Liqui Moly feature image

Liqui Moly

Review rating Review rating Review rating Review rating Review rating 4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Liqui Moly range from £4.46 to £20, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. Liqui Moly provides their products for a reasonable price, which means the products cost around £10.17 on average. They are affordable options to make your shopping much easier.

Liqui Moly offers 189 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The Liqui Moly review aims to sharpen your understanding of the brand and introduces you to their bestselling products. Just keep reading!

Liqui Moly Best Sellers

Last Updated: 14 Jun 2023

Liqui Moly 4066 Air Flow Sensor Cleaner 200ml

The Cleaner also distinguishes itself by means of a very fast evaporation that is free of residues
Special active solvent for fast and gentle cleaning of sensitive components of the air flow sensor in gasoline and diesel engines
Suitable for use in gasoline and diesel engines
Spray generously onto dirty components such as the hot wire or hot plate and allow the dirt to drip off
Removes contaminants at the hot wire or the hot plate of air flow sensors
Disconnect electrical connection of the air flow sensor and remove the sensor

Liqui Moly P000017 Cera Tec, 1 x 300ml

Cera Tec reduces friction and wear by using chemically and thermally extremely high-resilient ceramic compounds
Cera Tec is a high-tech ceramic wear protection and can be mixed with all commercially available oils
Not suitable for use with wet clutches
Mixable with all commercially available motor oils
Added to the lubricating oil of engines, compressors, pumps and transmissions
300 ml will treat up to 5 L of motor oil

Liqui Moly P000065 Pro-Line Engine Flush, 500 ml

Cleaning and flushing out the oil systems of petrol and diesel engines
Cleans the engine from the inside
Removes deposits from lubrication holes, oil screens, piston ring zone etc.
Reduces engine noise and oil consumption
One 500 ml can is sufficient for up to 5 litres of oil
Improves compression

LIQUI MOLY 2591 Oil additive

Item Package Length: 5.5cm
All of the friction surfaces and furniture.
Item Package Width: 5.5cm
Item Package Height: 18.5cm

Liqui Moly 20004 Hydraulic Lifter Additive 300ml

For all gasoline and diesel engines. Can be mixed with all commercially available motor oils
Prevents hydro tappet noise. Lubrication holes and ducts in the oil circuit are cleaned. Secures optimal hydro tappet performance. Increases the reliability and travel comfort of the vehicle.
One 300 ml can of Liqui Moly hydraulic tappet additive is sufficient for up to 6 liters motor oil. The product can be added at any time. After adding, run the engine until warm.
Not suitable for use on motorbikes with wet clutches.

Liqui Moly 7182 Rubber Care 75 ml

Such as door, window and boot seals.
Specially for care, to protect and treat rubber cap,
Prevents freezing-up in winter
Content: 75ml

Liqui Moly 1538 Rubber Treatment 500ml

Specially used for the treatment, protection and surface preparation of rubber components such as tyres, rubber door seals and mats etc. in the passenger vehicle sector.
Maintains, cleans and beautifies door, window and trunk seals and tires. Prevents freezing-up in winter. Keeps rubber parts elastic and extends the service life.
Remove heavy contamination before use. Thoroughly shake rubber care before use and apply a thin and even layer on the clean, dry rubber sealings with slight pressure using a sponge.
Note: Do not treat pedals, the steering wheel, windscreen wipers and treads!

Liqui Moly 6954 Hydraulic Oil HLP 22 1l

Mineral hydraulic oil with the classification type HLP acc. to DIN 51524 Part 2
Content: 1l, Viscosity ISO VG 22
Wear and corrosion protection as well as the EP properties
Contains select agents to improve the aging resistance

Liqui Moly 1035 1404 GL 5 SAE 85 W-90 Hypoid Gear Oil,1 Liter

For high-load motor vehicle transmissions, particularly axle drives with hypoid gearing.
Mineral low-viscosity hypoid gear oil. For vehicles with tried and tested transmission technology. Even under the most difficult conditions and during large temperature fluctuations, it ensures flawless aggregate functioning.
Only use in manual transmissions for which API GL 5 oils have been stipulated.
During selection, keep to the viscosity class stipulated by the transmission manufacturer. Miscible with all branded gear oils. Fully effective only when used alone.

Liqui Moly Diesel Purge

Eliminates engine operation problems such as knocking in idle and provides round and quiet engine running
Removes deposits on injection nozzles and in the combustion chamber
Used for all diesel engines to prevent and eliminate problems associated with uneven idling and partial-load knocking
Quantity to be used for preventive and remedial use: 500 ml

Liqui Moly 1273 Universal Garden Tool Oil 10 W-30 1 Litre

Optimum engine cleanliness
Content: 1l
The operating regulations of the engine and tool manufacturers must be followed.
Part number: P000350
Package Dimensions: 6.4 L x 18.6 H x 15.0 W (centimeters)
Number of items: 1.0
Modern multigrade motor oils for year-round use

Liqui Moly 1611 Rust Solvent Xxl 600ml

Loosens stuck screws and nuts in little time
Extra-fast acting Rust Solvent
The rust is tunneled and loosened
It penetrates even narrow passages

Liqui Moly 3077 Anti-Squeak Brake Paste 100 g

Covers very well and is resistant to road salt and water spray
Synthetic grease for the braking system
Used for basic lubrication and as a preventive measure against brake squeals
For the entire brake system on disc brakes, bolts and pins, as well as the mounting points on drum brakes

Liqui Moly 1414 Fully Synthetic Gear Oil (Gl 5) Sae 75W-90 1L - Black

Ensures exact friction behavior and provides outstanding ageing resistance
Full synthetic transmission oil
The requirements of the vehicle and transmission manufacturers must be adhered to
Miscible with any mineral-base oil residues remaining during oil changes in transmissions and axle drives
For extremely high-load manual, auxiliary, transaxle and hypoid transmissions
Even under the most difficult conditions and during large temperature fluctuations, it ensures flawless aggregate functioning

Liqui Moly 3510 LM 47 Long-Life Grease + MoS2 100 g

For mounting, maintenance and repair of vehicles, tools, building trade and agricultural machines
The MoS2 contained in the selected base grease gives it outstanding lubrication properties and high performance properties, unlike normal greases
This film retains its lubricating action for a long time even after the grease supply completely fails
Suitable for constant velocity joints
High quality special grease
For high load-bearing areas and joins, spline shafts, threads and guides
During operation, a permanently adhering, ultra-thin molybdenum disulfide film forms on the sliding points

Liqui Moly 1818 Mtx Carburetor And Valve Cleaner 300ml

Used as an additive for the fuel of all 2-stroke and 4-stroke petrol engines, especially for motor vehicle engines. Also used for small engines for ships and industry.
Increases engine performance. Removes deposits in carburetor, in valves, spark plugs and in the combustion chamber and prevents renewed formation. Saves fuel. Improves compression.
When decommissioning and preserving engines, add Carburettor Cleaner to the petrol at the rate of 1 %. Follow the instructions for decommissioning and preserving engines.
One 300 ml can is sufficient for 70 litres of fuel. Mix the contents of the can with the fuel. Mixing takes place automatically.

Liqui Moly 1402 GL 5 SAE 80 W Hypoid Gear Oil

For high-load motor vehicle transmissions, particularly axle drives with hypoid gearing.
Mineral low-viscosity hypoid gear oil. For vehicles with tried and tested transmission technology. Guarantees the greatest safety reserves under critical conditions. Provides a stable lubricating film. Minimizes wear.
Only use in manual transmissions for which API GL 5 oils have been stipulated.
During selection, keep to the viscosity class stipulated by the transmission manufacturer. Miscible with all branded gear oils. Fully effective only when used alone.

Liqui Moly 1040 Gearbox Oil Additive 20 g

For gearbox, driveshaft and differentials - especially under high thermal loading Contents are enough for up to 1 litre of gearbox oil Not for motorcycles with a wet clutch
The MoS2 additive builds a durable film of lubrication on a rubbing and sliding surfaces Prevents rubbing and wear and disperses temperature peaks
The transmission heats up less and benefits from smoother tooth faces in terms of quieter running and improved performance
MoS2 reduces temperature peaks and ensures quieter running and smoother shifting
Contains highly concentrated MoS2 to reduce wear in manual and differential transmissions, axle drives without integrated wet differential locks and mechanical steering systems

Liqui Moly 1803 Injection Cleaner 300ml

Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents them from reforming. Eliminates start problems and rough engine running.
For Petrol Engines
Repeat treatment if problems reoccur. Suitable for all gasoline injection systems.
One 300 ml can is sufficient for up to 70 liters of fuel. This product is effective over 2,000 km. Injection Cleaner can be mixed with fuel at any time since mixing is spontaneous.
One 300 ml can is sufficient for up to 70 liters of fuel. This product is effective over 2,000 km. Injection Cleaner can be mixed with fuel at any time since mixing is spontaneous.
For rectifying problems such as difficulties with starting, irregular idling, poor throttle response, performance losses, surges due to lean mixture and poor exhaust values caused by contaminated injection systems.

2 x Liqui Moly Diesel Particulate Filter Protector DPF Cleaner Regenerator 250ml


Liqui Moly FAQs

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Liqui Moly is worth your consideration.

Most of the Liqui Moly products are produced by LIQUI MOLY GmbH and Liqui Moly GmbH. The manufacturer provides Liqui Moly with a steady supply of products, and they have a good cooperative relationship with each other.