Skip to content
Hantek feature image

Hantek

4.8

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Hantek range from £10.99 to £252.99, and the average price of all the products is about £108.5. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Hantek offers 84 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. If you find yourself hesitating about a purchase, check out our thorough Hantek review to see what the best picks are.

Share

Hantek Best Sellers

Last Updated: 14 Jun 2023

Hantek 6022BL PC USB Digital Storage Oscilloscope 2(Digital)+16(Logic) Channel

  • Standard USBXI(TM) interface, easily inserts into USBXI(TM) housing to make up a combination instrument.
  • Great industrial design, the high quality anodized aluminum case is extremely durable and heat-resistant.
  • USB2.0 interface, no external power source required, easy to use.

Hantek HT201 300V 20:1 Passive Attenuator for Oscilloscopes Signal Attenuator 10MHz Bandwidth

  • Attenuation : 20:1
  • measure fuel injector and primary ignition waveforms utilizing an oscilloscope of any brand
  • Input impedance : 1.053 mohm

Hantek 6022BE 2CH USB Digital Storage Oscilloscope 20Mhz PC-Based 48MSa/s + WOSONTEL BNC probe

  • Standard USBXI(TM) interface, easily inserts into USBXI(TM) housing to make up a combination instrument
  • Software Support: Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, Vista
  • USB2.0 interface, no external power source required, easy to use

Hantek HT30A Heavy Duty Automotive Test Lead 3M BNC to Banana Adapter Cable

  • One side of the cable is a standard BNC Connector
  • Hantek Heavy Duty Auto Test Lead/BNC to Shrouded Banana Plugs(Male) or Banana sockets (Female) Adapter/jumper Cable
  • This cable can serve other purpose as well.

Hantek CC65 CC-650 AC/DC Current Clamp Meter for Oscilloscope 20KHz Bandwidth 1mV/10mA 65A with BNC/Banana Type Connector

  • Motor drive of frequency converter (or other electronics) measurement
  • Power circuit measurement and malfunction analysis
  • Power electronics equipment measurement

HANTEK Portable PC Based USB 2CH Digital Oscilloscope 20M Hz 48M Sa/s 1M Byte/CH

  • Standard USBXI (TM) interface, easily inserts into USBXI (TM) housing to make up a combination instrument.
  • Supported Windows Operating system: Windows 2000/NT/XP/VISTA/Windows 7, FFT.
  • Saves Waveform on screen in TXT, JPG/BMP, MS Excel/Word formats;Saved waveform files can be sent as email attachments

Hantek DSO2C15 Digital Oscilloscope 2CH 1GSa/S Storage Economical Oscilloscope 150MHZ Bandwidth Handheld

  • Can save 10 groups of reference waveforms, CSV waveforms,settings and USB one-key screenshot function.
  • 32 Kinds of automatic measurement,statistical analysis function.
  • Math transportation and FFT function, XY mode supports dual window display.

Hantek DSO5102P USB Digital Storage Oscilloscope 2 Channels 100MHz 1GSa/s

  • Automatic Measurement Function: With 32 different kinds of waveform parameters automatic measurement, with FFT standard, provide manual/tracking automatic/cursor test function, achieved the goal of more accurate measurement.
  • Remote Control and U Disk Storage: Hantek DSO5102P oscilloscope can store more than 1000 waveforms information, and can upgrade the system through the USB port, support plug-and-play USB storage devices and communicate with the computer and remote control through USB.
  • Large TFT LCD Display: Large 7-inch 64K color TFT LCD display with a resolution of 800 * 480. It can clearly show any measured alternating current, including sine, square, sawtooth and triangular waves.

Hantek 6254BD Digital USB Storage Oscilloscope 250MHz 1GSa/s 4 CH Arbitrary Waveform

  • It is powered by USB2.0 Interface, plug and play device with small size which is easy for carrying. High cost performance, pass/fail test, resourceful trigger function, dynamic cursor tracking, waveform record and replay function.
  • It has 4 independent analog channels, 1GSa/s real-time sampling rate, 2mV-10V/DIV input sensitivity, 250MHz bandwidth and Arbitrary Waveform Generator.
  • USB2.0 interface, plug and play, free external power supply.

Hantek HT25 Test Probe Inductive Capacitance Sensor Auto Ignition With Three Ends

  • Close to use, can be used to test a spark ignition secondary overlapping wave, overlapping wave parameters, thus achieved the detection, the diagnosis engine ignition position, make each cylinder ignition voltage changing with time directly from the oscilloscope display.
  • Auto ignition probe is a kind of inductive capacitance sensor, it must match with an oscilloscope.
  • The loot line has three ends, a joint meet oscilloscope for BNC use, a clip for use, a clip grounding to pick high-voltage gleaned clip with.

Hantek HT308 COP Extension Cord with Earth Cord HT308 for Diagnostic Coil-on-Plug Lead

  • A simple accessory that allows you to take accurate secondary ignition measurements on Coil-on-Plug (COP) ignition systems
  • COP Extension Cord
  • With Earth Cord For Diagnostic Coil-on-Plug Leads

HANTEK 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator

  • Ignition:primary and secondary.Sensor:Air Flow Meter,Camshaft,Crankshaft,Distributor etc.
  • Intake manifold/Petrol fumes adjusting valve vacuum & ignition,Idle exhaust/Start exhaust ignition
  • CAN bus data examine/signal integrity/LH long time acquisition,LIN bus.Performer: Petrol/Diesel

Hantek DSO2D10 Digital Storage Oscilloscope 100MHz Bandwidth 2CH Dual Channel 1GSa/s 8M Memory Depth with 1CH Waveform Generator

  • with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes;
  • Cost-effective economy oscilloscope, 100MHz Bandwidth, 1GSa/s, 8M memory depth;
  • It is a useful commissioning instrument for various fields such as communication, aerospace, national defense, embedded systems, computers, research and education.

Wosontel Probe Hantek DSO5202P Digital Oscilloscope Oszilloskope 200MHz 1Gs 2CH LCD 7" TFT DE

  • Large (7.0-inch) color display,WVGA(800x480),Record length up to 40K
  • 200MHz bandwidths,1GSa/s Real Time sample rate
  • USB host and device connectivity, standard

Hantek® AC/DC Current Clamp CC 650 Up To 20 kHz 20mA To 650A DC CE

  • Effective Measurement Range: 20mA to 650A DC
  • AC/DC frequency range: Up to 20 kHz
  • Power electronics equipments measurement

Hantek 20:1 Passive Attenuator for Pico 300v Max 10Mhz Passive Oscilloscope Signal Attenuator for Automotive Diagnostics Use,HT201

  • Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition.
  • The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products.
  • [What you will get] 1 x HT201 Signal Attenuation

Hantek FAQs