Trucol Top 19 Products from Labels & Stickers Brand

10 sheets of water slide decal paper transfer foil A4 metallic silver reflective for laser printer copier (only the print is transferred - no foil)

Adhesive Sheets

1.) Print: A.) Create your picture. B.) Print the image normally (NOT reversed / mirrored). C.) Print on Glossy Side - Paper Type Setting: Label Paper (175g / m² or higher) - Paper Source: Manual - Black / White (NOT colored). 2.) Lamination: A.) Lay the metallic foil on the print with the gray side down. B.) Now laminate this composite with a preheated laminating machine *

Lamination Temperature: 120 ° C (250 ° F) - Speed: the lowest possible setting * The ideal lamination temperature depends on the toner and laminator used. There are no exact dates for this. 3.) Carefully remove the foil paper. 4.) Lamination the 2nd: A.) Now remove the paper from the RCP material and place it on the print.

B.) Now laminate them in the preheated laminator * Lamination temperature: 120 ° C (250 ° F) - Speed: the lowest possible setting * The ideal lamination temperature depends on the toner and laminator used. There are no exact dates for this. 5.) Replacing the RCP: Use damp cloths or tea towels to assist in removing the RCP.

6.) Cut out your picture. 7.) Soaking: A.) Put the cut out motif into a jar of water for 3-5 seconds. - Use hot water in winter. - Initial adhesion is worse if you use cold water B.) Coat the surface to be decorated with Glue W1 glue. 8.) Take your wet pressure out of the water and apply it on the glue so that your print is positioned right side.

The mirrored print comes on the glue. Press the image for 1-2min. Now remove / push the protective paper aside. 9.) Use either a rubber scraper or handkerchiefs to remove excess moisture / water. 10.) Now dry the sticker with a hair dryer for 3-5min * Or oven: 80 ° C (180 ° F) for 10min. 11.) Remove the last film and dry at 150 ° C (300 ° F) for 10min

Read more Read less

2000 Labels Label Roll (75 mm x 51 mm) Unprinted Endless Label Paper (2 Rolls) Premium Paper Core Diameter 76 mm for Thermal Transfer Direct Printers - Label Printer Midrange Industrial Printer

Printer Labels

Trucol

Trucol Best Sellers

10 sheets of water slide decal paper transfer foil A4 metallic silver reflective for laser printer copier (only the print is transferred - no foil)

2000 Labels Label Roll (75 mm x 51 mm) Unprinted Endless Label Paper (2 Rolls) Premium Paper Core Diameter 76 mm for Thermal Transfer Direct Printers - Label Printer Midrange Industrial Printer

On Both Sides + Single Sided Photo Paper DIN A4 115 g/m² - 295g/M²/Glossy/Dries Immediately/Waterproof/Very High Colour Brilliance for InkJet Printer 140g/m² A4 2-S

3 Sheets Inkjet Printer Water Slide Film White DIN A4 (210 x 297 mm) White Base Printable Decal Paper Water Transfer Film

10 x A4 PE film printable with black / white laser + colour laser + inkjet printer with a strong adhesive for e.g. product labelling, barrel labelling, sea container identification

5 sheets of A4 adhesive sheet vinyl white for inkjet printers: inkjet Adhesive foils in white opaque version with colorless, non-yellowing, heat-stable adhesive. Perfectly suited for outdoor use, because the film is weatherproof

Water Slide Film White for Laser Printers - Ultra-Thin Decal Decal - Wet Slide Film for Ceramic, Glass, Candles, Metal, Plastic, Model Making (A4-8 Sheets)

Sublimation paper sublimation transfer paper for textiles (polyester) and solids such as ceramics, aluminium, glass, wood, plastic, etc. 95g/m² DIN A4

Adhesive Film Weatherproof Outdoor (Colour) Laser Films in Clear-Transparent/White Shiny/Silver Effect/Gold Effect/White-Opaque matt Finish. 10x A4 glasklar

10 sheets of A4 clear transparent adhesive films for black and white laser printers and copiers (standard laser printer + copier) Thickness: 0.08mm

400 Labels 105 x 148 mm Self-Adhesive Pack of 4 on a Sheet A4 Total 100 Sheets All-Round Quality White

10 sheets of A4 adhesive white premium films for black and white laser printers and copiers (standard laser printer + copier) Thickness: 0.08mm

trucol 10 sheets of A4 ADHESIVE weatherproof (color) -Laserfolien in clear-transparent design with clear, non-yellowing, heat-stable adhesive

trucol 10 sheets of A4 ADHESIVE weatherproof (color) -Laserfolien in white opaque version with colorless, non-yellowing, heat-stable adhesive

100 Pack self-adhesive white labels 105x42,3 on the DIN A4 25 1000 Sheets DIN A4 70 g/m² Suitable for Inkjet Printers, Laser Printers and Copiers. 25 Blatt / 350 Etiketten

100 Pack self-adhesive white labels 70x25,4 on the DIN A4 25 1000 Sheets DIN A4 70 g/m² Suitable for Inkjet Printers, Laser Printers and Copiers. 25 Blatt / 825 Etiketten

100 Pack self-adhesive white labels 48.5x25.4 on the DIN A4 25 1000 Sheets DIN A4 70 g/m² Suitable for Inkjet Printers, Laser Printers and Copiers. 25 Blatt / 1000 Etiketten

Self-adhesive white labels 70 x 42.3 on the format DIN A4 25, 100, 1000 sheets DIN A4, 70 g/m2, suitable for inkjet printers, laser printers and copiers. 25 Blatt / 525 Etiketten

100 Pack self-adhesive white labels 117X41 on the DIN A4 25 1000 Sheets DIN A4 70 g/m² Suitable for Inkjet Printers, Laser Printers and Copiers. 25 Blatt / 50 Labels

Trucol FAQs

Similar Brands