Blue Sea Systems feature image

Blue Sea Systems

Review rating Review rating Review rating Review rating Review rating 4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Blue Sea Systems range from £15.65 to £184.41, and the average price of all the products is about £56.09. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Blue Sea Systems offers a variety of products, there are 306 products available, 19 of which were analyzed in detail and recommended to customers. Our Blue Sea Systems review dives deep into the brand, and introduces you to their bestselling products. Let's get into it!

Blue Sea Systems Best Sellers

Last Updated: 14 Jun 2023

Blue Sea Systems 6006 m-Series Battery Switch ON/OFF with Knob, Red

IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
Blue Sea Systems Battery Switch m-Series ON/OFF with Knob, part number 6006, is a Single Circuit ON-OFF switch. Switches a single battery to a single load group
Robust redesign done in July 2017. Premium warranty & support
Make before break contact design allows switching between battery banks without power interruption
Continuous Rating: 300A, Maximum Voltage: 48V DC

Blue Sea - Systems 5026 St Blade Fuse Block With Cover

Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer
Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits
Positive distribution bus with #10-32 stud
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open
Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels

Blue Sea Systems 5503 ANL 35A to 750A Fuse Block with Insulating Cover, 7.0'' x 2.0''

Accepts 5/16" (M8) ring terminals
Cover included
Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact
For use on systems up to 32 Volts DC
Base Material:Reinforced Polycarbonate.Maximum Cable Size:4/0 AWG

Blue Sea Systems 7650 Add-A-Battery Kit, Beige (7650-BSS)

Tin-plated copper studs for maximum conductivity and corrosion resistance
Simplifies switching. Isolates engine and house circuits. Combines batteries for emergency starting
Shares the charge between two batteries more efficiently than a battery isolator
Includes E-series dual circuit plus battery switch (PN 5511E)
12/24 Volt DC 120 Amp Automatic Charging Relay (PN 7610) automatically combines batteries during charging. Isolates batteries during engine cranking and when not charging

Blue Sea Systems 7210 A-Series White Toggle Circuit Breaker, Single Pole, 15A

The Package Height Of The Product Is 8 Inches
Country Of Origin : Mexico
The Package Width Of The Package Is 7 Inches
The Package Length Of The Product Is 6 Inches

Blue Sea Systems 2410 10 Circuit 20A Terminal Block

10 Circuit 20 Amp AC/DC 300V AC/DC Terminal Block
Closed back design completely insulates power from the mounting surface
Each screw pair is one isolated circuit
Jumpers allow creation of common circuits (sold separately)

Blue Sea Systems 7622 ML-ACR 12V DC 500A Automatic Charging Relay with Manual Control

Includes ML-Series Remote Control Contra Switch PN 2146
Manual control switch provides an added level of safety allowing control with or without power and offering LOCK OFF capability for servicing
Maximum Operating Temperature : 60° C
Automatically manages the charging of two large battery banks

Blue Sea Systems 5502 Class T Fuse Blocks, 320A

Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse
Voltage Max. Operating: 160V DC, Amps Max. Operating: 320A, Class T Fuses: 225A-400A, Mounting: 1/4" (M6) Screws, Terminal Stud Size: 3/8"-16 (M10)
Stud design ensures secure fuse mounting even with high heat
Stainless steel studs provide resistance to corrosion and high torque
One-piece stainless flange nuts ensure safe and secure connections
Insulating cover satisfies ABYC/USCG insulation requirements
Fuse sold separately
Cover breakouts allow wire access in any direction

Blue Sea Systems 5196 Fuse Block MRBF 3Circ Common

Surface mount fuse blocks accommodate three MRBF fuses for consolidated high amperage circuit protection
Voltage Max Operating: 58V DC, Amps Max Operating: 300A per block & 240A per circuit, Terminal Fuses Avail.: 30A-300A, Terminal Stud Size: 5/16"-18 (8mm), Mounting Hole Size: #10 (5mm)
Versatile wiring options allow all wires to come out a single side
Safely provides power to three loads from a single source
One-piece stainless flange nuts ensure safe, secure connections
Label recesses accommodate Blue Sea Systems square format labels for easy circuit identification
Ignition protected when used with Blue Sea Systems' MRBF Terminal Fuse
Fuses sold separately Fit type: Universal Fit
Compatible with vehicle type: marine-personal-craft
Clip-on insulating cover satisfies ABYC/USCG insulation requirements

BLUE SEA 5104 FUSE MEGA 175 AMP/32 VOLT

For use with Blue Sea Systems' MEGA/AMG Fuse Block
Economical fuse for 100-300 Ampere circuit protection
Use with part number 5006

Blue Sea Side Entry CableClam w/Stainless Steel Dress Cap

Simple one-piece design for easy side mount installations
Waterproof side entry for cables without requiring removal of the factory installed connector
Polished 316 stainless steel dress cap conceals mounting hardware and offers protection from UV
Low profile, contoured edge reduces the risk of tangling lines
Includes stainless steel fasteners

Blue Sea Systems AC 0-100A Ammeter with Coil

Internal Shunt
Simple 4-wire connection
Meets UL1500 and ISO8846 ignition protection requirements

Blue Sea Systems 5005 ANL Fuse Block with Insulating Cover, 35-300 Amp, 32V DC

The Package Height Of The Product Is 8 Inches
Country Of Origin : United States
The Package Width Of The Package Is 9 Inches
The Package Length Of The Product Is 10 Inches

Blue Sea Systems 5103 FUSE MEGA 150-AMP 32V, 2.70'' x .64''

For use with Blue Sea Systems' MEGA/AMG Fuse Block
Economical fuse for 100-300 Ampere circuit protection
Use with part number 5006

Blue Sea - Systems Fuse Block Ato 6 Circuit With Ground

Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer
Blue Sea Systems Fuse Block ST Blade 6 Circuit with Ground and Cover, part number 5025, can be used for 24-hour circuits
Positive distribution bus with #10-32 stud
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open
Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels

Blue Sea Systems 1733200 Mini OLED DC Voltmeter, Blue

Convenient DC voltage monitoring on a bright, waterproof, daylight readable OLED screen
Color: Blue, Meter: Voltage, Nominal Voltage: 12V DC/ 24V DC, Resolution: 0.01 DC, Accuracy: +-1%, Cut Out Dimensions: 1-1/8" (28.58mm), Input Voltage Range: 8-36V DC, Lifecycles: 10,000 hours, Operating Current: 15mA, Operating Temperature Range: -40 C – 70 C (-40 F – 158 F)
Reverse polarity protected
Mounts in a common 1-1/8 in hole.Rated IP66 - protected against powerful water jets
Compact size enables mounting in any convenient location

Blue Sea Systems Blue Sea 5007100 Class T Fuse Block w/Insulating Cover - 110 to 200A

Insulating cover satisfies ABYC/USCG insulation requirements. Ignition protected when cover is secure
Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse
Stud design ensures secure fuse mounting even with high heat.Stainless steel studs provide resistance to corrosion and high torque.One-piece stainless flange nuts ensure safe and secure connections.Fuse sold separately
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Cover breakouts allow wire access in any direction

Blue Sea Systems Unisex 1/4' DUALBUS PLUS 150A 1 4 STUD, blue/sea, 1.4 UK

Number of Terminal Studs: 2 per bus
AFFORDABLE PARTS
Number of Screw Terminals: 5 per bus
Dual bus plus 150a BusBar - 1/4 inch -20 stud 5 gang

Blue Sea Systems 2104 PowerBar BusBar with Four 3/8, 600A

Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity
600A PowerBar with four 3/8" terminal studs
Max voltage: 300VAC/ 48VDC
Continuous Rating: 545A AC/ 600A DC
4 mounting holes accept 1/4" screws

Blue Sea Systems FAQs

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Blue Sea Systems is worth your consideration.

Most of the Blue Sea Systems products are produced by Blue Sea and Acr Electronics. The manufacturer provides Blue Sea Systems with a steady supply of products, and they have a good cooperative relationship with each other.