DUBEUYEW feature image

DUBEUYEW

Review rating Review rating Review rating Review rating Review rating 4.8

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the DUBEUYEW range from £5.99 to £18.99, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. DUBEUYEW provides their products for a reasonable price, which means the products cost around £10.8 on average. They are affordable options to make your shopping much easier.

DUBEUYEW has a relatively small number of products for sale, only 25. We analyzed some of them in detail and recommended them to our readers. The DUBEUYEW review aims to sharpen your understanding of the brand and introduces you to their bestselling products. Just keep reading!

DUBEUYEW Best Sellers

Last Updated: 15 Jun 2023

DUBEUYEW development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip 2102 38 pins for ESP32 for Arduino(38PIN, 2PCS)

The module has 38 pins,Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the Arduino IDE.
ESP32 is a safe, reliable, and scalable to a variety of applications. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
The user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.
Support Lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.

DUBEUYEW SP-COW ESP32 ESP-32S NodeMCU-32S ESP-WROOM-32 Development Board 2.4 GHz WiFi and Bluetooth Dual Cores Microcontroller ESP-WROOM-32 Chip for Arduino NodeMCU (2 Pcs)

The module has 38 pins andPowerful, small volume. Support LWIP protocol, Freertos.
2.4 GHz dual-mode Wifi and Bluetooth development with 4 MB of flash.
The 2.4 GHz Wifi and Bluetooth dual-mode chip adopts low-power 40nm technology, which has the best power consumption and RF performance, safe and reliable, and easy to expand to various applications.
Support three modes: AP, STA, AP+STA coexistence mode.
Compatible with Arduino, Nodemcu, and MicroPython, can be programmed with for the Arduino IDE and Lua, can fit on a solderless breadboard, makes your development easier.

SP-COW 2pcs Nano Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P

[Finished Product] These boards are fully assembled. No soldering required. Size is about 2.21" x 1.65" x 0.50" (L* W* H)
[Designed for Arduino Nano ] The item is a terminal expansion adapter, working very well for prototyping Arduino Nano projects
[Nice Platform for Wiring Circuits] It provided a nice platform for wiring circuits to Arduino Nano.It can connect a large number of digital lines to Arduino while maintaining the footprint of the original Nano
[Little Tips] It lables for 3.0 version , however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). Any questions, you can contact me by email at any time
[Easy to Use] You can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard

DUBEUYEW ESP32 ESP-WROOM-32 WLAN Upgrade mini WiFi + Bluetooth IoT Development Board 5V Compatible for Arduino (1pcs)

MH-ET LIVE mini ESP32 ESP-32 WiFi+Bluetooth Interne
Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality, and with its higher performance, a wider range of applications.
Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible with Arduino.
All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO
100% compatible with Arudino IDE, Lua and Micropython, it shows robustness, versatility, and reliability in a wide variety of applications and power scenarios.

SP-COW Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Dual-core ARM Cortex M0+ Processor Running up to 133 MHz, Support C/C++/Python (2pcs)

[Multiple Software Support] Pico has rich and complete software support, it comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.
[Low-Cost&High-Performance] Raspberry Pi Pico incorporates Raspberry Pi's own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory
[Rich Hardware Interface] Raspberry Pi Pico has 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.
[Custom Peripheral Support] 8 × Programmable I/O (PIO) state machines for custom peripheral support
[Build Project in Tiny Size] Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1" pin-headers or can be used as a surface-mountable 'module'.

DUBEUYEW SP-COW ESP32S Breakout Board GPIO 1 into 2 for 30PIN Version ESP32 ESP-WROOM-32 Microcontroller Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1(2Pcs)

GPIO 1 INTO 2: The esp32 breakout board can expand one GPIO pin of esp32 development board to two.Convenient to reuse all pins in smart home DIY projects. Great breadboard alternative.
IMPORTANT: only compatible with esp32 development board version and with 30-pin mounting hole, asin ref: B07VJ34N2Q B08CCYWZN3 B07XH45MWW. Does not apply to other versions. You can enter this code to find the product directly on the amazon homepage, otherwise it is easy to buy the different size product don't match the one you have.
UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
SAFE, RELIABLE:The expansion board is design with double-layer that One pin is wired on both sides. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.
2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.

DUBEUYEW SP-COW ESP32 Breakout Board Expanding Board for 30PIN ESP32 ESP-WROOM-32 Microcontroller Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1(2pcs)

[EASY TO USE] This ESP32‑IO development board is easy to use, and developers can connect peripherals based on their needs.
[IMPORTANT] Only compatible with 30 pins and double Mounting Version esp32 development board, ref asin: B07VJ34N2Q B08CCYWZN3 . Not applicable to other versions.
[WITH STANDARD HEARDERS] When using this ESP32‑IO development board for development and debugging, the standard headers on both sides can make your operation more concise and convenient.
[WIDE APPLICATIONS] This ESP32‑IO development board has a wide range of applications that can be applied to the operation, learning and development of college students, engineers, technicians, factory workers, DIY, electronic enthusiasts
[PREMIUM PCB MATERIAL MADE] This ESP32‑IO development board is made of high quality material of PCB, which makes it have high reliability and long service life.

DUBEUYEW LM2596 DC-DC Buck Converter, Adjustable Step Down Voltage Regulator 3-40V to 1.5-35V High Efficiency Power Supply Volt Reducer Transformer Module(4PCS)

The output voltage: DC 1.5 - 35 V adjustable.
The input voltage: DC 3 -40 V (Input voltage must be 1.5 V higher than the output voltage, no boost.
The output current: It is recommended to use under 2A, maximum 3A(Additional heatsink is required).
Steps for usage: 1. Plugged into a power supply (3-40v), the power indicator light is lit, the module to work properly. 2. Adjust the blue potentiometer knob (generally booster clockwise, counterclockwise step-down) with a multimeter monitoring the output voltage to the voltage.
Package includes:4XLM2596 DC-DC buck converter module(Note:The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)

DUBEUYEW ESP32S Breakout Board GPIO 1 into 2 for 38PIN Narrow Version ESP32 ESP-WROOM-32 Microcontroller Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1(2 Pcs)

GPIO 1 INTO 2: The esp32 breakout board can expand one GPIO pin of esp32 development board to two.Convenient to reuse all pins in smart home DIY projects. Great breadboard alternative.
IMPORTANT: Only compatible with 38 pins Narrow and No Mounting Hole Version esp32 development board, ref asin: B0BJPZ7G6D. Not applicable to other versions.
UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
SAFE, RELIABLE:The expansion board is design with double-layer that One pin is wired on both sides. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.
2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.

DUBEUYEW Mini DC-DC Buck Converter Adjustable Power Supply Module 24V to 12V 9V 5V 3V (6 PCS)

[Operating data]Input voltage: 4.5V to 28V; Output voltage: 0.8V to 20V adjustable, Output current: 3A to 2.5A, Conversion Efficiency: 92% Max;Output ripple: Less than 30mV, Switching Frequency: 1.5MHz Max, 1MHz TYP.
[step down module]Mini DC-DC buck adjustable step down module.
[Warning] do not reverse the positive and negative terminals to avoid any possible damage; Do not use light load (less than 10% of output power) or without load.
[Small size]just like the size of a coin, but it's only 2g, much lighter than the coin. Size: 22 mm by 17 mm by 4 mm.
[After Service] If there is any question in using our product, please contact us in time. We will spare no efforts to help you.

DUBEUYEW 6Pcs HX711 Weight Pressure Sensor Module 24-bit Precision AD Module Dual-channel Load Cell Compatible with Arduino DIY

It has two analog channel inputs and an integrated 128-times gain programmable amplifier.
This module uses a 24-bit high-precision A/D converter chip hx711. It is designed for high-precision electronic scales.
The input circuit can be configured to provide bridge-bridged (eg, pressure, weighing) sensor modes, making it an ideal high-precision, low-cost sampling front-end module.
Power consumption (including regulated power supply circuit): Typical operating current: 1.7mA, power-off current: 1μA.
Operating voltage range: 2.6 5.5V; Operating temperature range: -20 +85 °C; 16-pin SOP-16 seal.

DUBEUYEW ESP8266 NodeMCU 340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython New Version(2pcs)

Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.
Nodemcu v3, Upgraded to 340 chip; Power your development in the fastest way combinating with NodeMcu Firmware; It's a IOT unit with all available resources on board, support smart link and smart networking.
ESP8266 is a highly integrated chip designed for the needs of a new connected world.It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
Compatible with Arduino compatible, Available install NodeMCU 1.0 library in the Arduino IDE. This ESP8266 NodeMcu development board can be use for small temperature and humidity monitor in home automati.

DUBEUYEW Raspberry Pi Pico Breakout Board GPIO 1 into 2 for Flexible Microcontroller Board Based on The Raspberry Pi Dual-core ARM Cortex M0+ Processor Running up to 133 MHz(2pcs)

GPIO 1 INTO 2: The Raspberry Pi Pico breakout board can expand one GPIO pin of Raspberry Pi Pico development board to two.Convenient to reuse all pins in smart home DIY projects. Great breadboard alternative.
Important: unique compatible with the Raspberry Pi Pico, ref asin: B0B7JP6VHR.
UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
SAFE, RELIABLE:The expansion board is design with double-layer that One pin is wired on both sides. Stable and highly reliable.Great contact and stable signal transmission for your Raspberry Pi Pico board
2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.

DUBEUYEW 6 Pcs ESP8266 ESP-12F Mini Modules 4M Bytes WLAN WiFi Internet Development Board for Arduino, WeMos ESP8266 Mini

ESP8266 Mini 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos ESP8266 Mini.
This is ESP8266 mini, it is a mini WiFi board based on ESP-8266EX.
WIFI development board,4M bytes.5V 1A switching power supply (switching power supply)onboard.
Our ESP8266 mini development board compatible with Arduino WeMos and can be programmed in the for Arduino IDE.
11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0); 1 analog input(3.2V max input). Micro USB connection; Compatible with Arduino; 1MB Flash; 500mA resettable fuse.

DUBEUYEW 4pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

AT Command Setting:HC-05 Module Setting by AT Command,Default Baud Rate: 9600;Default Password: 1234; Default Name: HC-05;Press the Button and Power On the Module to Enter the AT Mode. AT Commands are Executed Only in AT Mode, Easy to Use.
HC 05 Bluetooth Module:Input Voltage: 3.6V-6V ( Prohibit more than 7V);Working Voltage: 3.3V On-Board 3.3V Voltage Regulator Chip, When Not Paired, Current about 30mA (due to LED Lights Flashing, Current in the State of Change); After the Pairing Succeeds, the Current is about 10mA.
Working Status Indicator: HC-05 Module come with Connection Status Indicator,Fast Flashing LED Means No Bluetooth Connection, Slow Flashing Means Entering AT Mode, Double Flashing Means Bluetooth is Connected and the Port is Opened.
HC-05 Wireless Module:HC 05 Bluetooth Module,Which Can Help to Add the Bluetooth Feature to your Arduino Project Easily ,Then You Can Use Your Android Phone to Control Some Gadgets Such As: Switches, LED,etc.(NOTE:HC-05 Module Doesn't Works With iOS)
Customer Service: If there is any question in our product, please contact us freely, we will spare no efforts to provide help for you.

DUBEUYEW ESP32S Breakout Board GPIO 1 into 2 for 38PIN Wide Version ESP32 ESP-WROOM-32 Microcontroller Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1(2 Pcs)

GPIO 1 INTO 2: The esp32 breakout board can expand one GPIO pin of esp32 development board to two.Convenient to reuse all pins in smart home DIY projects. Great breadboard alternative.
IMPORTANT: Only compatible with 38 pins wide and Mounting Hole Version esp32 development board, ref asin: B0B4DCTZ6V. Not applicable to other versions.
UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
SAFE, RELIABLE:The expansion board is design with double-layer that One pin is wired on both sides. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.
2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.

DUBEUYEW ESP8266 Development Board WiFi WLAN Wireless Module ESP-12E for NodeMCU for Arduino (2pc)

The development board has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board. Support smart link smart networking.
The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation.
The fast and affordable technology for WiFi. Make your development the fastest way combined with firmware for NodeMcu.
Modern, state-of-the-art LUA technology. It is an integrated unit with all available resources on board. It's very easy for Arduino projects or any development board with I / O pins.
Modern Internet development tools can use the built-in API to instantly put your idea on the fast track.

SP-COW 51 AVR USB ISP ASP Microcontroller Programmer Downloader with Cable + 10Pin to 6Pin (3pcs)

[ATMEL standard port] :The output port is an ATMEL standard port. With overcurrent protection.With power and write indicator lamp.power and target board support target voltage 5V,3.3V, can choose by jumper cap connection.Automatic Speed Regulation.
[ATMega8A-AU] :Support AVR and ASP chip.Support AT89S51/52 microcontroller.
[programming interface] :Reserved programming interface, the user can upgrade the download firmware.
[USB interface] : Applicable to WIN8.1 / 8/7 / XP 32-bit / 64-bit computer. It can be directly connected to the USB interface of the computer, which is very convenient to use. (Please note: this product is not suitable for WIN10)
[10PIN to 6PIN Converter] : Equipped with standard ATMEL ISP10 to ISP6 port converter.

DUBEUYEW 2596S with LED Display Voltmeter Buck Converter DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable Board Step Down Module Power Supply Module (2pcs)

[Input Voltage] DC 4V to 40V (input voltage must be 1.5V higher than the output voltage, no boost).
[High Precision] The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
[Output Voltage] DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A.
[Mini Size] 57*36*13 mm (with potentiometer). 2pcs included.
[Easy to DIY] Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V)

DUBEUYEW FAQs

You can purchase DUBEUYEW products from the seller Sp-Cow, over the last 12 months, the seller has received honest feedback from 38 consumers, and the average rating is 4.83. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and DUBEUYEW is worth your consideration.