Apollo Valve feature image

Apollo Valve

Review rating Review rating Review rating Review rating Review rating 4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Apollo Valve range from £7.45 to £4704.11, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. On average, the Apollo Valve products cost around £1585.27. It is not a small expenditure for most consumers, so we recommend that you consider all aspects before making the purchasing decisions.

Apollo Valve offers a variety of products, there are 306 products available, 18 of which were analyzed in detail and recommended to customers. The Apollo Valve review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

Apollo Valve Best Sellers

Last Updated: 15 Jun 2023

Apollo 102S Series Bronze Gate Valve

Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use
Made of bronze for higher strength and corrosion resistance than brass
Top-mounted iron hand wheel for lowering and lifting the gate
Solder end connections on both ends for a semi-permanent connection to a piping system
200 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 125 psig for steam working pressure (SWP)

Apollo 101T-LF Series Bronze Gate Valve

Contains less than 0.25 percent lead by weighted average on wetted surfaces for potable water service
Made of bronze for higher strength and corrosion resistance than brass
Rising stem with inside screw lifts with the gate to signal visually when the valve is open
Female National Pipe Taper (NPT) threads for use with male threaded pipes
150 pounds per square inch (gauge) (psig) for cold working pressure (CWP)

Apollo 32-200 Series Bronze Ball Valve

T-handle for manual on/off control
Bronze for higher strength and corrosion resistance than brass
Solder ends for a strong and durable heat-joined bond using solder and a torch
RPTFE stem packing reduces risk of leakage
Maximum pressure rating of 400 psig for CWP and 125 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of 400 degrees Fahrenheit

Apollo 4ALF207T2 Bronze Reduced Pressure Zone Lead Free Valve

Corrosion resistant; internal sensing passage
Low head pressure loss; standard with apollo full port ball valves
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Apollo 4A206T2 Bronze Reduced Pressure Zone Valve

Reversible, removable chloramine resistant silicone seat discs
Maximum protection against back pressure and back siphonage
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Corrosion resistant

Apollo 4A107T2 Bronze Double Check Valve Assembly

Double check assembly (DCA) for backflow prevention
Bronze for higher strength and corrosion resistance than brass
Inline valve for connecting two pipes going in the same direction
Independently acting check valves for low pressure loss
Female NPT threads for connecting to male threaded pipe fittings

Apollo 87A-900 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of 500 degrees Fahrenheit
Full port flow for higher operating efficiency than standard port
Flanged connections for bolting to pipes

Apollo 87A-900 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of 500 degrees Fahrenheit
Full port flow for higher operating efficiency than standard port
Flanged connections for bolting to pipes

Apollo 87A-100 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Standard port for reduced valve size and cost
Maximum pressure rating of 250 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of -50 to 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo 87A-100 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Standard port for reduced valve size and cost
Maximum pressure rating of 250 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of -50 to 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo 87A-700 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Standard port for reduced valve size and cost
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of -50 to 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo 87A-700 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Standard port for reduced valve size and cost
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of -50 to 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo 87A-700 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Standard port for reduced valve size and cost
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of -50 to 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo 87A-700 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Standard port for reduced valve size and cost
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of -50 to 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo 87A-700 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Standard port for reduced valve size and cost
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of -50 to 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo 88B-140 Series Carbon Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Carbon steel for tensile strength and hardness
Stainless steel 316 ball and stem for resistance to corrosion
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo 88B-100 Series Carbon Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Carbon steel for tensile strength and hardness
Stainless steel 316 ball and stem for resistance to corrosion
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo 87B-100 Series Stainless Steel Ball Valve

Lever handle with vinyl sleeve for manual on/off control
Stainless steel for resistance to scaling and corrosion
Standard port for reduced valve size and cost
Maximum pressure rating of 150 psig for saturated steam; maximum vacuum pressure of 29 in Hg; maximum temperature of 500 degrees Fahrenheit
Flanged connections for bolting to pipes

Apollo Valve FAQs

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Apollo Valve is worth your consideration.

Most of the Apollo Valve products are produced by Conbraco Industries and Conbraco. The manufacturer provides Apollo Valve with a steady supply of products, and they have a good cooperative relationship with each other.