Huepar feature image

Huepar

Review rating Review rating Review rating Review rating Review rating 4.8

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Huepar range from £10.99 to £237.99, and the average price of all the products is about £66.59. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Huepar offers 102 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The Huepar review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

Huepar Best Sellers

Last Updated: 14 Jun 2023

Huepar LR-6RG Laser Detector only for Huepar Laser Level with Pulse Mode, Digital Laser Receiver detect Line Lasers Up to 60m/196ft for Red&Green Laser Beams, Three-Sided LED Display, Clamp Included

[AVAILABLE FOR RED AND GREEN PULSE LASER] - Turn on the Pulse Mode of the laser level, then Huepar LR-6RG laser receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 60m/196ft.
[HUEPAR DEDICATED RECEIVER] - Huepar LR-6RG receiver can ONLY use with Huepar Laser Level with pulse mode. Please note can NOT be used for Rotary Laser Level. Recommended for use in accompanied with Huepar 901CG/902CG, BOX-1G/R , GF360G/R, 621CG/R, 622CG/R, 602CG/R, 603CG/R Laser Level.
[PRECISE OPTICAL AND ACOUSTIC SIGNALS] - This laser receiver features a user-friendly interface and is smart in its simple design. Optical and acoustic signals help to locate the laser plane quickly and accurately. The LED indicator provides a clear and accurate signal. Beep sounds will remind you when you find the target.
[LONG BATTERY LIFE AND CLAMP HOLDER] - The receiver comes with a 9V dry battery, providing you with about 70 working hours. There is also an automatic shut-off feature that power down the device after about 8 minutes of being idle to extend battery life. The attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point.
[CLEAR MULTI-SIDED READOUTS] - Ergonomic design with display on the front, side and back of receiver, offers easier visual readout. This unit is outfitted with a dual-sided Bubble Vial on both the front and top, in order to more accurately determine the level.

Huepar BOX-1G Green Laser Level with Pulse Mode, 0.2mm Pro Accuracy, Switchable Cross Line Self-Leveling Line Laser, Large Fan Angle with 150 Vertical&130 Horizontal Laser Line, 360° Magnetic Base

[H&V SWITCHABLE] :One button operation makes it easy to select Cross lines, Horizontal or Vertical line. 4*AA alkaline batteries power this level for up to 5 hours of continuous use with both green beams on.
[RUGGED FOR OUTDOOR USE] :Full-time pulse mode allows for good outdoor visibility up to 150ft/45m at full brightness for maximum visibility. We used top German made green laser unit, currently rated as the best green laser unit in the word. It is 2 times brighter than red lasers utilizing the same power source. Huepar BOX-1G laser maintains consistently high performance in ambient temperatures as low as 14°F /-10°C.
[PACKAGE INCLUDED] :HUEPAR Box-1G Self-Leveling Laser, Easy-to-Adjust magnetic base, Target plate card, Carry pouch, Easy-to-understand Instruction Manual, 1 Yr. Limited Warranty with upgrade to 2 years with product registration.
[HIGH ACCURACY] :+/- 1/13 Inch at 33 feet, bright Class II laser 510nm wavelength, protected by whole TPR soft rubber design, makes Huepar laser level shock resistant, wear resistant and impact resistant.
[150°+ LARGE FAN ANGLE FOR VERTICAL BEAM] :An expansion angle of 150°+ easily projects a vertical line from the floor to the ceiling. The Portable Size makes it easy to carry and pack.

Huepar Self-Leveling Cross Line Laser, Adjustable Tripod Portable Lightweight Laser Level TPD05 Highest 50cm with 3-Way Swivel Pan Head, Quick Release Plate with 1/4"-20 Screw Mount, Bubble Level

[3-Way Flexible Pan Head] : Provide 360 degree Rotation Panoramas, allows you to rotate at any angle horizontally and vertically. The Built-in Bubble View Level can help you adjust the angle and accuracy.
[Quick Release Plate with 1/4"-20 Screw Mount] : Quick release plate with 1/4"-20 screw mount for fast device connection. Compatible with most Laser Levels, Digital Cameras, Lenses, most Camcorders, GoPro devices, Binocular, Telescopes etc.
[High Quality Camera Tripod] : The stable tripod for camera is made of anodized aluminum tube (max size 16.7mm) and ABS environmental plastic, very sturdy. The center column and center braces are made of aluminum for extra stability. If the tripod has any problem, please feel free to contact us for good solution. Become a member through the product registration, you can enjoy longer and better product warranty.
[Easy Operationg] : The tripod head's movement is controlled by a single positioning arm and a separate knob which allows for 90°vertical tilts. You can easily set the position at work without having to move the tripod.
[Adjustable 3-Section Legs and Center Column] : Three-section legs height adjustment buckle, extended center column to meet your different needs. 0.2m-0.5m height range, 4kg load capacity. Net weight only 0.37kg, light-weight but durable. Easy to carry and transport in a storage bag.

Huepar Laser Distance Measure 328Ft/100M with Li-ion Battery&Electric Angle Sensor, Backlit LCD Laser Measure M/In/Ft with Multi-Measurement Modes, Pythagorean, Distance, Area&Volume-LM100A Indoor Use

MULTIPLE MEASUREMENT MODES: This laser distance measure delivers angle, area, distance, volume, Pythagorean measurement modes. Featuring continuous measurement, addition and subtraction, calibration, automatic calculation of area and &volume and 30 groups data memory function, it is ideal for home and construction or industries applications.
BUILT-IN LI-ION BATTERY & ELECTRIC ANGULAR SENSOR: Powered by a large-capacity Li-ion battery, laser measure offers remarkable runtime for all-day jobs and can work up to 8000 times when fully charged. There is no need to replace the battery frequently making your work more efficiently. Equipped with electronic angular sensor, laser distance meter delivers higher accuracy and faster angle measurements compared to bubble level meters.
HIGH ACCURACY & UNIT SWITCHABLE: distance measure features long-range measuring with extreme accuracy and can measures distances up to 328Ft(100m) within 1/13-inch(2mm). The tool can measure from front/middle/rear reference points making it easy to measure in different scenarios. All measurements are displayed in real time and can be switchable among M/In/Ft freely.
DURABLE ROBUST DESIGN: laser distance measure is IP54 rated to withstand tough working environments. It features small dimensions and a handy pocket-size design so this laser measure can fit in any pocket. 1/4 inch threaded mount enables it to be attached to tripod or other tools for use. Package Contents: 1 x Laser Distance Meter, 1 x Reflector, 1 x Hand Strap, 1 x USB cable,1 x Bag, 1 x User Manual, 1 x Carrying case
BACKLIT LCD AND MUTE SETTING: Large backlight screen provides users with a better visibility in low-light or no-light working conditions. Automatic shutdown without operation 150s.Mute setting allows users to adjust the volume freely which is suitable for using in library, classroom and other quiet places.(This laser measure is designed to be used on a dim lighted area or indoor job sites. To use it outdoors, make sure that it is not on direct sunlight)

Laser Level, Huepar Self-Leveling Laser Level with Green Beam Cross Line Laser-Vertical and Horizontal Line, 100ft Alignment Laser Tool for Picture Hanging and DIY Application, Battery Included-B011G

SELF-LEVELING & MANUAL MODE - Self-leveling within 4°, laser beams will blink continuously when the tool is beyond self-leveling range. Once pendulum locked, the cross lines will be locked in position for use at any angle.
GREEN CROSS LINE LASER - Huepar cross line laser level adopted advanced green laser technology. Green laser is 2 times brighter than red laser with the same light source. This laser tool projects one 110° Horizontal and one 110° Vertical line for wide applications of leveling and alignment tasks. Huepar cross line laser tool is great for installing photo, door, window, or furniture carpentry, hanging wallpaper, etc.
HIGH PRECISION - The level tool projects cross laser line with an accuracy of 1/9 inch at 33 feet and full brightness of optimal visibility. Self-leveling time is less than 3 seconds. 1/4"-20 thread mounts allows you to use it with a tripod (not included) and adjust its height easily to make measuring flexible and stable.
DURABLE AND WIDELY USED - This self-leveling line laser reaches IP54 protection grade, it is waterproof, dustproof, shockproof, wear resistant, impact resistant, and can bear cold and high temperature. You can think of to carry out work for all trades from drop ceiling installation, lighting fixtures, photo frames aligning and wall tiling down to floor tiling etc.
COMPACT AND EASY OPERATION - B011G laser level is compact and lightweight for easy gripping, it is the most handy and professional laser tool you can think of to carry out work. It is simple to use with only one operation button, which is easy to switch modes and guarantee fast and error-free work, making your life more efficient and simple.

Huepar 9300G 3-Points Laser Level, Self-Leveling Green Laser Level with Plumb Points for Soldering and Points Reference Positioning, 60m Working Range, Floor Stand, Magnetic Bracket Included

[Bright and Visible Reference Points] : Equipped with OSRAM laser unit provides bright green laser and stable performance. Bright green laser spots provide good visibility in bright working environments, which can help for leveling window and balcony, bricklaying, wall and railing construction, measuring whether the wall is vertical. Can also be widely used in construction, HVAC, electrical engineering, steel bolt frames, etc.
[3-Point Laser Level] : Huepar 9300G laser level projects two plumb points and one front point for fast, accurate layout of reference points positioning with the accuracy of 3mm at 10m. The laser tool will provide a lot of help in the decoration work, such as Hanging chandeliers and ceiling fans, Installing closets, Installing lighting systems, pipes systems and electrical outlets, etc. Unit points up/down and front to add squaring to plumb, level and align capabilities.
[Warranty & Package] : It comes with 12 months limited warranty but up to 24 months warranty if becoming a royal customer through product registration (Offered on the package box). Package includes Huepar 9300G 3-Point Laser Level, 360° Rotating Floor Stand, L-shape Magnetic Base, Laser Target Plate, AA Batteries, Carrying Case, User Manual.
[Efficient Layout & Smart Pendulum] : The 3-point laser level offers precise positioning and transfer of points.With the quick-setting pendulum, the traditional plumb bob is able to stop without redundant waiting. Under self-leveling mode, the laser tool can self-level in 3 seconds and indicates out-of-level condition within 4°. Activate the manual mode to lock laser beam for using at any angle by locking the pendulum.
[Easy to use] : With 1/4"-20 and 5/8"-11 female threads, the laser tool can be mounted on tripods or support poles. 360° Rotating Floor Stand helps position between ceiling and floor, as well as fix and layout the front point. The L-shape magnetic wall bracket can easily and stably mount the laser level to steel. Screw mounting holes on the bracket can help to be nailed to the wood or wall. The target plate helps to position and mark.

Huepar PV3 L-Shape Magnetic Bracket Base for Huepar Laser Level, Multifunctional Fully-Adjustable Magnetic Pivoting Base to 180 Degree for Tripod/Wall/Ceiling Mount, Standard 1/4"and 5/8"Thread

Multifunctional: Adsorption, Hanging, Bind with a rope, adjustable angle up to 180 Degree. There is hole under the base, fitting for the laser point. 1/4" male thread mounts to laser level device, 5/8" female thread mounts to tripods, holes fit for the laser point.
Strong Magnet: 2 large pot magnets with all fittings for attachment to the wall mounts form a strong magnetic support, it can be used on the metal surface without tripods. Or hanging it on the nail or screws by the back slots.
This small accessory raise the beam to your exact desired reference height. TPR soft rubber on all sides protects the level from shock resistant to some extent.
Package includes: 1*Magnet Bracket Adapter for laser level. Customer can enjoy 12 months replacement warranty and 30-day money back guarantee. If you have any questions about the product, please contact us.
Ideal for mounting Huepar, Levelsure, Leica, Bosch, Hilti, Dewalt Laser levels,etc.

Huepar 3 x 360° Laser Level Green 3D Self-Leveling Cross 12 Lines Laser Level Three-Plane Leveling and Alignment Laser Tool, Rechargeable Li-ion Battery with Type-C Charging Port & Hard Carry Case

[High Visibility & Accuracy] : The green laser level line is 4x brighter than the red beam to assist your leveling jobs, brighter and clearer. High accuracy of ±3mm at 10M with a working range of up to 98 feet (300LUX). The brightness of the laser can be adjusted according to the working needs. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, extending the laser range up to 197 feet with Huepar Line Laser Detector.
[Dual Modes & Self-Leveling] : The 360 laser level with slide switch enables you to set 2 modes, self-leveling mode, and manual mode. When working in a self-leveling mode, the range of leveling and compensation is 3.5°and the laser level will automatically level for cross line, otherwise, the laser will flash to indicate the out-of-level condition. In manual mode, the self-leveling function is deactivated and the laser tool is locked to use the laser lines at any angle.
[Package Contents] : 1x 703CG Laser Level Tool with integrate magnetic bracket, 1x Portable Bag, 1x Laser Target Plate, 1x Type-C cable, 1x User Manual. Combined with Amazon's excellent delivery service, we provide a 2-year after-sale service and lifetime technical support. Please feel free to contact us if you have any concerns
[Flexible Installation Method] : Equipped with an integrated L-shaped magnetic bracket, which is easy to fix on the metal surface and realizes 360° rotation. The laser level with bracket is also available with 1/4"-20 & 5/8"-11 mounting thread to suit standard tripod or laser pole mounting. The laser windows can be removed and replaced with a screwdriver.
[Advanced Protection and Long Working Time] : Class 2 (IEC/EN60825-1/2014),

Huepar M-9011G Green Laser Level Cross Line Self Leveling Large Fan Angle 110 Horizontal + 110 Vertical Cross Green Beam Laser Lines Class 2 Standard with Magnetic Pivoting Base

[PORTABLE AND HANDY] - With its soft-grip, light weight and PALM-SIZED design, the 9011G is the most handy and professional laser tool you can think of to carry out work for all trades from drop ceiling installation, lighting fixtures, photo frames aligning and wall tiling down to floor tiling etc. A real dream home improvement tool comes in handy, but NOT recommended for outdoor use.
[BRAND NEW GREEN BEAM] - Huepar's green beam laser use lastest Germany technology, which is twice brighter than red laser under same power source, but NOT recommended for outdoor use. One button control make it easily to project a bright green cross line on 110 degrees large fan angle to assist your leveling jobs.
[SELF & MANUAL LEVELING] - Unlock the pendulum, Self-leveling Mode is enabled. The laser cross line beam will blink continuously when the tool is beyond self leveling range 3.5° ± 0.5°. Once pendulum locked, it switches to Manual Mode to lock lines for use at any angle. Ideal for installing lighting fixtures, hanging pictures, wall tiling or floor tiling, etc.
[MAGNETIC PIVOTING BASE] - Strong Magnetic L mount with tripod thread can attaches the laser to any steels easily, turning around 360-degree depending on your needs.
[FINE POSITIONING] - Projects a laser cross with an accuracy of ±3mm at 10m and full brightness for optimal visibility; Self-leveling time less than 3 seconds; 1/4 -20 thread mounts allows you to use it with a tripod (not included) and adjust its height easily to make measuring flexible and stable.

Huepar 3D Cross Line Self-Leveling Laser Level 3 x 360 Green Beam Three-Plane Leveling and Alignment Laser Tool, Li-ion Battery with Type-C Charging Port & Hard Carry Case Included - B03CG Pro

Dual Power Methods & Type-C Charging Port: Huepar B03CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.
Fully Layout with 3 x 360° Line Lasers : One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.
More Installation Methods: The laser level comes with 1/4"-20 thread to suit for standard tripod or laser mounting pole. Equipped with a magnetic pivoting base, the laser tool can be rotated to the required angle. And the 1/4"-20 & 5/8"-11 mounting threads help mount it to different tripod threads. Two strong magnets allow for attachment to metal track and steel. Two nail holes for more fixing methods when working. The laser windows can be removed and replaced with a screwdriver.
Durable Design & Package Contents: The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection. IP54 water/dust resistance ensures you work well in hazardous working conditions. The kit comes with a hard carry case bringing much more convenient to carry and store the laser tool. Package includes Laser level, Li-ion battery with type-c charging port, Magnetic bracket, Type-C power cord, Power adapter, Target plate, User manual.
Brighter Green Laser & Outdoor Pulse Mode: This cross line laser adopts the bright Osram's green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 200 feet with Huepar Line Laser Detector.

Huepar Bluetooth 4x360 Laser Level Set, LCD Green Laser Level with Pulse Mode, 16 Lines Self-Leveling Cross Line Laser Level, Triple Power Supply (S04CG-5RG)

LCD DISPLAY&BLUETOOTH TECH: The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously.
4 X 360° LINE LASERS & PULSE MODE(RECEIVER INCLUDED): This laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver included in the kit.
TRIPLE POWER METHODS & TYPE-C CHARGING PORT: This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc.
MULTIFUNCTIONAL LASER TOOL: The four 360° laser planes can be selected individually by separate H and V button on the keypad. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of self-leveling range ±3.5°. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.
MAGNETIC BRACKET&DURABLE DESIGN: Strong magnetic bracket allows for quick positioning to metal surfaces. And the 1/4"-20 & 5/8"-11 mounting threads on the bracket enable to mounted to different tripod threads. The laser tool also has a 1/4"-20 mount thread to suit a tripod or pole mount. IP54 water/dust resistance can withstand tough job site conditions. The kit has a hard carry case bringing much more convenience to carry and store the laser tool.

Huepar Laser Level Self Leveing 3D Green Beam Three-Plane Leveling and Alignment Self-Leveling Laser Tool 2 Li-ion Batteries with Type-C Charging Port & Magnetic Bracket, Hard Carry Case - LS03CG

OUTDOOR PULSE MODE: This laser level projects green laser beam which is 4 times brighter than standard red beams with a working range up to 30m/98Ft of an accuracy +/- 3mm/10m/(+/- 1/9" at 33Ft). Besides highly visible green beam, an outdoor pulse mode extends laser working range up to 60m/197Ft with Huepar LR-5RG/LR-6RG Line Laser Receiver in bright light or outdoor conditions.
Huepar Laser TWO LI-ION BATTERIES & TYPE-C CHARGING: This laser level comes with 2 5200mAh Li-ion batteries for convenient replacement and continuous use. When the battery is exhausted, you can directly plug in the charger and the laser level can be used normally. 4 battery indicators on the Li-ion battery allow users to know the current battery level and charging status. With Type-C charging port, the batteries can also be charged by phone, laptop, power bank, car charger, etc.level
PACKAGE CONTENTS & WARRANTY: The kit comes with a hard carry case bringing much more convenience to carry and store the laser tool. The kit also includes 2 Li-ion batteries, magnetic bracket, type-c power cord, power adapter, laser target plate, user manual. Huepar is committed to providing Best-in-Class service to our customers- 24/7 Service Team(response in 24hrs & solution in 48hrs); Lifetime Customer Support(hassle-free of exceeding the warranty).
MULTIFUNCTIONAL LASER TOOL: The one 360° horizontal and two 360° vertical laser lines can be selected individually by separate H and V button on the keypad. With our smart pendulum system, this line laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.
Fully Layout with 3 x 360° Line Lasers: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room, provides an all-in-one level and alignment solution for one-person job setup. Three laser lines cross at 90°angles makes user quickly visualize and finish square layout. The laser tool quickly arranges and squares room layout with three 360° laser lines.

Huepar Professional Ceiling Clamp - Fine-Tuning Bracket Laser Level Adapter - Adustable Magnet Bracket with Adjustable Clip - 360° Adjustable Support with 1/4"-20 Male Threaded - PV10+

[1/4"-20 male thread] : The bracket with 1/4"-20 male thread, the maximum depth from the 1/4''-20 thread to the back of the bracket is 8.5cm. It is compatible with most cross line laser levels with 1/4" female thread. If your laser level has a 5/8" female thread, please purchase the conversion screw adapter AD5/8 separately (ASIN: B07QCSTFVW).
[Multi-directional Fine-tuning Bracket] : There are four fine adjustment knobs on the bracket, help to adjust the left and right position within 3cm, the front and back position within 5.5cm, the height within 9 cm, and the horizontal rotation 360°. An added locking knob enables to fix the working height and avoid sliding up and down. The graduations are marked in inches and centimeters for easy readouts.
[Multiple Installation Methods of the Bracket] : 1/4"-20 and 5/8"-11 female thread makes it possible to be attached to a tripod or laser pole. With the strong magnets, the bracket can be attached to the back clip at any height or other metal surfaces. Slots for screws, nails, raceways or optional straps are designed to make the installation much firmer. Huepar PV10+ Positioning Bracket is ideal for any job site.
[Multi-functional Auxiliary Back Clip] : A separate back clip included in the kit is compatible with most magnetic bases on the market, increasing the adsorption force of the magnets and stability. The Back Clip offers the ability to mount to any object up to 5cm thick. The vertical angle against the wall can be adjusted by the fine-tuning knobs as well as the opening size of the clip. A nail hole in the clip enables to be fixed firmly on the wall.
[Huepar Dedicated Laser Window Adapter] : A dedicated adapter included helps to hang the laser tool, bringing the laser window closer to the wall. At this time, the bracket can be inverted or flipped sideways. The fine-tuning knob on the adapter is for adjusting pitch angle. Due to the special design of the groove, Huepar adapter is only suitable for certain models: Huepar 901CG/R, 902CG/R, 903CG/R, GF360CG/R, B02CG/R, B03CG/R, B21CG/R.

Huepar 2-in-1 Laser Tape Measure, 197Ft Rechargeable Laser Measurement Tool & 16Ft. Measure Tape with Backlit LCD & Movable Hook -Pythagorean, Area, Volume, M/In/Ft Unit Switch Digital Distance Meter

TYPE-C CHARGING & AUTO SHUTDOWN: The tape measure adopted built-in 380mAh lithium battery so that the laser tape measure can be rechargeable, which is economical, environmental-friendly and durable. With Type-C charging port, the tape measure can also be charged by phone, laptop, power bank, car charger, etc. In addition, the laser measurement tape will automatically shutdown without operation after 180s.
2-IN-1 LASER MEASUREMENT TOOL: This laser tape measure combines a 197Ft (60 m) laser measure with a 16Ft (5 m) tape measure, which is a fully functional measurement tool. This measuring tape features an accuracy of ±1/16 inch. The laser measuring tape adopted Laser Class II which is limited to 1 mW continuous wave, safe for everyday use.
PORTABLE&WIDE APPLICATIONS: The digital tape measure is made of durable ABS material for comfortable grip. And with belt clip, users can easily carry it everywhere for use. This Huepar 2-in-1 laser tape can be widely use in house decoration, building construction, real estate .The laser measure is ideal for measuring areas or objects including rooms, apartments, buildings, factories, garage, desks, chairs, sofa, closet, floor, etc.
EASY OPERATION LASER TAPE: The digital laser tape measure has both metric and imperial scales on the tape for easy reading. Movable hook improves accuracy for measurement of inside and outside. The brake lock helps control the tape recycling speed for safe measuring. Backlit LCD improves better readability in low-light conditions.
6 LASER MEASURE MODES & MULTI FUNCTIONS: The laser measurement tool supports distance, area, volume, Pythagorean(2-point), Pythagorean(3-point) and continuous measurement modes for various usage scenarios. It can also do calculations in area and volume measuring. Two measuring reference points (the front and the rear) meet different measuring needs. There are four units for selected: m/ft/in/' ‘'. The laser tape offers 50 groups of data storage.

Huepar Fine-Tuning Bracket Laser Level Mount, Multifunctional Magnetic Pivoting Base, 360° Rotation - Alternative to a Standard 1/4" and 5/8" Thread & Height Adjustment-PV11

HUEPAR DEDICATED LASER WINDOW ADAPTER: A dedicated adapter included helps to hang the laser tool, bringing the laser window closer to the wall. At this time, the bracket can be inverted or flipped sideways. Due to the special design of the groove, Huepar PV11 adapter is only suitable for certain models: Huepar S02CG, S03CG/S03CG-L, S03DG/S03DG-L, S04CG/S04CG-L, P02CG, P03CG, P04CG
POSITIONING DEVICE FOR LINE LASERS: The bracket with 1/4"-20 male thread, the maximum depth from the 1/4''-20 thread to the back of the bracket is 9cm. It is compatible with cross line laser levels with 1/4" female thread. If your laser level has a 5/8" female thread, please purchase the conversion screw adapter AD5/8 separately.
MULTIPLE INSTALLATION METHODS OF THE BRACKET: 1/4"-20 and 5/8"-11 female thread makes it possible to be attached to a tripod or laser pole. With the strong magnets, the bracket can be attached to the back clip at any height or other metal surfaces. Slots for screws, nails, raceways or optional straps are designed to make the installation much firmer. Huepar PV11 Positioning Bracket is ideal for any job site.
MULTI-DIRECTIONAL FINE-TUNING BRACKET: There are four fine adjustment knobs on the bracket, help to adjust the left and right position within 0.8cm, the forth and back position within 5.5cm, the height within 9.5 cm, and the horizontal rotation 360°. An added locking knob enables to fix the working height and avoid from sliding up and down. The graduations are marked in inches and millimeters for easy readouts.

Green Laser Enhancing Glasses - Huepar GL01G Adjustable Eye Protection Safety Enhancement Glasses for Green Laser Level Alignment, Cross & Multi Lines (Protective Box Included)

[Reduce Eye Pressure] : Filter glasses GL01G can help you filter light in other colors besides green in nature. If you feel eye fatigue from the bright or flashing laser beam, wearing glasses help relieve eye pressure.
[Improved Laser Visibility] : When the power of the laser tool is weak and the laser beam is dark, wearing the glasses GL01G can increase the visibility of the green laser line or the green laser point to some extent. (Please note these laser glasses can only for better visibility, not for protection.)
[Ultralight Design and Good Durability] : Adopt ultra-light plastic, the weight of the glasses is only 18g, no pressure for long time wearing and ensures maximum comfort.
[Two holes for convenient use] : Spectacle head safety strap cord holder keeps your glasses secure around your neck, allowing it to be hung on your chest,wall or other things, or rest on top of your head for convenient use.
[Adjustable frame - for wearers of glasses] : The length of the arms is adjustable for 4 modes by about 2 cm (9 - 11.4 cm). The side and nose pieces fit perfectly without the slipping by adjusting the length of the arm. The GL01G glasses are large enough to wear over regular eyeglasses.

Digital Angle Finder, Huepar 0-360° Digital Level Box Angle Gauge with V-Groove Magnetic Base&Backlight LCD Bevel Gauge Protractor Inclinometer for Carpentry, Building, Masonry, Automobile, Masonry

BACKLIGHT LCD DISPLAY & EASY-TO-READ: The Digital Angle Gauge has a large LCD display with backlight, which provides accurate, quick and clear measurements. Users can easily read the measurements even in dark environment. The backlight can be switched on and off freely. Also the Display will be inverted Automatically when the tool is upside down. In addition, this digital level tool will automatically turn off after 5 minutes of no operation to save battery.
HIGH ACCURACY&FOUR UNITS: 0.1°at 0° ~90° , ±0.2° at other angles with the resolution 0.05°. It is designed with a wide measuring range of 4*90°(0~360°). There are four selections of measuring units, degree(°),percentage(%), mm/m, in/ft, which can meet various working demands. This digital angle inclinometer provides convenience in woodworking, construction, machinery, telecommunications, automobile etc.
PORTABLE&PACKAGE CONTENTS: In compact size, this angle gauge can fit into tight spots to get perfect measurements needed. With handy design and a portable pouch, this sturdy precision tool can be taken to anywhere. Users can install the battery easily with the included screwdriver. The package contents include 2 x AAA batteries, a screwdriver, a portable pouch with belt loop, user manual.
MAGNETIC V-GROOVE BASE&EASY MARKING: With its powerful magnetic V-groove base at the bottom, this digital bevel gauge can easily and firmly attach to miter saw, band saw, table saw blades, metal poles and even round pipes. You can also use it on fences, tables, and other metal surfaces. Thanks to its strong magnet, there's no need to worry about holding the tool in place while taking measurements. And the groove lines on the left and right sides are convenient for marking when measuring.
HOLD&ZERO FUNCTION: The current measurement value can be held on the display by short pressing the HOLD switch. The zero function enables users to set relative zero angle at any reference surface. The built-in level bubble vial on the top is designed for leveling work without battery.

Huepar self-Leveling Cross line Laser, Adjustable Tripod Lightweight Laser Level TPD14 56"/143cm with 3-Way Swivel Pan Head, Quick Release Plate with 1/4"-20 and 5/8"-11 Screw Mount, Bubble Level

[Flexible 3-Way Pan Head] : Provide 360 ​​degree rotation panoramas, allows you to rotate at any angle horizontally and vertically. The movement of the tripod head is controlled by a single positioning arm and a separate button that allows for 90° vertical tilts. Built-in bubble sight level can help you adjust the angle and accuracy.
[1/4"-20 Screw Mount Quick Release Plate] : With quick release plate, a 1/4"-20 UNC can be converted to 5/8"-11 UNF adapter nut, you can work with laser levels, digital cameras, etc.
[Multi-Function Hook & Rubber Swivel Feet] : Large swivel rubber feet help stand firmly on the ground and adjust angles and directions for different floor conditions and usage. The multi-function hook allows you to hang additional weight for greater stability. Suitable for outdoor or complex ground work or shooting.
[High Quality Camera Tripod] : The stable camera tripod is made of anodized aluminum tube (maximum size 23mm) and environmental ABS plastic, very strong. The center column and center braces are made of aluminum for greater stability. If the tripod has any problem, please feel free to contact us for a good solution. Become a member through product registration, you can enjoy a longer and better product warranty.
[4-Section Adjustable Legs & Center Column] : Four-section leg height adjustment buckle, extended center column to meet your different needs. Height range of 0.48m-1.43m, load capacity of 10kg. Net weight only 1.16kg, light but durable. Easy to carry and transport in a storage bag.

Huepar AT2 Bracket Laser Level Adapter - 360° Rotating Base for Line Laser Level Tripod Connector, with Standard 1/4" Threaded Mount, Manually Operated Micro - Adjust Fine Turning Pivoting Base

[HEIGHT ADJUSTABLE] : Users can adjust the height by rotate the three leg of the adapter even on a tilt surface. This small accessory raise the beam to your exact desired reference height. The 1/4" male thread mounts to laser level device, 5/8" female thread mounts to tripods.
[MICRO KNOB FOR 360°ADJUSTMENT] : Three micro rotary knobs enable to make 360° adjustment while working. The X-axis knob and Y-axis knob help the user adjust the horizontal position front and back, left and right. And quickly align circular bubbles to level the machin.
[WIDE APPLICATIONS] : Huepar AT2 adapter can be connected to any device that features a 1/4" male thread. Such as Huepar 901CG/902CG, 9011G/9211G, GF360G/R, BOX-1G/R, 8211G/8300G, 621CG/R, 622CG/R, 602CG/R, 603CG/R Laser Level. Also ideal for mounting Leica, Bosch, Hilti, Dewalt Laser levels,etc.
[PACKAGE INCLUDES] : 1 * Magnet Bracket Adapter for laser level. Customer can enjoy 12 months replacement warranty and 30-day money back guarantee. If you have any questions about the product, please contact us.
[OVER-MOLDED METAL DESIGN] : This adapter is made of durable aluminum material and can withstand wear and impact of the job-site. TPR soft rubber on all sides protects the level from shock resistant to some extent. Three sharply tapered feet for a variety of construction sites.

Huepar FAQs

You can purchase Huepar products from the seller Huepar EU, over the last 12 months, the seller has received honest feedback from 128 consumers, and the average rating is 4.81. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Huepar is worth your consideration.

Most of the Huepar products are produced by Levelsure, Leiwotec, and LEVELSURE. The manufacturer provides Huepar with a steady supply of products, and they have a good cooperative relationship with each other.