Comgrow

4.9

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Comgrow range from £9.99 to £249, and the average price of all the products is about £49.62. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Comgrow offers 62 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The Comgrow review will examine the core factors of the brand and its products to help you make an informative buying decision.

Comgrow Best Sellers

Last Updated: 14 Jun 2023

PEI Sheet 235x235 mm, Ender 3 Bed Magnetic Flexible Heated Bed with Adhesive for Creality Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

Buy on Amazon Find on eBay

[Wide range of applications] Applicable models: Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers, or other hot bed size 235 x 235 mm/9.2 x 9.2 in model. Compatible with PLA/PETG/PEEK/ABS and any other filaments.

[Excellent adhesion and easy to remove] Upgrades magnetic build surface provides better adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.

[Quality safety] The flexible PEI 3D printer platform spring steel platform in the middle, covered with PEI sheet surface on it, and the magnetic base on the underside are up to 200°C. PEI sheet Ender 3 soft magnetic stickers can withstand long working with the heated bed at a high temperature of 70 °C.

[Easy to install] The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate.

[Customer Services] If you have any question or need technical support about the product, please press "Ask a question" through our storefront's page, report an issue through the "Your Orders" page. We will respond with 24 hours.

Read more Read less

Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3 S1/Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 3D Printer 2352351mm

Buy on Amazon Find on eBay

EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.

ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.

UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.

SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.

CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.

Read more Read less

Creality Original CR-10 V2 Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover 320 x 310mm for CR-10S Pro V2 / CR-10S Pro/CR-10S / CR-X

Buy on Amazon Find on eBay

DURABILITY: The bed surface is capable to work at 70℃.

EASY REMOVAL OF PRINTS: Upgrade part, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.

SIZE: 320x310mm magnetic bed. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds.

SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.

CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.

Read more Read less

Creality 3D Printer Enclosure Fireproof and Dustproof Printer Tent for Ender 3 / Ender 3 Pro/Ender 3 V2/Ender 5 Pro, Constant Temperature Protective Cover Room Storage 445x565x685mm

Buy on Amazon Find on eBay

Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.

Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability. Fit for Ender 3, Ender 3 Pro, Ender 3 X, Ender 3 V2, Ender 3X, Ender3 Pro X,Ender 5, Ender 5 Pro.

Stable Structure: Equipped with a selection of iron pipes, stable structure and abundant space.

Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room.

Dustproof and good noise reduction. Reduces noise from the printer, offers extra breathing room for the machine, and is also dustproof.

Read more Read less

Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing, Upgraded Metal Extruder Feeder,Pneumatic Couplers and Bed-Level Spring for Ender 3/ Ender 3 Pro/Ender 3 V2/ CR-10 Series

Buy on Amazon Find on eBay

1*Upgraded Creality All Metal MK-8 Extruder Feeder Drive 1.75mm Filament for Ender 3/3 Pro/3 X, Ender 5/5 Plus/5 Pro, CR-10 Series, CR-10S, CR-10 Plus, CR 20/20 Pro, CR-X.It makes loading the filament easier and smoother, no worries about filament scraping or breaking.

1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.

1 pair- small and large pneumatic couplers to secure PTFE in extruder and hotend.

4* bed-level springs for stiff and accurate bed leveling. NOTE: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You may use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs.

Professional Customer Support - If you have any problem or question for our product,please feel free to contact us. We will repond within 24 hours and offer professional technical support to you.

Read more Read less

Creality CR Touch kit Auto Bed Leveling Sensor Kit (Upgraded BLTouch) for Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5 Pro/CR10 with 32 Bit V4.2.2/V4.2.7 Mainboard

Buy on Amazon Find on eBay

[Durable Metal Probe, More Than 100,000 Times Reused] Creality CR Touch is upgraded to a metal probe, which reduces wear and tear and greatly prolongs its service life - it can be reused more than 100,000 times. It is near silent and there is no annoyed loud click or red light. This is a drop in replacement for a standard BLTouch if your motherboard is 32 Bit.

[Technical Innovation--Upgraded Photoelectric Sensor] Compared with the traditional auto bed leveling sensor, such as bl touch and 3d touch, crtouch adopts high-precision electromagnetic components, which delivers a more precise and more stable height detection. Positioning accuracy ≤0.04mm, multi-point automatic detection, smart compensation and improve your 3d printing quality like magic!

[Multi-Model Application & Platform Materials] This Creality CRTouch auto leveling kit can be used on Ender 3/Ender 3 Pro/ Ender 3 V2/Ender 5/Ender 5 Pro/CR-10. (Note: only applicable to 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers.) Compatible with PEI sheet, magnetic stickers, glass bed, metal bed and more 3d printer platform materials.

[Easy to Install and Easy to Use] Download the CR Touch firmware from the Creality official website and copy it to the sd card. Insert it directly into the card slot of your 3D printer. The pragram will be updated after power on. Equipped with 3 different brackets, you can find a good fit for your printers. It comes with a detailed paper user manual and following the instructions, you will be successful.

[Constant Communication & All-Round After-Sale] If you encounter any problem during installation and use, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours.

Read more Read less

Upgraded Creality Ender 3 All Metal MK-8 Extruder Feeder Drive1.75mm Filament for Ender 3 Pro, Ender 5/5 Plus/Pro, CR-10 Series, CR-10S, CR 20/20 Pro 3D Printer, Gray Aluminum Block Bowden Extruder

3D Printer Extruders

Buy on Amazon Find on eBay

Last Over Years: Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.

Compatibility: This gray MK8 style metal extruder is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 X, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.

Work Better: It makes loading the filament easier and smoother, no worries about filament scraping or breaking.

Fits 1.75mm filament: 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG.

Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.

Read more Read less

Ender PLA Filament 1.75mm 3D Printer Filament PLA for 3D Printer 1kg Spool (2.2lbs), Dimensional Accuracy of +/- 0.02mm PLA Yellow

Buy on Amazon Find on eBay

[Tangle Free & No Plugging] Consistent diameter & roundness, less stringing and warping, strong layer adhesion.

[High Precision] These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.

[Wide Compatibility] Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.

[Vacuum Package] 1.75mm 3d printer filament PLA in vacuum packing; 1kg spool.

[Environment friendly] Made from starch raw materials derived from renewable plant resources.

Creality Upgrade Ender 3 V4.2.7 Silent Motherboard 32 Bit with TMC2225 Driver BootLoader for Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro 3D Printer

3D Printer Extruders 3D Printer Controllers

Buy on Amazon Find on eBay

This silent motherboard adopts TMC2225 drivers, which can reduce the stepper motor noise greatly.

Creality upgraded V1.1.5 silent motherboard to V4.2.7 silent motherboard. V1.1.5 silent mother is 8 bit but V4.2.7 silent mainboard is 32 bit. Customer Services: If you have any trouble when using this board, just feel free to contact us through Amazon. We will provide solutions for you.

Optimized Circuit: enabling thermal runaway protection to effectively solve heating problems. Could be used in combination with E/Z/Y/X drive axle.

NOTE: It has the free unified firmware preconfigured for Ender-3. If you wanna install this board to Ender-3 Pro/Ender-5, you will need to flash the firmware. If you do not have the firmware please contact us!

Marlin V0.0.6 and Bootloader installed,the firmware can be modified with an USB cable. It does not need an ISP cable and ISP pinboard anymore.

Read more Read less

COMGROW 3D Printer UV Lamp for Resin Curing with Solar Turntable 360° Rotating Stand for Resin 3D Printer Models Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosure

Buy on Amazon Find on eBay

The 360°rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can't use batteries for power.Maximum display/rotate weighing less than 500g/1.1Pound. Close to light will help to speed up and rotate heavier.

The UV resin curing light uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual.

Uses: UV curing, resin curing (SLA DLP print curing). The lamp can be used in DIY curing packages or handheld applications.

The resin can cure in 10-15 seconds from a distance of 5 cm from the light, but thicker parts require more time.

Due to the strong ultraviolet light output, please use eye protection when using this light.

Read more Read less

Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3/3 Pro 3D Printer

Buy on Amazon Find on eBay

Materials: Plastic

Fit for: Creality Ender 3, Ender 3X, Ender 3 Pro

Weight: 0.078KG

Package included: DC 24V Extruder Hot End Fan and DC 24V Turbo fan

Operation Voltage: DC 24V

Comgrow 4PCS Creality Aluminum Hand Twist Leveling Nut with 4PCS Hot Bed Springs for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR10S/10S Pro, CR 20 3D Printer

Buy on Amazon Find on eBay

Last Over Years. Made by high quality aluminum, last much longer your stock plastic nuts.

Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2/3X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.

The torque of these nuts is large, making it easier to fine tune the hot bed.

Package includes 4Pcs Red Aluminum Screw Nut + 4Pcs Yellow Die Spring. NOTE: The springs are around 25mm long, which is longer than ender 3,ender 3 pro and ender 3 v2 printer springs. You can use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs.

Metal nut is more powerful and will twist more tightly than plastic nuts.

Read more Read less

Creality Upgrade Ender 3 Pro V4.2.7 Silent Motherboard with TMC2225 Driver BootLoader Compatible with Ender 3 / Ender3 V2 / Ender 5 / Ender 5 Pro 3D Printer

3D Printer Controllers

Buy on Amazon Find on eBay

This silent motherboard adopts TMC2225 drivers, which can reduce the stepper motor noise greatly.

Creality upgraded V1.1.5 silent motherboard to V4.2.7 silent motherboard. V1.1.5 silent mother is 8 bit but V4.2.7 silent mainboard is 32 bit. NOTE: If you have any issue, please kindly contact us. We will reply as soon as possible within 24 hours. We will offer you professional customer support and strive our best to offer your solutions.

Optimized Circuit: enabling thermal runaway protection to effectively solve heating problems. Could be used in combination with E/Z/Y/X drive axle.

NOTE: It has the free unified firmware preconfigured for Ender-3 Pro. If you wanna install this board to Ender-3/Ender-5, you will need to flash the firmware. If you do not have the firmware please contact us!

Marlin 2.0.1 (V1.0.1) and Bootloader installed,the firmware can be modified with an USB cable. It does not need an ISP cable and ISP pinboard anymore.

Read more Read less

Comgrow Creality 3D Printer NTC Thermistor Temp Sensor 100K for Ender 3 / Ender 3 Pro/Ender 5 / CR-10 / CR-10S

Buy on Amazon Find on eBay

It has 2 pin female connector

Use for heated bed or extruder

Wire length: 1m/39.4 inches

Temperature sensor 100KΩ accuracy of ± 1%

Package include: 5 thermistors

Official Creality Ender 3 Neo 3D Printer with CR Touch Auto Bed Leveling Kit Full-Metal Extruder Carborundum Glass Printing Platform with Resume Printing Function Silent Mainboard 220x220x250mm

3D Printers

Buy on Amazon Find on eBay

Silent Mainboard: Low-decibel operation ensured by a silent mainboard, will not bothering study or work. Which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation, create a quiet environment.

CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hot bed. It saves much more time for customers in long-time leveling adjustment, quickly finish the leveling process.

Smooth Feeding: Full-metal extruder with greater force enables smooth feeding, reducing the risk of nozzle blockage. Quick Heat Dissipation: Corrugated heat sink enlarges the radiating area, enabling fast cooling down.

Resume Printing Function: Ender 3 Neo can resume printing from the last recorded extruder position after suffering unexpected power outages. What You Get: Ceality Ender 3 Neo 3D printer, lifetime technical assistance and 24 hours professional customer service.

Durable Glass Build Surface: Carborundum glass build surface effectively reduces the warping issue with even heating. The coating brings good adhesion for filament, and the finished models can be easily removed by bending the print sheet.

Read more Read less

Creality Ender 3 Direct Drive Extruder Kit, Compatible for Creality Ender 3 Pro, Ender 3 V2, Full Assembled Hotend Kit Supports 1.75MM PLA, ABS TPU Filament

Buy on Amazon Find on eBay

[Easy to Install and Use] Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.

[Compatibility with] Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.

[Printing at High Temperature, Strong Compatibility] Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.

[Integrated All Metal Hotend] It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.

[Direct Extruding Smooth Feed-in] Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.

Read more Read less

Official Creality Direct Drive Extruder Kit for Ender 3/3 Pro/3 V2, Comes with 42-40 Stepper Motor, Hot End Kit, 1.75mm Direct Drive Extruder, Fan and Install Tool kit

Buy on Amazon Find on eBay

1. Multi-Compatible: Can be installed on Ender 3/3 Pro/3 V2/CR10 V2 3D Printer.

2. Smoothly Feed-in: Highly decrease the delivery distance, offers more precise and smoother extrusion.

3. High-Durable Level: Highly utilize metal elements for the whole stable operation.

4. Easily Assemble: Come with wiring diagram instructions, in addition, a longer extruder motor connecting cable can highly decrease the inconvenience when installing.

5. Customers Support: Any questions or need technical support about the product, please report an issue through your order details page, we will deal with this within 24 hours.

Creality 3D Printer Enclosure, Fireproof, Dustproof, and Temperature Protective Enclosure for Creality Ender 3 S1/3 S1 Pro/3 S1 Plus/Ender 5/5 pro/5 plus/CR 10S PRO V2/CR-X, Size 750x700x900MM

Buy on Amazon Find on eBay

Waterproof and Dustproof: This printing box is waterproof and dustproof, it helps organize space, reduce some of the fan and motor noises. It is waterproof, help your printer keep dry. It also can help to keep your printer from getting dust for no use for a long time, because it is dustproof.

Great Print Environment: This 3D printer tent can keep a constant temperature printing environment, reduct the impace of printed products when low temperature weather, improve printing stability. Improve the overall printing experience of the Creality 3D printers. No more worry about the print quality coming from the open-framed Ender 5 Plus or CR-10S Pro V2 will be nagatively affected by the external environment.

Stable Structure: Equipped with a selection of Iron pipes, stable structure, and abundant space.

Safe to Use: The interior of the 3D printer tent adopts pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure, and will not spread.

Easy and Convenient: This 3D printer tent is really easy to install, it can be folded for efficient storage, which also makes it easy to carry. And it equiped with pockets to hold the necessary tools. Further more, you can easily access the printer by unziping the front of the enclosure, which features a seethrough screen for full-time monitoring.

Read more Read less

Creality Sonic Pad 3D Printed Smart Pad Based on Klipper Firmware for FDM 3D Printers Higher Your Printing Speed & Quality for Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro 3D Printer

Buy on Amazon Find on eBay

[Get It Going with No Hitch] Creality Sonic Pad can connect to almost any FDM 3D printer on the market via a USB cable. With the included configuration manual, it is easy to set things up. Besides, it has been pre-configured for Ender-3 V2. Ender-3 s1, and Ender-3 S1 Pro, so you can get it going in seconds.

[Highly Integrated with Strong Computing Power] Beneath the large 7-inch touch control screen, the Klipper firmware runs in full swing on a powerful 64-bit computing platform. With software-hardware integration, you will get stunning performance, but with less trouble.

[Speed Up Printing While Kepp the Quality] Creality Sonic Pad uses precision-oriented algorithms to command the motors for higher printing speed. The built-in input shaper fanction will mitigate oscillation during high-speed printing and smooth out ringing, thus keeping the model quality.

[Intuitive Model Preview] Creality Sonic Pad supports G-code model preview when slicing with the Creality Print, Ultimaker Cura, Pursa Slicer, and Super Slicer.

[Deft with User-defined Macros] Creality Sonic Pad supports user-defined programmable macros, with each macro combining a series of commands to a specific function for higher efficiency.

Read more Read less

Creality Official “Sprite” Extruder Pro-Kit, Suitable for Ender 3/3 Pro/ 3 V2/ 3 Max/ 3 S1, Satisfy Near-end Printing and High-temperature Printing

3D Printers

Buy on Amazon Find on eBay

1. Dual fan design: Improve heat dissipation and make the model formation more stable.

2. All-metal nozzle: can print 300°C high temperature filament, TPU/ABS/PETG.

3. Double gear feed: Double gear interlocking structure, no damage to filaments, more re and stable supply.

4. LARGE TORQUE DESIGN: The extrusion force is up to 80 N and the control of the retraction amount is more accurate.

5. Flexible spring preload adjustment: suitable for different filament sizes, stable feeding.

Comgrow FAQs

How much do Comgrow products cost?

PEI Sheet 235x235 mm, Ender 3 Bed Magnetic Flexibl... is the top 1 product we recommend in the Comgrow buying guide, which is priced at £15.99, you can view it on Amazon page.
Creality Original Ultra Flexible Removable Magneti... is one of the popular products we recommend in the Comgrow buying guide, which is priced at £18.39, you can view it on Amazon page.
Upgraded Creality Ender 3 All Metal MK-8 Extruder... is the cheapest product in the Comgrow picks list, which is priced at £9.99, you can view it on Amazon page.
Official Creality Ender 3 Neo 3D Printer with CR T... is the most expensive product in the Comgrow picks list, which is priced at £249, you can view it on Amazon page.

Where can you buy Comgrow products?

You can purchase Comgrow products from the seller Comgrow Direct, over the last 12 months, the seller has received honest feedback from 112 consumers, and the average rating is 4.93. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of Comgrow?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Comgrow is worth your consideration.

Who are the manufacturers of the Comgrow products?

Most of the Comgrow products are produced by Creality 3D. The manufacturer provides Comgrow with a steady supply of products, and they have a good cooperative relationship with each other.

Similar Brands

Comgrow

Comgrow Best Sellers

PEI Sheet 235x235 mm, Ender 3 Bed Magnetic Flexible Heated Bed with Adhesive for Creality Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3 S1/Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 3D Printer 235*235*1mm

Creality Original CR-10 V2 Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover 320 x 310mm for CR-10S Pro V2 / CR-10S Pro/CR-10S / CR-X

Creality 3D Printer Enclosure Fireproof and Dustproof Printer Tent for Ender 3 / Ender 3 Pro/Ender 3 V2/Ender 5 Pro, Constant Temperature Protective Cover Room Storage 445x565x685mm

Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing, Upgraded Metal Extruder Feeder,Pneumatic Couplers and Bed-Level Spring for Ender 3/ Ender 3 Pro/Ender 3 V2/ CR-10 Series

Creality CR Touch kit Auto Bed Leveling Sensor Kit (Upgraded BLTouch) for Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5 Pro/CR10 with 32 Bit V4.2.2/V4.2.7 Mainboard

Upgraded Creality Ender 3 All Metal MK-8 Extruder Feeder Drive1.75mm Filament for Ender 3 Pro, Ender 5/5 Plus/Pro, CR-10 Series, CR-10S, CR 20/20 Pro 3D Printer, Gray Aluminum Block Bowden Extruder

Ender PLA Filament 1.75mm 3D Printer Filament PLA for 3D Printer 1kg Spool (2.2lbs), Dimensional Accuracy of +/- 0.02mm PLA Yellow

Creality Upgrade Ender 3 V4.2.7 Silent Motherboard 32 Bit with TMC2225 Driver BootLoader for Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro 3D Printer

COMGROW 3D Printer UV Lamp for Resin Curing with Solar Turntable 360° Rotating Stand for Resin 3D Printer Models Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosure

Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3/3 Pro 3D Printer

Comgrow 4PCS Creality Aluminum Hand Twist Leveling Nut with 4PCS Hot Bed Springs for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR10S/10S Pro, CR 20 3D Printer

Creality Upgrade Ender 3 Pro V4.2.7 Silent Motherboard with TMC2225 Driver BootLoader Compatible with Ender 3 / Ender3 V2 / Ender 5 / Ender 5 Pro 3D Printer

Comgrow Creality 3D Printer NTC Thermistor Temp Sensor 100K for Ender 3 / Ender 3 Pro/Ender 5 / CR-10 / CR-10S

Official Creality Ender 3 Neo 3D Printer with CR Touch Auto Bed Leveling Kit Full-Metal Extruder Carborundum Glass Printing Platform with Resume Printing Function Silent Mainboard 220x220x250mm

Creality Ender 3 Direct Drive Extruder Kit, Compatible for Creality Ender 3 Pro, Ender 3 V2, Full Assembled Hotend Kit Supports 1.75MM PLA, ABS TPU Filament

Official Creality Direct Drive Extruder Kit for Ender 3/3 Pro/3 V2, Comes with 42-40 Stepper Motor, Hot End Kit, 1.75mm Direct Drive Extruder, Fan and Install Tool kit

Creality 3D Printer Enclosure, Fireproof, Dustproof, and Temperature Protective Enclosure for Creality Ender 3 S1/3 S1 Pro/3 S1 Plus/Ender 5/5 pro/5 plus/CR 10S PRO V2/CR-X, Size 750x700x900MM

Creality Sonic Pad 3D Printed Smart Pad Based on Klipper Firmware for FDM 3D Printers Higher Your Printing Speed & Quality for Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro 3D Printer

Creality Official “Sprite” Extruder Pro-Kit, Suitable for Ender 3/3 Pro/ 3 V2/ 3 Max/ 3 S1, Satisfy Near-end Printing and High-temperature Printing

Comgrow FAQs

Similar Brands

Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3 S1/Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 3D Printer 2352351mm