Filter To Suit Canadian Spas Fresh Water Wonky Thread Filter SC846 - CD18M
- Filter Diameter (mm) - 150
- Filter Area (sq. ft.) - 50
- Filter Top Cap - Semi Circle Handle
- Filter Length (mm) - 145
- Filter Bottom Cap - Special Coarse Thread
* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.
Products of the RockWaterAir range from £6.07 to £119.99, and the average price of all the products is about £50.64. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.
RockWaterAir offers 90 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The RockWaterAir review will examine the core factors of the brand and its products to help you make an informative buying decision.
Share
RockWaterAir Best Sellers
Last Updated: 14 Jun 2023
RockWaterAir Hot Tub Steps - Colour Grey
- Fits both round and square shape spas
- Sold by the Pool and Spa Centre Official Stockists of Kleen Spa Products
- Ratio can match most spas
- Easy assemble, just three simple steps to assemble
- Compared with other steps ,it is smaller and lighter can save your space when loading container
- Antiskid with Anti-slip mat on top
RockWaterAir Filter Cartridge to replace Arctic Spas Silver Sentinel (Handle Version) SC843
- Made from Polypropylene, and - once dry - can be recycled with other Polypropylene materials
- This is a Filter that replaces Arctic Spas Silver Sentinel Filter
- Silver Sentinel filters are designed for a single use also sentinel filters should last for 3-5 months and are not to be cleaned
- Filters out much smaller particles than traditional filters - down to 1 micron instead of 30 microns - to give even clearer, more sparkling water
- Do not use flocculants such as 3-in-1 water clarifier with this filter; they will shorten its life without providing any benefit for your spa water
RockWaterAir™ Hot Tub Compact Inflatable Spa Bar
- Two carry handles are included
- Sold by Pool and Spa Centre - Official stockist of RockWaterAir products
- This inflatable spa bar has 2 holes to hold you phone
- L: 43cm , W: 40cm, H:11cm
- It has 4 cavities allow you to hold you food and drink close to hand
RockWaterAir 4KW Hot Tub Spa Heater Elements - Standard Coating Fits Balboa, HydroQuip, Gecko, Thermcore, Aquatemp, RMF, Spa Builders and Brett Aqualine Heaters
- Length: 250mm (3.6kW element measures 178mm), Distance Between terminals: 33mm, Height: 60mm
- Sold by Pool and Spa Centre - Official stockist of RockWaterAir products
- This replacement element is used when your existing hot tub element is damaged or faulty, elements commonly burn out or become damaged if the heater manifold is not flooded with flowing water (primed) before the unit is activated
- This 4kW heater element has a standard coating and the item comes complete with 2 x 19mm nuts to secure the spa element in place, also a complete installation guide is issued with the product.
- These can replace elements for Balboa, HydroQuip, Gecko, Thermcore, Aquatemp, RMF, Spa Builders, Brett Aqualine
RockWaterAir™ Scrubbing Pad - Hot Tub Cleaning Pad
- Hot Tub Scrubbing Pad
- Sold by Pool and Spa Centre - Official stockist of RockWaterAir products
- Unique pad design cleans textured surfaces
- Easily cleans dirt and other debris from spa surfaces
- Can be used on acrylic or vinyl
RockWaterAir RWA™ Steps for Hot Tubs - Brown
- Fits both round and square shape spas
- RWA Hot Tub Steps are designed with a perfect size ratio suited to most spas
- Product size - 72cm x 52cm x 40cm
- Antiskid with Anti-slip mat on top
- All corners are rounded to prevent injury.
RockWaterAir™ Hot Tub Large Inflatable Spa Bar
- Two carry handles are included
- Sold by Pool and Spa Centre - Official stockist of RockWaterAir products
- This handy little food storage item removes the need to get out when you fancy a drink or snack, floats in your spa
- Length: 73cm, Width: 47cm, Height: 11cm
- It has 8 cavities of varying sizes for varying uses, it allows you to hold food and drink close at hand
RockWaterAir 2KW Hot Tub Spa Heater Elements - Standard Coating Fits Balboa, HydroQuip, Gecko, Thermcore, Aquatemp, RMF, Spa Builders and Brett Aqualine Heaters
- RockWaterAir 2KW Heater Element has a Standard Coating
- Supplied by Pool and Spa Centre. Official Balboa Stockist
- The item comes complete with 2 x 19mm nuts
- Length:250mm, Distance between termianls:33mm, Height:60mm
- Fits: Balboa, HydroQuip, Gecko, Thermcore, Aquatemp, RMF, Spa Builders, Brett Aqualine
RockWaterAir 3Kw Heater Elements - Titanium Coating Fits Balboa, HydroQuip, Gecko, Thermcore, Aquatemp, RMF, Spa Builders and Brett Aqualine Heaters…
- Length: 250mm
- Sold by Pool and Spa Centre - Official stockist of RockWaterAir products
- These replacement elements are used when your existing hot tub element is damaged or faulty, elements commonly burn out or become damaged if the heater manifold is not flooded with flowing water (primed) before the unit is activated. They have a titanium coating for additional life.
- If your Balboa heater has the following codes, this is the element for you: 58107 / 58061 / 50145 / 58046. (3Kw version)
- Height: 60mm
- Distance Between terminals: 33mm
DxD 0.5HP Circulation Pump DXD-310X (LX JA50 & RockWaterAir-310X Replacement)
- This RWA pump is found on spas and baths
- Sold by Pool and Spa Centre - Official stockist of RockWaterAir products
- Washer connectors are supplied to connect your new pump
- RWA 0.5HP Hot Tub Circulation Pump is an ideal alternative to the JA50 and DXD-310X pumps
- Pump unions included
- LX JA50 Replacement
- It comes with a thermic overheat detector to preserve and extend the motor's lifespan, anti-vibration slab and start capacitor
- DXD-310X Replacement
- 12 Months Parts Warranty as standard
RockWaterAir 2KW Hot Tub Spa Heater Elements - Titanium Coating Fits Balboa, HydroQuip, Gecko, Thermcore, Aquatemp, RMF, Spa Builders and Brett Aqualine Heaters
- Length: 250mm (178mm for the 3.6kW element)
- Sold by Pool and Spa Centre - Official stockist of RockWaterAir products
- Height: 60mm
- Distance Between terminals: 33mm
- 2Kw Titanium Coated
RWA™ Pivot Coverlifter for Hot Tub Lids - Manual Pivot Cover Lifters
- Requires 18" of clearance behind spa and 5" on each side. Works on spas up to 8' in length or width and 40'' in height.
- This UV-resistant aluminium alloy tube. The most classic and favourable model.
- RWA Pivot Coverlifter fits square and rectangle hot tubs and is designed for a simple set up and easy use. Made from high-grade quality 100% aluminium alloy
- Industry leading Hot Tub Coverlifters through Rock Water Air (RWA), built with quality, reliability, functionality and longevity in mind, a quick and easy way to remove you cover safely and easily
- Easy-operating, only 2 steps needed. Two Buckles to strengthen the bearing capacity.
DxD 1.0HP Circulation Pump DXD-310E (LX DH1.0 RockWaterAir-DXD-310E Replacement)
- Our RWA 1.0HP Hot Tub Circulation Pump is found on both hot tubs and baths
- Sold by Pool and Spa Centre - Official stockist of RockWaterAir products
- Washer connectors are supplied to connect your new pump
- Pump unions included
- LX DH1.0 replacement
- It is the perfect replacement for both the DH1.0 and DXD-310E Pump Whirlpool Bath pump
- It has been designed to provide optimal performance and flow, the pump has an anti-vibration slab, the thermic overheat detector preserves the motor's lifespan
- For Dimensions please see last image
- DXD-310E replacement
- 12 Month Warranty from the date of purchase
RWA™ Lever Coverlifter for Hot Tub Lids - Manual Pivot Cover Lifters
- Super strong tubes to hold the cover in place. Rust-resistant Light weight and sturdy. Easy to install and use Requires 18" of clearance
- Easy to lift up by support of the stepping pipe Robust aluminium frame with black powder coating
- There is protective foam on the corners and in the centre of the cover lifter to protect the cover
- RWA Lever Coverlifter is an understyle lifter and is suitable for hot tub models up to 230cm wide
- Non-corrosive mounting bracket is only pushed under the spa so that your hot tub is not damaged.
RockWaterAir Filter Cartridge to replace Arctic Spas Silver Sentinel (Open Core Version) SC842
- Made from Polypropylene, and - once dry - can be recycled with other Polypropylene materials
- Silver Sentinel filters should last for 3-5 months and are not to be cleaned
- Silver Sentinel filters are designed for a single use
- Filters out much smaller particles than traditional filters - down to 1 micron instead of 30 microns - to give even clearer, more sparkling water
- Filter to replace Arctic Spas Silver Sentinel
RockWaterAir Steps for Hot Tub - Black
- Fits both round and square shape spas
- RWA Hot Tub Steps are designed with a perfect size ratio suited to most spas
- Product size - 72cm x 52cm x 40cm
- Antiskid with Anti-slip mat on top
- All corners are rounded to prevent injury.
RockWaterAir 3KW Hot Tub Spa Heater Elements - Standard Coating Fits Balboa, HydroQuip, Gecko, Thermcore, Aquatemp, RMF, Spa Builders and Brett Aqualine Heaters
- RockWaterAir 3KW Heater Element has a Standard Coating
- Supplied by Pool and Spa Centre. Official Balboa Stockist
- The item comes complete with 2 x 19mm nuts
- Length:250mm, Distance between termianls:33mm, Height:60mm
- Fits: Balboa, HydroQuip, Gecko, Thermcore, Aquatemp, RMF, Spa Builders, Brett Aqualine
RWA™ Swing Coverlifter for Hot Tub Lids - Manual Pivot Cover Lifters
- Robust Aluminium Frame with Black Powder Coating
- UV Resistant Spa Cover Lifter
- Rustproof and Durable
- Easy to Assemble and Use Protective Sleeve at Each Corner
- 100% Aluminium Alloy
