Skip to content
BIGTREETECH feature image

BIGTREETECH

4.8
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the BIGTREETECH range from £10.98 to £104.27, and the average price of all the products is about £52.39. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

BIGTREETECH offers 93 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The BIGTREETECH review will examine the core factors of the brand and its products to help you make an informative buying decision.

Share

BIGTREETECH Best Sellers

Last Updated: 14 Jun 2023

3D Printer Controllers

BIGTREETECH SKR Pico V1.0 for the Voron VO 3D Printer Customised Control Board Motherboard Designed with Improved Heatsink

BIGTREETECH SKR Pico V1.0 for the Voron VO 3D Printer Customised Control Board Motherboard Designed with Improved Heatsink Cover
  • Technical features: with Raspberry Pi ARM Cortex-MO+ MCU RP2040, chip capacitors (MLCC): Murata capacitor. The TYPE-C interface is connected to the main control communication. Easy installation and removal of the fuse (holder + fuse).
  • INDUSTRIAL DESIGN - The BTT SKR Pico V1.0 adopts an industrial design for heat sinks, it makes the overall appearance of the motherboard full sense of technology, while the larger heat dissipation area makes calculating more efficient.
  • Technical support: please send us a message via Amazon message if you encounter a problem. We have a professional technical team that supports you.
Buy on Amazon Find on eBay
3D Printer Platforms

BIGTREETECH Resin 3D Printer Platform 140x84mm Flexible Steel Build Plate with Magnetic Sticker

BIGTREETECH Resin 3D Printer Platform 140x84mm Flexible Steel Build Plate with Magnetic Sticker Cover
  • [Stronger adsorption] Special wire drawing treatment on the surface of the spring steel plate makes the model better absorb. Spring Steel, easy to Use and flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • [Fits Resin Printer] For Mars 2 Pro, LD-002H.
  • [Flat, Sturdy and Durable] The build plate is made of spring steel imported from the United States, which has good flatness and durability; the soft magnetic sheet is a strong magnetic soft magnetic sheet with strong magnetic force.
Buy on Amazon Find on eBay
3D Printer Controllers

BIGTREETECH Octopus V1.1 for CR10 Ender 3 3D printer Control Board Upgrade Spider motherboard Marlin 2.0 Klipper Support TMC2209 TMC2208 TMC2130, TFT35 E3 V3.0, TFT35 V3.0, 12864LCD ect

BIGTREETECH Octopus V1.1 for CR10 Ender 3 3D printer Control Board Upgrade Spider motherboard Marlin 2.0 Klipper Support TMC2209 TMC2208 TMC2130, TFT35 E3 V3.0, TFT35 V3.0, 12864LCD ect Cover
  • Octopud V1.1: A board designed for advanced user, it supports 8 stepper drivers, besides the basic x, y, z, e; 4 extra stepper drivers could be used to add 4 extra extruders to make it a multi-extruder printer, print up to 5 colour in a single job! The connectors themselves would also suffice for two 3D printers.
  • Note: Due to the price increase of 446ZE chip, only Amazon has 446ZE chip motherboard, other platforms are 407ZE chip, the chip firmware configuration of the new version of 407ZE is different. STM32F407ZE can supports Marlin Klipper, but 512KB flash not enough & there is no customized version for RepRapFirmware.
  • Not plug and play: You probably need to compile your own marlin or klipper for it. Firmware download: https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/tree/master/Firmware, Any problem please contact us via Amazon message, we have 24h tech-support on line.
Buy on Amazon Find on eBay

BIQU SSS Super Spring Steel Sheet Build Plate 235x235MM 3D Printer Parts Printing Platform PLA PETG for Ender 3

BIQU SSS Super Spring Steel Sheet Build Plate 235x235MM 3D Printer Parts Printing Platform PLA PETG for Ender 3 Cover
  • [Easy to Use and Flexible] Has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • [Strong Adhesion] After the hot bed is heated, the model is stable on the hot bed,and not easy to loose and fall off.
  • [High temperature resistance] Withstand temperature above 200 ℃.
Buy on Amazon Find on eBay
3D Printer Controllers

BIGTREETECH SKR Mini E3 V3.0 Control Board, with TFT35 E3 V3.0.1 Graphic Smart Display Panel Board New Upgrade 3D Printer Parts

BIGTREETECH SKR Mini E3 V3.0 Control Board, with TFT35 E3 V3.0.1 Graphic Smart Display Panel Board New Upgrade 3D Printer Parts Cover
  • [Three CNC Fan] Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;
  • [Main Control Chip] Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;
  • [TFT35-E3 V3.0 Screen] This touch screen panel board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
Buy on Amazon Find on eBay
3D Printer Controllers

BIGTREETECH PI TFT50 V2.0 LCD Capacitive Touch Screen,Supports DSI Display Interface Direct Drive and 5 Points Touch

BIGTREETECH PI TFT50 V2.0 LCD Capacitive Touch Screen,Supports DSI Display Interface Direct Drive and 5 Points Touch Cover
  • 1. 800*480 resolution, display area up to 108x64.8mm
  • 2. The display adopts Raspberry Pi power supply design without external power supply
  • 3. The display also supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen
Buy on Amazon Find on eBay
3D Printer Interface & Driver Modules

KINGPRINT TMC2209 V1.2 Stepper Motor Driver 2.8A Peak Driver 3D Printer Parts for SKR V1.4 Turbo SKR PRO V1.2 SKR 2

KINGPRINT TMC2209 V1.2 Stepper Motor Driver 2.8A Peak Driver 3D Printer Parts for SKR V1.4 Turbo SKR PRO V1.2 SKR 2 Cover
  • 1) The motor is not easy to lose step, ultra quiet mode
  • 2) A large area of heat conducting pad, reduce the temperature of driving work
  • 3) Avoid engine shaking;
Buy on Amazon Find on eBay
3D Printer Controllers

BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130

BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130 Cover
  • 1) Z sensor doesn't seem to work? Please modify the Z-axis limit logic, it is likely to be a firmware problem; please try to replace a limit switch. If the limit switch can work on other ports but not on the Z-axis port, we will provide warranty service ; Please make sure the firmware name is firmware.bin.
  • 2) Getting "no printer attached" ? Please try to update the firmware. Please make sure that "serial port 0" is turned on in the marlin firmware and the baud rate is set to 115200. The board cannot update the firmware? Please try another SD card; it shows that the printer is not connected? Please check the firmware, wiring and baud rate, if you do not understand this operation, please consult us.
  • 3) Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development. Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation;
Buy on Amazon Find on eBay
3D Printer Extruders

BIQU H2 V2 Direct Drive Extruder, 3D Printer Upgrade for CR10 Series, Double Gear Extruder for Ender 5 Mega S, Geeetech Printers

BIQU H2 V2 Direct Drive Extruder, 3D Printer Upgrade for CR10 Series, Double Gear Extruder for Ender 5 Mega S, Geeetech Printers Cover
  • [H2 Extruder advantages] Retain the advantages of the Direct extruder, the control of the feeding amount is more accurate than the remote extrusion, and the withdrawal is more accurate; the torque requirement of the extrusion stepping motor is relatively low; the material change is convenient.
  • [H2 Extruder All-metal throat pipe] The smoothness of the inner wall of the throat pipe and the nozzle reaches the level of Ra0.4, which can effectively prevent blockage.
  • [Multi-gear transmission] The H2 extruder achieves a torque transmission ratio of 7:1 through multi-gear transmission, and an ultra-high torque of 770mN.m. Streamlined heat dissipation structure, super effective heat dissipation.
Buy on Amazon Find on eBay
3D Printer Interface & Driver Modules

KINGPRINT TMC5160 v1.3 Stepper Motor StepStick Mute Silent Driver Support SPI with Heatsink for 3D Printer Control Board (4 Pieces)

KINGPRINT TMC5160 v1.3 Stepper Motor StepStick Mute Silent Driver Support SPI with Heatsink for 3D Printer Control Board (4 Pieces) Cover
  • ultra-quiet mode;small heat
  • External power MOS transistor to support larger currents and maximum current 20A (Because the module is limited by area, the current cannot be exceeded);
  • not easy to lose step;
Buy on Amazon Find on eBay
3D Printer Controllers

BIGTREETECH Mini12864 V1.0 LCD graphic intelligent display control panel screen display RGB backlight suitable VORON 2.4 for MKS Gen/SKR mini e3 v2.0 Ender3 3D printer

BIGTREETECH Mini12864 V1.0 LCD graphic intelligent display control panel screen display RGB backlight suitable VORON 2.4 for MKS Gen/SKR mini e3 v2.0 Ender3 3D printer Cover
  • 1) RGB multi-color backlight, more cool, through the interface, backlight selection.
  • 2) Mini12864 is suitable for copiers, fax machines, laser printers, industrial test equipment, network equipment, etc.
  • 3) Mini12864 LCD is easy to install and easy to operate. Background printing can be achieved through the LCD control panel, copy the 3D model Gcode file to the SD card, and then select the file through the LCD control panel to print.
Buy on Amazon Find on eBay
Mini Barebone PCs Barebone PCs

BIGTREETECH Pi4B Adapter V1.0 Carrier Control Board Support CM4 or CB1, with SKR Mini E3 V3.0 Octopus V1.1 Octopus Pro Control Board to Run Klipper VS Raspberry-Pi 4/3B for Voron 3D Printer

BIGTREETECH Pi4B Adapter V1.0 Carrier Control Board Support CM4 or CB1, with SKR Mini E3 V3.0 Octopus V1.1 Octopus Pro Control Board to Run Klipper VS Raspberry-Pi 4/3B for Voron 3D Printer Cover
  • Designed with Gigabit Ethernet interface, HDMI0 interface, HDMI1 interface, CAM interface, CSI interface.
  • Use Raspberry Pi 4B board outline, the same mounting hole dia; Support various versions of CM4 modules.
  • Equipped with ESD protection at the USB and network interfaces; 40 pin double-row pin header with the same function as Raspberry Pi.
Buy on Amazon Find on eBay
3D Printer Controllers

BIGTREETECH SKR 3 EZ Control Board 32bit New Upgrade Silent Board Support EZ2209/ EZ5160/ EZ2130 Stepper Driver Compatible TFT Series Touch Screen, DIY for Most FDM 3D Printer (with 5PCS EZ2209)

BIGTREETECH SKR 3 EZ Control Board 32bit New Upgrade Silent Board Support EZ2209/ EZ5160/ EZ2130 Stepper Driver Compatible TFT Series Touch Screen, DIY for Most FDM 3D Printer (with 5PCS EZ2209) Cover
  • SKR 3 EZ 3D Control Board adopts two kinds of driver sockets, which are compatible with both BIGTREETECH EZ series driver modules and TMC series driver modules. Each motor drive module can select the corresponding motor voltage through the jumper cap.
  • Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users.
  • SKR 3 EZ's numerical control fan realizes 24V, 12V, 5V voltage selection through the external power supply module, eliminating the need for the operation of the customer's external transformer module, thereby reducing the probability of damage to the motherboard.
Buy on Amazon Find on eBay
3D Printer Platforms

BIGTREETECH for CR10 Magnetic Flexible Steel Plate Platform 3D Printer 310 x 310 mm none Textured Strong Adhesion for Anet A8 Plus, Mega-x, ect

BIGTREETECH for CR10 Magnetic Flexible Steel Plate Platform 3D Printer 310 x 310 mm none Textured Strong Adhesion for Anet A8 Plus, Mega-x, ect Cover
  • [High Hardness, Durable] PEI Priting Surface+Spring Steel Plate+Magnetic Base, Magnetic spring steel film triple reinforcement, high temperature resistance, high temperature resistance and durable.
  • [Applicable Model] CR10, Anet ET5 series, Anet A8 Plus, Artillery Sidewinder X1 SW-X1, mega-x, or other machines with a hot bed size of 310 x 310mm.
  • [The Bottom of the Model is Smooth] The printed model can be taken without the help of other tools.
Buy on Amazon Find on eBay

BIGTREETECH FAQs