Skip to content
NACX feature image

NACX

4.3
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the NACX range from £15.42 to £26.24, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. NACX provides their products for a reasonable price, which means the products cost around £17.95 on average. They are affordable options to make your shopping much easier.

NACX offers a variety of products, there are 207 products available, 17 of which were analyzed in detail and recommended to customers. If you find yourself hesitating about a purchase, check out our thorough NACX review to see what the best picks are.

Share

NACX Best Sellers

Last Updated: 15 Jun 2023

Metric DIY Washers Brass DIY Washers

Brass Flat Washer, M2.5 Metric Bronze Washer for Screws Bolts, DIN 934, 2.5mm ID, 5mm OD, 0.5mm Thick (Pack of 300)

Brass Flat Washer, M2.5 Metric Bronze Washer for Screws Bolts, DIN 934, 2.5mm ID, 5mm OD, 0.5mm Thick (Pack of 300) Cover
  • Material: brass, high hardness, wear resistance.
  • Size: 2.5mm x 5mm x 0.5mm/ 0.09” x 0.19” x 0.01” (inner diameter x outer diameter x thickness)
  • Prevent nuts, bolts or screws from passing through the material.
Buy on Amazon Find on eBay

4 Way Pneumatic Manifold Air Distribution Block, G1/2 Supply Port, G1/4-Inch Output Port, Aluminum Alloy

4 Way Pneumatic Manifold Air Distribution Block, G1/2 Supply Port, G1/4-Inch Output Port, Aluminum Alloy Cover
  • Two G1/2" inlet ports and four G1/4" outlet ports.
  • Air manifold for distributing pneumatic power to multiple locations from a single source.
  • It is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch.
Buy on Amazon Find on eBay
Hole Saws

14mm TCT Hole Saw, 9/16” Cutting Diameter Tungsten Carbide Tipped Hole Cutter Opener, for Stainless Steel Metal Plate Aluminum, 2Pcs

14mm TCT Hole Saw, 9/16” Cutting Diameter Tungsten Carbide Tipped Hole Cutter Opener, for Stainless Steel Metal Plate Aluminum, 2Pcs Cover
  • Well made of high speed steel, with extremely sharp blade, low consumption and durable, provided impact resistance, wear resistance.
  • Tungsten carbide-tipped cutting edges last longer and can be run at higher rates and speeds, cutting diameter is 14mm(9/16"), effective depth is 25mm(1”).
  • Integrated design: including drill bit, spring, hex wrench. Split point pilot drill bit prevents the bit from walking.
Buy on Amazon Find on eBay
Brass Wire Brushes Wire Brushes

45 Pieces Brass Wire Brushes Wheel Cup Pen Brush Set Polishing Attachment Kit for Dremel Grinder Rotary Tools (Gold)

45 Pieces Brass Wire Brushes Wheel Cup Pen Brush Set Polishing Attachment Kit for Dremel Grinder Rotary Tools (Gold) Cover
  • Material: the brush wire is made of brass for durability and long service life. It is suitable for polishing, rust removal, paint removal, burr removal, stain removal and surface cleaning.
  • Shank Diameter: 3mm(1/8”); Wheel Shape Brush: 25x40mm/1"x1.57"(Diameter*Length); Cup Shaped Brush: 20x50mm/0.78"x2"(D*L); Pen Shaped Brush: 7x50mm/0.27"x2"(D*L)
  • Practical Tool: these wire brushes remove burrs, rust, dust, remove oxide layers, scale and paint in hard-to-reach areas.
Buy on Amazon Find on eBay
Hex Wood Screws Phillips Wood Screws

M4 x 16mm Stainless Steel Hex Socket Spring Ball Point Grub Screws 20pcs

M4 x 16mm Stainless Steel Hex Socket Spring Ball Point Grub Screws 20pcs Cover
  • Material: SUS304 stainless steel, The combination of element forms a layer of dense oxidation covering film on the material surface, which is wear-resistant, rust-proof and anticorrosive.
  • Size: Diameter: 4mm/0.15”; Thread Length: 16mm/0.62”; Pitch: 0.8mm/0.03”
  • Thread: Screw thread has the function of fastening, the spiral section is smooth, no residual, no burr, the thread is neat and clear.
Buy on Amazon Find on eBay
Drill Bits for Wood HSS Drill Bits

16mm(5/8-Inch) Reduced Shank Drill Bit, 1/2” Shank High Speed Steel Twist Drill Bit HSS-9341 for Aluminum Plate Copper Wood Stainless Steel

16mm(5/8-Inch) Reduced Shank Drill Bit, 1/2” Shank High Speed Steel Twist Drill Bit HSS-9341 for Aluminum Plate Copper Wood Stainless Steel Cover
  • High speed steel (type: 9341) is designed to ensure sharp and fast execution in metal material for clean results. 
  • Specific Size: Cutting Bit Diameter: 16mm(5/8”); Shank: 10mm(0.39”); Length: 157mm(6.18”)
  • Surface treatment of nitriding makes it durable, withstand heavy duty operation for long service life. 
Buy on Amazon Find on eBay
Drill Bit Sets

Set of 10pcs 3mm 1/8 Inch Shank HSS Rotary Bits Burr for Engraving Carving Woodworking Tool

Set of 10pcs 3mm 1/8 Inch Shank HSS Rotary Bits Burr for Engraving Carving Woodworking Tool Cover
  • [Features] Fast chip, high hardness, suitable for wood, aluminum, plastic root carving and engraving.
  • [Manufacturing Process] For processing of metallic and non-metallic surfaces using an engraving machine or mini-drill various forms of cutting part provide efficient processing of materials length is 39mm(1.53"), shank diameter is 3.1mm(1/8").
  • [Suitable Tools] Hanging mill, electric mill, drill, grind and clamp rod machine can be used.
Buy on Amazon Find on eBay
Router Cutter Bits Router Guide Bushes

1/2-inch Shank, 5/16-inch Cutting Dia, 2-Flute, Carbide Tipped Groove Round Nose Core Box Router Bit 4Pcs (1/2 x 5/16)

1/2-inch Shank, 5/16-inch Cutting Dia, 2-Flute, Carbide Tipped Groove Round Nose Core Box Router Bit 4Pcs (1/2 x 5/16) Cover
  • Professional grade carbide core box router bit.
  • Size: 1/2-inch steel shank, 5/16-inch cutting diameter, 5/32-inch cutting radius
  • The bit features a high quality carbide that removes material more efficiently, each bit is made of high quality steel for added durability and long life.
Buy on Amazon Find on eBay
Lawn & Garden Sprinklers

0.4mm Garden High Pressure Spray Misting Nozzle Atomizing Nozzle, Thread Brass Misting Nozzles for Patio, Landscaping, Greenhouse, Dust Control, Outdoor Cooling System, 10Pcs

0.4mm Garden High Pressure Spray Misting Nozzle Atomizing Nozzle, Thread Brass Misting Nozzles for Patio, Landscaping, Greenhouse, Dust Control, Outdoor Cooling System, 10Pcs Cover
  • Made of high quality brass which is rust proof and durable, long service life.
  • 0.016'' Orifice (0.4 mm), working pressure 20-70kg/m, spray quantity 95-178cc/min.
  • The barbed edge provides good connection Deeper and smoother thread design makes the work easier and more efficient.
Buy on Amazon Find on eBay
Reamer Bits

Taper Pin Reamers, 3-13mm Bridge Pin Hole Hand Held Reamer T Handle Tapered 6 Fluted Chamfer Reaming Woodworker Cutting Tool (1/8-1/2)

Taper Pin Reamers, 3-13mm Bridge Pin Hole Hand Held Reamer T Handle Tapered 6 Fluted Chamfer Reaming Woodworker Cutting Tool (1/8-1/2) Cover
  • This high-quality reamer creates holes of precise size up to 16mm diameter on metal, wood or plastic.
  • Constructed of steel with T-handle for added leverage. Suitable for drilling, expanding holes, bridge pins, end pins.
  • The hole reamer is made of hardened steel, enlarging holes with its ground steel cutting edges.
Buy on Amazon Find on eBay
Steel Centre Punches Wood Centre Punches

Center Puncher, Brass Spring Loaded Center Drill Bit, Automatic Center Punch with Cushion Cap for Wood Steel Plastic, Black, 2 Pack

Center Puncher, Brass Spring Loaded Center Drill Bit, Automatic Center Punch with Cushion Cap for Wood Steel Plastic, Black, 2 Pack Cover
  • [Features] Adjustable ball end buffer caps increase and reduce hitting power and allow a comfortable grip, making the center punch easier to use.
  • [Material] Central punch made of high speed steel, strong impact resistance, wear resistance and rust prevention, prolong the life of punch, high speed steel hardness. Metal, wood, glass, canvas, plastic and leather materials using this automatic center press.
  • [How to Use] Use heavy head to align anchor points.Push the handle hard, then press toward the punch.After pressing the punch back into the rod for a short time, a strong spring will force the punch to eject.
Buy on Amazon Find on eBay
Nut & Bolt Sets

M4 x 5 mm x 5 mm Thread Brass Insert Embedment Nut, Female Knurled Insert Nut, 100Pcs

M4 x 5 mm x 5 mm Thread Brass Insert Embedment Nut, Female Knurled Insert Nut, 100Pcs Cover
  • [Material] Made of brass which is anti-corrosive and durable.
  • [Dimension] Copper; Inner Diameter: 4mm / 0.16'' ; Outer Diameter: 5mm / 0.20”; High:5mm/ 0.20''
  • [Installation] These threaded insert nuts can be installed into threaded tapered holes by ultrasound or heating, or molded during the injection process. There are guide rails in the inserts, countersunk holes are not required.
Buy on Amazon Find on eBay

4mm Quick Fitting, 5/32” OD Push to Connect Pipe Tube Straight Fittings, Pneumatic Air Line Connector 10Pcs (White)

4mm Quick Fitting, 5/32” OD Push to Connect Pipe Tube Straight Fittings, Pneumatic Air Line Connector 10Pcs (White) Cover
  • Pressure Range: 0-0.9MPa(0-9.2kgf/cm²); Max Working Pressure: 1.32MPa(13.5kgf/cm²); Environment and Fluid Temperature: 0-60℃.
  • Product Name: Straight Quick Fitting; Model: PU-4; Connect Tube Size (OD): 4mm(5/32")
  • Structure: quick fitting has an oval release ring for easy removal and installation of the tube.
Buy on Amazon Find on eBay

NACX 20mm Diamond Cutting Disc Saw Blade, with Titanium Plating, Glass Metal Ceramic Gemstone Cut Off Wheel, 10Pcs

NACX 20mm Diamond Cutting Disc Saw Blade, with Titanium Plating, Glass Metal Ceramic Gemstone Cut Off Wheel, 10Pcs Cover
  • It is made of high-quality emery, with titanium-plated surface, which is sharp and wear-resistant, has a long service life.
  • Diamond Cutting Discs Diameter: 20mm/0.78”; Mandrel Diameter: 3mm/0.11”
  • The cutting wheel is sharp and strong, suitable for cutting gems, glass, ceramics, porcelain, tiles, carbide, rocks, aluminum and copper.
Buy on Amazon Find on eBay
Nylon Lock Nuts Hex Lock Nuts

M3 x 0.5mm Nylon Insert Hex Lock Nuts, 304 Stainless Steel, Plain Finish, Pack of 200

M3 x 0.5mm Nylon Insert Hex Lock Nuts, 304 Stainless Steel, Plain Finish, Pack of 200 Cover
  • [Material]: 304 stainless steel, rustproof and durable
  • [Size]: thread: M3; width from flat to flat: 5.5mm / 0.22"; height: 4mm / 0.16"
  • [Features]: nylon inserted, these lock nuts greatly reduce the looseness under vibration and torque
Buy on Amazon Find on eBay
Steel Drill Bit Sets Drill Bit Sets

Countersink Drill Bit Set, 4Pcs Woodworking Chamfer High Speed Steel Countersink Drill Bits 3 4 5 6 mm with L-Shape Hex Wrench

Countersink Drill Bit Set, 4Pcs Woodworking Chamfer High Speed Steel Countersink Drill Bits 3 4 5 6 mm with L-Shape Hex Wrench Cover
  • [Quick Chip Removal] The five-edged chamfer design of the countersink helps to automatically and quickly remove chips from both sides from the hole.
  • [Three-point Design] The countersunk drill bit is set with tri-cuspid center to ensure that the drill bit does not shift and not easy to slide, has no deviation, which is beneficial for accurate and rapid drilling.
  • [Package Contents] A set of countersunk bits are equipped with 4 pieces of countersunk drill bits, #3, #4, #5, #6, including one L-shaped hex wrench.
Buy on Amazon Find on eBay
Taps & Dies

5Pcs Screw Remover, High Speed Steel 4241, Screw Extractor Hex Shank Bolt Extractor, for Removal of Broken Damaged Screw

5Pcs Screw Remover, High Speed Steel 4241, Screw Extractor Hex Shank Bolt Extractor, for Removal of Broken Damaged Screw Cover
  • Handle: hex shank 1/4'' (6.35MM)
  • Size: 0#,1#,2#,3#,4#
  • Package Included: 5 screw extractors and 1 plastic container box
Buy on Amazon Find on eBay

NACX FAQs