Skip to content
SHENGHUISS feature image

SHENGHUISS

4.3
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the SHENGHUISS range from £14.57 to £27.66, and the average price of all the products is about £20.78. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

SHENGHUISS offers 106 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. This SHENGHUISS review will give you insight into the products they offer so you can make a better informed decision before you make your purchase.

Share

SHENGHUISS Best Sellers

Last Updated: 16 Jun 2023

SHENGHUISS 2 Pack Boat Door Lock Latch Anti-Rattle 316 Stainless Steel Marine Hardware Lockable Hold Down Clamp Latch Fastener Clamp with Screws

SHENGHUISS 2 Pack Boat Door Lock Latch Anti-Rattle 316 Stainless Steel Marine Hardware Lockable Hold Down Clamp Latch Fastener Clamp with Screws Cover
  • Boat lockable hold down clamp latch locker hatch made of stainless steel 316.Boat hatch latches are maximum corrosion resistance and durability
  • Marine lockable hold down clamp anti-rattle latch. the width:1.9inch (48.7mm) ;the length:4.5inch (114mm),the detail size refer to the left picture
  • Product includes : 2 pieces of Boat Door Lock Latch and 8 pieces of 10# Screws (All accessories are stainless steel 316)
Buy on Amazon Find on eBay
Wire Rope Thimbles

SHENGHUISS 2Pcs M10 Marine Stainless Steel 316 Thimble, Wire Rope Cable Thimbles Eyelet Rigging for 3/8 Inch Wire Rope Cable

SHENGHUISS 2Pcs M10 Marine Stainless Steel 316 Thimble, Wire Rope Cable Thimbles Eyelet Rigging for 3/8 Inch Wire Rope Cable Cover
  • Wire Rope Thimble Size: 3/8 rope thimble (12mm). Suitable for 10mm diameter wire rope or Cable.2 pack of Wire Rope Thimbles
  • Wire Rope Thimbles 3/8 inch, Forged from 316 stainless steel,seawater corrosion resistance.
  • We will solve a series of possible problems such as use, replacement, and refund due to quality problems for you. Guarantee your perfect shopping experience.
Buy on Amazon Find on eBay

SHENGHUISS 4 Pack 1 Inch Boat Bimini Top Fittings Nylon Eye End Cap,Marine Bimini Top Hardware Cover Cap Eye End (Internal Version for 1" O.D. Tube)

SHENGHUISS 4 Pack 1 Inch Boat Bimini Top Fittings Nylon Eye End Cap,Marine Bimini Top Hardware Cover Cap Eye End (Internal Version for 1" O.D. Tube) Cover
  • Bimini top nylon eye end cap are very durable and lightweight,made of high-impact nylon for salt water environment.
  • Boat bimini top eye end cap black nylon internal version,easy to assemble and install.
  • Package Includes:4 pcs bimini top nylon eye end cap.
Buy on Amazon Find on eBay

SHENGHUISS 2 Pack 5/16" (8mm) Heavy Duty Chain Link Connector, 316 Stainless Steel Marine Grade C-Link Split Connecting Boat Anchor Chain Link

SHENGHUISS 2 Pack 5/16" (8mm) Heavy Duty Chain Link Connector, 316 Stainless Steel Marine Grade C-Link Split Connecting Boat Anchor Chain Link Cover
  • The Chain Link Connector is made of stainless steel 316, suitable for marine environment , acid and alkali resistant, anti-rust.
  • Chain Link Connector suitable for 5/16 inch (8mm) chain,External Dimensions 41mm x 29mm;Internal Dimensions 25mm x 13mm.
  • Working Load Limit (WLL) : 1600 lbs.
Buy on Amazon Find on eBay
Rigging for Sailing

SHENGHUISS 2 Pack 5/16 Inch D Shackle Stainless Steel 316 Boat Anchor Dee Ring Shackle Forged Marine Hardware

SHENGHUISS 2 Pack 5/16 Inch D Shackle Stainless Steel 316 Boat Anchor Dee Ring Shackle Forged Marine Hardware Cover
  • Marine Forged D Anchor Shackle Working Load : 1300lbs ;Breaking Load: 4850lbs.
  • Stainless Steel 316 D Shackle Diameter - 5/16 inch(8mm); Pin Diameter - 5/16 inch(8mm) ; The opening size of the D-shaped shackle is 0.65 inch(16mm) and the internal length is1.1 inch (28mm).
  • The D Shackle is made of stainless steel 316, suitable for marine environment and corrosion resistant.
Buy on Amazon Find on eBay
Quick-release Pins

SHENGHUISS Pair 5/16 Inch(8mm) Bow Shackle Marine Stainless Steel 316 Bolt Type Forged Bow Anchor D Ring Shackle Hardware Rigging with Cotter Pin Lock

SHENGHUISS Pair 5/16 Inch(8mm) Bow Shackle Marine Stainless Steel 316 Bolt Type Forged Bow Anchor D Ring Shackle Hardware Rigging with Cotter Pin Lock Cover
  • Bolt Type Forged Bow Anchor Shackle Working Load : 1168lbs ;Breaking Load: 4850lbs
  • Stainless Steel 316 Bow Shackle Diameter - 5/16 inch; Pin Diameter - 3/8 inch ; Inside Width Opening at Pin - 0.5 inch ;
  • US Style of 5/16" Stainless Steel 316 Bolt Type Bow Shackle with Cotter Pin Lock, ideal for anchor chain and ropes
Buy on Amazon Find on eBay
Chain Shackles

SHENGHUISS 2 Pcs 5/16 Inch (8 mm) Stainless Steel 316 Forged Bow Anchor Shackle Screw Pin Marine Hardware Rigging

SHENGHUISS 2 Pcs 5/16 Inch (8 mm) Stainless Steel 316 Forged Bow Anchor Shackle Screw Pin Marine Hardware Rigging Cover
  • Forged Bow Anchor Shackle Working Load : 1168 lbs ; Breaking Load :4850 lbs;
  • Stainless Steel 316 Shackle Diameter - 5/16 inch(8mm); Pin Diameter - 3/8 inch(10mm) ; Inside Width Opening at Pin - 0.53 inch(13.5mm) ;
  • US specification of 5/16" Stainless Steel 316 Shackle , ideal for anchor chain and ropes
Buy on Amazon Find on eBay
Boat Fuel Tanks

SHENGHUISS Boat GAS Fuel Tank Vent for 5/8" Hose, Stainless Steel 316 Marine 90 Degree Thru-Hull Fuel Gas Tank Vent with Mounting Gasket Hardware

SHENGHUISS Boat GAS Fuel Tank Vent for 5/8" Hose, Stainless Steel 316 Marine 90 Degree Thru-Hull Fuel Gas Tank Vent with Mounting Gasket Hardware Cover
  • Mounting hole Require a approx. 0.75 inch/19mm hole, it is designed to connect with 5/8-inch interior diameter hose.the tank vent detail sizes refer to the left picture
  • GAS Fuel Tank Vent outer diameter is 5/8inch(16 mm);inner diameter is 0.46 inch(12mm).Suitable for 5/8 inch inner diameter hose
  • GAS Fuel Tank Vent cast from stainless steel 316,The surface is 100% handmade mirror polished,maximum corrosion resistance and durability in the saltwater environment.
Buy on Amazon Find on eBay

SHENGHUISS 4 Pack 7/8 Inch Boat Bimini Top Fittings Nylon Eye End Cap Marine Bimini Top Hardware Cover Cap Eye End Outside for 7/8" Tube

SHENGHUISS 4 Pack 7/8 Inch Boat Bimini Top Fittings Nylon Eye End Cap Marine Bimini Top Hardware Cover Cap Eye End Outside for 7/8" Tube Cover
  • Bimini fittings top cover cap eye end fits for 7/8'' OD round tube,fits most standard bimini tops.Bimini top caps eye end,There are two standard stainless steel screws on the side of the product, which can better fix the pipe.
  • Bimini top fittings cover cap eye end made of black nylon,It's durable and strong materals for tough saltwater environment.Nylon eye end is very lightweight,solid,strong,Great accessories for kayak,canoe,marine boat,fishing dinghy,raft and so on.
  • Package Includes:4 pcs bimini top eye end cap.
Buy on Amazon Find on eBay
Boat Dock Cleats

SHENGHUISS 4 Pack Boat Dock Cleats 6 Inch Nylon Boat Cleat,Black Marine Cleats,Boat Rope Cleat,Kayak Cleat for Docking Boats,Canoe,Pontoon,Yacht,Kayak

SHENGHUISS 4 Pack Boat Dock Cleats 6 Inch Nylon Boat Cleat,Black Marine Cleats,Boat Rope Cleat,Kayak Cleat for Docking Boats,Canoe,Pontoon,Yacht,Kayak Cover
  • Black boat cleats made of quality nylon,this cleats boating also sturdy,good for salt water environment.these boat dock cleats can serve you for a long time.
  • Nylon boat dock cleat length:6 Inch(160mm),height:1.18 Inch (30mm),about 1.68 Inch (42mm) center to center measurement of two holes.boat rope cleat can accept up to rope diameter 3/8" will fit through the base.
  • dock cleats 6 inch perfect for maritime, beach, garden, pool, coastal decorations; use them as cabinet pulls, towel hooks outdoors, rustic coat hanger, curtain tie-backs, nautical coat hooks; the sky is the limit
Buy on Amazon Find on eBay

SHENGHUISS 2 Pcs 7/8 inch(22.8mm) Boat Bimini Top Jaw Slide Fittings Marine Stainless Steel 316 Heavy Duty Bimini Canopy Hardware for 7/8" O.D. Tube with L Shape Hex Key

SHENGHUISS 2 Pcs 7/8 inch(22.8mm) Boat Bimini Top Jaw Slide Fittings Marine Stainless Steel 316 Heavy Duty Bimini Canopy Hardware for 7/8" O.D. Tube with L Shape Hex Key Cover
  • Bimini Top Jaw Slide Cast from marine grade stainless steel 316 .Seawater corrosion resistance. stainless steel 316 Bimini Top Jaw Slide is a perfect choice to replace your plastic, nylon or broken fittings.
  • Bimini Top Jaw Slide 7/8''(22.8mm) internal diameter ,fits for 7/8'' outside diameter round tubing. 2 screws on each fitting measured M6. Pin: 1/4" bolt holes.
  • Package Includes:2 pieces of 7/8 inch Bimini Top Jaw Slide and 1 piece of L Shape Hex Key.
Buy on Amazon Find on eBay

SHENGHUISS 6 pcs 7/8" Bimini Top Fitting Set,Boat Awning Fittings Hardware Combo Black Nylon Bimini Cap Eye End, Jaw Slides,Deck Hinges Pad Eye w/Screws

SHENGHUISS 6 pcs 7/8" Bimini Top Fitting Set,Boat Awning Fittings Hardware Combo Black Nylon Bimini Cap Eye End, Jaw Slides,Deck Hinges Pad Eye w/Screws Cover
  • Boat bimini top fittings made of black nylon.The bimini top fittings easy to install,very convenient.
  • Bimini top fittings use for 7/8 inch outside diameter round Tube,Fits most of standard bimini tops.Boat eye end caps black nylon bimini fittings can be used for 3 bow or 4 bow boat top cover.
  • These marine bimini top fittings include 2 x eye end caps;2 x jaw slide;2 x deck hinge;installation accessories screws.
Buy on Amazon Find on eBay
Pipe Fitting Nipples

SHENGHUISS 2 Pcs 1/2" NPT x 1/2" NPT Male Threaded 316 Stainless Steel Marine Grade Nipple Pipe Coupling Fitting 4 inches Length Tube Sleeve Extension Connector

SHENGHUISS 2 Pcs 1/2" NPT x 1/2" NPT Male Threaded 316 Stainless Steel Marine Grade Nipple Pipe Coupling Fitting 4 inches Length Tube Sleeve Extension Connector Cover
  • Marine grade stainless steel 316 , which is durable, corrosion-resistant, has low temperature resistance, high temperature ductility and low magnetic permeability;Mirror polished surface, beautiful and easy to clean.
  • Nipple Cast Pipe Connector 1/2"Male NPT x 1/2"Male NPT，4"style is about 100 mm length.
  • Suitable for connection of boat yacht pipe fittings, laying pipes in home construction, gas pipes, mechanical operations, etc.
Buy on Amazon Find on eBay
Boat Plumbing Fittings

SHENGHUISS 1/2" NPT Male Threaded 316 Stainless Steel Thru-Hull Valve Fitting w/Nut Plumbing Thru Drain Connector for Boats, Yachts, RSV

SHENGHUISS 1/2" NPT Male Threaded 316 Stainless Steel Thru-Hull Valve Fitting w/Nut Plumbing Thru Drain Connector for Boats, Yachts, RSV Cover
  • Material: Marine grade Stainless Steel 316, Surface: Mirror polished/High polish finish.Ultimate Corrosion Resistant.Suitable for marine boat,yacht,kayak etc, a good damage part replacement choice;
  • Overall Length:2.45 inch(62.3 mm), Outside flange diameter: 1.54 inch(39mm), inner diameter : 1/2'', Thread Size: 0.8 inch(20.4mm) ,
  • Underside of flange has a groove cut in it to trap a bead of silicone between it and the mounting surface. Flange head is very evenly polished. Nut mates with threads exactly; hardness of metal is excellent. Two slightly protruding pins within the interior of the drain allow for a wide blade flat screwdriver to be inserted and prevents the flange portio from turning when nut is installed.
Buy on Amazon Find on eBay
Boat Fuel Tanks

SHENGHUISS Boat Fuel Tank Vent for 5/8" Hose, Stainless Steel 316 Marine Flush Mount Thru-Hull Fuel Gas Tank Vent with Mounting Gasket Hardware

SHENGHUISS Boat Fuel Tank Vent for 5/8" Hose, Stainless Steel 316 Marine Flush Mount Thru-Hull Fuel Gas Tank Vent with Mounting Gasket Hardware Cover
  • Boat Fuel Tank Vent outer diameter is 5/8inch(16mm);inner diameter is 0.46 inch(12mm).Suitable for 5/8 inch inner diameter hose.4 holes.Easy to install, no drilling or welding required.
  • Effective installation size: suitable for decks with a thickness of 0.05 inch-0.65 inch(1.3mm-16.5mm), suitable for aluminum boats, etc.
  • Mounting hole Require a approx. 1.46 inch/37mm hole, it is designed to connect with 5/8-inch interior diameter hose.
Buy on Amazon Find on eBay

SHENGHUISS 2 Pcs 7/8 inch Bimini Top Cap External Eye End Boat Fitting Heavy Duty Stainless Steel 316 Double Screw Fits 7/8" O.D. Round Tubing with L Shape Hex Key

SHENGHUISS 2 Pcs 7/8 inch Bimini Top Cap External Eye End Boat Fitting Heavy Duty Stainless Steel 316 Double Screw Fits 7/8" O.D. Round Tubing with L Shape Hex Key Cover
  • Bimini Top Cap Cast from marine grade stainless steel 316 .Seawater corrosion resistance. Bimini top eye end is a perfect choice to replace your plastic, nylon or broken fittings.
  • Bimini Top Cap Size: Internal Diameter: 22.8mm (7/8inch);Outside Diameter: 28.8mm (1.1 inch);Thickness: 3mm (0.12 inch); Height: 58mm (2.3 inch);Mounts: 1/4'' bolt holes
  • Product surface treatment mirror polishing, widely used for boating,bass boat,fishing boat, kayak, canoe, yacht,boat cover ,Awning,etc.
Buy on Amazon Find on eBay

SHENGHUISS 2 Pack Marine Deck Hinge,Top Side Mount,Marine Grade 316 Stainless Steel Boat Bimini Top Deck Hinge Fitting Hardware and Yacht Accessories with Screws

SHENGHUISS 2 Pack Marine Deck Hinge,Top Side Mount,Marine Grade 316 Stainless Steel Boat Bimini Top Deck Hinge Fitting Hardware and Yacht Accessories with Screws Cover
  • Professional marine grade cast solid 316 stainless steel.Superior corrosion resistance and durable in the saltwater environment.
  • Side mount, the size of the deck hing is APPROX. 2"(L)*0.9"(W)*1.2 "(H)/ 50*22*31MM
  • Stainless steel 316 deck hinge include installation screws,easy to install.
Buy on Amazon Find on eBay

SHENGHUISS 1 inch(25.8mm 90 Degree 3 Way Corner Elbow Hand Rail Fitting Tee Side Outlet Elbow Tube Pipe Connector Marine Grade 316 Stainless Steel with L Shape Hex Key

SHENGHUISS 1 inch(25.8mm 90 Degree 3 Way Corner Elbow Hand Rail Fitting Tee Side Outlet Elbow Tube Pipe Connector Marine Grade 316 Stainless Steel with L Shape Hex Key Cover
  • 3 Way Corner Elbow cast from stainless steel 316,The surface is 100% handmade mirror polished，Polished beautifully, mirror-like finished and to match modern watercraft/boat/yacht
  • 3 Way Corner Elbow hole diameter is 1 inch/25.8mm,suit for 1"rail. Outer diameter 1.2 inch/30.7mm, height 1.9 inch/ 49mm
  • The wall thickness of the round base is 2.5MM, There are two standard 316 6mm stainless steel screws on the side of each tube, which can better fix the pipe
Buy on Amazon Find on eBay

SHENGHUISS FAQs