Skip to content
RTL-SDR Blog feature image

RTL-SDR Blog

4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the RTL-SDR Blog range from £20.99 to £130.83, and the average price of all the products is about £46.32. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

RTL-SDR Blog has a countable number of products for sale, only 7. We analyzed all of them in detail and recommended them to our readers. This RTL-SDR Blog review will give you insight into the products they offer so you can make a better informed decision before you make your purchase.

Share

RTL-SDR Blog Best Sellers

Last Updated: 14 Jun 2023

RTL-SDR Blog V3 R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Software Defined Radio with Dipole Antenna Kit

  • Ideal for many applications, including as a general radio scanner, for air traffic control, for radio communication systems for public security, ADSB, AIS, ACARS, bundle radio, digital P25 systems, POCSAG, weather balloons, APRS, NOAA APT weather satellites, radio astronomy, meteor scatter monitoring, DAB or as a pan adapter with a herk Amateur Radio System
  • Box contents: 1 x RTL SDR Blog V3 R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1 x Multi-Purpose Dipole Antenna Set.
  • With optimised features, including use of the R820T2 tuner, improved component tolerances, a temperature-compensated 1 PPM oscillator (TCXO), SMA F connection, aluminium shielded housing use with thermal pad for pive cooling, activable bias tea circuit and significantly improved antenna set.

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only)

  • Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminium shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.
  • Includes 1x RTL-SDR Blog brand R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle (V3) (Dongle Only)
  • Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only.

RTL-SDR Blog Wideband Low Noise Amplifier Bias Tee Powered

  • Noise figure = 0.6dB @ 900 MHz
  • Frequency range of 50 MHz to 4000 MHz
  • OIP3 = 39.5 dBm @ 900 MHz, P1 Saturation = 22.7 dBm @ 1960 MHz

Broadcast FM Block Filter (88 - 108 MHz Block) by RTL-SDR Blog

  • Insertion loss is less than 0.5 dB between 0 - 1 GHz, and mostly less than 1.5 dB between 1 - 3 GHz.
  • Blocks the broadcast FM band between 88 - 108 MHz with over 50dB of attenuation.
  • Uses SMA female connectors. Comes with a free SMA male to SMA male adapter.

Broadcast AM Reject High Pass Filter (2.6 MHz HPF) by RTL-SDR Blog

  • Blocks the broadcast AM band between 500 kHz - 1.7 MHz with over 50 dB of attenuation
  • RTL-SDR Blog Broadcast AM Reject Filter
  • The 3 dB roll-off point is between 2.5 - 2.6 MHz

RTL-SDR Blog Active L-Band 1525-1660 Inmarsat to Iridium Patch Antenna Set

  • This is an active (amplified + filtered) high performance patch antenna designed for receiving L-Band satellites such as Inmarsat, Iridium and GPS.
  • Includes 1x Active L-Band Patch Antenna (Covering 1525 - 1637 MHz) in Weather Proof Enclosure, 1x 2 meter RG174 extension cable, 1x Flexible Tripod Mount, 1x Suction Cup Mount
  • Requires 3.3 - 5v bias tee power. The RTL-SDR V3 provides 4.5v so is suitable.

RTL-SDR Blog Multipurpose Dipole Antenna Kit

  • Dipole set includes 1x dipole base with 60cm RG174, 2x 23cm to 1m telescopic antenna, 2x 5cm to 13cm telescopic antenna, 1x 3m RG173 extension cable, 1x flex tripod mount, 1x suction cup mount.

RTL-SDR Blog FAQs