Skip to content
SPC Performance feature image

SPC Performance

4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the SPC Performance range from £35.59 to £997.63, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. On average, the SPC Performance products cost around £215.54. It is not a small expenditure for most consumers, so we recommend that you consider all aspects before making the purchasing decisions.

SPC Performance offers 56 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The SPC Performance review will examine the core factors of the brand and its products to help you make an informative buying decision.

Share

SPC Performance Best Sellers

Last Updated: 15 Jun 2023

Adjustable Upper Control Arms for Colorado (pair) - 86490

  • Get more droop travel: SPC's arm has improved clearance to get around the spring. With 80° of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC's arm gives you maximum droop travel.
  • Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms. Featuring an upgraded greaseable ball joint and rubber isolated xAxis bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.
  • Get your tire where you want it in the wheel well: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.

Adjustable Control Arms for C2/C3 Corvette (pair)

  • 1/2" extended ball joint for improved camber curve
  • Greaseable and rebuildable ball joint
  • Front Adjustment range: Camber ±3.0° Caster ±3.00; Installation time: .7 hr/side; Required: 1 kit per axle

SPC Performance 28850 Mercedes C Class Rear Camber Kit

  • Years of research and development have led to vehicle specific valuing that is optimally tuned for use on lifted or leveled Jeeps using larger, heavier wheels and tires
  • Have a long history of excellent on and off road performance and have been tested
  • It is manufactured in United States

Jeep JK Rear Lower Control Arm w/xAxis - 13425

  • We are proud to be registered as an IATF 16949 company, the international automotive quality standard that is based on the popular ISO 9001 standard used by most industries around the world.
  • Since 1975 Specialty Products Company has been designing, testing and manufacturing world class alignment and suspension solutions.
  • With world class customer service and tech support, along with advanced design and quality manufacturing, Specialty Products is your "Pro Alignment Team".

SPC 15740 Xaxis Rod End Ball Joint

  • We are proud to be registered as an IATF 16949 company, the international automotive quality standard that is based on the popular ISO 9001 standard used by most industries around the world.
  • Since 1975 Specialty Products Company has been designing, testing and manufacturing world class alignment and suspension solutions.
  • With world class customer service and tech support, along with advanced design and quality manufacturing, Specialty Products is your "Pro Alignment Team".

FORGED RECEIVER - XAXIS JOINT - LH 3/4"-16 X 14MM BH X 2.375"W

  • Highly polished electroless-nickel finish on ball maximizes durability
  • Sealed joint retains grease and excludes contaminants
  • Up to 45 degree total angularity for high mis-alignment requirements

SPC Performance Cam Front Camber/Caster Kit for 09-14 FORD F-150 4wd Raptor

  • Part Number: 86252
  • SPC Performance Cam Front Camber / Caster Kit for 09-14 FORD F-150 4wd Raptor

FORGED RECEIVER - XAXIS JOINT - LH 3/4"-16 X 12MM BH X 2" W

  • Highly polished electroless-nickel finish on ball maximizes durability
  • Sealed joint retains grease and excludes contaminants
  • Up to 45 degree total angularity for high mis-alignment requirements

FORGED RECEIVER - XAXIS JOINT - LH 3/4"-16 X 10MM BH X 2" W

  • Highly polished electroless-nickel finish on ball maximizes durability
  • Sealed joint retains grease and excludes contaminants
  • Up to 45 degree total angularity for high mis-alignment requirements

SPC 15643 X-Axis Sealed Flex Joint

  • We are proud to be registered as an IATF 16949 company, the international automotive quality standard that is based on the popular ISO 9001 standard used by most industries around the world.
  • Since 1975 Specialty Products Company has been designing, testing and manufacturing world class alignment and suspension solutions.
  • With world class customer service and tech support, along with advanced design and quality manufacturing, Specialty Products is your "Pro Alignment Team".

SPC 15623 X-Axis Sealed Flex Joint

  • We are proud to be registered as an IATF 16949 company, the international automotive quality standard that is based on the popular ISO 9001 standard used by most industries around the world.
  • Since 1975 Specialty Products Company has been designing, testing and manufacturing world class alignment and suspension solutions.
  • With world class customer service and tech support, along with advanced design and quality manufacturing, Specialty Products is your "Pro Alignment Team".

SPC 15617 X-Axis Sealed Flex Joint

  • We are proud to be registered as an IATF 16949 company, the international automotive quality standard that is based on the popular ISO 9001 standard used by most industries around the world.
  • Since 1975 Specialty Products Company has been designing, testing and manufacturing world class alignment and suspension solutions.
  • With world class customer service and tech support, along with advanced design and quality manufacturing, Specialty Products is your "Pro Alignment Team".

X-AXIS BALLJOINT 15605 - .375" (Bolt Size) X 1.5" (Width) X 1.25" (Outer Dia.)

  • Highly polished electroless-nickel finish on ball maximizes durability
  • Sealed joint retains grease and excludes contaminants
  • Up to 45 degree total angularity for high mis-alignment requirements

SPC Performance 67466 Control Arm

  • The Package Width of the Product is 5.5 inches
  • The Package Length of the Product is 15.0 inches
  • The Package Height of the Product is 6.5 inches

SPC Performance FAQs