CNCTEC

5.0

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the CNCTEC range from £9.76 to £22, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. CNCTEC provides their products for a reasonable price, which means the products cost around £16.52 on average. They are affordable options to make your shopping much easier.

CNCTEC offers 176 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The CNCTEC review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

CNCTEC Best Sellers

Last Updated: 14 Jun 2023

CNCTEC Ball Bearing Set for Tamiya TT-01 TT01 Chassis

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you can increase the speed as well as the battery life of your TT01 model.

Durable – the perfect tuning for your RC model. Compatible with Tamiya TT-01 Chis

The ball bearing set is designed for the complete TT-01 chis. It includes 20 ball bearings with metal seal. These are already oiled and can be used immediately.

Single – 12 x ball bearings 1105, 4 x ball bearings 1280, 4 x ball bearings 805 for steering.

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

Pneumatic TE-Plug Fitting 1/8 Inch Male Thread 4 mm, 6 mm, 8 mm, 10 mm or 12 mm IQS Connection T-Piece (1/8 Inch - 10 mm)

Buy on Amazon Find on eBay

Quality – The pneumatic T-compressed air connectors are made of high-quality materials. Body: PA66, release ring: PA 66, gasket: NBR, retaining claws made of stainless steel. For a reliable and secure connection of your compressed air line.

Pneumatic T-piece quick connector with G 1/8 inch thread and two outlets with IQS quick connection 4 mm, 6 mm, 8 mm, 10 mm or 12 mm.

30-day return - Are you not 100% satisfied with our compressed air connectors? Then send the T-pieces back for free and you will receive your money back without ifs and buts. No risk. Corporate headquarters in Germany.

Box contents: 2 x pneumatic T-piece with 1/8 inch thread and two IQS hose connection for externally calibrated pneumatic hose.

Anti-fatigue – T-connector thread G 1/8 inch and two IQS outlets with a diameter of your choice, operating temperature -20 °C to 85 °C, operating pressure - 0.95 to 16 bar, hose connection 4 mm, 6 mm, 8 mm, 10 mm or 12 mm (outside), suitable for: oiled and unoiled pressure. Air, neutral GB. as well as water. IQS push in quick connector.

Read more Read less

Throttle Check Valve Exhaust Throttle 1/4 Inch to 4 mm Hose Industrial Quality

Hydraulic Valves Butterfly Valves

Buy on Amazon Find on eBay

Housing made of robust polyamide 66 / spindle made of brass MS58

High-quality exhaust throttle with 1/4 inch thread and connection for external calibrated hoses 4 mm

Temperature range: 0 °C to max. +60 °C, operating pressure: up to 12 bar

Seal: NBR, retaining claws: Stainless steel

Media: Compressed air, neutral gases

CNCTEC High performance ball bearing set for Tamiya M05 & M06 chassis

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you increase the speed as well as the battery life of your M05 / M06 model.

Durable – the perfect tuning for your RC model. Compatible with the Tamiya M05 & M06 chis.

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

Compatible: The ball bearing set is designed for the complete M05 / M06 chis. It includes 18 ball bearings with metal seal. These are already oiled and can be used immediately.

12 x ball bearings 1105 / 6 x ball bearings 850

IQS ProLine Pneumatic Non-Return Valve 4 mm, 6 mm, 8 mm, 10 mm 12 mm Compressed Air Non-Slip Quick Connector (Diameter 10 mm)

Buy on Amazon Find on eBay

Quality and comfortable: the pneumatic compressed air connectors with check diameter 4 mm, 6 mm, 8 mm, 10 mm or 12 mm straight, are made of high-quality materials. Body: PA66, release ring: PA 66, gasket: NBR, retaining claws made of stainless steel. For a reliable and secure connection of your compressed air line.

Pneumatic hose connector with check function – pneumatic hose connector/check valve, on both sides with IQS quick connection 4 mm, 6 mm, 8 mm, 10 mm or 12 mm.

30-day return - Are you not 100% satisfied with our compressed air check valve? Then send it back for free and you will receive your money back without ifs and buts. No risk. Corporate headquarters in Germany.

Box contents: 1 x pneumatic hose connector with check function straight with IQS hose connection 4 - 12 mm for externally calibrated pneumatic hose.

Anti-fatigue – compressed air check valve IQS, operating temperature -20 °C to 85 °C, operating pressure - 0.95 to 16 bar, hose connection diameter 4 mm, 6 mm, 8 mm, 10 mm or 12 mm (outside), suitable for: oiled and unoiled compressed air, neutral gases and water. IQS push in quick connector.

Read more Read less

CNCTEC Ball Bearing Set for Tamiya TT-02B Offroad Chassis TT02B

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you can increase the speed as well as the battery life of your TT02B model. Suitable for: 58568 Neo Scorcher, 47446 Plasma Edge II Gun Metal Edition, 58630 Plasma Edge II

Durable – the perfect tuning for your RC model. Compatible with Tamiya TT-02B Offroad Chis

The ball bearing set is designed for the complete TT-02B chis. It includes 16 ball bearings with metal seal. These are already oiled and can be used immediately.

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

12 x ball bearings 1105 / 4 x ball bearings 1280

Read more Read less

Adjustable safety valve, 1/4 inch, 3 - 7 bar (not component-tested), compressed air pressure relief valves, boiler compressor valve

Buy on Amazon Find on eBay

Easy to use: the adjustable safety valve is made of high-quality materials. Brass housing, stainless steel spring, NBR seal.

Easy to use – brass safety valve 1/4 inch for mounting on compressed air compressors, pressure boilers or other compressed air systems. This pneumatic safety valve is used to secure maximum pressure in compressed air systems. When the pressure set on the valve is exceeded, the valve opens and blows off until the set pressure is reached plus a hysteresis.

30-day return – you are not 100% satisfied with our safety valve? Then send the safety valve back and you will receive your money back without ifs and buts. No risk. Corporate headquarters in Germany.

Adjustable pressure range 3 to 7 bar, operating temperature -10 °C to 95 °C, suitable for compressed air and neutral gases, free blowing, weight 37 g, total length 46 mm, SW 15 mm.

Read more Read less

CNCTEC High performance ball bearing set for Tamiya TT-02 chassis

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you increase the speed and battery life of your TT02 model.

Durable – the perfect tuning for your RC model. Compatible with Tamiya TT-02 chis.

The ball bearing set is designed for the complete TT-02 chis. It includes 14 ball bearings with metal seal. These are already oiled and can be used immediately.

Insert: 4 x ball bearings 1105, 8 x ball bearings 1005, 4 x ball bearings 1280

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

Set of 2 Pneumatic Reducing Plug Nipple to IQS Hose Connection Set of 2 All Sizes 6-4 8-4 8-6 10-8 12-6 12-8 12-10 mm Plug Nipple to Hose (Plug Nipple 12 mm to 8 mm Shank) leek)

Buy on Amazon Find on eBay

Quality control – the pneumatic plug reducers are made of high-quality materials. Body: PA66, release ring: PA 66, gasket: NBR, retaining claws made of stainless steel. For a reliable and secure connection of your compressed air line. No quality from the inner diameter of the hose.

Pneumatic reduction plug nipple on IQS quick connection. Various sizes to choose from.

30-day return - Are you not 100% satisfied with our compressed air reducing nipples? Then send the reductions back for free and you will receive your money back without ifs and buts. No risk. Corporate headquarters in Germany.

Pressure air reduction plug nipple on hose connection for externally calibrated pneumatic hose, operating temperature -20 °C to 70 °C, operating pressure - 0.95 to 12 bar, various sizes to choose from: 6 - 4 mm, 8 - 6 mm, 10 - 6 mm, 10 - 6 mm. 8 mm, 12. - 6 mm, 12 - 8 mm, 12 - 10 mm, suitable for: oiled and unoiled compressed air, neutral gases and water. IQS push in quick connector.

Box contents: 2 x pneumatic reducer straight with plug nipple and IQS hose connection for external calibrated pneumatic hose.

Read more Read less

Pneumatic reducer IQS set of 3 6-8 / 4 -6 / 4-8 / 6-10 / 8-10 (8 - 10 mm)

Buy on Amazon Find on eBay

Quality and comfortable: the reducing pneumatic compressed air connectors are made of high-quality materials. Body: PA66, release ring: PA 66, gasket: NBR, retaining claws made of stainless steel. For a reliable and secure connection of your compressed air line. No quality - to the inner diameter of the hose

Easy to use: pneumatic hose connector/quick connector reducing on both sides with IQS quick connection. Various sizes to choose from.

30-day return - Are you not 100% satisfied with our compressed air connectors? Then send the connectors back for free and you will receive your money back without ifs and buts. No risk. Corporate headquarters in Germany.

Loading – 3 pieces pneumatic hose connector reducer straight with IQS hose connection for external calibrated pneumatic hose.

Anti-fatigue – compressed air connector IQS reduction, operating temperature -20 °C to 70 °C, operating pressure - 0.95 to 12 bar, hose connection diameter 4 - 6 mm / 4 - 8 mm / 6 - 8 mm / 6 - 10 mm / 8 - 10 mm (outside), suitable for: Oiled and unoiled compressed air, neutral gases and water. IQS push in quick connector.

Read more Read less

Adjustable safety valve, 1/8 inch, 8 - 12 bar (not component-tested), compressed air pressure relief valves, boiler compressor valve

Buy on Amazon Find on eBay

Easy to use: the adjustable safety valve is made of high-quality materials. Brass housing, stainless steel spring, NBR seal.

Easy to use – brass safety valve 1/8 inch for mounting on compressed air compressors, pressure boilers or other compressed air systems. This pneumatic safety valve is used to secure maximum pressure in compressed air systems. When the pressure set on the valve is exceeded, the valve opens and blows off until the set pressure is reached plus a hysteresis.

Adjustable pressure range 8 to 12 bar, operating temperature -10 °C to 95 °C, suitable for compressed air and neutral gases, free blowing, weight 33 g, total length 46 mm, SW 15 mm.

Read more Read less

CNCTEC Ball Bearing Set for Tamiya TL-01 Chassis

Remote Control Power Plant & Driveline Systems

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you increase the speed and battery life of your TL01 model.

Durable – the perfect tuning for your RC model. Compatible with Tamiya TL-01 chis.

The ball bearing set is designed for the complete TL-01 chis. It includes 24 ball bearings with metal seal. These are already oiled and can be used immediately.

Insert: 24 x ball bearings 1105

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

CNCTEC Ball Bearing Set for Tamiya Fighter DT-02 / DT-03 Tuning Kit Neo Fighter AQROSHOT

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you increase the speed as well as the battery life of your DT-03 / DT-02 model.

Durable – the perfect tuning for your RC model. Compatible with the Tamiya DT02 & DT03 chis.

The ball bearing set is designed for the complete DT-03 / DT-02 chis. It includes 14 ball bearings with metal seal. These are already oiled and can be used immediately.

Single – 14 x ball bearings 1105

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

CNCTEC High performance ball bearing set for Tamiya Monster Beetle Frog Black Foot

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you increase the speed as well as the battery life of your model.

Durable – the perfect tuning for your RC model. Compatible with Tamiya models: 58038 Subaru Brat, 58040 Lancia Rally, 58041 Frog, 58058 Blackfoot, 58633 Blackfoot (2016), 58618 Monster Beetle (2015), 58077 Mud er, 58060 Monster Beetle, 58101 Bush . 58110. Super Blackfoot, 58192 King Blackfoot

The ball bearing set is designed for the complete chis. It includes 14 ball bearings with metal seal. These are already oiled and can be used immediately.

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

12 x ball bearings 1105 / 2 x ball bearings 850

Read more Read less

CNCTEC High performance ball bearing set for Tamiya TA-03 chassis TA-03R TA-03R-S

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you increase the speed as well as the battery life of your TA03 model.

Durable – the perfect tuning for your RC model. Compatible with Tamiya TA-03 chis.

Insert: 8 x ball bearings 1105, 4 x ball bearings 1260, 4 x ball bearings 1510, 4 x ball bearings 850, 2 x ball bearings 703

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

Compatible: The ball bearing set is designed for the complete TA-03 chis. It includes 22 ball bearings with metal seal. These are already oiled and can be used immediately.

Read more Read less

CNCTEC High performance ball bearing set for Tamiya Clod Buster

Remote Control Power Plant & Driveline Systems

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you increase the speed as well as the battery life of your model.

Durable – the perfect tuning for your RC model. Compatible with Tamiya models: 58065 Clod Buster, 58089 Bullhead, 58321 Super Clod Buster, 58423 Super Clod Buster (Chrome)

The ball bearing set is designed for the complete chis. It includes 24 ball bearings with metal seal. These are already oiled and can be used immediately.

Insert: 20 x ball bearings 1260 / 4 x ball bearings 850

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

Read more Read less

CNCTEC Ball Bearing Set for Tamiya TA-02 Chassis

Buy on Amazon Find on eBay

Easy to fit – easy of the original plastic slide bearings. By using our ball bearings you increase the speed as well as the battery life of your TA02 model.

Durable – the perfect tuning for your RC model. Compatible with Tamiya TA-02 chis.

Easy to – you are not 100% satisfied with our ball bearing set Then send the set back for and you will receive your without ifs and buts. No risk Corporate headquarters in Germany.

Compatible: The ball bearing set is designed for the complete TA-02 chis. It includes 22 ball bearings with metal seal. These are already oiled and can be used immediately.

12 x ball bearings 1105, 2 x ball bearings 1260, 2 x ball bearings 1510, 6 x ball bearings 850

CNCTEC FAQs

How much do CNCTEC products cost?

CNCTEC Ball Bearing Set for Tamiya TT-01 TT01 Chas... is the top 1 product we recommend in the CNCTEC buying guide, which is priced at £19, you can view it on Amazon page.
Pneumatic TE-Plug Fitting 1/8 Inch Male Thread 4 m... is one of the popular products we recommend in the CNCTEC buying guide, which is priced at £12, you can view it on Amazon page.
Throttle Check Valve Exhaust Throttle 1/4 Inch to... is the cheapest product in the CNCTEC picks list, which is priced at £9.76, you can view it on Amazon page.
Adjustable safety valve, 1/4 inch, 3 - 7 bar (not... is the most expensive product in the CNCTEC picks list, which is priced at £22, you can view it on Amazon page.

Where can you buy CNCTEC products?

You can purchase CNCTEC products from the seller CNCTEC, over the last 12 months, the seller has received honest feedback from 2 consumers, and the average rating is 5. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of CNCTEC?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and CNCTEC is worth your consideration.

Similar Brands