Toaiot

4.9

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Toaiot range from £11.99 to £65.99, and the average price of all the products is about £30.84. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Toaiot offers 67 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The Toaiot review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

Toaiot Best Sellers

Last Updated: 15 Jun 2023

Toaiot 235x235mm Removable Flexible Build Plate JanusBPS Double Sided Powder Coated+Smooth Coated PEI Sheet for Ender 3 V2 S1/Ender 5/Pro/Neptune 2/CR20/Mega Pro/Aquila C2/LK4/Shark V2/Odin-5 F3

Buy on Amazon Find on eBay

Compare with glass plate, the Textured side of this bed material work well for PETG PLA filament which say good bye to glue stick. Material sticks on contact, and comes off with a mild bend. It grips the hotbed well and is easy to clean.

Newest Upgrade 3D printing bed, Textured/Smooth Double Sided PEIJanusBPS Build Platform Surface: A 3d printing must have tool! removable, flexible, Double Sided (Powder Coated + Smooth Coated), great adhesion.prints have had no issues with adhering, warping, or releasing. Haven't even needed to flex the bed yet, everything just slides off when so long as the bed is cooled down.

This item comes in two pieces: one side steel which A PEI laminated flexible steel sheet, another steel side which cover by PEI Powder Coated; and a self-adhesive magnetic sheet. If you already have a magnetic bed, do not apply magnetic sheet or you will increase the chance of trapping air which expands when heated and could cause bed deformation.

Smooth Coated PEI: good work for most filament, include PLA PETG ABS WOOD and etc, pei surface leaves a smooth finish for printing model. Tips: After heating up the sheet, thousands of tiny (microscopic) bubbles form, they don't make the surface rough, in fact they don't alter the performance in any way.

How to keep the plate well: wash them with sish soap and warm water between prints and dry them with a micro fiber tower. or use steel Wool to clean..

Read more Read less

Toaiot 3D Printer Parts Hotbed E-Leveler 3D Printer Electronic Bed Leveling Tool Compatible with Ender 3/ Pro/ V2, Ender 5 Plus/5 Pro/CR10/ 10S 3D Printer Bed Leveler Accessories

Buy on Amazon Find on eBay

Simple Structure: Small circuit board design with a resistor, a switch and a led that lights when the switch is pressed. It gives you visual effect to perfectly adjust the bed level on your 3D printer.

Upgraded 3d Printer Bed Leveling Tool: A New design to help level your printer's hotbed precisely and quickly, much better than paper or feeler gauge. Make sure the distance between nozzle and bed are the same at all four corners.

Wide compatibility: it can be used on 3D printer Ender 3/ Pro/ V2/ S1, Ender 5/ PRO/ Plus, CR10/ CR10S etc.

How to Use: Please set around 7 at the Z offset first（Actual measurements are required depending on the height of the platform）, and put the crosshair mark of the e-leveler directly under the nozzle at each corner, and adjust the bed knob until the LED turns on. And repeat this process at other corners.

Advantages: Much easier and more convenient to use. Using paper is so easy to fail and waste your time. But the leveler, you can use less time to level the bed accurately.

Read more Read less

Toaiot MK3 Spring Steel Sheet JanusBPS Double Side Gold Powder Coated + Smooth PEI Magnetic Flexible Heated Bed Platform, MK52 Printing Buildplate with Hole for MK52 Prus i3 MK2.5 MK3 MK3S

3D Printer Platforms

Buy on Amazon Find on eBay

This double sides coated sheet is very easy to use, simply place it onto your heated bed, both sides can use directly.

A must have 3D Printer part for DIY or replace a new Prus i3 MK3 printer hot bed. The steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI. Only fit for new magnetic MK52 heatbed, not include magnetic base.

The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.

Size: 254X241mm/ 10X9.4inch, suitable for the same size build plate.

Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.

Read more Read less

Toaiot Ender 5 Plus 3D Printing Platform FYSETC JanusBPS Powder Coated+Smooth Coated PEI Sheet Printing Surface with Strong Magnetic Base 3D Printing Build Surface 377x370mm/14.8x14.5inch

3D Printer Platforms

Buy on Amazon Find on eBay

Size: 377 x 370 mm, for Ender 5 Plus or other 3D printers with the same print bed size. (Please measure your build plate, do not rely on build volume before ordering). If you can accept the 0.5-1mm tolerance compared to your printing area, just buy it.

Latest upgrade 3D print bed, JanusBPS build platform surface: A 3D print must have tools! removable, flexible, double-sided (powder coated + smooth coated), excellent adhesion. Prints had no sticking, warping, or peeling issues. Didn't even have to bend the bed, everything just slides off as long as the bed cools down.

To keep the plate well: Wash with soap and warm water between prints and dry with a microfiber tower. or use steel wool to clean.

Smooth Coated PEI: Good job for most filaments including PLA PETG ABS WOOD etc. The Pei surface leaves a smooth finish for the print model. Tips: After the plate is heated, thousands of tiny (microscopic) bubbles form, which do not roughen the surface, but do not change the performance in any way.

Compared to glass sheet, the textured side of this bed material is good for PETG PLA filament, say goodbye to glue stick. The material sticks on contact and releases with a slight flex. It grips the hotbed well and is easy to clean.

Read more Read less

Toaiot Ender 5 Plus Printing Platform 3 in 1 Flexbile Spring Steel Plate 377x370mm/14.84x14.56inch with PEI Build Plate Heated Bed Cover + Magnetic Base Compatible with Ender 5 Plus 3D Printer

3D Printer Platforms

Buy on Amazon Find on eBay

Durability: The steel plate is made of high quality stainless steel, which has good flatness and durability. Due to its large size, it's normal to have a little shake just holding it. This will fade away when putting on the magentic base. Flexible and removable, can be slightly bent to pop off the prints.

Applicable 3d printer model: Size: 377mmx370mm/14.84x14.56inch, Compatible with Ender 5 Plus, or other 3D printers with the same size printing bed. (Please measure your build plate,not rely on bulid volume before ordering). If can accept the torelance 0.5-1mm comparied with your printing area, just buy it.

Strong Adhesion: Customized material PEI makes your print easy to adhere and has a wide compatibility of filaments, including ABS PETG Wood TPU PLA etc, No need to paste any glue. Comes with Strong Magnetic Base with adhesive, so you can heat your bed to high temps for specialty filaments and not worry about the loss of performance. You also can cut it to fit for your any bed size.

Kind Tips: We have sticked the PEI on one side of the steel plate by machine, so you don't need to worry about the bubbles any more. If you receive the package but found the air bubbles or scratches, please don't worry, they are the under the film, PEI will not be affected. Clean the pei surface with alcohol or lightly scour it with wild steel wool with 400 grit to have good adhension.

Easy to use: Peel off the back paper at magentic base and stick it to the heated bed, then align the steel plate on the base. The side with PEI is upside to print on. After installing, please keep your heated bed level. The pei is a little thin, please mind the distance between nozzle and surface to avoid scratching it. Please take off the protective film on the PEI surface before printing. When completed printing, please let the steel plate cool down, easy to remove the prints.

Read more Read less

Toaiot Spring Steel Build Plate Round Dia 380 X 380mm /14.9 x 14.9 inch Steel Sheet Heat Bed for Anycubi Predator 3D Printer with PEI + Magnetic Sticker B Surface Printing Hotbed Parts

Buy on Amazon Find on eBay

Size: 380 x 380 mm / 14.9 x 14.9 inch, for Anycubi predator.

Level the hotbed surface of the 3D printer to make your print easily adhere to the print surface, flexible, removable，Note: we helped you stick PEI on the steel plate, you don't have to to worry about bubbles

Simply stick a PEI on top of the FlexPlate, attach it to your print bed via the magnetic mounting base, perform a one-time z-height adjustment, and start printing. When the print is complete, simply remove the FlexPlate, fold and remove your prints!

Our magnets and films have all been formulated to withstand over 130°C / 226F so you can heat your bed to high temperatures for the special filaments and not worry about loss of performance.Compatible with PLA ABS PETG TPU and most other filaments

If you would like to purchase another size please send us a message and we will let you know how we can help.

Read more Read less

Toaiot 3D Printer Accessories GT-2 Open Rubber Timing Belt Width 6mm X Axis 805mm/31.69 inch Y Axis 740mm/29.13 inch Non-Slip Version Strap with Pressed Copper Buckles for Ender 3 V2

3D Printer Timing Belts

Buy on Amazon Find on eBay

Material: Natural Rubber, strong, flexible, very good extending quality, durable.

A upgrade necessary replacement belt for Ender 3 V2.

Size: GT belt Pitch 2mm width 6mm X axis Length: 805mm /31.69 inch, Y axis Length:740mm / 29.13 inch.

Convenient: Copper buckles have been pressed on both ends of the belt and can be directly installed.

After Sales Guarantee: each one defective item can have the free replacement or refund, need more help please feel free to email or QA us, we will try our best to service you.

Toaiot Flexible Removable PEI Steel Sheet Plate Size 120x120mm/4.7x4.7in with Magnetic Base Build Surface Compatible with Voro V0 3D Printer Parts

3D Printer Platforms

Buy on Amazon Find on eBay

Flexible, removable, can stick to magnetics very well. High strength and heat resistance, not worry about loss of performance.

Size: 120mm x 120mm,the overall thickness 2MM/0.08 inch, compatible with Voro V0 or the same size heatbed.

PEI is pre-sticked on one side for printing on, no need to worry about bubbles. Please peel off the protective film on the PEI surface before printing.

Most filaments, such as ABS and PLA can print directly on to PEI surface without the need for additional adhesives, tapes, slurry or glue stick; Just wipe down with isopropyl alcohol between prints for best results.

Easy to install and adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off, reusable, durable.

Read more Read less

Toaiot Flsn Super Racer Build Plate Round 270mm/ 10.6 inch Diameter Janusbps Spring Steel Sheet-Textured/Smooth Double Sided Removable PEI Sheet+Magnetic Base for Flsn Super Racer 3D Printer

Buy on Amazon Find on eBay

Flexible, removable, can stick to magnetics very well. The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! High strength and heat resistance.

A upgrade Replacement printing platform-Round JanusBPS 270mm/10.6inch, compatible with Flsn Super Racer model. This steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI pre sticked, comes with a magnetic base.!!!Please re-measure your build plate before ordering, not rely on its printing size area.

Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it. Just wipe down with isopropyl alcohol between prints for best results.

Double sides can be used and easy to install: simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform on the top. Both sides can be used to print, just flip it over, more convenient. The pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using.

Read more Read less

Toaiot Anycubi Hotend Mounting Block Kit, Strain Gauge Sensor Spare Parts for Automatic Leveling on Anycubi Vyperr KobraMax 3D Printer Parts Replacment

Buy on Amazon Find on eBay

Easy to replace: The main function of this strain gauge sensor replacement part is to fix the hot end and level automatically, and it must work with the main board of the original model.

Usage: When the hot-end mounting block and induction strain gauge of an Anycubi Vyperr model age, fail or do not work properly, is a perfect replacement accessory for 3D printers.

Points to note: Do not turn over the wire in the welding area, otherwise it will easily lead to the failure of the induction function.

High quality: High quality raw materials, good workmanship. Environmentally friendly, safe and non-hazardous.

3D Parts: can directly replace the stock/ Original creative 3D printing printer parts / accessories, Suitable for Anycubi Vyperr.

Read more Read less

Toaiot 3D Printer DIY Accessories 196.8 inch 6mm Flat Seal 2020 Aluminum Profile Slot Cover/Panel Holder Fillter Extrusion Cover Compatible with Ender 3 V2 Pro CR10 V2/ CR6 SE CNC Parts-Blue

Buy on Amazon Find on eBay

It does not fit all types of extrusions used in 3D printers! only Fits well in aluminum extrusions with 6mm open channels, not fit for which extrusions is 4mm open channels ,good fit 'standard' 2020 V-slot extrusion.

2020 extrusion cover: It is a necessary spare parts for your printer: This filler is perfect for keeping dirt and filament out of the rails,and it looks cool!

fits 2020 extrusion and prevents dust building up in the grooves. easy to cut to length and can hide small diameter or flat wiring behind it.

Total 5 meter/196.8 inch length, simple to cut and fit: Very easy to press into place, and seem pretty durable, no more cleaning pla out of cracks.

The item's is made of PVC mixture which main material is PVC, component of PVC is polyvinyl chloride; high quality material for long lasting use, soft, not easy.

Read more Read less

Toaiot Flexible Removable Double-Sided Coated PEI Platform 120x120mm/4.7x4.7in Gold Steel Spring Sheet Powder Bed Magnetic Base Heated Build Surface Compatible with Vorn V0 3D Printer Parts

Buy on Amazon Find on eBay

Size: 120x120mm/4.7x4.7in,For Vorn V0, or other 3d printers with the same size heated bed.(Please measure your printer heat bed before ordering.)

New upgraded PEI coated steel plate, comes with a Magnetic Platform Side B

Flexible, removable, can stick to magnetics very well. High strength and heat resistance

Easy to install: stick the magnetic base to your build plate, then align the steel plate on it, then keep it level. Easy to remove the prints, flex slightly to pop your print right offrepeatedly,resistance, durable. Material compatibility range is wide, such as PLA, PETG, TPU,PUA, etc.

After-sales Guarantee: each one defective item can have the free replace or refund, If need further please fell free to email or Q&A us, we and our engineers are very happy to assist you.

Read more Read less

Toaiot Glass Bed+Powder Coated Double Sided Removable Upgrade 3D Printer Platform 235x235mm for Ender 3 V2 S1 Pro/Ender 5/ Pro Neptune 2/CR20/Mega Pro/Aquila C2/LK4/Shark V2/Odin-5 F3 BLU-3

3D Printer Platforms

Buy on Amazon Find on eBay

good work for most filament, include PLA PETG ABS WOOD and etc, Note: The powder surface is suitable for printing with consumables below 80°. If high temperature printing is required, please use the glass surface.

The newly upgraded double-sided platform, one side of glass + one side of semi-tempered glass surface is coated with black PEI powder, for Ender 3/Ender 3 Pro/Ender 3 V2 /S1/Ender 5/Ender 5 Pro/Ender 3 S1/Neptune 2/CR20/CR20 Pro ANYCUBI Kobra Voxela Aquila C2 S2 X2 Magician X

it has a distinctive frosted feel,Uniform powder coverage and good flatness make the bottom layer of the model have high molding rate and no warping of the model printing, which improves the printing success rate.

glass platform has better adhesion and can firmly adhere to the printed model.Semi-tempered glass hardness up to 8 Mohs, good thermal conductivity, can withstand high temperature of 400 ℃, durable without reducing adhesion performance, recommended hot bed temperature 60 ℃ - 100 ℃.

The model can be easily detached after the platform plate has cooled without the use of other tools.

Read more Read less

Toaiot FAQs

How much do Toaiot products cost?

Toaiot 235x235mm Removable Flexible Build Plate Ja... is the top 1 product we recommend in the Toaiot buying guide, which is priced at £30.99, you can view it on Amazon page.
Toaiot 3D Printer Parts Hotbed E-Leveler 3D Printe... is one of the popular products we recommend in the Toaiot buying guide, which is priced at £17.99, you can view it on Amazon page.
Toaiot 3D Printer DIY Accessories 196.8 inch 6mm F... is the cheapest product in the Toaiot picks list, which is priced at £11.99, you can view it on Amazon page.
Toaiot Ender 5 Plus 3D Printing Platform FYSETC Ja... is the most expensive product in the Toaiot picks list, which is priced at £65.99, you can view it on Amazon page.

Where can you buy Toaiot products?

You can purchase Toaiot products from the seller Liying Official-UK, over the last 12 months, the seller has received honest feedback from 65 consumers, and the average rating is 4.87. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of Toaiot?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Toaiot is worth your consideration.

Similar Brands