the 38KHz IR Transmitter Sensor, with the emission signal indicator LED, easy to observe and debug.

ALAMSCN VK-172 G-mouse USB GPS Dongle Glonass VK172 USB GPS Dongle Module for Raspberry Pi Compatible with Windows 10/8/7/Vista

USB Bluetooth Network Adapters Bluetooth Network Adapters

Buy on Amazon Find on eBay

The default output of VK-172 g-mouse is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data.

VK-172 usb gps glonass module can compatible with Windows Andorid sytem, Google Earth.

VK-172 built-in high-gain LNA, dual-channel LDO, large area radiation GPS optional baud rate 4800, 9600, 19200, 38400, 5700, 115200, etc.

VK-172 automatically adapt the baud rate, The baud rate has any data output.

The VK-172 gps is NOT plug and play for most device. You need to install driver before make it work.

ALAMSCN Charging Port Dock Connector for iPhone 8 Charging Port Flex Cable Replacement + Microphone + Headphone Audio Jack Replacement with Repair Tool Kits

Buy on Amazon Find on eBay

[Compatibility] Compatible with iPhone 8. Please check and confirm the phone model before purchasing this Item.

[Brand New Original Quality] Charging Port Replacement for iPhone 8, all of the replacement part was double tested by technicians before packing and shipping, perfect fit iPhone 8.

[Repair Tool Kit] 9 in 1 repair tool kit includes: 1 x 1.5 phillips screwdriver, 1 x 2.0 flat head screwdriver, 1 x 0.8 pentalobe screwdriver, 1 x 0.6 Y screwdriver; 2 x plastic Triangle Pick; 2 x plastic spudger; 1 x mini suction cup;

[Guarantee] Please rest assured to buy our Charging Port Flex Cable for iPhone, we provide good after-sales services. If you have any questions, please contact us in time. Our customer service team will help you solve the problem.

Read more Read less

ALAMSCN FAQs

How much do ALAMSCN products cost?

ALAMSCN 5 Set 433MHz RF Wireless Transmitter and R... is the top 1 product we recommend in the ALAMSCN buying guide, which is priced at £10.28, you can view it on Amazon page.
ALAMSCN 2PCS HD44780 1602 16x2 LCD Display Module... is one of the popular products we recommend in the ALAMSCN buying guide, which is priced at £8.58, you can view it on Amazon page.
ALAMSCN 5PCS PIR Human Sensor Module DC 2.7 to 12V... is the cheapest product in the ALAMSCN picks list, which is priced at £6.99, you can view it on Amazon page.
ALAMSCN 5PCS INMP441 Omnidirectional Microphone Mo... is the most expensive product in the ALAMSCN picks list, which is priced at £15.58, you can view it on Amazon page.

Where can you buy ALAMSCN products?

You can purchase ALAMSCN products from the seller Haijia EU, over the last 12 months, the seller has received honest feedback from 63 consumers, and the average rating is 4.88. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of ALAMSCN?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and ALAMSCN is worth your consideration.

Similar Brands