AOICRIE feature image

AOICRIE

Review rating Review rating Review rating Review rating Review rating 4.6

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the AOICRIE range from £6.99 to £14.99, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. AOICRIE provides their products for a reasonable price, which means the products cost around £10.68 on average. They are affordable options to make your shopping much easier.

AOICRIE offers 124 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The AOICRIE review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

AOICRIE Best Sellers

Last Updated: 14 Jun 2023

AOICRIE 2Pcs DHT22 AM2302 Digital Temperature Humidity Sensor Module Temperature Humidity Monitor Sensor with Cable Replace SHT11 SHT15

Single-bus digital signal output, bidirectional serial data.
Model: DHT22; Main Chip: AM2302 high sensitive temperature humidity sensor.
With fixing screw hole, convenient to install and fixed.
Temperature range: -40 to 80 degree celsius;Temperature measurement accuracy: +/- 0.5℃ degree celsius.Please make sure the temperature reading interval is greater than 2 seconds,otherwise the reading temperature will be inaccurate.
Humidity measuring range:0~100%RH;Humidity measurement accuracy:±2%RH.

AOICRIE 3 pcs CJMCU-219 INA219 I2C Interface Bidirectional DC Current/Power Monitoring Sensor Module for Arduino for Raspberry Pi(3PCS)

Used for I2C port zero drift / bidirectional current / power monitoring sensor module
The INA219 achieves a maximum error accuracy of 1% over the -40 ° C to + 85 ° C temperature range with a maximum offset of 100 uV.
Working Voltage 3~5V ; 1%, the maximum offset is 100 uV.
INA219 I2C Bi-directional DC Current Power Supply Sensor
Footprint: SOT23

AOICRIE 3Pcs HC-05 Wireless Bluetooth RF Transceiver Module TTL Serial Configuration Bluetooth Serial Transceiver Pass-Through Module Compatible for Arduino (3)

HC-05 BT Module: with this HC 05 module,You can quickly add the feature to your for project, and then you can use your android phone to control some gadgets, such as: switch, LED.
Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode.
The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other 2.0 devices.HC-05 BT Module
Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V, Default baud rate:9600,Default pin:1234
6 PIN Cable: with this Cable, you can easily connect this HC-05 module to your for Board

AOICRIE 5 PCS Nodemcu Wifi Development Board with ESP8266 Chip ESP-12F 4MB Byte Module for Arduino

Product parameter: this board contains 11 digital input and output pins, all pins have interrupt, PWN, I2C, 1-wire (except D0) and a micro USB connection; 1 input (under 3.2V), which compatible with for Arduino; 500mA resettable fuse
WIFI development board: on-board 5V 1A switching power supply, 4M bytes
Product features: this internet development board is nicely suitable for Arduino, and can be programmed for Arduino IDE and support OTA online
Mini size: it is a mini compatible with NodeMcu Lua WiFi board based on ESP-8266EX; Mini and compact design, can fit on a solderless breadboard; It is more compact and saves space for your project
Development Board NodeMcu Mini wireless D1 Module for ESP8266 ESP-12F 4M Bytes WLAN WiFi Internet Development Board Compatible for Arduino

AOICRIE Diagnostic Medical Penlight, Mini Reusable LED Penlight Flashlight Pen Torch, Torch Doctor Nurse Emergency Pen Light with Pupil Gauge and Ruler (Green)

[Easy To Use & Portable] : Our reusable LED nurse pen light is a single-click button that can be clicked and turned off. Light weight, stylish appearance, with metal clip, easy to carry and use for a long time.
[High-quality Materials] : Our Diagnostic Medical Penlight made of medical grade aluminum alloy, safe and environmentally friendly,which make this penlight Long-life. Ensure that there is no harm to sensitive skin and physical examination, easy to use and affordable.
[Widely Used] : These medical penlight with white light, can be used to check nose, mouth and ears. Not only for medical, our pen lights can be used as tactical flashlights for outdoor camping and home electrical maintenance, as home use for your kids or pets.
[Power] : These medical penlight is Powered by 2 AAA batteries (not included batteries), it is reusable by changing batteries.
[Penlight Design] : There are pupil gauge and a 5cm-ruler on the side of the penlight. It is very helpful for you to measure the pupil dilation and length on using these medical penlights.

AOICRIE 5Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino (5pcs)

[Item Condition] - Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.)
[Package Included] - 2pcs L298N Motor Driver Controller Board Modules.
[High Quality] - Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module.
[High Efficiency] - Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
[Easy of Use] - No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders.

AOICRIE 4 PCS W1209 Digital Temperature Controller, 12V DC Micro Digital Thermostat -50-110 Degrees Celsius Electronic Temp Control Module Switch with NTC Waterproof Sensor Probe (With Case)

[NTC Probe] : NTC (10K 0.5%) Waterproof sensor 0.5M. The NTC probe is waterproof and can control the temperature, allowing to control heating or cooling; Please note that the wood laminate case is the clear plastic case; You need to tear the wood outside layer off carefully, and the outside layer is very thin, which can protect the inside to prevent scratches; And you need to assemble and install the case by yourself.
[Controller Features] : The temperature controller board features complete machine patch, wave soldering, stable performance and nice consistency; Embedded CPU chip, namely MCU, is more intelligent, consume lower power.
[Tips] : Long press set to get menu, starts at P0, press + or - to get next P-parameter, press set to choose that parameter, press + or - to select the value you want for that parameter, press set to accept it, long press + or - = reset to default, power-out does reset to default, default temp set is 34.5 degrees Celsius.
[Reliable To Use] : Control accuracy of 0.1 degrees Celsius; Have been tested for stability, consistency and reliability. Temperature control range: -50 ~ 110 ° C; Resolution: -9.9 to 99.9 is 0.1° C , 1 ° C temperature ranges other.
[Performance] : Embedded CPU chip, MCU, more intelligent, lower power consumption; Automatic power set memory, MCU built-in EEPROM memory unit, 100% complete machine patch, wave soldering, stable performance, good consistency.

AOICRIE 12V DC Dosing Pump Peristaltic Dosing Head with Connector for Arduino Aquarium Lab Analytic DIY

[Snap Design] : With Snap-in type design, it is easy to remove the pump head, very convenient for pump tube replacement and cleaning. Compact design both tablet-style convenience, but also avoid the pressure hose pump head piece walking and many other issues.
[Product Specifications] : Motor RPM: 5000RPM, Volts:DC 12V, Flow rate:0-100 ml/min, Tube size: 2mm ID x 4mm OD, Relative humidity
[Wide Application] : Our pump is widely used, family watering, Farm irrigation, experiment liquid dispensing, chemical liquid transport, dosing additives.
[Product Size] : Driver size: Dia.27.6 x Height 37.9 (mm); Pump head size: Dia. 31.7 x Height 20.1(mm).
[Package Includes] : 1 x 12V DC DIY Dosing Pump Peristaltic Dosing Head ; 12 months Warranty.

AOICRIE 4pcs Digital LCD Thermometer, Fahrenheit Temperature Digital LCD Fridge Thermometer 2M Cable with Probe for Fridge Freezer Refrigerator Aquarium (Centigrade) (2M, Black)

Temperature range: -50~ +110°C,Usage temperature: -10°C ~ +50°C,Temperature measurement accuracy: ±1°C.
Digital LCD thermometer modeling simple, elegant, LCD display, moisture resistant, strong interference suppression, applies to refrigerators, counters and other needs of temperature measurement.
Mini size perfect for use in refrigerator,freezer,incubators, brooders, cigar humidors,reptile tank,3D printer, solar system,cellar and etc.It also can be used for test objects'temperature by the metal sensor.
Aquarium Thermometer,Fish Tank Thermometer,Terrarium Temperature Meters Gauge, LCD Display for Vehicle Reptile Terrarium Fish Tank Refrigerator.
2-meter-long external waterproof probe, which can measure the temperature of the liquid and reduce the distance limit-Centigrade.It come with a mounting clip which allows it to be mounted on any flat surface.

AOICRIE 10Pcs TP4056 Charging Module Battery Charging Board with Battery Protection 18650 BMS 5V Micro USB 1A 186 50 Charge Module (10pcs)

Details: the charging board inputs with micro USB female, can be directly inputed to do with phone charger rechargeable battery, still retains the input voltage wiring pads, convenient for you to DIY; Charging cut-off voltage: 4.2V, max charge current: 1000 mA
What you receive: there are 10 pieces TP4056 charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace
Suitable occasion: the battery charging board is applied for single-cell lithium battery or multi-cell parallel lithium battery charging, and the charging port can be powered from USB, which are convenient for you to operate
Notice: please note that the charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly; The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board
Function introduction: input voltage is 5V, battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A; Connect the battery to the B+ B-, inserted into the USB female mobile phone charger, the red light is being charged and the green light to full

AOICRIE 2 Pcs 4 Channel DC 5V Relay Module with Optocoupler for R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 for Raspberry Pi

Standard interface can be directly connected with for microcontrollers.
This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A.
Working status indicator lights are conducive to the safe use
Widely used for all MCU control, industrial sector, PLC control, smart home control.
4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as for Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.

DC-DC USB Input Converter Board Buck Boost Voltage Regulator Module DC 3.5~12V 5V to DC 1.2-24V 3.3V 9V 12V 24V Adjustable Output Digital Display Step Up Down Power Module (Pack of 2)

Adjustable Potentiometer: our adjustable voltage regulator adopts multi-turn precision adjustable potentiometer, the voltage can be adjusted accurately.
DC-DC converter board input voltage range is 3.5V~12V, support standard USB and micro USB 5V; adjustable output voltage range is 1.2v~24v, Max output power 3W.
USB Ports: With a USB male port and a micro USB port, it can be connected to the USB port or pads as you want.
ON/OFF Switch: The output and the digital display can be turned on/off freely by the switch. Short press the switch to turn off the output; hold press the switch to turn on/off the digital display.
Data Guaranteed: This buck boost converter is designed with power-off storage function, the status and data would be automatically stored when powered off.

AOICRIE 2 Pairs Battery Terminal Covers Car Positive & Negative Battery Terminal Protector Cover Red & Black for Automotive Marine Battery(4)

Material:The battery terminal covers are made by high quality insulating, which is soft, flexible and durable in use. It is not easy to break, has reliable quality and stable performance.
Package Content: 2Pairs battery terminal covers:3pcs red and 3pcs black terminal covers.
Widely used: The battery terminal covers are widely used in electronics, communication equipment, household electrical appliances, automobile, motorcycle, etc.
Insulating Covers Protector: The battery terminal protector cover offers effective protection for battery positive and negative terminal to avoid accidental contact or damage, and the sleeve prevents dust from entering from the cable end.
Easy Discrimination: The positive and negative battery terminal cover is designed with red and black covers, it corresponds to positive and negative poles for easy discrimination.

AOICRIE 100pcs 18650 Spacer Battery Cell Holder, Safety Spacer Radiating Shell Storage Bracket Fits for 1x 18650 Battery

Professional: : This is a battery holder for 18650 li-on batteries.
Professional Battery Holder: : Use professional battery holder to replace the traditional ordinary adhesive, which can be easily combined, the connection is stronger, and the battery can be easily maintained.
Protect the battery: : Suitable for the DIY combination of imported batteries, unique design and smart sturdy frame can provide an excellent protector for your lithium-ion battery pack.
High Quality: : With excellent impact resistance, heat resistance, low temperature resistance, chemical resistance and electrical properties.
18650 li ion Battery Holder+ 18650 Battery Holder Organizer, 100PCS 18650 Li-ion Battery Stand Cylindrical Battery Pack Bracket 18.4mm / 0.7in Hole Diameter

AOICRIE 3PCS XL4015 E1 5A DC to DC CC CV Lithium Battery Step Down Charging Board XL4015 E1 Adjustable Buck Power Converter Switching Power Supply Charger Modul (3 Pack)

XL4015 E1 power converter is high power, high efficiency, 5A high current output, low ripple with power indicator.
DC to DC CC CV step down board is a 300KHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple and excellent line and load regulation.
This DC-DC converter can be used to debug multiple system operating voltage ranges, maintain stable output voltage and limit the output current over a range of input voltages.
Input range: DC 8 V - 36 V, output range: DC 1.25 V - 32 V, over temperature protection; short circuit protection; Current limit protection; even if the output is short-circuited, the module will not be damaged.
Great for general voltage conversion, battery charging, powering raw LEDs, automotive electronics, battery conversions, micro-controllers, and electronic projects.

AOICRIE GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino (3PCS)

Communication mode : standard IIC communication protocol
MPU-6050 MPU6050 6-axis Accelerometer Gyroscope Sensor
Gyroscopes range: +/- 250 500 1000 2000 degree/sec
Chip built-in 16bit AD converter, 16bit data output

AOICRIE RC Servo Tester 3CH Digital Multi ECS Consistency Speed Controller Checker Adjustment Steering Gear Tester CCPM Master for RC Helicopter Car Boat (5pcs)

3 modes to check servos or ESC - Manual mode: turn the knob to view the servo response speed;Neutral mode: making the servo go back to the neutral point;Automatic "wiper" mode: making the servo swing at the biggest angle.
RC Motor Servo Tester, used to test analog and digital servos and control the ESC. Can convenient to detect and set the virtual, jitter and neutral of the servo.
Package Included: 5 * RC Servo Tester.
Connect electronic speed controller (DC/EC), can get rid of the remote control equipment for manual speed regulation. Used for testing the performance of regulator and motor, no more tedious connection of remote controller and receiver.
Can connect groups servos or electronic speed controller, good single chip microcomputer control, good stability, high precision. Rotate the knob to detect servo.

AOICRIE RFID Kit - MFRC522 RC522 RF IC Card Reader Sensor Module, RFID Chip Key Ring and S50 Card 13.56MHz I2C IIC SPI for Arduino and for Raspberry Pi (5pcs)

SCOPE OF AOICRIE- RFID-RC522 module, S50 card, S50 key fob, pin strips. FAST ENTRY - through already available libraries and SPI interface.
Get now five RFID Kits at a special price with quantity discount!
We always strive to improve the function of our products
SUPPORTED FORMATS - S50, S70 Ultralight, Pro
APPLICATIONS - e.g. for the development of access controls, electronic door locks or terminals for time recording.

Aoicrie 3 PCS DC XL6009 Boost Converter Module, XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board

Input: DC 3 V to 30 V, optimum operating voltage range: 5V to 30V;
XL6009 DC-DC Adjustable step-up power converter module, Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board.
This module XL6009E1 is coming with the 3rd generation high-frequency switch technology as the core chip.
This is only for the increasing output voltage; The input voltage should not be over 30 V to avoid any possible damage.
Output: DC 5 V to 35 V voltage is continuously adjustable, maximum output current is 4 A.

AOICRIE FAQs

You can purchase AOICRIE products from the seller Aoicrie EU, over the last 12 months, the seller has received honest feedback from 54 consumers, and the average rating is 4.64. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and AOICRIE is worth your consideration.