ElekTek

4.9

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the ElekTek range from £3.29 to £13.49, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. ElekTek provides their products for a reasonable price, which means the products cost around £7.61 on average. They are affordable options to make your shopping much easier.

ElekTek offers a variety of products, there are 249 products available, 19 of which were analyzed in detail and recommended to customers. If you find yourself hesitating about a purchase, check out our thorough ElekTek review to see what the best picks are.

ElekTek Best Sellers

Last Updated: 14 Jun 2023

ElekTek Low Profile in-Line Torpedo Switch 2 Amp Use 2 or 3 Core Flex Transparent

Switches & Dimmers

Buy on Amazon Find on eBay

2 amp (250v), Size: 60mm x 26mm x 15mm plus switch rocker

Low Profile Torpedo Switch 2 Amp for Use with 2 or 3 Core Flex Ideal for table lamps.

Secure screw together case. CE & ENEC/IMQ European-wide approval.

Screw terminals with contacts for LIVE, NEUTRAL & EARTH

Installation instructions included

ElekTek Safety Switch Lamp Bulb Holder Half Inch Entry BC B22 with Shade Ring and Locking Screw in Base Brass

Switch Lamp Bases Brass Lamp Bases

Buy on Amazon Find on eBay

For all types of B22 (22mm) Bayonet Cap Bulb: Incandescent, LED and Halogen

IMPORTANT: Switch will ONLY work when a bulb is fitted - Patented Safety Switch Push-Bar Design

Suitable for lighting circuits only - T2 temperature rating (220°C). Fully approved to BS 7895:1997

Made in UK: Solid Brass construction with Solid Brass Shade Ring. ALWAYS REMEMBER: Metal fittings MUST be earthed - when re-assembling after wiring, please ensure Earth Strap on the switch insert sits outside of the lamp holder body as originally supplied - do not squeeze inside the lamp holder body

Dimensions: choice of 10mm or 1/2" threaded bottom entry - PLEASE CHECK YOUR THREAD SIZE BEFORE ORDERING; Height 63mm, Diameter 32mm (Max.); Cable/Flex aperture approx. 7mm

Read more Read less

ElekTek Foot Press Switch in Line Push Button 65mm Diameter for 2 or 3 Core Flex Black

Switches & Dimmers

Buy on Amazon Find on eBay

For 2 Amp lighting use only; use 0.75mm Max. lighting flex

65mm overall diameter with 42mm press button, can also be used as an inline hand operated switch for table or bedside lamps - ideal for those with limited hand mobility

Please refer to product images for wiring detail and screw terminals (printed full instructions included with product)

ONLY CONNECT LIVE WIRE SECURELY THROUGH SWITCH BLOCK

Neutral & Earth screw terminals can be removed for straight through wiring of a new flex

ElekTek European E27 Lamp Shade to B22 Bayonet Adaptor Reducer Ring Metal 3 Pack

Metal Lamp Shades E27 Lamp Shades

Buy on Amazon Find on eBay

Superior Quality Pressed Steel Euro Lamp Shade Adaptor/Rdeducer Ring - 3 Pack (3 Pieces)

Converts/reduces Large Hole (E27/ES - Edison Screw) European and Continental Ceiling Pendant and table Lamp Shades to Small Hole UK (B22/BC - Bayonet Cap) fitting

Made in the UK - This ES/E27 to BC/B22 lampshade adaptor is used to reduce larger, continental style lampshades, down to fit standard UK 29mm shade rings.

Fits over standard 27mm lamp holder shade hole and is held in place by the shade ring on your light fitting.

Centre hole: 29mm, Outer diameter: 60mm, Stepped at: 40mm

ElekTek Lamp Holder Un-Switched Bayonet Cap B22 Half Inch Entry with Shade Ring Brass

Lamp Shades

Buy on Amazon Find on eBay

Hand assembled - easy to separate for fitting: simply remove the thin upper shade ring by unscrewing anti-clocwise; hold base with the Earth terminal pinched between thumb and index finger and unscrew thicker lower ring by unscrewing anti-clockwise. When re-assembling ENSURE ceramic insert is aligned correctly in base & body alignment slots are aligned with ceramic insert

Standard UNSWITCHED B22 (22mm) bayonet cap Lamp Holder with shade ring - suitable for bulbs up to 200W (for SWITCHED B22 version, ElekTek Safety Switch available in separate listing which cuts power to the plunger contacts when a bulb in not in place)

WARNING: All metal light fittings must be earthed

Maximum assembled height: 48mm

Made in the UK

Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use (beware of cheaper, pressed type bases that cannot carry a locking screw) - loosen screw, thread onto existing threaded fitting and tighten locking screw before wiring

Read more Read less

ElekTek Twisted Braided Fabric Covered Flex - Gold - Colours to Match ElekTek Ceiling Plates, Roses, Chain and Lamp Holders - 2 m Length Pack

Gold Electrical Wire Electrical Wire

Buy on Amazon Find on eBay

Pre-packed 2 m length. High quality & durable. Ideal for your lighting projects with a choice of colours available. Designed to match ElekTek fittings such as Ceiling Roses, Lampholders and Switches

Premium Product - Made in Europe - 3 Core Twisted Braided Lighting Flex 0.75mm2. Ideal for Pendant Lighting, Floor and Table Lamps. Dimensions: 6-7mm Dia. (2-3mm 3x individual wires)

Premium Quality Products by ElekTek. Manufactured in Europe & UK. We are dedicated to customer satisfaction, which means that if you are not happy with your purchase you can always return and secure a full refund. REMEMBER - ELECTRICITY CAN KILL - IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN

Important Facts: This flex conforms to European Standards EN50363-3 and EN60332-1-2. Before installing, switch off electricity at mains

Choice of Colours - Gold (Brass), Antique Gold (Antique Copper), Brown (Fusion Bronze), Silver (Chrome), Nickel Effect, Willow Green, Pink, Brilliant White, Antique White, Black (Bronze)

Read more Read less

ElekTek Foot Press Switch in Line Push Button 65mm Diameter for 2 or 3 Core Flex Gold Effect

Switches & Dimmers

Buy on Amazon Find on eBay

For 2 Amp lighting use only; use 0.75mm Max. lighting flex

65mm overall diameter with 42mm press button, can also be used as an inline hand operated switch for table or bedside lamps - ideal for those with limited hand mobility

Please refer to product images for wiring detail and screw terminals (printed full instructions included with product)

ONLY CONNECT LIVE WIRE SECURELY THROUGH SWITCH BLOCK

Neutral & Earth screw terminals can be removed for straight through wiring of a new flex

ElekTek Foot Press Switch in Line Push Button 65mm Diameter for 2 or 3 Core Flex White

Switches & Dimmers

Buy on Amazon Find on eBay

For 2 Amp lighting use only; use 0.75mm Max. lighting flex

65mm overall diameter with 42mm press button, can also be used as an inline hand operated switch for table or bedside lamps - ideal for those with limited hand mobility

Please refer to product images for wiring detail and screw terminals (printed full instructions included with product)

ONLY CONNECT LIVE WIRE SECURELY THROUGH SWITCH BLOCK

Neutral & Earth screw terminals can be removed for straight through wiring of a new flex

ElekTek Switch Surround Frame Cover Finger Plate Contemporary Satin Chrome Silver Effect

Switch Plates

Buy on Amazon Find on eBay

PLEASE CHECK YOUR SWITCH SIZE BEFORE ORDERING Overall size: 110 x 110mm Front aperture 82 x 82mm

Please refer to the dimensions listed below before making your purchase.

Transform your white plastic light switch in minutes (not suitable for flush-mount switches)

Maximum light switch size: 90 x 90 x 10mm (H x W x D) PLEASE CHECK YOUR SWITCH SIZE BEFORE ORDERING

Easy to apply self-adhesive fixing - No wiring necessary

ElekTek 65mm Diameter Ceiling Chandelier Plate with Hook Antique Brass

Brass Screw-in Hooks Screw-in Hooks

Buy on Amazon Find on eBay

65mm / 2.56" diameter 50mm / 2" hole centres

Ceiling Light Fitting Hook Plate 65mm riveted with earth tag, no assembly required, with 38mm matching slotted screws

Solid brass, made in the UK, Cable passes through centre of the hook

It is safe to suspend loads up to 5kg (12lbs). Screws must be fixed into ceiling joist.

25mm / 1" hook depth 7mm /0.3" hole in centre

Pine Ceiling Wall Plinth Rose Surface Pattress Natural Pine 134mm 20mm Thickness

Buy on Amazon Find on eBay

Use in conjunction with the ElekTek range of ceiling roses, hook plates or batten lamp holders for the ultimate design effect

These decorative pattresses provide a sturdy and stylish base for a ceiling fitting (pendant-chandelier) or wall lamp, raising it off the surface by 20mm

Overall base diameter - 134mm 5.25" - Front face surface diameter - 118mm 4.625"

Fixing hole centres - 50mm 2" - 2.5mm pilot holes for attaching rose to plinth - 5mm through holes for fixing to surface (wall/ceiling)

Centre hole diameter - 35mm 1.4" - Plinth thickness - 20mm 0.787"

Elektek Back Plate Nipple Fitting 1/2-Inch Threaded Brass Boss 25mm Dia. With Screws for Lamp Bulb Holders

Hex Wood Screws Phillips Wood Screws

Buy on Amazon Find on eBay

Precision made; round, smooth and burr-free.

Solid Brass - UK MADE

3 matching screws supplied

25mm Diameter Back Plate with 3 countersunk screw holes

1/2" Threaded Mounting Boss

ElekTek B22 BC Batten Lamp Holder 52mm Diameter Base 3 Fixing Holes - Brass

Lamp Bases

Buy on Amazon Find on eBay

B22 (22mm) Bayonet Cap with shade ring - suitable for bulbs up to 200W

3 Fixing holes on 40mm centres PCD, Base diameter 52mm, Maximum height 39mm

PLEASE CHECK YOUR BULB CAP TYPE & SIZE BEFORE ORDERING

Made in the UK

Ceramic interior with Earth terminal and brass plunger contacts

Brass Safety Switch Lamp Holder 10MM BC B22 with Shade Ring * Made in UK *

Lamp Bases with Lamp Shade Lamp Bases

Buy on Amazon Find on eBay

For all types of B22 (22mm) Bayonet Cap Bulb: Incandescent, LED and Halogen

IMPORTANT: Switch will ONLY work when a bulb is fitted - Patented Safety Switch Push-Bar Design - MAKE SURE lamp holder is fully screwed together when assembled so that centre Safety Pin correctly depresses when a bulb is installed.

Suitable for lighting circuits only - T2 temperature rating (220°C). Fully approved to BS 7895:1997

Made in UK: Solid Brass construction with Solid Brass Shade Ring. ALWAYS REMEMBER: Metal fittings MUST be earthed

Dimensions: PLEASE CHECK YOUR THREAD SIZE BEFORE YOU ORDER - choice of 10mm (M10) or 1/2" (26 TPI) threaded bottom entry - as a guide, newer lamps will 'tend' to be 10mm (metric), old lamps will 'tend' to be 1/2" (imperial); Height: 63mm, Diameter: 32mm (Max.); Cable/Flex aperture/opening approx. 7mm

Read more Read less

80mm Lamp Shade Spring Clip Retainer for Glass Lamp Shades 3 Pack

Glass Lamp Shades Lamp Shades

Buy on Amazon Find on eBay

Fits over standard 10mm base lamp holder thread

3 Pack Lamp Shade Retainer Spring Clip For Glass Lamp Shades

This lampshade retainer is used to retain glass lamp shades and fits a standard 10 mm threaded lamp holder.

Steel with a 10mm mounting hole

80mm end-to-end overall length when measured flat

ElekTek Ceiling Pendant Lamp Holder Cord Grip Suspension Flex Clamp BC B22 Antique Brass

Antique Pendant Light Fixtures Brass Pendant Light Fixtures

Buy on Amazon Find on eBay

Earth terminal and brass plunger contacts with screw-down connectors

B22 (22mm) Bayonet Cap Pendant Lamp Holder With Shade Ring - suitable for bulbs up to 200W

Standard UK B22 shade ring

Manufactured in the UK to all current UK & EU electrical standards

Back Plate Nipple Fitting 10mm Threaded Brass Boss 25mm Diameter with Screws For Lamp Bulb Holders

Hex Wood Screws Phillips Wood Screws

Buy on Amazon Find on eBay

Precision made; round, smooth and burr-free.

Solid Brass base - UK MADE

M10 10mm Threaded Mounting Boss

3 matching screws supplied

25mm Diameter Back Plate with 3 countersunk screw holes

Antique Brass Gothic Open Link Chain for Chandelier and Lighting 29mm x 15mm 2 Metre Pack

Antique Chandeliers Brass Chandeliers

Buy on Amazon Find on eBay

29x15mm link size

2 metre pack of decorative lighting chain in the Gothic style

Links not welded so can be extended or shortened

2.3mm square section bar

ElekTek ES E27 Lamp Bulb Holder Plain Skirt 10mm Entry Brushed Antique Brass Ideal for Vintage Filament Bulbs

E27 Lamp Bases Antique Lamp Bases

Buy on Amazon Find on eBay

Has an internal safety locking screw in the base to prevent the loosening of the lamp holder after it has been installed.

Solid brass, made in the UK . Locking body M10 10mm threaded entry Edison Screw ES E27 cap brass earthed lamp holder, with internal locking screw and ceramic interior with brass plunger contacts.

This solid brass Edison Screw ES E27 lamp holder is intended primarily for attachment to a male 10mm threaded connector.

This product is suitable for lighting circuits only. T2 temperature rating (220°C). Before installing, switch off electricity at mains.

10mm Entry Plain Skirt E27 Earthed Lamp Holder. Ideal for vintage look lamps and bulbs.

ElekTek FAQs

How much do ElekTek products cost?

ElekTek Low Profile in-Line Torpedo Switch 2 Amp U... is the top 1 product we recommend in the ElekTek buying guide, which is priced at £4.49, you can view it on Amazon page.
ElekTek Safety Switch Lamp Bulb Holder Half Inch E... is one of the popular products we recommend in the ElekTek buying guide, which is priced at £8.99, you can view it on Amazon page.
Elektek Back Plate Nipple Fitting 1/2-Inch Threade... is the cheapest product in the ElekTek picks list, which is priced at £3.29, you can view it on Amazon page.
Antique Brass Gothic Open Link Chain for Chandelie... is the most expensive product in the ElekTek picks list, which is priced at £13.49, you can view it on Amazon page.

Where can you buy ElekTek products?

You can purchase ElekTek products from the seller Buy It Better Limited, over the last 12 months, the seller has received honest feedback from 497 consumers, and the average rating is 4.87. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of ElekTek?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and ElekTek is worth your consideration.

Who are the manufacturers of the ElekTek products?

Most of the ElekTek products are produced by Buy It Better Ltd, Buy It Better Limited, and Buy It Better. The manufacturer provides ElekTek with a steady supply of products, and they have a good cooperative relationship with each other.

Similar Brands

ElekTek

ElekTek Best Sellers

ElekTek Low Profile in-Line Torpedo Switch 2 Amp Use 2 or 3 Core Flex Transparent

ElekTek Safety Switch Lamp Bulb Holder Half Inch Entry BC B22 with Shade Ring and Locking Screw in Base Brass

ElekTek Foot Press Switch in Line Push Button 65mm Diameter for 2 or 3 Core Flex Black

ElekTek European E27 Lamp Shade to B22 Bayonet Adaptor Reducer Ring Metal 3 Pack

ElekTek Lamp Holder Un-Switched Bayonet Cap B22 Half Inch Entry with Shade Ring Brass

ElekTek Twisted Braided Fabric Covered Flex - Gold - Colours to Match ElekTek Ceiling Plates, Roses, Chain and Lamp Holders - 2 m Length Pack

ElekTek Foot Press Switch in Line Push Button 65mm Diameter for 2 or 3 Core Flex Gold Effect

ElekTek Foot Press Switch in Line Push Button 65mm Diameter for 2 or 3 Core Flex White

ElekTek Switch Surround Frame Cover Finger Plate Contemporary Satin Chrome Silver Effect

ElekTek 65mm Diameter Ceiling Chandelier Plate with Hook Antique Brass

Pine Ceiling Wall Plinth Rose Surface Pattress Natural Pine 134mm 20mm Thickness

Elektek Back Plate Nipple Fitting 1/2-Inch Threaded Brass Boss 25mm Dia. With Screws for Lamp Bulb Holders

ElekTek B22 BC Batten Lamp Holder 52mm Diameter Base 3 Fixing Holes - Brass

Brass Safety Switch Lamp Holder 10MM BC B22 with Shade Ring *** Made in UK ***

80mm Lamp Shade Spring Clip Retainer for Glass Lamp Shades 3 Pack

ElekTek Ceiling Pendant Lamp Holder Cord Grip Suspension Flex Clamp BC B22 Antique Brass

Back Plate Nipple Fitting 10mm Threaded Brass Boss 25mm Diameter with Screws For Lamp Bulb Holders

Antique Brass Gothic Open Link Chain for Chandelier and Lighting 29mm x 15mm 2 Metre Pack

ElekTek ES E27 Lamp Bulb Holder Plain Skirt 10mm Entry Brushed Antique Brass Ideal for Vintage Filament Bulbs

ElekTek FAQs

Similar Brands

Brass Safety Switch Lamp Holder 10MM BC B22 with Shade Ring * Made in UK *