Skip to content
BZ 3D feature image

BZ 3D

4.7
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the BZ 3D range from £6.98 to £24.98, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. BZ 3D provides their products for a reasonable price, which means the products cost around £15.23 on average. They are affordable options to make your shopping much easier.

BZ 3D offers 62 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The BZ 3D review aims to sharpen your understanding of the brand and introduces you to their bestselling products. Just keep reading!

Share

BZ 3D Best Sellers

Last Updated: 15 Jun 2023

3D Printer Extruders

BZ 3D Dual Gear Extruder,Ender 3 Extruder Upgrade,CR10S PRO Dual Pneumatic Joint Dual Driver Metal Extruder For Ender 3/V2/Pro/Ender 5/CR-10/CR-10S/CR6-SE1.75mm Filament

BZ 3D Dual Gear Extruder,Ender 3 Extruder Upgrade,CR10S PRO Dual Pneumatic Joint Dual Driver Metal Extruder For Ender 3/V2/Pro/Ender 5/CR-10/CR-10S/CR6-SE1.75mm Filament Cover
  • Perfect replacement for 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/Ender 3 pro/Ender 5/Tornado, etc.Note:ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
  • Dual-gear and dual-pneumatic joint extrusion structure, high extrusion force, enhancing the feed strength , ensuring smooth feeding, better pressure pushes the filament into the printer, not easy to lose steps.
  • Upgrade 2: This idler gear uses black half-threaded screws (to prevent premature wear of the bearings inside the gear) to increase the life of the extruder.
Buy on Amazon Find on eBay
Mechanical Pulleys Mechanical Timing Belt Pulleys

BZ 3D GT2 Idler Pulley 20 Teeth Bore 5mm for 3D Printer 6mm Width Timing Belt.(Pack of 10pcs)(20 Teeth bore 5mm)

BZ 3D GT2 Idler Pulley 20 Teeth Bore 5mm for 3D Printer 6mm Width Timing Belt.(Pack of 10pcs)(20 Teeth bore 5mm) Cover
  • Teeth Type: 20 Teeth , Bore 5mm. Suitable for 6mm Width Timing Belt.
  • Material: Aluminum, Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively.
  • Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.
Buy on Amazon Find on eBay
3D Printer Extruders

BZ 3D Dual Drive Extruder, Dual Gear Bowden Extruder,High Performance Upgrading Parts for CR10,Ender 3 Series,Wanhao D9,Anet E10,Other DIY 3D Printers(Type 2)

BZ 3D Dual Drive Extruder, Dual Gear Bowden Extruder,High Performance Upgrading Parts for CR10,Ender 3 Series,Wanhao D9,Anet E10,Other DIY 3D Printers(Type 2) Cover
  • Better Experience on Flexible Filaments:It feeds all materials with high reliability,from PLA/ABS/PETG to TPU/TPE/Nylon filaments.Compared with other bowden extruders ,it provide better experience on flexible filaments.
  • Dual Drive Extruder utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears to give you a compact powerhouse for all your applications.
  • Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions in a lightweight and compact package.
Buy on Amazon Find on eBay
3D Printer Timing Belts

BZ 3D 10M GT2 Timing Belt 6mm Width Glass Fiber Non-Slip,for Prusa i3,Ender 3,Ender 5,CR-10, Anet A8, i3 Mega,CNC,Other 3D Printers. (10M Non-Slip)

BZ 3D 10M GT2 Timing Belt 6mm Width Glass Fiber Non-Slip,for Prusa i3,Ender 3,Ender 5,CR-10, Anet A8, i3 Mega,CNC,Other 3D Printers. (10M Non-Slip) Cover
  • The timing belt made of glass fiber reinforced rubber with neoprene belt protector is chemically resistant, durable and NOT stretchable under normal tensile force. It has been specially developed for 3D printing and can also be used as an accessory in any model building project.
  • Upgrade Anti-slip version: The tooth surface of the belt is made of nylon treated tooth cloth. Pulley contact with the belt, which minimizes the risk of belt slipping.
  • The strap back is made of neoprene, which effectively protects the strap from dirt, grease and moisture. This makes it a durable spare part and practical accessory for your printer.
Buy on Amazon Find on eBay

BZ 3D Ender 3 Heatbed Leveling Upgrade Kit,4Pcs Hand Twist Leveling Nut +4Pcs Hot Bed Die Springs +5Pcs Silicone Column Solid Bed Mounts for Ender 3 V2/3/3 Pro/Ender 5.(Type 2)

BZ 3D Ender 3 Heatbed Leveling Upgrade Kit,4Pcs Hand Twist Leveling Nut +4Pcs Hot Bed Die Springs +5Pcs Silicone Column Solid Bed Mounts for Ender 3 V2/3/3 Pro/Ender 5.(Type 2) Cover
  • Silicone leveling column made from premium silicone, it is stable, durable and heat-resistant. Can help cutting back vibrations .These silicone buffers serve to replace on your heating bed original springs and it is no longer possible movement, your set levels remain.
  • Aluminum Hand Twist Level Nut-Made by high quality aluminum,last much longer than plastic nuts.The torque of these nuts is large, making it easier to fine tune the hot bed.Metal nut is more powerful and will twist more tightly than plastic nuts.
  • Silicone leveling column Model is 4 high and 1 short (don't include Print firmware).Compatible：Ender 3, Ender 3 V2 , Ender 3 PRO,It is also suitable for Ender 5 / Plus / Pro/ 3D Printers, etc.
Buy on Amazon Find on eBay
3D Printer Extruders

BZ 3D Upgraded Titan Extruder Compatible with V5 and V6 Hotend J-head 1.75mm Filament for CR10,Ender 3 Series DIY 3D Printer

BZ 3D Upgraded Titan Extruder Compatible with V5 and V6 Hotend J-head 1.75mm Filament for CR10,Ender 3 Series DIY 3D Printer Cover
  • Compact and lightweight.Support for long-haul and short-haul freight.
  • The feeding torque is large. Support remote and short-distance feeding.
  • Use with high strength, aging resistant injection molded products from engineering materials.
Buy on Amazon Find on eBay

BZ 3D Nema 17 Stepper Motor Damper Rubber Vibration Dampers + Heat Sink + M3 Screw for 3D Printer CR-10, CR10S /4/5,Ender 3,Ender 5/Pro (Set of 4)

BZ 3D Nema 17 Stepper Motor Damper Rubber Vibration Dampers + Heat Sink + M3 Screw for 3D Printer CR-10, CR10S /4/5,Ender 3,Ender 5/Pro (Set of 4) Cover
  • Our Imported Genuine Stepper Dampers, Easy install,Better quality and appearance than the brass or green version of the damper on this site.
  • Dampers eliminated the noise resonating in your CNC and 3d Printer from motors vibrating and amplifying with the metal construction . and effectively improving 3D printing quality.
  • Works on CR10,CR10 S/4/5,Ender 3 /Pro, Ender 5/ Pro,Wanhao i3,Prusa Other Style 3D Printer ect for the best results in your 3D printer and remove vibration and noise.
Buy on Amazon Find on eBay
Mechanical Pulleys Mechanical Timing Belt Pulleys

BZ 3D GT2 Timing Pulley 40 Teeth 8mm Bore Synchronous Wheel Aluminum for Width 6mm 3D Printer Parts(Pack of 4pcs)(40 teeth bore 8mm)

BZ 3D GT2 Timing Pulley 40 Teeth 8mm Bore Synchronous Wheel Aluminum for Width 6mm 3D Printer Parts(Pack of 4pcs)(40 teeth bore 8mm) Cover
  • Contact with the tooth side which minimizes the risk of the belt slipping.
  • Suits to the timing belt which is 6mm width.
  • Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.
Buy on Amazon Find on eBay

BZ 3D MKS TMC2208 V2.0 Stepper Motor Driver Ultra-Quiet/Low Heat For MKS SGen L V1.0/Gen L V2.0 /Robin E3D/SKR 1.3/1.4 Controller Board (5pcs)

BZ 3D MKS TMC2208 V2.0 Stepper Motor Driver Ultra-Quiet/Low Heat For MKS SGen L V1.0/Gen L V2.0 /Robin E3D/SKR 1.3/1.4 Controller Board (5pcs) Cover
  • Step resolutions: 256 microsteps / step resolution. Flexible MicroPlyer interpolation unit, also limited in pulse rate system can still be perfect to achieve sinusoidal control.
  • TMC2208 single-axis stepper motor drive chip, Default current:1.25a ,Max current:2.0a ,Input voltage:4.75v-36v
  • Support UART Mode You Can use UART Mode in MKS SGEN L V1.0 / MKS GEN L V2.0 / MKS Robin E3D, SKR 1.3 / 1.4 by setting jumper cap. (No jumper is needed, no welding drive is required, and it is more convenient to use) This function does not support MKS GEN L V1.0
Buy on Amazon Find on eBay

BZ 3D Teflon Bowden Tube PTFE Transparent Tubing (3m) + PC4-M6 Quick Fittings (5pcs) + PC4-M10 Straight Pneumatic Fitting (5pcs) For Connecting PTFE tubing for 1.75mm Filament Press

BZ 3D Teflon Bowden Tube PTFE Transparent Tubing (3m) + PC4-M6 Quick Fittings (5pcs) + PC4-M10 Straight Pneumatic Fitting (5pcs) For Connecting PTFE tubing for 1.75mm Filament Press Cover
  • PC4-M6 fittings: thread M6/3.5mm, inner diameter(blue end) 5mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable.
  • Teflon Tube: outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃.
  • PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 5mm, fit for the tube whose outer diameter is 4mm, the fitting made of stainless steel and plastic, high hardness, antioxidtion, anti corrosion.
Buy on Amazon Find on eBay

BZ 3D 3M Black PTFE Tube,3D Printer Teflon Tubing ID1.9mm OD4mm for 1.75mm Filament for Ender 3 /V2/Pro/CR-10/ MK3/ MK3S/ Mega Series Hotend Bowden Extruder.(PTFE Black)

BZ 3D 3M Black PTFE Tube,3D Printer Teflon Tubing ID1.9mm OD4mm for 1.75mm Filament for Ender 3 /V2/Pro/CR-10/ MK3/ MK3S/ Mega Series Hotend Bowden Extruder.(PTFE Black) Cover
  • We strive to choose better materials, slower production speeds, more accurate in-tube diameters. The operating temperature up to (260℃+）.
  • Material: PTFE .High Quality Teflon Tube 1.75mm filament ID 1.9mm OD 4mm.Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • The smooth inner space will more effectively reduce the frictional resistance of the filament inside the tube.
Buy on Amazon Find on eBay
Car Crankshaft Gears

BZ 3D MK2/MK3 Dual Gears Stainless Steel Pulleys Kit 3D Printer Gears Extrusion

BZ 3D MK2/MK3 Dual Gears Stainless Steel Pulleys Kit 3D Printer Gears Extrusion Cover
  • Dual drive gears for 1.75 mm filament, precision custom CNC machined with extreme precision guarantees that you get the grip you always wanted.
  • This gear kit is designed for Prusa i3 3d printer DIY. The gears come as a set consisting of a primary drive gear with an M3 setscrew that fits on a 5mm shaft with a flat side as those on standard Nema17 motors.
  • Manufactured in hardened steel with a protective surface treatment will give you a long lifetime and extreme reliability.
Buy on Amazon Find on eBay
3D Printer Extruders

BZ 3D Ender 3 Upgrade Kit, Dual Gear Extruder,4PCS Hand Twist Leveling Nut, 8PCS Hot Bed Die Springs,1.2M PTFE Bowden Tubing for Ender 3 V2/3/3 Pro/Ender 5 /CR-10/10S/CR10S Pro

BZ 3D Ender 3 Upgrade Kit, Dual Gear Extruder,4PCS Hand Twist Leveling Nut, 8PCS Hot Bed Die Springs,1.2M PTFE Bowden Tubing for Ender 3 V2/3/3 Pro/Ender 5 /CR-10/10S/CR10S Pro Cover
  • Aluminum Hand Twist Level Nut-Made by high quality aluminum,last much longer than plastic nuts.The torque of these nuts is large, making it easier to fine tune the hot bed.Metal nut is more powerful and will twist more tightly than plastic nuts.
  • All Metal Dual Gear Extruder - Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two gear locked together. high extrusion force, ensuring smooth feeding.Manually change the e steps/mm in the Marlin firmware to 139 steps/mm.
  • Teflon Tube（High Quality）-ID 1.9mm OD 4mm，Material: PTFE，The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend,Low friction,more accurate prints, less slippage.For 1.75mm filament.
Buy on Amazon Find on eBay

BZ 3D Ender 3 Upgrade Aluminum Z-Axis Leadscrew Top Mount for CR-10 CR-10S, Ender 3 V2,Ender 3 Pro,Metal Z-Rod Bearing Holder (Pack of 2)

BZ 3D Ender 3 Upgrade Aluminum Z-Axis Leadscrew Top Mount for CR-10 CR-10S, Ender 3 V2,Ender 3 Pro,Metal Z-Rod Bearing Holder (Pack of 2) Cover
  • If your Ender 3 Pro's Z Rod is straight. then it fit for too. But Please Note: some Ender 3 Pro's stock Z Rod are a little bent, if so, the kit will not give your printer better experience.
  • It's a Z-Axis Leadscrew Top Mount for 3D Printer.
  • Color: Black .Material: Aluminum alloy.
Buy on Amazon Find on eBay

BZ 3D Ender 3 Upgrade 2020 Profile X-axis Synchronous Belt Stretch Straighten Tensioner for CR-10 10S Ender 3. (2020 X-axis)

BZ 3D Ender 3 Upgrade 2020 Profile X-axis Synchronous Belt Stretch Straighten Tensioner for CR-10 10S Ender 3. (2020 X-axis) Cover
  • Features:High quality aluminum alloy material, Surface anodizing treatment. Fine workmanship, wear-resistance and corrosion-resistance.
  • Very useful upgrade parts for series printer, you can adjust the belt freedom, more better than original.
  • Please select the appropriate tensioner according to your machine structure.
Buy on Amazon Find on eBay

BZ 3D Upgrade 2040 Aluminum Profile Y-axis V-Slot Synchronous Belt Stretch CR-10 Straighten Tensioner Compatible with CR-10 CR10S 3D Printer Parts (2040 Y axis)

BZ 3D Upgrade 2040 Aluminum Profile Y-axis V-Slot Synchronous Belt Stretch CR-10 Straighten Tensioner Compatible with CR-10 CR10S 3D Printer Parts (2040 Y axis) Cover
  • Features:High quality aluminum alloy material, Surface anodizing treatment. Fine workmanship, wear-resistance and corrosion-resistance.
  • 2040 aluminum profile Y-axis synchronous belt stretching fit for CR-10, CR-10S
  • Please noted that the belt of CR-10 S4, CR-10 S5 3D Printer ect is 10mm, this y-axis is not fit for them.Match GT2 Timing Belt 6mm Width. This pulley is 20 Teeth 5mm Bore
Buy on Amazon Find on eBay

BZ 3D MKS 3D Touch V2.0 Auto Leveling Sensor Auto Bed Leveling Sensor For 3D Printers CR-10/Ender 3/ Pro/CR-10S/S4/S5 Improve Printing Precision

BZ 3D MKS 3D Touch V2.0 Auto Leveling Sensor Auto Bed Leveling Sensor For 3D Printers CR-10/Ender 3/ Pro/CR-10S/S4/S5 Improve Printing Precision Cover
  • Printer TOUCH is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface.It can greatly improve the printing precision of your 3D Printer.
  • 3D Touch Auto Leveling Sensor For 3D Printers Ender 3/ Ender 3 V2/Pro/ Ender 5/Ender 5 Pro/CR-10 /CR-10S/S4/S5 And Other Various FDM 3D printers.
  • The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on.
Buy on Amazon Find on eBay

BZ 3D Upgrade 2020 Profile X-axis Straighten Tensioner + Z-axis Leadscrew Top Mount, Heatbed Springs Works with Ender 3/Ender 3 V2/Ender 3 Pro/CR-10, CR10S etc

BZ 3D Upgrade 2020 Profile X-axis Straighten Tensioner + Z-axis Leadscrew Top Mount, Heatbed Springs Works with Ender 3/Ender 3 V2/Ender 3 Pro/CR-10, CR10S etc Cover
  • Z-Axis Leadscrew Top Mount for 3D Printer.Material: Aluminum alloy.
  • 2020 aluminum profile X-axis belt stretch.Very useful upgrade parts for series printer, you can adjust the belt freedom, more better than original.For 6mm Belt.Material: aluminum alloy. Surface Treatment: anodizing.
  • Upgrade parts works with Ender 3 / V2,Ender 3 Pro/ CR10, CR10S. etc. Note:Please select the appropriate tensioner according to your machine structure.
Buy on Amazon Find on eBay

BZ 3D FAQs