Semfeil Brew

4.3

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Semfeil Brew range from £17.15 to £45.28, and the average price of all the products is about £29.82. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Semfeil Brew has a relatively small number of products for sale, only 11. We analyzed all of them in detail and recommended them to our readers. If you find yourself hesitating about a purchase, check out our thorough Semfeil Brew review to see what the best picks are.

Semfeil Brew Best Sellers

Last Updated: 15 Jun 2023

304 Stainless Home Brew Beer Keg FermZilla Liquid Floating Dip Tube Filter Fit Ball Lock & Pin Lock corny Keg SS Ball Float 80CM Silicone Dip Tube

Buy on Amazon Find on eBay

5/16"Silicone Dip,you can connect your faucet/sampling valve or other devices.

[Floating Dip Tube Filter] For the beverage out，you'll have a silicone dip tube with stainless steel float, allowing you to always draw from the clearest beer at the top of the tank.

WIDE USE,if you want draw from the Liquid at the top of the tank

The silicone dip tube is 80CM long. It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to remove unwanted slack.

Made of 304SS This floating dip tube allowing you to draw the clearest beer first from the top of the beer kegs

Double Ball Lock stainless Mini Keg Dispenser Beer keg Dispenser Stainless Steel Mini Keg Beer Growler Spear Tap Dispenser Craft Beer Growler Homebrew with 12'' beer hose

Buy on Amazon Find on eBay

safety valve pressure up to 60PSI can make Nitrogen coffee

Use this dispenser turn your mini keg to conry keg and kegging beer

good finished Thread is not tied fit most stainless mini growler 2L 3.6L 4L 5L 8L 10L

International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Stainless Steel FermZilla Pressure Kit for 27L Fermzilla Suits Conical And All Rounder Model with 2pcs Carbonation cap for homebrew beer keg

Buy on Amazon Find on eBay

The silicone dip tube is 31" long.The dia of the Ball Float is 1.9". It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to remove unwanted slack.

For the beverage out, you'll have a silicone dip tube with stainless steel float, allowing you to always draw from the clearest beer at the top of the tank.

The pressure kit allows for fermenting under pressure, which will reduce esters and fusel alcohol production. This means you can ferment at warmer temperatures than you normally would, even making lagers at room temperature.

Keg beer that has already been carbonated . Use CO2 to push beer into a keg or through a filter into a keg

Carbonate and serve beer directly from the FermZilla, eliminating kegging all together.

Read more Read less

1/4" Plastic Hose Barb Beer line Quick Disconnect With Shut Off Beer Tubing and Gas line Check Valve Quick Connector In-Line Set Food Grade Homebrew Kegging

Buy on Amazon Find on eBay

Shutoffs(check valve) prevent leakage when disconnected.Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines.

This plastic quick disconnect set features 1/4" barb.

These couplings make it very easy to swap out couplers and other beer and air side accessories.

The temperature range is -40F to 180F.They can handle a vacuum to 60 psi - so you need not worry about them leaking gas.

Made of Food-grade plastic with stainless steel springs and NSF approved.

1.5"Tri Clamp (50.5mm OD) Cap with 1/2" NPT Thread Sanitary 304 Stainless Steel Homebrew Beer Hardware Fitting

Buy on Amazon Find on eBay

304 SS. We had these made for the thermocouple end of our RIMS tubes, but a secondary use we've come to appreciate is converting a chugger pump to have TC ports without exposing a bunch of threads to the liquid flow.

This is a 1-1/2" Triclover (TC) blank cap that has been meticulously drilled and tapped to NPT female thread to act as a very low profile adapter

Yes, you will have to use some teflon tape, but it's the best option short of solder or welding. If you do want to solder, this fitting also works well for that

Tri Clover fittings, also called sanitary fittings, are widely used in the commercial food processing industries.

For an installation to be truly considered sanitary, it most conform to the "3A" standard.

Read more Read less

304 Stainless Steel Sankey Keg Coupler Adapter G5/8 Thread Ball Lock Quick Disconnect Conversion Kit Gas & Liquid Posts For Home Brewing

Buy on Amazon Find on eBay

[Two Way to Identify Gas &Liquid Post] The Gas Post has a subtle etched line around the top of the base (the liquid post has no etched line).The flaring of the metal on the liquid side is much wider than the gas side

[Food Grade Material] Made of food grade 304 stainless steel instead of chrome plated , which let our keg coupler adapter kit more healthier/ environmental/anti-corrosion/no rust/durable. All of O-ring gasket is made of food grade silicone

[Quick & Easy To Convert] This Keg Coupler Adapter can combined with ball lock quick disconnect set that will convert the sanke style keg into a Cornelius style Ball Lock keg( easy to toggle between commercial and homebrew beers)

[Hand Or Plier To Install] Can install our ball lock keg conversion kit in 5/8 thread S-style &D-style keg coupler to use.You can use hand or the plier to lock each side grooves,then tighten the posts. Don't over tighten to avoid deforming the washer

[Easy To Clean ] To clean this keg coupler adapter kit , you can infuse the clear water into your beer keg to operate one time just like exporting beer.Don't suggest you take apart this conversion kit,cuz it is very difficult to reinstallation

Read more Read less

2PCS Female Flare (FFL) to Male Beer Thread Adapter Commercial SANKE to Homebrew Ball Lock

Buy on Amazon Find on eBay

You can connect a commercial beer nut to your ball lock or pin lock disconnect

This adapter is made from 304 stainless steel, one end is 1/4" FFL thread and the other end is male beer thread

You will be able to do this without cutting your lines and adding multiple fittings and clamps

No more cutting your lines to be able to serve corny kegs and Sankey kegs on the same system.

Semfeil Brew BlowTie Diaphragm Ball Lock beer Spunding Valve Complete Kit for Home Brewing beer corny beer keg

Buy on Amazon Find on eBay

[Release Pressure] Use spring and poppet,you can release excess pressure on a pressurized fermenter.

[Adjustable and Fixed Pressure] That means if the keg pressure is 40psi, then you want the Pressure Fermentation to 40 psi,then you can revolve the nut of Pressure Valve slowly to let Release Pressure,then fixed the nut，so the keg Pressure will be on 40 psi and Automatic pressure relief.

Spunding valve is easy to clean and adjust, the spunding valve also works great for controlling the flow rate when doing a closed beer transfer for fermenter to keg.

Release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers.

Kit Includes: BlowTie, Pressure Gauge, Ball Lock Disconnect, Duotight Tee & Flared Duotight Fitting, 2x Lengths of EVABarrier 8mm OD Tubing.

Read more Read less

Stainless Steel Bulkhead FPT 1/2" homebrew Weldless for beer kettle valve and Bi-metal Thermometer For Beer Keg Kettle Valve Beer Faucet tap Keg Fermenter

Buy on Amazon Find on eBay

1/2" Female threaded Weldless 304 Stainless Steel Bulkhead Fitting

Every piece in this set is made of solid 304 Ss construction

Easily attaches to any 1/2" NPT Ball Valve, Thermometer, Etc

Fits into 13/16" punch hole Easily installs onto your weldless brew kettle setup. Natural Silicon rings is fully heat resistant.

International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

TRUE Weldless 2" TC Tri clamp Bulkhead Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead

Buy on Amazon Find on eBay

These are extremely high quality pieces machined out of 304SS and polished to perfection (except for the locknut which is cast finish 304SS

The 2" Triclover (TC) weldless bulkhead flange allows you to add a TC port to any tank or kettle with absolutely no welding or soldering

The silicone O-ring is included and gets captured in a groove like our other True Bulkheads

The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.

Add a 2" TC flange to virtually any vessel!Just drill a 48MM hole and tighen the locknut with 2pcs Food grade gaskets.

Read more Read less

5pcs Floating Dip Tube Filter 50 Mesh 304 Stainless For FermZilla or Kegmenter

Lab Filters Inline Lab Filters

Buy on Amazon Find on eBay

This really handy little filter can be used on your silicone floating dip tubes to prevent hops or other solids getting sucked into the dip tube itself

How frustrating is hops getting blocked in your poppet, tap, ball valves and practically everywhere else

This 2" long filter can be boiled to sanitize, and the end cap removes for thorough cleaning

The 304 stainless 50 mesh is fine enough to filter out hops and many other solids but not so fine that it gets blocked up easily

If you have a FermZilla or stainless Kegmenter this add on extra is a must

Semfeil Brew FAQs

How much do Semfeil Brew products cost?

304 Stainless Home Brew Beer Keg FermZilla Liquid... is the top 1 product we recommend in the Semfeil Brew buying guide, which is priced at £22.9, you can view it on Amazon page.
Double Ball Lock stainless Mini Keg Dispenser Beer... is one of the popular products we recommend in the Semfeil Brew buying guide, which is priced at £45.28, you can view it on Amazon page.
1.5"Tri Clamp (50.5mm OD) Cap with 1/2" NPT Thread... is the cheapest product in the Semfeil Brew picks list, which is priced at £17.15, you can view it on Amazon page.
Double Ball Lock stainless Mini Keg Dispenser Beer... is the most expensive product in the Semfeil Brew picks list, which is priced at £45.28, you can view it on Amazon page.

What do customers think of Semfeil Brew?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Semfeil Brew is worth your consideration.

Who are the manufacturers of the Semfeil Brew products?

Most of the Semfeil Brew products are produced by SEMFEIL. The manufacturer provides Semfeil Brew with a steady supply of products, and they have a good cooperative relationship with each other.

Similar Brands