Skip to content
Shutao feature image

Shutao

4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Shutao range from £15.7 to £25.88, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. Shutao provides their products for a reasonable price, which means the products cost around £19.44 on average. They are affordable options to make your shopping much easier.

Shutao has a relatively small number of products for sale, only 44. We analyzed some of them in detail and recommended them to our readers. Our Shutao review dives deep into the brand, and introduces you to their bestselling products. Let's get into it!

Share

Shutao Best Sellers

Last Updated: 16 Jun 2023

5Pcs ESP32 Breakout Board GPIO 1 into 2 for 38PIN Terminal Screw Board Compatible with ESP32 ESP-WROOM-32 ESP32-DevKitC Block PCB Microcontroller Development Board

  • Breakout board can expand one GPIO pin of ESP32 development board to two, which is very nice for you to reuse all pins , it is a good tool for your smart home projects. Nice breadboard alternative
  • The esp32 breakout board can expand one GPIO pin of esp32 development board to two.Convenient to reuse all pins in smart home DIY projects.
  • The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.

Shutao 6Pcs ISD1820 Voice Recording Module Recorder Playback Module with Audio Microphones Sound Loudspeaker

  • Recording and playback control mode: button control or single-chip microcomputer, control line IO has been led out.
  • This ISD1820 recording module can directly drive 8 Euro 0.5W small speakers, easy to use 10 seconds voice recording and playback.
  • Power supply:3-5V, can be accessed by pin power, can be used as a megaphone module.

120 Pcs T-Tap Wire Connectors, T-Tap Wire Terminals Self-Stripping Quick Splice Electrical Wire Terminals, Insulated Male Quick Disconnect Spade Terminals Assortment Kit

  • Thick tin copper contacts will not bend even if a thicker wire is tapped in; the quick splice t tap connector will lock firmly to the wire. The plastic case won't open after it is fastened on the steel wire
  • Self stripping electrical T tap connectors will tap into any wire without needing to cut, strip or solder.
  • The tap connector kit allows you to quickly plug in any wire in any application. Connector categories include red (AWG 22-18), blue (AWG 16-14) and yellow (AWG 12) T-tap connectors, which can be used on 22-12 wire AWG.

8Pcs LM2596S LM2596 Buck Converter Step Down Module DC-DC 3-40V to 1.5-35V 3A Voltage Regulator Adjustable Power Supply Voltage Module

  • LM2596 module access to power (3-35V), adjust the blue potentiometer knob (clockwise rotation generally boost, buck counterclockwise rotation) and with a multimeter to monitor the output voltage reaches the required voltage. the output voltage can be adjusted in 1.25-30V, for your phone, MP3, MP4, PSP charging many devices powered, very simple and convenient.
  • LM2596S DC-DC step-down power module input voltage range: DC 3.2V to 35V (input voltage must be higher than the voltage output to 1.5V or more can not be boosted). Output Voltage Range: 1.25V to 30V DC voltage is continuously adjustable, high efficiency (maximum 92%) of the maximum output current of 3A.
  • This buck converter chip is a switching mode power supply with the 150KHz high switching frequency, results in reducing the size of filter components. Due to the high switching frequency, this module is optimized to work with a small inductor.

2PCS 600W DC-DC Module 10V-60V to 12-60V 10A Adjustable Step-Up Power Supply Module 600W DC Booster Constant Voltage Constant Current Power Converter Module

  • DC-DC boost converter module input current: 10A (MAX) exceeds 8A please enhance heat dissipation; Quiescent current: 10mA (12V liter 20V, the output voltage, the higher the current will increase too quiet).
  • 600W power boost converter module has a non-isolated step-up module (BOOST), input DC10V-60V step-up to DC 12-60V output, continuously adjustable
  • Boost converter module adopts imported power management chip design, high reliability, small surge current, small size, the efficiency is as high as 96%, and the maximum power is 600W. the aluminum base plate is designed for easy installation, and the back of the plate can be directly attached to the metal shell to dissipate heat.

2Pcs 8 Channel 24V Relay Module High Low Level Trigger with Optocoupler Isolation Load 8 Ways Relay Switch Module DC 30V AC 250V 10A Home Intelligent Control Module

  • Relay module using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA
  • 8 channel relay module uses genuine quality relay, normally open interfaces maximum load: AC 250V/10A, DC 30V/10A
  • The input and output are 5.08mm wiring terminals, wiring is more convenient, suitable for PLC control.

4Pcs 30Pin ESP32 Expansion Board with Micro Type C Port Suit for ESP32 Development Board ESP-WROOM-32 WiFi Dual Core Development Board

  • Support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
  • ESP32 is a safe, reliable, and scalable to a variety of applications; ESP32 development board support lua program, easy to develop.
  • Support VIN external wide voltage input 5-12V power supply (battery version maximum 5.5V input),

15PCS 12-24V to 5V 3A DC-DC Step Down Power Supply Module MP1584EN Adjustable Buck Converter

  • DC-DC buck converter module output voltage: 0.8-20V
  • Ultra-small DC-DC step-down module, input voltage: 4.5-28V
  • Note: Don't reverse the positive and negative terminals to avoid any possible damage; Do not use light load (less than 10% of output power) or without load

5Pcs LED Strip Dimmer PWM Dimming Controller Led Light Lamps or Ribbon Switch Dimmer Adjustable DC12-24V 8A for LED Lights, Ribbon Lights,Tape Lights, Dimmer Boat RV Camper

  • PWM digital dimming, avoid current, protect your LED lights.
  • PWM dimming controller input voltage: DC12-24V; Max current: 8A; Output: 1 channel; Output power: 12V
  • You can conveniently adjust the brightness of your LED bulbs/Led Strip with this dimmer.

100W Buck Converter 6A DC-DC 10-90V 12V 24V 36V 48V 60V 72V 86 to 1.5V-60V 5V 15V 19V Step Down Power Voltage Regulator Module

  • 100W 6A DC-DC buck converter Input voltage: 10-90VDC; Output voltage: 1.5-60VDC; Output current: 6A(Max); Maximum power: 100W
  • Synchronous rectification is a new technology that uses special power with extremely low on-state resistance to replace rectifier diodes to reduce rectification losses.
  • It can greatly improve the efficiency of the DC/DC converter and there is no dead zone voltage caused by the Schottky barrier voltage.

15Pcs Audio Amplifier Module Mini LM386 Mono Power AMP Module 200 Times Gain Amplifier Board Mono Power Amplifier HiFi DIY

  • Onboard LM386 chip, with 20 multiplier benefits circuit design, on-board speaker wire holder, on-board 10K variable resistor, you can adjust the amplification volume.
  • This audio amplifier module is a mono audio amplifier based on the LM386 chip,which is useful for DIY many HAM radio experiments.It is a very cost effective method of small signal amplification.Very convenient instead of using separate components.
  • This tiny Op Amp module is good and delivers clear crisp sound.Easy to adjust volume with variable resistor.A convenient screw terminal allows the user to connect a suitable loudspeaker without any soldering.

2Pcs PCA9685 16 Channel 12-bit PWM Servo Motor Driver Board I2C interface Controller PCA9685 module Raspberry Pi Shield Module Servo Shield

  • PCA9685 module 2-bit resolution for each output - for servos, that means about 4us resolution at an update rate of 60Hz.
  • PCA9685 IIC module 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs, which is good when you want to control white or blue LEDs with a 3.4V+ forward voltage
  • This is a PCA9685 16 channel I2C communication, built-in PWM driver and a clock.

Shutao 2 Pcs TB6612FNG Motor Drive Module 1.2A Peak 3.2A Compatible with DRV8833 Better Than L298N

  • [Size] 18*21mm. It is small in size, light in weight, easy to install, and can be completed quickly within a few minutes.
  • [Motor drive] The dual motor drive module can be applied to DC motors and 4-wire stepper motors, and can also be used to drive 2 DC gear motors.
  • [With H-bridge] TB6612FNG is an integrated H-bridge circuit based on MOSFET, and its efficiency is much higher than that of a transistor H-bridge driver.

8Pcs Capacitive Soil Moisture Sensor Module Corrosion Resistant 3.3V-5.5V Wide Voltage Wire Soil Humidity Detection 3-Pin Gravity Sensor Garden Watering DIY Module

  • This sensor is 3-pin "Gravity" interface, which can be directly connected to the Gravity I/O expansion shield.
  • Capacitive soil moisture sensor module is new version ,Operating Voltage: 3.3 ~ 5.5 VDC;Output Voltage: 0 ~ 3.0VDC
  • This analog capacitive soil moisture sensor measures soil moisture levels by capacitive sensing, rather than resistive sensing like other types of moisture sensor.

8PCS DC 12V Relay Module 1 Channel Relay Switch with Optocoupler Isolation High and Low Level Trigger Relay Control Red

  • The module can trigger high or low by jumper setting
  • This 1 channel relay module uses relay normally open interface, SMD optocoupler isolation, strong drive capability and stable performance
  • User-friendly interface design, all interfaces can be connected directly through the terminal leads, very convenient

Shutao FAQs