Elechawk feature image

Elechawk

Review rating Review rating Review rating Review rating Review rating 5.0

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Elechawk range from £5.99 to £17.99, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. Elechawk provides their products for a reasonable price, which means the products cost around £9.93 on average. They are affordable options to make your shopping much easier.

Elechawk has a relatively small number of products for sale, only 39. We analyzed some of them in detail and recommended them to our readers. This Elechawk review will give you insight into the products they offer so you can make a better informed decision before you make your purchase.

Elechawk Best Sellers

Last Updated: 15 Jun 2023

PH 2.0 Connector Pre-Crimped Cable Kit Compatible with JST-PH2.0mm for Battery JJRC H36 Blade Inductrix Tiny Whoop Arduino mkr1010 MKR Zero and MKR Vidor 4000 (Female&Male Connector&Wire)

Widely used for circuit boards, Lipo battery, balance lead, circuit boards, speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers, electronic toys.
This kit includes female and male PH2.0mm 2/3/4/5/6 pin connector, 90pcs pre-crimped wire, Heat shrinkable tube and 1pcs tweezers. It is Perfectly Compatible with JST-PH2.0 connector
This set of connectors is easy to assemble, no crimping tool needed, just plug the pin to the housing
The pre-crimped cable is 22AWG soft silicone wire and 13cm(5.2inch) length.
Suitable for Arduino mkr1010, MKR ZERO and MKR VIDOR 4000 lipo socket and tiny drone, tiny whoop, JRC H36 H67 Upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone

elechawk I2C Qwiic Cable Kit Stemma QT Wire for SparkFun Development Boards Sensor Board Breakout Breadboard 4 Pin Sh1.0 Connector

Each Qwiic Cable's wires have been color coded to red, black, blue and yellow
Includes 12 pcs cables of various lengths and styles (10cm,20cm, 30cm, 50cm. SH1.0 connector and breadboard Jumper and Female Jumper)
Uses this cable to quickly hook up sparkfun and development boards with sensors, LCDs, relays and more.
The female and male dupont connector also suitable for raspberry pi and Arduino development boards

10pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix Eachine E010 E013

Upgrade JST-PH 2.0 connector, the pins will not loose easily
This is the male and female connector cable,
Suitable for tiny whoop like JRC H36 H67 Upgrading Blade Inductrix, Eachine E010 E013, and KingKong Tiny drone
Must have for HV batteries and high performance
80mm length/per unit. 22AWG soft silicone wire

5 Pairs JST-XH 2.54mm 1S 2 Pin Balance Plug Lead Socket Male and Female Connector with 10cm Silicone Wire Cables

JST-XH connector and socket are suitable as a power line for your project like Arduino
Included: 5 PCS female cables, 5 PCS male cables, 5 PCS sockets
The Silicone wire is very soft
22AWG cable can work with enough current

40 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit Compatible JST SYP Futaba for Hitec Spektrum RC

The black connector compatible with Futaba and JR connectors. Ideal for servo extensions DIY, repairing servo connectors. The red connector compatible with JST SYP connectors. Ideal for power cable.
Includes 20 sets servo male, 20 sets female connector, 20 sets red male SYP 20, sets female SYP connector, 3 meters long 22AWG cables, and a tweezers in one box. Easy to store
The servo connector is 2.54mm pin spacing and the red connector is 2.5mm pin spacing
The cable is 3 meters long 3P wires, and 22AWG. The conduct is made of multi-core tined copper, which is strong and can endure enough current
Each set includes connector housing, protective connector housing and crimp pin connector.

2.54mm XH Connector Socket Kit With pre-crimped cable wire 2/3/4/5/6/7 Pin Housing JST Adapter Cable Male and Female Compatible with JST-XH Connector (Connector&Socket)

Widely used for Lipo battery balance lead, 3D printer, Woodland Just Plug Lights, circuit boards, speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers, electronic toys.
This kit includes XH2.54mm(0.1 inch) 2/3/4/5/6/7 pin connector and socket, 90pcs pre-crimped wire, heat shrinkable tube and 1pcs tweezers. It is Perfectly Compatible with JST-XH2.54mm and XH2.5mm connector and socket
This set of connectors is easy to assemble, no crimping tool needed, just plug the pin to the housing
The pre-crimped cable is 22AWG soft silicone wire.

RC Remote Controlled AUX on/Off Electronic Switch Relay for Car Truck Boat LED Light Drone (4A)

Easily turn on or off lights, smoke system, bomb drops, plane canopies from your remote controller or transmitter
Package include a RC switch and a JST to futaba/JR adapter. This RC switch can be connected to receiver AUX channel or other desire channel. Toggle the related switch on the transmitter, this RC switch will close or open.
Super simple install, just plugs with the item you would like to control, no setup required. Just make sure in your radio the throw for the channel you would like to control is set to +/- 100%
Suitable for RC cars, trucks, planes, helicopter, quadcopter and drones
Input Voltage (DC):3.7-15V. load current (DC):4A (Continuous current)

3 Pairs T Plug Connector Female and Male Deans with 12AWG Silicon Wire for RC Lipo Battery Cable Drone

Good soldering quality. Copper contact. Low resistance
Include 3 PCS female T plug cable and 3PCS male T plug cable
Used for RC car, quadcopter and boat battery connection
Rates up to 55A continuous. Provides solid and reliable connection
Conductor Material: 12AWG Tin-plated copper

1.25mm Male and Female Connectors Socket and Plug with Pre-Crimped Cables Compatible with Molex PicoBlade for Pixhawk Silicone 13cm Wire (Male and Female)

Ideal for signal and wire-to-wire applications. You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually.
Include 1.25mm pitch connectors (2P, 3P, 4P, 5P, 6P male and female), 15cm Pre-crimped 1.25 to 1.25 Cables * 180pcs (6 colors, each color 30 cables), Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc..
Ultra soft silicone wire, still has very good flexibility at low temperature.
Suitable for the new version of Pixhawk and APM2.8, APM2.6 flight controller and Runcam camera and Video transmiters

JST-XH 3S Balance Plug Extension Lead Wire 200mm 5 PCS for LiPo Battery Balance Charging 22AWG Silicone

200mm length, 22AWG soft silicone wire can endure enough current
Included 5 PCS of 3S Extension Lead
Usefull for DIY special 3s lithium battery or lipo battery
Separate insulation effectively prevents short-circuit between pins
JST-XH connector - the most common style lipo balance plug

5 Pcs JR/Spektrum/Hitec/Futaba Style Servo Y Harness Leads Splitter Cable For RC Models Airplane 7cm

Y Servo Leads are durable, soft and light
Includes 5 pieces of cables.
Work with RC Cars, Planes, Helicopters, & Drones. It can be used to control 2 servos at the same time.
Servo Plug Type: Futaba compatible with JR / Spektrum / Hitec
10cm lenght.

6PCS JST Plug Splitter JST Male Female Y Cable JST Y Parallel Adapter Harness JST to JR Adapter for Traxxas TRX-4 RC Car Crawler Truck Cooling Fan ESC Battery Motor

They are special for Traxxxas car truck crawler and HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car, mini RC helicopter and indoor 3D plane, great for small Lipo and NiMH connection.
Package includes 6PCS Cable. 1PCS Male JST to Female JR (Futaba) Cable, 1PCS Female JST to Male JR Cable,1 Male to 2 Female Y Harness, 1 Male to 3 Female Y Harness, 1 Female to 2 Female Y Harness, 1 Female to 3 Female Y Harness.
The Male to Female Y Harness can be used to power 2 cooling fans, Plug the JST male connector on your receiver, then you can connect the 2 cooling fans on the JST Female connector, also can run other parts which are in JST male plug, such as lights, winch.
The Female to Female Y Harness are used for TRX-4 ESC, it allows to be powered by TRX-4 ESC and run the lights, winch, cooling fan at the same time.
Cable length: 15cm/5.9inch for splitter cable, 10cm/3.9inch for JST to JR cable

7 Pin JST-XH 6S Balance Plug Extension Lead Wire 200mm 5 PCS for LiPo Battery Balance Charging 22AWG Silicone (6S)

200mm length, 22AWG soft silicone wire can endure enough current
Included 5 PCS of 6S Extension Lead
Usefull for DIY special 6s lithium battery or lipo battery
Separate insulation effectively prevents short-circuit between pins
JST-XH connector - the most common style lipo balance plug

elechawk 3 Pairs XT60 Plug female and male Connector with 12AWG Silicon Wire for RC Lipo battery Cable Drone

Good soldering quality. Copper contact. Low resistance
Include 3 PCS XT60 female cable and 3PCS XT60 male cable
Used for RC car, quadcopter and boat battery connection
Rates up to 55A continuous. Provides solid and reliable connection
Conductor Material: 12AWG Tin-plated copper

JST-XH 2S Balance Plug Extension Lead Wire 200mm 5 PCS for LiPo Battery Balance Charging 22AWG Silicone

200mm length, 22AWG soft silicone wire can endure enough current
Included 5 PCS of 2S Extension Lead
Usefull for DIY special 4s lithium battery or lipo battery
Separate insulation effectively prevents short-circuit between pins
JST-XH connector - the most common style lipo balance plug

Pre-Crimped Cables and SH1.0 Connectors for SPRacingF3 OMNIBUS F4 Pro F7 Racing drone Silicone 15cm Wire

You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
Included 15cm Pre-crimped SH1.0 to SH1.0 Cables * 240pcs ( 6 colors, each color 40 cables) 3P*20pcs 4P*20pcs 5P*20pcs 6P*20pcs 7P*20pcs 8P*10pcs 9P*10pcs 10P*10pcs 12P*10pcs Diameter 1 mm Heat shrinkable tube * 100pcs Tweezer * 1pcs
You can achieve connection between flight controller and camera, VTX, GPS, Telemetry module, Bluetooth module, OSD, or ultrasonic sensor etc.
Ultra soft silicone wire, still has very good flexibility at low temperature.
Suitable for Racing Drone like SPRacingF3, OMNIBUS F4 Pro, F7 etc. flight controller

JST-XH 4S Balance Plug Extension Lead Wire 200mm 5 PCS for LiPo Battery Balance Charging 22AWG Silicone

200mm length, 22AWG soft silicone wire can endure enough current
Included 5 PCS of 4S Extension Lead
Usefull for DIY special 4s lithium battery or lipo battery
Separate insulation effectively prevents short-circuit between pins
JST-XH connector - the most common style lipo balance plug

elechawk LED Light Strip for RC Fixed Wing Airplane Flying Wing Plane AR Wing Drone Model Car Truck (Ice Blue)

Suitable for fixed-wing like AR Wing, Skyhunter, ZOHD Talon etc..
Package Include 2 LED strips, Y-cable
The LED strip is super brightness and light. 0.5m length LED strip is almost suitable for all size of fixed wing.
Rating voltage: 4-6V
As underbody light suitable for Drift Car, Model Truck and Crawler Car

Elechawk FAQs

You can purchase Elechawk products from the seller elechawk, over the last 12 months, the seller has received honest feedback from 6 consumers, and the average rating is 5. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Elechawk is worth your consideration.

Most of the Elechawk products are produced by YUYING. The manufacturer provides Elechawk with a steady supply of products, and they have a good cooperative relationship with each other.