Skip to content
DIYmalls feature image

DIYmalls

4.9
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the DIYmalls range from £8.99 to £149.9, and the average price of all the products is about £32.03. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

DIYmalls offers 72 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. If you find yourself hesitating about a purchase, check out our thorough DIYmalls review to see what the best picks are.

Share

DIYmalls Best Sellers

Last Updated: 14 Jun 2023

DIYmalls Feetech FS90R Micro RC Servo 360 Continuous Rotation 6V for Arduino Microbit Smart Car Robot (Pack of 2)

DIYmalls Feetech FS90R Micro RC Servo 360 Continuous Rotation 6V for Arduino Microbit Smart Car Robot (Pack of 2) Cover
  • Feetech fs90r servo is widely used for microbit, drone, smart car, robot etc.
  • You will only receive 2pcs continuous rotation servo with accessories, no other products..
  • fs90r servo is 360 degree continuous rotation servo, so you can not control its stop position.
Buy on Amazon Find on eBay
GPS Module Receivers

DIYmalls 4pcs Load Cell 50kg Weight Sensor Half-bridge Human Body Scale Strain Gauge +1pcs HX711 Amplifier AD Weighing Module for Arduino

DIYmalls 4pcs Load Cell 50kg Weight Sensor Half-bridge Human Body Scale Strain Gauge +1pcs HX711 Amplifier AD Weighing Module for Arduino Cover
  • This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales
  • The input circuit can be configured to provide a bridge type pressure bridge (such as pressureweighing sensor mode)is of high precisionlow cost is an ideal sampling front-end module.
  • This module uses 24 high precision A/D converter chip hx711, specially designed for the high precision electronic scale
Buy on Amazon Find on eBay
Household Battery Holders

DIYmalls 3V 2 AAA Battery Holder Pack Case Cover Storage Box with on/off Switch PH2.0 Male Connector Cable 14cm for Arduino Microbit (Pack of 5)

DIYmalls 3V 2 AAA Battery Holder Pack Case Cover Storage Box with on/off Switch PH2.0 Male Connector Cable 14cm for Arduino Microbit (Pack of 5) Cover
  • Microbit battery pack switch function: AAA battery holder with ON/OFF switch ; Recessed designed On-Off Switch, more safe, more durable.
  • Designed for AAA battery and comes without batteries, and it's compatible with BBC Micro:bit board.
  • You will receive 5pcs micro bit battery holder.
Buy on Amazon Find on eBay
GPS Module Receivers

DIYmalls BN-880 GPS Glonass Module with Flash HMC5883 Compass + GPS Active Antenna for Arduino Pixhawk Flight Control

DIYmalls BN-880 GPS Glonass Module with Flash HMC5883 Compass + GPS Active Antenna for Arduino Pixhawk Flight Control Cover
  • This gps module has flash to save configuration. So you do not need to reset next time when you use it.
  • Beitian BN-880 is suitable for Open source flight controller, not for flight control with SCM. When you use it for Raspberry Pi, there is no driver needed but you need to install software
  • You can buy different gps module here, https://www.amazon.co.uk/diymalls
Buy on Amazon Find on eBay
GPS Module Receivers

DIYmalls BN-220 Dual GPS Glonass Module with Flash + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk CC3D Betaflight Flight Control

DIYmalls BN-220 Dual GPS Glonass Module with Flash + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk CC3D Betaflight Flight Control Cover
  • When you use bn220 gps for Raspberry Pi, there is no driver required but you need to install software.
  • BN-220 gps has flash to save configuration, so you do not need to reset data next time when you use it. But it doesn't have compass. If you need gps with flash and compass, please buy it here, https://www.amazon.co.uk/diymalls
  • TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
Buy on Amazon Find on eBay
Female Serial Cables Serial Cables

DIYmalls CP210x Series 2102 USB to TTL Serial Module 6 in 1 USB to RS485 RS232, TTL to RS232 RS485, RS232 to RS485 + 6P Female to Female Cable for Nextion Display Arduino Windows Beitian GPS

DIYmalls CP210x Series 2102 USB to TTL Serial Module 6 in 1 USB to RS485 RS232, TTL to RS232 RS485, RS232 to RS485 + 6P Female to Female Cable for Nextion Display Arduino Windows Beitian GPS Cover
  • Before make 6 in 1 usb to ttl module work, you need to install cp210x driver.
  • cp210x series 2102 serial adapter module supports usb to ttl, usb to rs232, usb to rs485, ttl to 232, ttl to 485, 232 to 485.
  • usb to ttl converter module works at 5V and 3.3V, can act as a bridge for hardware without needing a computer or a USB port
Buy on Amazon Find on eBay
Household Battery Holders

DIYmalls 4 Cell 6V AA Battery Holder Case Cover Storage Box w/ 2P FUT J Plug Connector for Flysky Receiver RC Servo Tester(Pack of 4)

DIYmalls 4 Cell 6V AA Battery Holder Case Cover Storage Box w/ 2P FUT J Plug Connector for Flysky Receiver RC Servo Tester(Pack of 4) Cover
  • Compatible with Flysky receiver & servo tester.
  • Designed for 4pcs AA battery.
  • If you have any problem, please contact seller as follow: click " DIYmalls-UK"(you can find "Sold by DIYmalls-UK" under Buy Now button), in the new page, click "Ask a question".
Buy on Amazon Find on eBay
GPS Module Receivers

DIYmalls VK-162 Remote Mount USB GPS Dongle G-Mouse Navigation External GPS Receiver Antenna for Raspberry Pi Linux Window Google Earth

DIYmalls VK-162 Remote Mount USB GPS Dongle G-Mouse Navigation External GPS Receiver Antenna for Raspberry Pi Linux Window Google Earth Cover
  • You need to install driver before use this gps usb on windows but plug and play for linux.
  • VK-162 gps is compatible with raspberry pi linux, and windows, NOT support android and ios system
  • You can buy more usb gps here, https://www.amazon.co.uk/diymalls
Buy on Amazon Find on eBay
Barebone PCs

DIYmalls 868MHz ESP32 LoRa Board V2 8MB Flash 0.96 OLED SX1276 Module + 8cm LoRa Antenna IPX 2dBi + 2p PH1.25 Cable 15cm for Arduino LoRawan IOT (Pack of 2)

DIYmalls 868MHz ESP32 LoRa Board V2 8MB Flash 0.96 OLED SX1276 Module + 8cm LoRa Antenna IPX 2dBi + 2p PH1.25 Cable 15cm for Arduino LoRawan IOT (Pack of 2) Cover
  • You will receive 2pcs 868MHz esp32 lora oled board, 2pcs 868mhz lora antenna,and 2pcs 1.25mm cable.
  • LoRa board 868mhz comes unassembled, soldering required by you, not equipped with lithium battery.
  • When you use lora esp32 868MHz, you need to use 2pcs together,one receiving and another sending.
Buy on Amazon Find on eBay
GPS Module Receivers

DIYmalls BN-180 GPS Glonass Receiver Module + GPS Passive Antenna for Arduino Pixhawk Aircraft CC3D F3 Flight Controller

DIYmalls BN-180 GPS Glonass Receiver Module + GPS Passive Antenna for Arduino Pixhawk Aircraft CC3D F3 Flight Controller Cover
  • TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
  • BN-180 gps can show your speed. When you use it for Raspberry Pi, there is no driver needed.
  • You can buy more gps module here, https://www.amazon.co.uk/diymalls
Buy on Amazon Find on eBay
USB Mice Mice

DIYmalls G71 G-mouse USB GPS Dongle Receiver Module for Raspberry Pi Google Earth Windows, Compatible with VK-172 GPS

DIYmalls G71 G-mouse USB GPS Dongle Receiver Module for Raspberry Pi Google Earth Windows, Compatible with VK-172 GPS Cover
  • g71 gmouse usb gps is plug and play for Raspberry Pi (ensure your copy of Raspbian is up to date), but you need to install driver to make it work with Windows.
  • g71 gps usb support Windows Raspberry Pi and Google earth, NOT compatible with IOS Android.
  • g71 gps receiver has flash inside. The revised configuration can be saved even if power off.
Buy on Amazon Find on eBay
GPS Module Receivers

DIYmalls G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window, Replace vk-172 gps, not for Android IOS

DIYmalls G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window, Replace vk-172 gps, not for Android IOS Cover
  • G72 gps receiver works with Windows, Linux and Google Earth, not for IOS Android
  • G72 usb gps use the newer chip, better than vk-172 gps usb receiver.
  • You need to install driver before use it on window, but plug and play for raspberry pi.
Buy on Amazon Find on eBay
LCD Touch Panels

DIYmalls Nextion Intelligent 7 inch HMI Display 5V Capacitive Touch Screen 800x480 TFT LCD w/Enclosure Case for Arduino Raspberry Pi (NX8048P070-011C-Y)

DIYmalls Nextion Intelligent 7 inch HMI Display 5V Capacitive Touch Screen 800x480 TFT LCD w/Enclosure Case for Arduino Raspberry Pi (NX8048P070-011C-Y) Cover
  • Nextion intelligent 7 capacitive display is a 5V device, but many development boards are 3.3V. It won't make the display power up.
  • Compared with Basic nextion display and nextion enhanced screen, Nextion Intelligent display has more powerful hardware in terms of MCU, Flash storage and SRAM. Audio, video and animation play functions enrich your project HMI interaction.
  • Uploading TFT file via sd card is faster than the usb to ttl, but pls ensure card: FAT32 format, only one tft file(no folder), and no more than 32GB.
Buy on Amazon Find on eBay
GPS Module Receivers

DIYmalls BN-280 GPS Glonass Receiver Module TTL Level + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk Aircraft F3 CC3D Betaflight F4 Flight Control

DIYmalls BN-280 GPS Glonass Receiver Module TTL Level + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk Aircraft F3 CC3D Betaflight F4 Flight Control Cover
  • When you use it for Raspberry Pi, there is no driver required but you need to install software.
  • BN 280 gps has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy beitian bn 880 gps.
  • You can buy different gps module here, https://www.amazon.co.uk/diymalls
Buy on Amazon Find on eBay
Barebone PCs

DIYmalls ESP32 LoRa OLED Board V3 8MB Flash SX1262 Type-C + 868MHz Antenna for Arduino LoRawan IOT (Pack of 2)

DIYmalls ESP32 LoRa OLED Board V3 8MB Flash SX1262 Type-C + 868MHz Antenna for Arduino LoRawan IOT (Pack of 2) Cover
  • You can power 868 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.
  • The newly WiFi LoRa V3 version has the same pin sequence and function as the V2 version. But the V3 chage micro USB port to be type C.
  • You will receive 2pcs 868MHz esp32 lora oled board V3 with 1.25mm-2p cable, and 2pcs 868mhz lora antenna.
Buy on Amazon Find on eBay
LCD Touch Panels

DIYmalls Nextion 3.2 inch HMI Display Resistive Touch Screen 5V TFT LCD 400x240 for Arduino Raspberry Pi (NX4024T032)

DIYmalls Nextion 3.2 inch HMI Display Resistive Touch Screen 5V TFT LCD 400x240 for Arduino Raspberry Pi (NX4024T032) Cover
  • Nextion 3.2 display is a 5V device, but many development boards are 3.3V. It won't make the display power up.
  • As a member of Nextion basic series, NX4024T032 is a powerful 3.2 inch HMI: a 3.2" TFT 400X240 resistive touch screen display, 4M Flash, 2KByte RAM, 65k colors.
  • Uploading TFT file via sd card is faster than the usb to ttl, but pls ensure card: FAT32 format, only one tft file(no folder), and no more than 32GB.
Buy on Amazon Find on eBay
LCD Touch Panels

DIYmalls Nextion Enhanced 2.8 inch HMI Display Resistive Touch Screen 5V TFT LCD 320x240 for Arduino Raspberry Pi (NX3224K028)

DIYmalls Nextion Enhanced 2.8 inch HMI Display Resistive Touch Screen 5V TFT LCD 320x240 for Arduino Raspberry Pi (NX3224K028) Cover
  • Nextion enhanced 2.8 display is a 5V device, but many development boards are 3.3V. It won't make the display power up.
  • Compared with NX3224T028, NX3224K028 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU.
  • Uploading TFT file via sd card is faster than the usb to ttl, but pls ensure card: FAT32 format, only one tft file(no folder), and no more than 32GB.
Buy on Amazon Find on eBay

DIYmalls FAQs