Innomaker feature image

Innomaker

Review rating Review rating Review rating Review rating Review rating 4.6

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Innomaker range from £12.9 to £242.46, and the average price of all the products is about £57.63. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Innomaker has a relatively small number of products for sale, only 30. We analyzed some of them in detail and recommended them to our readers. The Innomaker review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

Innomaker Best Sellers

Last Updated: 15 Jun 2023

InnoMaker Rasp Pi HiFi DAC Hat PCM5122 Audio Sound Card Expansion Board for Raspberry Pi 4 3 B B+ Pi Zero W (DAC Hat)

Absolutely perfect to support all Raspberry Pi music playback system, like LibreElec, OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
Comes with software, document and friendly technology support. For more information, please refer to our wiki(view the link on color page comes with the goods).
Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.

BeagleBone Blue Evaluation Board, All-in-one Linux-Based Computer for Robotics, Community Supported

AM335x 1GHz ARM Cortex-A8 processor 512MB DDR3 RAM
Processor: Octavo Systems OSD3358
ARM Cortex-M3 USB2 client for power & communications, USB2 host Programmed with Debian Linux
4GB 8-bit eMMC flash storage Integrated power management
2×32-bit 200-MHz programmable real-time units (PRUs) NEON floating-point accelerator

InnoMaker Bluetooth 5.0 Audio Receiver Home Stereo System HiFi DAC Streaming Music Adapter Support LDAC/AptX-HD/AptX-LL/AptX/AAC/SBC Outputs L/R RCA 3.5mm Headphone Jack AUX (Black)

[HiFi Quality Sound] Latest version Bluetooth 5.0, LDAC/AptX-HD/AptX-LL/AptX/AAC/SBC codec makes it ability to deliver HiFi quality music, gives you music the way it was meant to be heard. Compatible with earlier version of Bluetooth devices.
[Ideal Choice for Music System] The bluetooth 5.0 audio receiver Skylark-2 was made to add hight quality high definition wireless music to any home or car music system. With simple setup (no apps/softwear needed) and auto pair mode, you can play any music with music system by streaming from any bluetooth enabled device such as your phone, tablet or laptop.
[Plug and Play] Easy to setup and use, plug and play, fast connection. No apps, software driver, password, key or networking required. Once plugged in, the device automatically makes itself available to be paired.
[Output & Accessories] Supports a pair of gold plated RCA jacks(L/R) and a 3.5mm high-end headphone/AUX jack, Included 2 x RCA cables and 1 x Micro USB cable.
[About TECH] This bluetooth 5.0 audio receiver build-in low latency class-leading stereo audio DAC PCM5122, CSR8675 chip, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. High gain antennacovers radius up to 30 meters.

InnoMaker LA1010 USB Logic Analyzer 16 Input Channels 100MHz with The PC Software Handheld Instrument,Support Windows (32bit/64bit),Mac OS,Linux

16 channels of digital signal could be sampled at the same time, and then they could be converted to digital waveform and displayed on the PC screen.
LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz. Along with the PC software KingstVIS.
The signal could be analyzed with many standard protocols, to get more straightforward communication data.
Supported OS: Support Windows (32bit/64bit),Mac OS,Linux
It helps a lot in testing and analyzing digital system(MCU/ARM/FPGA, etc.), developing and debugging several communication programs, or monitoring and recording some digital signals for a long time.

Raspberry Pi HiFi Amplifier 25W Class-D Power AMP Hat TAS5713 Audio Sound Card for Raspberry Pi 4 3 B+ Pi Zero Nichicon Capacitor

Absolutely perfect to support all Raspberry Pi music player system, such as OSMC, Max2Play, RuneAudio, Volumio, Moode, Pi CorePlayer, Pi MusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
The HiFi AMP Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ through the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering required. Easy to get more beautiful and fantastic sound by this RPI+AMP HIFI suits.
On-board TAS5713 is a 25-W Class-D digital-audio power amplifier for driving stereo bridge-tied speakers. Offers low distortion and acoustically accurate audio reproduction.
Comes with software, document and friendly technology support. For more information please refer to our wiki(view the link on color page comes with the goods).
Accept a wide range of input data 8-Khz to 48-Khz, Up to 90% Efficient, Supports speakers 4 Ohm impedance allows you to enjoy high quality audio.

innomaker Raspberry Pi Industrial Camera Module STARVIS IMX327LQR Color CMOS Sensor 2.13M Pixel Wide Angle Fisheye Lens for Rasp Pi 4 3B+ 3B A+ CM3+ CM3

Sensor Type: STARVIS IMX327LQR Color CMOS Active Pixel type Solid-state Image Sensor with Square Pixel Array 2.13 M Effective Pixels. Diagonal 6.46 mm (Type 1/2.8). Pixel count: 1920x1080.
Raspberry Pi Camera CAM-MIPI327RAW is an Industrial Camera Module for Raspberry Pi 4 3B+ 3B A+ CM3+ CM3.
This Pi Camera IMX327LQR module connects via a ribbon cable to the CSI connector on the Raspberry Pi. CSI-2 output: 2 lanes/RAW10 or RAW12. CSI-2 default speed: 891Mbps/lane. It is a fully V4L2 compatible device.
Including a Wide Angle Fisheye Lens. Lens Holes: 20mm, 2xD2.0mm. Field of View: D=148 degrees, H=118 degrees. The lens is replaceable, Mounting Holes: 4xD2.2mm.
CAM-MIPI327RAW Raspberry Pi Camera Module provides user manual, drivers, source codes from wiki. Support customozed production service.

UART Female DB9 Port to OBD2 OBDII 16PIN Cable fits USB2CAN module of InnoMaker

UART Pin 2 to OBD Pin 14(CAN_L) and UART Pin 7 to OBD pin 6(CAN_H). The rest are not connected.
This cable allows you to use USB2CAN module conncet to your car's OBDII connector.
Length 100cm, Easy to connect.
It's not a finished product of OBDII diagnostic scanner. You need to do secondary development by yourself.
If use for any other OBDII diagnostic scanner, please Pin-Out Match.

innomaker Lidar Built-in DTOF Radar 360 Degree Omni-Directional Scanning 25000 Lux Resistance TOF Flight Time Ranging(LiDAR_LD19) Support ROS/ROS2

[25000 lux resistance to strong light] Based on the PRINCIPLE of TOF, LDS06 is equipped with first-class filtering processing technology, which can effectively avoid the interference of strong light, resist the strong light environment of 25000Lux, and achieve high-frequency and high-precision distance measurement and accurate mapping inside and outside the room.
[Super long lifetime of 20,000 hours] Brushless motor, high-speed wireless data transmission, service life can reach 20,000 hours. The extremely long detection range can sense the environmental information of the farther range, which ensures the large area scanning and mapping ability of the robot.
[TOF time of flight ranging technology] TOF (Time of Fight) flight Time ranging technology is adopted to measure the distance according to the flight Time of laser pulse. Within the effective detection range of 12M, the ranging accuracy of the radar will not change with the distance, and can reach the measuring accuracy of 2mm.With the first-class algorithm of the LDRobot, the robot can realize 360° environment detection, independent mapping and obstacle detection.
[Super Sensitivity to black objects] LDS19 has accurate detection of black object distance, wide detection range, fast tracking, locking number of targets, strong anti-interference ability. Ultra-thin structure design, fashionable appearance, smaller size, lower power consumption, can be built into the machine, reduce the size of the whole machine, improve the robot throughly.
[IPX4 waterproof and dustproof] LDS19 adopts integrated interface design, compact structure design, network protocol for cloud data transmission, the whole machine is dustproof and waterproof to IPX4 level. LDS06 lasor module rotates in clockwise to achieve a 360°omni-directional scanning and measurement of the surrounding, for the mapping contour of the surrounding environment and the point cloud information of the location of obstacles.

InnoMaker LA2016 USB Logic Analyzer Full 16 channels 200MHz sampling rate with the PC software handheld instrument,Support Windows (32bit/64bit),Mac OS,Linux

It is composed of two parts: software on personal computer and hardware equipment. It has the advantages of high sampling rate, large sampling depth, easy to use, etc.
LA2016 is a high-performance logic analyzer with 16 full channels and 200MHz sampling rate.
Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc.
Support OS: Support Windows (32bit/64bit),Mac OS,Linux
LA2016 can sample 16 digital signal at same time. Then the sampled data can be displayed, analyzed, exported and saved on the computer. Software can also decode the data if it conform to the standard protocol of the software supported. Then the decoded data can be displayed, exported and saved.

Industrial USB to RS485 Converter FTDI FT230 Fast Communication Chip Automatic Transceiving support Windows 10,8,7 XP Mac Os and Linux

[Plug and Play USB Device] USB 2.0 full speed compatible. Support wider RS485 data transfer rates, From 300 bps to 1Mbps.
[High Compatibility] This USB to RS485 Converter support Windows XP/7/8/10, Mac OS, Linux 3.2 greater, Ubuntu 11.10 greater and Android system.
[Industrial Design] Isolated power supply and isolation signal design, Provides Bus-Pin ESD protection up to 15kV(HBM) and greater than 25kV/us CMTI.
[Flexible] 120 Ohm resistor jumper selectable. designed by 1/8 unit load, support up to 256 nodes on a bus.
[Excellent Chipset] On board FTDI FT230X and semi-duplex enhanced RS485 isolated transceiver TD541S485H.

Raspberry PI Camera OV7251 Sensor with Global Shutter External Trigger Stream Mode 0.3MP Frame Rate up tp 158fps 8bit 10bit rawdata Format for Raspberry Pi 4B 3B+ 3B 3A+ CM3+ CM3 Pi Zero W

Output formats: 8bit RAW BW and 10 bit RAW BW.
Active array size: 640x480, global shutter.
Support 4 work mode, Software trigger input support,driver feature support : gain, exposure, hflip, vflip
Optical coupled isolated external trigger input and flash output support
Frame rate: 158fps.

Ethernet Mdeia Converter Device 2-Wire Ethernet BroadR-Reach(100BASE-T1) to Fast Ethernet (100BASE-TX) Automotive IEEE 100BASE-T1 Compliant with 100Mbit/s Transmit

Comes with 1x Unshielded Twisted Pair (UTP) cable and 1x 12V power adapter.
Establishes a direct point-to-point conversion between automotive ECU's using 100BASE-T1/BroadR-Reach(100 Mbit/s Fullduplex,) and any standard Fast Ethernet (100 Mbit/s, 100BASE-TX) device with an standard ethernet RJ45 connector.
Plug and Play, No need to install the drivers.
Features with 100BASE-T1 Master / Slave configuration and link LED.
By using the Broadcom BroadR-Reach PHY BCM89811B1AWMLG, ensure a trustworthy and effective tool to customers that are looking for a cost-efficient, quick and manageable solution for testing requirements, with no latency and no packet loss.

innomaker 1TB SLC Cache 3D NAND TLC NVMe M.2 2280 PCIe Gen 3x4 Internal SSD Solid State Hard Drive Memory Card Read/Write Speed up to 3500/2200MB/s for Laptop PC Desktop ARM SBC Boards (1TB)

[Widely-Support] NVMe (PCIe Gen 3.0 x 4),M.2 (2280), 3D NAND. Compatible OS: Windows 11/10/7/XP, Linux,Ubuntu, Mac OS: 10.X+.
[High-Speed-Transfer] CrystalDiskMark(CDM) sequential speeds Up To: Read 3500MB/s, Write 2200MB/s(Internal Test), low latency of the operating system and game/software.
[Long-Lifespan] Self-Monitoring Analysis and Reporting Technology(S.M.A.R.T.) and high-quality power management to achieve multi-level power-savings and to prevent overheating, reduce power consumption.
[High-Performance] Supports SLC Caching, HMB technology and Intel Smart Response technology. Greatly enhance computing performance.
[Easy-To-Use] Free technical support and Customer design service. 

InnoMaker 32GB Micro SD Card U1 A1 Class10, up to 100MB/s High Speed TF Card (32GB)

High performance: 32 GB memory card features support UHS-I, U1, speed class 10, video speed class 10 (V10), which offers high read speed, fast file transfer speed, smooth as well as continuous photo shooting and full HD video 720P and 1080P recording. For apps, A1 (app 1) performance is continuous 1500 read IOPS, 500 write IOPS, which helps not only run faster, but also save smartphone's or tablet's storage memory.
High speed: 32 GB TF card supports up to 100 MB/s read speed and up to 25 MB/s write speed for data transfer. Based on internal test environment with CrystalDiskMark and HDPARM tools.
Wide support: compatible with smartphone, tablet, drone, action camera and other Android devices. It provides you with speed and storage to capture more adventures OTG, also gives you fast gaming experience.
Vast storage: by default the 64G micro SD card is formatted as exFAT, supports up to 1.5+ hours 4K video, or up to 5+ hours 720P video, or 9,000+ photos, 4,500+ songs. Actual available capacity for data storage is less than as listed on the product description due to formatting and other functions.
Plug and play: comes with micro to SD adapter and transparent protective case.

InnoMaker Preloaded Raspberry Pi OS TF Card 32GB for All Raspberry Pi Boards, Micro SD Memory Card for Raspberry Pi (32GB)

Pre-loaded system: Raspberry Pi 64-bit OS, Debian 11 Bullseye, Kernel version 5.15.
InnoMaker 32GB TF card pre-loaded with Raspberry Pi 64bit OS, plug and play.
Supports up to 100MB/s read speed and up to 25MB/s write speed for data transfer. (performance may vary based on host device, interface, usage conditions, and other factors)
Passed the SD card speed test by Raspberry Pi build-in diagnostics tools.
Micro SD memory card supports U1, speed class 10. Feature with high random read/write speed. Give you a better user experience.

innomaker CAN DB9 120ohm Selectable Terminal, CAN DB9 Female to 3 pins Terminal (4 Pack)

Feature with 120 Ohm selectable jumper cap. between pin2 and pin7 built-in high-precision up to one 120 ohm resistance.
4 pcs DB9 Female port to three pins terminal.
Minisize, easy to install.
DB9 PIN 2 to CAN_L, DB9 PIN 7 to CAN_H, DB9 PIN3 to GND.
Comes with two screws for fixed.

Raspberry Pi Industrial Camera Module STARVIS IMX462 Color CMOS Sensor 2MP Pixel for All Raspberry Pi,Support Bullseye libcamera and Raspbian Build-in Driver

Sensor Type: STARVIS IMX462LQR Color CMOS Active Pixel type Solid-state Image Sensor with Square Pixel Array 2 MP Effective Pixels. Diagonal 6.46 mm (Type 1/2.8). Pixel count: 1920x1080. High to 60 fps.
Raspberry Pi Camera CAM-MIPI462RAW is an Industrial Camera Module for all Raspberry Pi.
This IMX462 module connects to the CSI connector on the Raspberry Pi directly. Using the build-in driver same as imx290(74.25M Hz).
Match a wide angle Lens. Fov(D)=148 degrees, Fov(H)=118 degrees. Focal distance is adjustable.
Comes with user manual, test demo and friendly technology support. We offer custom-design service.

2-Pack 5ft 3.5mm Stereo to XLR Balanced Male Cable with 24 AWG Copper Wire

3.5mm gold-plated connector fit perfectly with all 3.5mm XLR jack , easy to connect to the XLR port of audio device, mixer, preamp, or recorder.
2 pcs 5ft(1.5M) 3.5mm Stereo to XLR Balanced Male Cable.
The 24 AWG (American Wire Gauge) oxygen-free stranded copper inner core delivers the best possible conductivity, preventing dropped or lost signal.
Professional Nickel-Plated Pins of XLR connector, anti-corrosion and oxidation resistance. With multiple plug-and-pull tests, this 3.5mm to microphone cable is perfect for your daily use.
Features with 99% shielding that makes sure the audio signal coming from your microphone to a mixer cancels out EMI/RFI noises.

Industrial USB 2.0 to RS485 Converter Adapter Based on FTDI FT230 Chip Built-in ESD Protection TVS Diode Support Windows 10,8,7 XP Mac Os and Linux

[Plug and Play USB Device] USB 2.0 full speed compatible. Support wider RS485 data transfer rates, From 300 bps to 3Mbps.
[High compatibility] Support Windows XP/7/8/10, Mac OS, Linux 3.2 greater, Ubuntu 11.10 greater and Android system.
[Industrial Design] isolated power supply and isolation signal design, Provides Bus-Pin ESD protection up to 15kV(HBM) and greater than 25kV/us CMTI.
[Flexible] 120 Ohm resistor jumper selectable. designed by 1/8 unit load, support up to 256 nodes on a bus.
[Excellent Chipset] On board FTDI FT230X and semi-duplex enhanced RS485 isolated transceiver TD541S485H.

Innomaker FAQs

You can purchase Innomaker products from the seller InnoMaker, over the last 12 months, the seller has received honest feedback from 42 consumers, and the average rating is 4.64. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Innomaker is worth your consideration.