10Gtek feature image

10Gtek

Review rating Review rating Review rating Review rating Review rating 4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the 10Gtek range from £4.99 to £105.99, and the average price of all the products is about £29.27. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

10Gtek offers a variety of products, there are 306 products available, 18 of which were analyzed in detail and recommended to customers. The 10Gtek review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

10Gtek Best Sellers

Last Updated: 14 Jun 2023

[4 Pack] NRF24L01 2.4GHz Antenna Wireless Transceiver Module, Available for Arduino software to set the address

The device has 125 frequency points and 25 channels, meet the built-in CRC error detection and multipoint communication address control.
Built-in 2.4Ghz antenna, for the worldwide 2.4 ~ 2.5 GHz ISM band, data rate up to 2Mbps and it has GFSK modulation efficiency, anti-interference ability.
NRF24L01 module can be wildly used to wireless remote control, mouse, NFC, smart home, wireless audio etc.
More low-power 1.9 ~ 3.6V, only 1uA on power down mode, input pin can withstand 5V voltage input, greatly reduce the current consumption.
High-speed SPI interface is used, simple 8 pin, 2.54 mm pitch header pins for easy connection and used.

10Gb SFP+ RJ45 Copper Module - 10GBase-T SFP+ Transceiver Compatible for Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Netgear, Mikrotik S+RJ10, TP-Link, D-Link

[Cable Type] CAT.6a/CAT7 RJ45 cable; Reach: up to 30m
[Data Rate] 1.25G/10G, multi-rate. Please use the 10G SFP+ transceiver in 10G SFP+ ports, and connect it to 10G or 1G RJ45 port on the other side
[Wide Compatibility] Compatible with many brands such as: Cisco, Meraki, Ubiquiti, Mikrotik, Netgear, Zyxel, QNAP NAS, Synology, D-Link, TP-Link, Supermicro and Other Open Switches. Not compatible with HP-ProCurve, HP-H3C, HP-Aruba, Intel, Arista, Mellanox, Dell Force10, Extreme, Brocade, Juniper
[Professional Customer Service] 10Gtek offers more compatibility options and we have professional engineers to answer questions about compatibility. If your brands are not listed here or if you have any compatibility questions, please feel free to contact us, we'll reply you within 24-hours.
[Marvell 88X3310 PHY Controller] The 10GBase-T module is built with the latest IC: Marvell 88X3310. Please note the 10GBase-T SFP+ module can get hot when it's working, because the IC power consumption is 2.5W. We suggest to use this product in places where the ambient temperature is below 50°C.

10Gtek® 10Gb/s SFP+ DAC Cable 2m - 10GBASE-CU Passive Direct Attach Copper Twinax SFP+ Cable Compatible for Cisco SFP-H10GB-CU2M, Ubiquiti, Netgear, D-Link, TP-Link, Zyxel, Mikrotik, Open Switch

[Copper Twinax Cable] 2-pair differential twinax cable, Passive, EEPROM I2C, 2-meter (length includes SFP+ connectors), AWG30
[Data Rate] 10Gb/s. Please use the 10G SFP+ cable in 10G SFP+ ports
[Wide Compatibility] Both ends are compatible with many brands such as: Cisco, Meraki, Ubiquiti, Mikrotik, Netgear, Zyxel, QNAP NAS, Synology, D-Link, TP-Link, Supermicro and Other Open Switches. Not compatible with HP-ProCurve, HP-H3C, HP-Aruba, Intel, Arista, Mellanox, Dell Force10, Extreme, Brocade, Juniper
[Professional Customer Service] 10Gtek has professional engineers to answer questions about compatibility. If your brands are not listed here or if you have any compatibility questions, please feel free to contact us, we'll reply you within 24-hours.
[More Options] 10Gtek offers more compatibility options, more data rate options from 1Gb/s to 40Gb/s, and more colour options. Please Vist 10Gtek store for more options.

3.3v 5v Power supply adapter for MB102 Prototype breadboard DC 6.5-12V or USB power supply module, for Arduino breadboard

Suitable for MB102 breadboard, input voltage: 6.5-12V (DC) or USB power supply, output voltage: 3.3V, 5V can be switched.
Breadboard dedicated power module, compatible with 5V, 3.3V.
Up and down two independent control, can be switched to 0V, 3.3V, 5V.
Onboard two sets of 3.3V, 5V DC output pins.
Large output current:

[10 Pack] 1G SFP SX LC Multimode Module - 1000Base-SX Mini-Gbic Transceiver Compatible for Cisco GLC-SX-MMD/GLC-SX-MM, Meraki MA-SFP-1GB-SX, Mikrotik S-85DLC05D, Ubiquiti, Netgear, D-Link, Zyxel

[Wavelength] 850-nm
[Data Rate] 1.25Gb/s. Please use the 1G SFP transceiver in 1G SFP ports or 10G SFP+ ports which can also support 1G
[Wide Compatibility] Compatible with many brands such as: Cisco, Meraki, Ubiquiti, Mikrotik, Netgear, Zyxel, QNAP NAS, Synology, D-Link, TP-Link, Supermicro and Other Open Switches. Not compatible with HP-ProCurve, HP-H3C, HP-Aruba, Intel, Arista, Mellanox, Dell Force10, Extreme, Brocade, Juniper
[Professional Customer Service] 10Gtek offers more compatibility options and we have professional engineers to answer questions about compatibility. If your brands are not listed here or if you have any compatibility questions, please feel free to contact us, we'll reply you within 24-hours.
[Fiber Cable Type] Dual LC OM2/OM3/OM4 multi-mode fiber patch cable; Reach: up to 550m

10Gtek for Ubiquiti 1G SFP RJ45 Transceiver UF-RJ45-1G - 1000Base-T Copper Mini-Gbic Module

Data Rate: 1.25Gb/s
Compatible for Ubiquiti UF-RJ45-1G.
Reach: up to 100 meters transmission via CAT.5e
Interface: RJ-45; Cable Type:CAT.5e
10Gtek offers more compatibility options, if your brands are not listed here or if you have any compatibility questions, please feel free to contact us, we'll reply you within 24-hours.

10Gtek® 10GbE PCIE Network Card for Intel X520-DA1-82599EN Chip, Single SFP+ Ports, 10Gbit PCI Express x8 LAN Adapter, 10Gb NIC for Windows Server, Win8, 10, Linux

Low Profile & Full Height brackets. Express* 2.0. 5.0 G T/s x8 Lane. Compatible with x8, x16 standard and low-profile PCI Express* slots.
Built with original Intel 82599EN 10 Gigabit Ethernet Controller chip that enables to provide high performance and reliability.
This X520-DA1 adapter doesn't include transceivers or DAC ect. Single SFP+ port can support any 10 Gigabit SFP+ SR transceiver/ SFP+ LR transceiver/ SFP+ DAC/ SFP+ AOC.
Supported Operating Systems: Windows Server 2003/ 2008/ 2012, Windows7/8/10/Visa, Linux, VMware ESX.
Easy installation, a driver disk is included in the package or you can download the driver from Intel website.

a Pair of 1.25G Media Converters(kit #1), SFP slot, with a SFP module, MMF, 850-nm, 550-m, British Power Supply

Fiber Type: MMF, Dual LC
Fiber Port: 550-m SFP transceiver included (1.25G, multimode, 850-nm), 2-pack
RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover
Cable Type: UTP/STP Cat.5e for 100 meters
British Power Supply: 5V-1A

10Gtek OM3 LC to LC Duplex Fiber Patch Cable 0.5m(1.6ft), 50/125 Multimode UPC Polish LSZH, Application for 1G SFP, 10G SFP+, Media Converter, Length: 0.5m to 50m, 5-Year Warranty

OM3 Fiber patch cable should be used for multimode modules. OM3 fiber compatible with Gigabit Ethernet 1000Base-SX, or 10GBase-SR/LRM, and Fibre Channel 100/200/400/1200-MX; Backwards compatible with FDDI, and Fast Ethernet 10/100BASE SX or FX.
LC to LC Duplex, 10Gb OM3 Multimode, 50/125, Low Smoke Zero Halogen (LSZH), 0.5-Meter(1.6ft).
The patch cable is manufactured using top quality materials. With grade-A 10Gb 50/125 duplex fiber, a Low-Smoke Zero Halogen (LSZH) jacket and superior component.
Low insertion loss: ≤0.3(dB), high return loss: ≥30(dB). All cables are 100% optically tested for insertion loss to ensure high speed and low loss.
5-Year warranty. 10Gtek offers more length and connector options.If you can't find the product you need, please contact us.

10Gtek for Intel SFP+ Cable XDACBL1M 1-Meter(3ft), 10Gb/s SFP+ Direct Attach Copper Twinax Cable, Passive

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 1-meter, AWG30.
Both ends of the cable can be widely compatible with Intel, Ubiquiti, Netgear, D-link, TP-Link, Zyxel, QNAP NAS, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, Open switches. Cannot compatible with Cisco, HP, H3C, Arista, Mellanox, Dell Force 10, Extreme, Brocade, Juniper, IBM, Foundry, Allied Telesis.
10G SFP+ cable can connect switches, routers, servers, NICs, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing.
Data rate: 10Gb/s. Can be used in 10G SFP+ ports, cannot be used in gigabit SFP ports. If you need a gigabit SFP cable, please contact us.
3-year warranty and lifetime technology support. 10Gtek is a manufacturer of direct attach copper cable, customized sevice is also available.

Gigabit PCIE Desktop Network Adapter for Intel EXPI9301CT - 82574L Chip, Single RJ45 Port, 1Gbit PCI Express Ethernet LAN Card , 10/100/1000Mbps NIC for Windows Server, Win8, 10 and Linux

Low Profile & Full Height brackets. PCI Express* 1.1. 2.5 G T/s x1 Lane. Compatible with x1, x4, x8, x16 standard and low-profile PCI Express* slots.
Built with original Intel 82574L Gigabit Ethernet Controller chip that enables to provide high performance and reliability.
Supported Operating Systems: Windows 7/8/10, Windows Server* 2008/2012/2016, Linux, VMWare ESXi.
Single 10/100/1000Mbps RJ45 port which can support cat5 cable up to 100m.
Easy installation, a driver disk is included in the package or you can download the driver from Intel website.

[2 Pack] Active POE Splitter Adapter, 48V to 12V, IEEE 802.3af Compliant 10/100Mbps up to 100 Meters for Surveillance Camera, Wireless Access Point and VoIP Phone

Compatible with DC voltage 44-57V standard POE switches, overvoltage protection.
Convert non-POE cameras to Power over Ethernet.
Split POE signal in 12V DC power and 10/100Mbps ethernet data.
Port:DC Barrel Plug (5.5x2.1mm)
Plug Output: Data (1,2)/(3,6).
Output Power: 12V/1A, 15.4W, IEEE 802.3af compliant, power supply equipment (PSE) requirements compliant.

10Gtek [2 Pack] Gigabit Ethernet Media Converters, Dual SC Fiber Connector, multimode, 850-nm, 550-m, British Power Supply

Fiber Type: MMF, Dual SC
Fiber Port: 1.25G, SC, 850-nm
RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover
Power Supply: 5V-1A, UL Certified
Cable Type: UTP/STP Cat.5e for 100 meters

10Gtek OS2 SC to LC Duplex Fiber Patch Cable 1m(3.3ft), 9/125 Singlemode UPC Polish LSZH, Application for SFP, Media Converter, 5-Year Warranty

With LC to SC termination, this high-quality fiber optic patch cable is specificially designed for gigabit ethernet applications.
LC/UPC to SC/UPC Duplex, OS2 Single-mode, 9/125μm, LSZH, 1-Meter(3.3ft), jacket diameter: 3.0mm.
The patch cable is manufactured using top quality materials, with grade-a 9/125 duplex fiber, LSZH jacket and superior component.
Low insertion loss: ≤0.3(dB), high return loss: ≥50(dB). All cables are 100% optically tested for insertion loss to ensure high speed and low loss.
5-Year warranty. 10Gtek offers more length and connector options.If you can't find the product you need, please contact us. Save your money to buy[4 pack] of this, search ASIN: B078T72VHC.

12V-40V 10A PWM DC Motor Speed Controller module with Reverse Polarity protection, high current protection

Equipped with 10A fuse, with power supply reverse connection, control voltage overvoltage protection function, equipped with high-quality potentiometer, suitable for DC motor speed control.
Input voltage: DC 12V-40V, power: 0.01-400W, current: rated current 8A, large through current 10A, quiescent current 0.02A (standby state), frequency: 13khz, PWM pulse width speed regulation range: 10%-100%.
The power tube uses IRF3205, which is a big cow, and there is absolutely no need to worry about not being able to drive your motor. (Maximum value of parameter drain current Id: 82A; maximum voltage Vds: 75V; on-state resistance, Rds(on): 0.013ohm).
If you need the forward and reverse function, you can connect the positive and negative switch by yourself
50V1000uF large capacitor, compared with other types of speed regulators, the capacitance value of 100-220uF has obvious advantages.

10Gtek PCIe 3.0 to U.2 SFF-8639 Adapter, X4, for 2.5’’ U.2 NVMe SSD or 2.5" SATA SSD, with Full Height and Low Profile Brackets…

The expansion card is equipped with a full-profile bracket and doesn't require an adapter cable for installation, this helps to reduce clutter and simplifies system builds. The drive connects directly to the SFF-8639 connector on the adapter, and the adapter connects directly to the computer motherboard.
Mount a 2.5" U.2 NVMe SSD or 2.5" SATA SSD into your desktop computer or server to improve your system performance and expand overall internal storage. Please kindly notice to use a 2.5-inch SATA SSD, you need to use a SATA data cable to connect to the SATA interface on the motherboard.
It is compatible with PCI-E X16, X8, X4 Slots.
Full height and low profile bracket included. Size: 84.75mm*143.57mm.
Compatible with PCIe 3.0 motherboards and backward compatible with PCIe 2.0 and PCIe 1.0.

PCIE PCI Express 3.0 1X Black Extender Riser Cable, Use an FPC Cord, 180mm

The gold finger adopts the immersion gold process with a gold thickness of up to 3U, which enhances the plug-in service life and good electrical performance of the product.
The gold finger adopts the immersion gold process with a gold thickness of up to 3U, which enhances the plug-in service life and good electrical performance of the product.
PCIE x1 extension cord uses FPC cord material, lighter and thinner, softer.
Due to the fine structure of the wire core inside the product, in order to avoid damage or damage to the wire core, please hold the hard part of the PCB during the unplugging process.

10Gtek 6G Internal Mini SAS 36pin SFF-8087 Male (Host) to 4x SATA (Target) 7pin Female Fan-Out Cable, 0.5-m (1.6ft)

Impedance = 100 Ohms.
Internal SAS SFF-8087 to 4x SATA Forward Cable, 0.5-meter(1.6ft).
Up to 6Gbps data rates per channel.
This Mini SAS to SATA forward cable, 36pin SFF-8087 is host, connect to motherboard or RAID Controller with SFF-8087 port. 4x7Pin SATA is the target, connect to backplane or SATA hard disk with SATA port.
Flexible design of Mini SAS to SATA breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity; Woven mesh sheath covers half of the cable for easy routing; P1 to P4 markers provide easy ID after installation; Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnections.

10Gtek FAQs

You can purchase 10Gtek products from the seller 10 Gtek, over the last 12 months, the seller has received honest feedback from 51 consumers, and the average rating is 4.87. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and 10Gtek is worth your consideration.