Skip to content
DAOKAI feature image

DAOKAI

4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the DAOKAI range from £2.59 to £16.99, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. DAOKAI provides their products for a reasonable price, which means the products cost around £6.83 on average. They are affordable options to make your shopping much easier.

DAOKAI offers 183 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. This DAOKAI review will give you insight into the products they offer so you can make a better informed decision before you make your purchase.

Share

DAOKAI Best Sellers

Last Updated: 15 Jun 2023

DAOKAI 10pcs PC Motherboard Buzzer Internal Speaker Computer Case DIY BIOS Beep Alarm Buzzer with Power Cable On And Off Push Button

  • [Function]These speakers are used to obtain beep codes from motherboards, alarm systems and other electronics. Keep your computer case internal cable tidy
  • [Cable] Cable length: about 6cm / 2.36inches, the red wire is the positive pole, and the black wire is the negative pole. Used to connect to the Speaker port on the front panel of the motherboard
  • [Scope of use] After the computer is turned on, we will all hear the familiar sound "Du", which generally means that the computer can be used normally

DAOKAI 10 Pcs 3.5mm Stereo Jack Panel Mount Nickel Plated Female Audio Connector PJ-392 Audio Socket for Headphone/Audio/Video with 3.5mm TRS Male Plug

  • [Material] Made of high quality plastic and nickel plated metal, anti-corrosion and wear resistant, more durable for use.
  • [Specification] Rated Load: DC 30V 0.5A; Contact Resistance: ≤0.03Ω; Insulation Resistance: ≥100MΩ; Withstand Voltage: AC500V(50Hz)/min
  • [Pin Definition] PIN 1- Ground; PIN2- Right Audio Channel; PIN3- Left Audio Channel

DAOKAI 20 Gauge Silicone Wire 600V 20 AWG Stranded Tinned Coated Copper Wires 3 Color (Black, Red, Yellow) 7m/23ft Each Electrical Cable Hook Up Wire Kit for 3D Printer, Model Car

  • [Material] Tinned copper stranded wire with silicone insulation, Which provides high flexibility, resistance to water, oil, solvents, and other chemicals.
  • [Specification] Gauage: 20 AWG; Color:Black, Red, Yellow; Wire Length:7m/23ft per roll; Voltage Rating: 600 Volts; Rated Temperature: -60℃~+200℃
  • [Tinned Coated Copper Wire] 0.08mm Tinned Coated can maintain copper wire for a long time does not oxidize and anti-corrosion, easy for soldering.

DAOKAI DAOKAI 10Pcs DS18B20 Temperature Sensor 3-5.5V Programmable Digital Temperature Sensor Temperature Acquisition for Arduino with 4.7K Ohm Resistor

  • [Resolution] User can choose temperature resolution from 9 to 12 bits, with 12 bits output resolution, DS18B20 sensor provides accurate temperature readings.
  • [Specification]Supply voltage: 3.3 -5V, Temperature range: -55 ° C - 125 ° C, Tolerance +/- 0.5 ° C at -10 ° - + 85 ° C, Output: Digital / Resolution: 12 bits
  • [Wide range of applications]Applied to Thermostatic Controls, Industrial Systems, Consumer Products, Thermometers, and other Thermally Sensitive System.

DAOKAI 4 Bits Digital Electronic Clock DIY Kits MCU digital clock PCB Soldering Practice Board Clock Parts Components for Curriculum Practice Welding Practice

  • [Function] With clock, time setting, alarm setting, countdown, stopwatch, counter, hourly timekeeping, precise time display, 24-hour system and other functions.At the same time it can help you learn more about electronics expertise.
  • [Product]4 Bits Digital Electronic Clock DIY Kits, Supply voltage: 3V-6V, High quality PCB board,the connection that was clearly mapped and labeled on the board makes it easy to assemble.
  • [Special reminder]If you use it for a long time, it is recommended to use a DC power supply, because if you use ordinary 3 AA batteries, the power consumption will be faster, and it is not suitable for long-term use.

DAOKAI 3PCS XL6019 5A High Power Current Adjustable Power Boost Buck Voltage Regulator Module, DC - DC Step-up 5V 6V 12V 24V 3-35V to 5-40V Converter, with 24AWG Cable

  • [Adjustment Button]Adjust the blue knob of the potentiometer(counterclockwise general impulse, buck clockwise rotation) and with a multimeter to monitor the output voltage reaches the required voltage, Output voltage is adjustable, supports up to 40V
  • [Parameters]XL6019 Module Input Voltage: DC 3-35 V(40V MAX), Output Voltage: DC 5-40V ( 45V MAX Adjustable), Input Current: 5A (MAX),Voltage regulation: ± 0.5%, Load regulation: ± 0.5%, Switching frequency 220KH
  • [Package Included]You will get 3 x XL6019 5A High Power Current Module, 1 x 50CM Ultra Flexiable Cable 24AWG

DAOKAI L9110S DC Stepper Motor Module, 5Pcs Dual-Channel H-bridge DC Stepper Driver Board 2.5-12V Motor Driver Controller Module LED Lights for Arduino Stepper Motor Smart Car

  • [Small and compact]PCB board size: 28x21mm/1.10x0.83in, ultra-small size, suitable for assembly. With fixed mounting holes, diameter: 3mm/0.12in.
  • [Specification] Power supply voltage: DC2.5-12V, With high current driving capability, each channel can pass 800mA continuous current, and the peak current capability can reach 1.5A.
  • [Safe to use] Motor driver with dual L9110S chips. The built-in clamping diode of the L9110S chip can release the reverse impulse current of the inductive load, making it safe and reliable in the use of driving relays, DC motors, stepping motors or switching power tubes

DAOKAI GT2 Closed Loop Timing Belt 6mm Wide Loop Rubber 110mm 112mm 122mm 158mm 200mm 300mm 400mm 610mm + GT2 Timing Belt Pulley(20 Teeth Bore) for 3D Printer

  • [High Quality] Premium fiber reinforeced rubber, durable and flexible, wear resistant for long-term use. The product designed with smooth transmission, a buffer, damping capacity, low noise.
  • [2GT Timing Belt] 2GT system is an extension of the HTD system with greater load carrying capacity. Circular arc tooth profile tooth space is small, suitable for straight line driving.
  • [Widely Applicable] Wide rubber timing belt and pulley are suitable for 3D printer, dishwashers, packaging machinery, dryer, food machinery, ect.

DAOKAI Soldering Mat Electronics Repair Mat Silicone Mat 932°F (30cm x 20cm / 11.8" x 7.8") Heat Resistant Mat for Phone, Solder Station with Anti-static Wrist, Grounding Cable

  • [Heat Resistant] Soldering station mat can resist the temperature as high as 932°F (500℃), fireproof and is anti-corrosive also, it supports high temperature soldering work directly, and can protect your platform from burning and ruining
  • [Material] silicone mat is made of high quality silicone, anti-scratch and non be out of shape, soldering repair mat both suface are adopting the anti-slip design, it won't slide around on your desk or work station
  • [Package Conten] The package comes with 1 x Soldering Mat, 1 x Grounding Cable, 1 x Anti-static Wrist

DAOKAI 10PCS Dual High-Power 400W MOS Tube Trigger Switch Driver Module FET PWM Adjustment Electronic Switch Control Board for Brightness Control

  • [Parameters]Operating Voltage: DC DC 5V--36V; continuous current 15A at normal temperature; power: 400W; The maximum current can reach 30A under auxiliary cooling conditions
  • [Product description]This product uses dual MOS parallel active output, lower internal resistance, larger current, strong power, 15A, 400W at room temperature, which meets the use of most equipment
  • [Trigger signal source]Digital high and low level (DC3.3V--20V), can be connected to single-chip IO port, PLC interface, DC power supply, etc., can be connected to PWM signal, signal frequency 0--20KHZ support

DAOKAI 30Pcs DC-022 DC Round Power Jack Socket 3 Pin Female Panel Nut Mount Connector 5.5 x 2.1mm Plug-in Port with screw ring, DC Male Plug, Waterproof Cover Cap

  • [Parameters]Rated load: Dc 30V 0.5A, Contact resistance: 100WΩ DC250V, Withstand voltage: AC 500V (50HZ)/MLN
  • [Product name]: DC Power Jack Socket, with Hex Nut, 3 pin solder Terminals
  • [Size]5.5X2.1mm DC Round Jack, Great replacement for your old and broken 5.5mmx2.1mm DC jack

DAOKAI 600 Pcs Metal Film Resistor Kit Assorted Kit 30 Values Metal Film Resistor Resistance 1/4 W 1ohm-10Mohm 1% Tolerance, for Electronic Equipment

  • [Fast heat dissipation] The metal film on the surface is wear-resistant and oxidation-resistant, and has good heat dissipation, which can speed up the heat dissipation of the product and is safe to use.
  • [High Precision]1/4W accuracy 1% Metal film resistor, 30 kinds of specifications are available. Better protection of circuit connections and data transmission.
  • [Package includes]You will get 1 x 600pcs 30 Values 1/4 W 1% Metal Film Resistors Assorted Kit (1ohm-10Mohm)

DAOKAI 10Pcs MAX485 Module TTL turn RS - 485 RS485 Module Converter Board Single Chip Development Accessories, for Arduino Integrated Circuits

  • [MAX485 chip] The onboard MAX485 chip is a low-power, slew-rate limited transceiver for RS-485 communication.
  • [Specification] Chip: MAX485 chip, working voltage: 5V, board size: 46x12mm/1.81x0.47in.
  • [Terminal] on-board with 5.08(mm) pitch 2P terminal, convenient for RS-485 communication wiring.

DAOKAI 10 Pcs Micro USB Female to DIP Adapter 2.54mm 5 Pin USB 2.0 Micro USB Socket to DIP Converter Breakout Board for DIY Power Supply with 50 Pin Header

  • [Material] Make of FR4 board and electronic parts, ultra-compact size, stable working performance.
  • [Specification] Rate Load: DC12V / 0.1A; Working Temperature: -25~85℃; Withstand Voltage: AC 500V (50Hz) / min
  • [Size] 15 x 13 mm / 0.59 x 0.51 inch (LxW); Pin Pitch: 2.54mm

DAOKAI PC817 8 Channel Optocoupler Isolation Module 3.6-30V Voltage Converter Driver Photoelectric Isolated Board for Control Relay with 24AWG Wire

  • [Feature] Through the jumper cap can achieve whether the output is high potential outputor low output.
  • [Specification] Driving Terminal Port Signal Voltage:3.3-24V; Output Port Voltage Port:3.3-30V; Output Current: 10mA(Max)
  • [Package Content] The package comes with 1 x PC817 8 Channel Optocoupler Isolation Board, 1 x 24AWG Wire

DAOKAI 10PCS AMS1117-3.3 Step Down Power Voltage Regulator Module DC 4.75V-12V to 3.3V Power Board LDO 800mA 3Pin with Dupont Cable

  • [Specification]Operating junction temperature range: -40 to 125°C, welding temperature (25 seconds): 265°C, storage temperature: - 65~150°C, 3pin
  • [Pruduct]Name:AMS1117-3.3 Step Down Power Voltage Regulator Module, This is a forward regulated step-down power supply module that supports DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output
  • [Use]the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument

DAOKAI 5 Pcs 1/2/3/4/5/6/7/8S Lithium Battery Capacity Indicator Module 3.7V Green Battery Capacity LED Display Board for DIY with 26AWG Wire

  • [Size] 43.5 x 20mm / 1.7 x 0.79inch (L x W)
  • [Parameter] Working Voltage:3-34V; Working Current:5mA; Display Color:Green; Working Temperature:-20~50℃; Voltage Measurement Error:2%
  • [Package Content] The package comes with 5 x 1-8S Lithium Battery Capacity Indicator Module, 1 x 26AWG Wire

DAOKAI 5Pcs Automatic Buck Boost Power Module S09 Boost Buck Converter Module DC3-15V Input to 3.3V Output Voltage Regulator with 24AWG Cable

  • [Stable performance]The designed working frequency is up to 1.2MHZ, high stability, high cost performance, all industrial-grade components, long-term working voltage without drift, suitable for applications with high requirements.
  • [Product introduction]Using a wide voltage and low power consumption scheme, automatic buck-boost DC-DC power supply module, support shutdown function, input voltage MAX15VDC, quiescent current less than 200uA, fixed output, output current MAX600mA.
  • [Parameters] Product model: S09, interface type: SMD plug-in, input voltage: 3V-15V, maximum current: 600mA, output voltage: 3.3V, maximum power: 75%.

DAOKAI 10PCS 1A High Current 18650 Lithium Battery Charging Board 5V Type-C USB Interface Input Charge Module with Double Protection

  • [Parameters]Input voltage: 5V, charging cut-off voltage: 4.2V±1%, maximum charging current: 1000mA, battery over-discharge protection voltage: 2.5V, battery over-current protection current: 3A
  • [Module]1A lithium battery charging and protection integrated board 2-in-1 Type-C interface
  • [Package includes]You will get 10 x Lithium Battery Charging Board and the board size:28 X 17mm / 1.10 X 0.67in

DAOKAI FAQs