Famag feature image

Famag

Review rating Review rating Review rating Review rating Review rating 4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Famag range from £10.96 to £412.08, and the average price of all the products is about £83.14. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Famag offers a variety of products, there are 306 products available, 20 of which were analyzed in detail and recommended to customers. The Famag review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

Famag Best Sellers

Last Updated: 14 Jun 2023

FAMAG 1622.505 Bormax®. Forstner bit Set, 5 Pieces Bormax- 6 pcs. Set in Wooden case. 15, 20, 25, 30, 35mm

Quality: Premium Tools: Rapid Forstner bits with center point, 2 main cutting & serrated peripheral cutting edge in wave form. Nachschleifbar lighter than normal Forstner bits. Material: Alloyed tool steel
5-piece Forstnerbohrersatz in the wooden box. Sizes: Ø 15, 20, 25, 30 and 35 mm The most common dimensions of our drills are supplied in beautiful and very stable wood boxes. In those wooden boxes, each drill has its place, and the internal parts are designed so that the drill may not strike. A permanently safe storage place is guaranteed so much appreciate many craftsmen.
Tip: Tip in the free manual and stationary use. Incredible by very low heat high durability when drilling quality
Material: Alloyed tool steel Speed: 750-2500 min-1, based on soft wood: E.g. Ø 30 mm-= 1500 min-1 Application: Rapid drilling in European hardwood, softwood, chipboard, MDF sheets, etc. Very rapid machining of solid wood and particle board at significantly lower feed forces and significantly faster drilling than with conventional Forstner

FAMAG Wood Twist Drill Bit Set 8 Pieces Diameter 3,4,5,6,7,8,9,10 mm in Case

High-quality design in fully ground quality with centre point, two main cutting edges and two tapers
5-piece wood twist drill set with diameters 3,4,5,6,7,8,9,10 mm
The best thing you can currently get from wood drills
Thanks to specially designed tensioning grooves, very good chip transport is achieved
For dimensional drilling in all wood-based materials, hardwood and coated panels

FAMAG Profi Line 3382.822 Carbide Milling Cutter Set 22 Pieces Shaft Diameter 8 mm in Plastic Box

The shanks are machine wet cylindrical ground to the exact diameter of 8.0 mm and thus have a perfect concentricity
Every router bit finds its safe place in the top class plastic box. Due to the detailed labelling you can see at a glance the profile of each cutter and its dimensions
High quality FAMAG carbide cutter set Profi Line, 22 pieces in plastic box Content : 1 flush milling cutter with ball bearing (Ø12,7mm, NL 25,4mm) ; 1 tine milling cutter (Ø14,3mm, NL 12,7mm) ; 1 lettering milling cutter (Ø12,7mm, 60°) ; 1 V-groove milling cutter (Ø12,7mm, 90°) ; 6 grooving milling cutters (Ø6, 8, 10, 12, 16, 20mm, NL 20mm)
2 round cutters (Ø22,7mm, R 5 + Ø28,7mm, R 8mm) ; 2 fillet cutters (Ø8mm, R 4 + Ø12mm, R 6mm) ; 2 fillet cutters with ball bearing (Ø19,5mm, R 5mm + Ø25,5mm, R 8mm) ; 1 profile cutter (Ø21mm, R 5mm) ; 1 profile cutter with ball bearing (Ø27mm, R 4) )
1 chamfer milling cutter (Ø19.9mm, 22°) ; 1 edge milling cutter (Ø28mm, 45°) ; 1 rebate milling cutter (Ø31.8mm, NL 12.7mm) ; 1 edge trim milling cutter (Ø22.2mm, R 3.18mm) ; 2 replacement ball bearings (Ø 9.5mm + Ø 12.7mm) The milling cutters have a shank diameter of 8mm and are provided with a BG-compliant marking - Made in Germany

Famag 5-Piece Countersunk Drill Bit Set, Spiral Drill Bits with Countersink, Diameter: 3-6 mm, with Practical Wooden Box, 3574504

Includes five wood twist drill bits in the sizes: diameter 3 mm, 4 mm, 5 mm, 6 mm, as well as a depth adjustment ring
The spiral drill bits with countersink allow drilling and countersinking in one operation, therefore saving time
The quality tool is suitable for both professionals and hobbyists
The included box is also made of high-quality wood and ensures optimal storage of your tools
The countersunk drill bits are ideal for drilling in softwood and conditionally for working with European hardwood

Famag 159921000 Wood Spiral Drill Bit HSS-G Long 10 x 250 mm S=10 Gold

High-quality design in fully ground quality with two main cutting edges and two tapers
Diameter: 10 mm; usable length: 200 mm; total length: 250 mm; shaft diameter: 10 mm
The best thing you can currently get from wood drills
Thanks to specially designed tensioning grooves, very good chip transport is achieved
For dimensional drilling in all wood-based materials, hardwood and coated panels

Famag Bohrsenk Set 4 Pieces Diameter 4/5/6 mm and Depth Stop in Wooden Box, 3577504

Particularly well suited for drilling s into the decking boards in terrace and to sink cleanly and precisely
High-quality, 4-piece drill countersink set with sizes 4 + 5 + 6 mm and rotating bearing depth stop made of br; the pre-drill is adjustable in the drilling depth
The pivoted depth stop remains on impact on the workpiece and thus leaves no marks on the wood
Drilling diameter 4 + 5 + 6 mm, countersunk diameter 12 mm with countersunk angle 60

Famag Super Forstner Drill Bit Set Classic WS with Diameter 15, 20, 25, 30, 35 mm in Wooden Box

1. Place in the large Forstner drill test in the USA (Fine Woodworking, April 2008)
Super Forstner Drill Bit Classic Made of Alloy Tool Steel - Made in Germany
With centre point, two main cutting edges and two closed, contrasting perimeter cutting edges
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
5-piece Forstner drill bit set in wooden box with diameter 15, 20, 25, 30, 35 mm

FAMAG Vario Set Countersink HM 90° + Wood Twist Drill 1594 3, 4, 5, 6, 8 mm

Drilling and countersinking in one process by directly attaching to wood spiral drill (also intermediate dimensions e.g. 5.5 mm)
Professional 90° countersink with carbide fittings in two-piece design in set with wood twist drill HSS-G 1594 in diameters 3, 4, 5, 6, and 8 mm
With screwed Vario there are the following dimensions (drill / countersunk size): 3/10.5 mm 4/11.5 mm 5/12.5 mm 6/13.5 mm 8/14.5 mm; suitable speed: 3000 to 5000 min-1, e.g. drill 4 mm = 4000min-1 in European hardolic z, also significantly slower. In cordless screwdrivers possible
Universally attachable to all wood twist drills with a diameter of 3 mm to 8 mm
Suitable for all woods, coated panels, many plastics and exotic patio wood

Famag 3 Piece Extension Kit in Wooden Box ID10mm GL 80, 125, 250mm

Famag.

FAMAG 3533 Countersink WS 12 mm with Plastic Handle - 3533.012

For quick countersinking by hand into all solid woods and panel materials
Hand countersink with 5-blade 90° countersink
The design with wooden handle is particularly comfortable to hold
Made in Germany - quality tools for the professional craftsmen, made with modern production technology in Remscheid
12 mm with plastic handle

FAMAG 1639.583 Extension Set in Wooden Box Diameter 8 mm, 3 Pieces, 80, 125, 250 mm, Grey, 8mm, 250mm

The extensions are suitable for use in head and hardwood, as high demands on the machine chuck are produced
The extension set is ideal for deep hole drilling or woodturning work
The four clamping screws ensure a secure tool holder
The drill adapters come in a beautiful wooden box that optimally protects the tool
Technical details: material alloyed tool steel, inner diameter 8 mm, total length 80, 125, 250 mm

FAMAG 1405.320 Countersink 320 mm Square with Clamping Device

Suitable for drills with 43 mm euro neck and drill length up to 350 mm
FAMAG countersink device for precise drilling at exactly 90° angle – 210 mm, square base with clamping device
With additional handle, 2 infinitely adjustable depth stops and stabilisers at the end of the guide rods
Made in Germany by FAMAG
Machine holder, stabiliser and base made of die-cast aluminium; guide columns made of stainless steel

FAMAG Wood Twist Drill Bit Set 7-Piece Diameter 3, 4, 5, 6, 8, 10, 12 mm in Wooden Box

Fully ground spiral in type N with double back guide for very good drilling results, even at lower speeds
7-piece Bormax wood spiral drill bit set in a wooden box with a diameter of 3, 4, 5, 6, 8, 10, 12 mm
Works flawlessly in working softwoods, European hardwoods, chipboard and MDF boards, best in cordless screwdrivers
High quality, made in Germany

Famag Lewis 1414200 Auger Set in Wooden Box 10-20 x 235 mm Set of 8

Absolutely to size

Famag Bormax 2.0 WS 1622530 Forstner Drill Bit Set (3 Pieces, Size Ø 40-60, for Wood Materials, MDF, Hardwood, with Wooden Box)

The drill bits are particularly suitable for softwoods, European hardwood, chipboard and MDF boards.
The cylinder head drill set consists of three high-quality wood drills.
The hex shank provides better power transmission.
The bits come in a beautiful wooden box that optimally protects the tool.
Technical details: material: alloyed tool steel/speed 900 - 3200 min-1. e.g. diameter 35 mm, 1500 min-1 in glue binder.

Famag 1664509 1664.509 Drill Bit Set 9 Pieces Diameter 15-50 mm + 250 mm Extension Grey

International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Famag 3532.020 Metal Drill

5-edge countersink with point angle 90° and bit shaft E 6.3

Famag - 6 PCE UK Edition Forstner Bit Set : BORMAX 2, 12,13,16,18,20,22 mm. Premium Made in Germany in Wooden Box Series 1622.554


Famag FAQs

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Famag is worth your consideration.

Most of the Famag products are produced by Cut360 UG and Famag werkzeugfabrik GMBH. The manufacturer provides Famag with a steady supply of products, and they have a good cooperative relationship with each other.