Olympic Fixings feature image

Olympic Fixings

Review rating Review rating Review rating Review rating Review rating 4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Olympic Fixings range from £2.99 to £19, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. Olympic Fixings provides their products for a reasonable price, which means the products cost around £9.06 on average. They are affordable options to make your shopping much easier.

Olympic Fixings has a relatively small number of products for sale, only 30. We analyzed some of them in detail and recommended them to our readers. The Olympic Fixings review will examine the core factors of the brand and its products to help you make an informative buying decision.

Olympic Fixings Best Sellers

Last Updated: 15 Jun 2023

Olympic Fixings Downlight Holesaw 9 Piece Set 60, 65, 70, 72, 75 & 85mm Steel Hole Saw Cutters, Arbor and Accessories Ceiling Downlighter Installation Kit for Plasterboard, Plastic & Wood

GIVES GREAT RESULTS - The tri shank arbour offering high torque transmission is stable and accurate when easily attached to a standard drill chuck. Create a pilot hole with the included bit, then using a slow drill speed, apply pressure as the holesaw teeth come into contact with the material. Ease off should heat start to build up before resuming for both best results and to prolong the lifespan of your new holesaw kit.
INSTALL POPULAR DOWNLIGHTS - This Olympic Fixings 9 piece downlighter holesaw set includes all you need to make smooth, clean holes in plasterboard 25mm deep or plastic and wood 10-20mm deep - just add a drill! The 6 steel holesaws with induction hardened teeth in diameters 60, 65, 70, 72, 75 and 85mm are suitable for most popular downlight sizes and ideal for ceilings. Also included is a 32/128 arbor with pilot drill, drive plate and hex key.
EASY TO SET UP - Simpy unscrew and remove the arbor nut, feed the shank of the arbor through the front of the holesaw so it sits flush. Use the hex key to ensure the pilot drill is tight enough within the arbor. Place the drive plate on the back of the holesaw, aligning the two drive pins through the holes. Finally, place the arbor nut over the arbor shank giving a final tighten with a spanner if required.
DIMENSIONS & PACKAGING - Each Olympic Fixings downlight holesaw set is factory sealed in a double blister. Hole saw diameters 60mm = 2 3/8", 65mm = 2 1/2", 70mm = 2 3/4", 72mm = 2 7/8", 75mm = 3" and 85mm = 3 3/8" each with a maximum cutting depth of 25mm in plasterboard or 10-20mm in plastic & wood. Please note: the holesaws are suitable for plasterboard, plastic, wood and other soft materials - not hard materials such as metal or masonry.

White PVC Electrical Insulation Tape Roll - 33m x 19mm x1

Manufactured to BS 3924, EN 60454 Standard - Flame retardant and self-extinguishing
PERFECT - perfect for both DOMESTIC and COMMERCIAL repairs, insulation, colour coding, cable bundling, panel building, loom harnessing etc.
Individually wrapped and shrink wrapped in sleeves
Gauge 0.13mm
Available in ten colours ideal for colour coding cables to make life easier when trying to work our what each cable is for

20MM Open Rubber Grommets Plugs Metal Back Box Electrical Wiring Pack of 100

Open Grommets
Pack of 100
20mm

M6 x 32mm Metal Expansion Plug 18th Edition Fire Resistant Fastener Fixing x10

All Purpose HEAVY DUTY fixing Expansion plugs manufactured from steel; zinc plated
PERFECT - Ideal for most utility pipes, clips and meters e.g. electric, gas and water
Self-centring internal guide for wood/chipboard screw
Designed to assist with compliance to BS 7671 amendment 3 and the Wiring Regulations 18th Edition

Clip 4 Fire 2.5mm Metal Fire Resistant Steel Cable Clip Compliance to 18th Edition Pack of 100

All Purpose HEAVY DUTY Bright zinc plated nail manufactured from Manganese Steel renowned for its high impact strength and resistance to abrasion
Fire rated steel cable clip designed to assist with compliance to 18th Edition
Tested to 930° for 120 minutes - Resistant to fire, corrosion, solvents & chemicals
Successfully tested by Warrington Fire under BS EN 50200:PH120 and BS 8434-2
Complies with BS5839 section 26.2e

Fix 4 Fire 6x32mm Oval Head 18th Edition Fire Resistant Screws x100

Fixes into wood and plasterboard without pre-drilling, can be directly screwed into sandstone, concrete, brick and stone with a pre-drilled pilot hole of 5.5mm. In softer substrates, 5mm may be more appropriate
PERFECT - Fixing fire-resistant clips, consumer units, back boxes, conduit, cable trunking and smoke alarms
Remove the need to use plastic wall plugs - which typically melt at circa 160°C
Designed to assist with compliance to BS 7671 amendment 3 and the Wiring Regulations 18th Edition, Resistant to fire, corrosion, solvents and chemicals
All steel screw fixing for direct fastening into many common building substrates and is suitable for light to medium duty anchoring

Mini Trunking Fire Rated Steel Cable Clips Electrical Cable Management Solution 19x15x22.5mm - Pack of 10

Fix clip in position, lay cables inside clip and bend side tabs over to hold cables within trunking
PERFECT for use in standard mini trunking designed to secure cables in new and existing installations
Designed to meet the general requirements of BS 7671-2008(2015) amendment 3 - chapter 52 regulation 521.11.201 where cables are to be supported by fire resistant fixings
All Purpose HEAVY DUTY mini trunking cable retaining clip manufactured from galvanised steel

Green PVC Insulation Electrical Tape 19mm x 33m - Flame Retardant

33m x 19mm
Flame Retardant
Green

Olympic Fixings Glazing Flat Packers for Windows Mixed Box of 100 Packers - 28mm x 100mm

Universal design
Colour coded for easy identification 16 (6mm), 15 (5mm), 15 (4mm), 15 (3mm), 15 (2mm), 24 (1mm)
Strong durable construction
Pack of 100
6 Colour Pack

Olympic Fixings Olympic Hexagon Head Washered Drillers Heavy Steel to Steel 5.5 x 40mm (100)

C1022 case hardened carbon steel
Manufactured to DIN 7504K
Light and heavy section types available to suit different steel thicknesses
Hexagon flange head
Bright zinc plated

100 Pack, 10mm Blue Expansion Wall Plugs - Brick Block Stone Masonry Concrete

10mm x 50mm Blue Wall Plugs - 100 Plugs Per Pack.
Top quality blue plastic expansion wall plugs, suitable for all concrete, masonry, block, brick, stone and other building materials.
Drill hole diameter: 10mm. Screw size: 14g, 16g, 18g - 6.3mm, 6.8mm, 7.5mm. Plug length: 40mm. Min. drill hole size: 65mm.
Image is for illustrative purposes.
Free UK Delivery

Olympic Fixings Fascia Board Polytop Nails 40mm (Box of 250) Brown

Facia Board Nails
40mm
Polytop in Black, White or Brown
Boxed 250

Olympic Fixings FAQs

You can purchase Olympic Fixings products from the seller Gas N Pow3r, over the last 12 months, the seller has received honest feedback from 1,582 consumers, and the average rating is 4.86. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Olympic Fixings is worth your consideration.