EatPitaya feature image

EatPitaya

Review rating Review rating Review rating Review rating Review rating 4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the EatPitaya range from £2.99 to £22.88, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. EatPitaya provides their products for a reasonable price, which means the products cost around £11.89 on average. They are affordable options to make your shopping much easier.

EatPitaya offers 54 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. If you find yourself hesitating about a purchase, check out our thorough EatPitaya review to see what the best picks are.

EatPitaya Best Sellers

Last Updated: 15 Jun 2023

Eatpitaya B3 Lipo Battery Charger 2-3S Batteries Pack (7.4V,11.1V), RC Battery Balance Fast Charger (100-240V) for RC Quadcopter RC Drone Car Boat

[Fast Charge]: AC input voltage: 100V - 240V Max. Charging current: 3 x 800mA. Charging time is only 1-5 hours. The specific charging time depends on your battery capacity.
[Compatible with]: There are two battery ports built into the charger. The 3 pin port is suitable for 7.4V lithium battery. The 4 pin port is suitable for 11.1V lithium battery. Ideal for 7.4V 11.1V 2S - 3S Lithium Batteries. Charge two kinds of lithium batteries with different voltages at the same time, both of which are independent ports, and the charging does not affect each other. This charger is only suitable for lithium batteries.
[Product Features]: Built-in independent lithium battery balancer that ensures that each cell is fully charged and protected to maximize battery life and performance. Lipo battery balancer with over current protection, over temperature protection, short circuit protection and over voltage protection.
[Package Content]: 1 pcs B3 Lipo Charger; 1 pcs power cable. Case packaging keeps the charger safe in transit, allowing you to receive a brand new undamaged Lipo charger.
[LED Indicator]: When you connect the charger to the 7.4V lithium battery, Coll1 Coll2 starts to light up red, and the 7.4V lithium battery is being charged. When you connect the 11.1V lithium battery, Coll1 Coll2 Coll3 starts to light red, and the 11.1V lithium battery is charging. When the lithium battery is fully charged, the LED indicator will be in a steady green state.

EatPitaya For Dimplex Opti-Myst Electric Wall Fire Replacement RM-1220 ransducer ,One Transducer,Six Transducer Disc with One Removel Tool

Burbank: BBK20 (Series A - D),BBK20 (Series E); Danville: DNV20CH (Series A - Onward ), DNV20AB (Series A - C), DNV20BL (Series A - Onwards), DNV20BR (Series A - C);
Opty Mist Glass Disk Transducer Compatible with Dimplex RM-1220 Electric Wall Fire
Westbrook: WBK20 (Series A); Whitmore: WMR20 (Series A); Alameda: ALM20 (Series A); Auberry: AUB20 (Series A); Cassette: CAS600, CAS400NHLL, CAS400HLL, CAS600NH;
Remote Control: RTOPCS20, RTOPW20, RTOPI20BR, RTOPI20CH; Silverton: SVT20 (Series A)
Moorefield: MFD20 (Series A); Oakhurst: OKT20 (Series A); Redway: RDY20 (Series A - D), RDY20 (Series E); Sacramento: SCR20 (Series A); Tahoe: TAH20 (Series A), TAH20 (Series E)

Eatpitaya For DJI Mini 3 Pro RC Controller Neck Strap With CNC Free Dismantling Aluminum Alloy Screw Hanging buckle, for DJI Smart Controller/Mini 3 Pro Accessories

[No disassembly & easy storage;] After the screws are installed, there is no need to repeatedly disassemble and assemble the hook, and can be directly stored in the Sunnylife suit bag and remote control bag. At the same time, the quick release buckle design can be quickly stored in a few seconds, which is convenient and efficient.nyard]Microfiber lining, delicate and soft, comfortable texture, high-density woven belt, wear-resistant, can be carried for a long time, durable
[Special Design];This lanyard is specially designed for DJI remote control lanyard, free your hands, no need to worry about the remote control accidentally falling, making your flying experience more leisurely
[Package includes];ou will get 1x neck strap lanyard with buckles, 2 x screws, 2 x gaskets(Soft washers prevent screws from accidentally scratching the remote)
[High Quality Material];CNC machined metal hooks, durable, precise installation, more assured to use. High quality PU leather strap with low profile matte texture and delicate touch. Precision craftsmanship, reliable and durable
[Application];Suitable for DJI RC/DJI RC PRO/DJI Smart Controller, compatible with DJI Mini 3 Pro/Mavic 3/Air 2s/Mini 2/Air 2/Mavic 2 Zoom/Mavic 2 Pro/Mavic 2/Phantom 4 Pro V2.0 drone

EatPitaya NIMH Charger 2.4-12V + 8 in 1 RC Battery Charger(Multifunction) Compatible with SM 2P, JST, HuanQi, Futaba, Mini Tamiya, PWM 2P Male, Standard Tamiya for 2-10S Drone

[High stability] It can automatically determine the number of batteries and automatically adjust the output voltage. Precise constant current control allows current changes of less than 5% and keeps the battery in a healthy state of charge. Since this charger is small and lightweight, portable and easy to store, it is ideal for home and travel.
[Intelligent charging] Input AC100-240V, output 500-800mA. Adopt advanced and accurate -ΔV detection technology to judge whether the battery is full and stop charging in time. Improve battery life with trickle charging to ensure the battery doesn't overcharge just because it's fully charged. This charger features CE certification.
[Multiple protection functions] This charger has a built-in smart chip, which provides short-circuit protection, over-temperature protection, and over-current protection for the battery and the charger. Temperature protection (for battery packs with thermistors)
[Easy to use] Choose the connector you need to connect the battery pack to the charger, then plug the charger into an electrical outlet to charge the battery pack easily and safely. Two-color indicator light, red means charging, blue means charging is complete. Charge status at a glance.
[8 in 1 RC Battery Charger]Battery connectors: Standard Tamiya, Mini Tamiya, JST, SM 2P, Huanqi, Futaba,DIY Bare Wire,PWM 2P Male. The DIY bare wire is a 20AWG wire, which is convenient for you to DIY without restrictions.

Eatpitaya Cell Phone Cleaning Kit,Dust Plug for iPhone 11/11 Pro/11 Pro Max/12 /12 Pro/12 Pro Max/13/13 Pro/13 Pro Max, Phone Port Cleaning Brush Kit Phone Speaker & USB Port

Phone dust plug: The cover of the phone port dust plug is very thin, difficult to find, Won't get stuck in the phone, Easy to install and remove, Strong, don't worry about falling off when walking.
Package includes: The mobile phone port cleaning kit includes 4 pcs phone dust plugs, 5 pcs phone speaker cleaning brushes, 5 pcs port cleaning brushes, 2 pcs nylon brushes, 10 pcs Hole brush, and the whole set is complete, can meet your needs for mobile phone cleaning task.
Wide application: This cell phone cleaning kit can be used for Mobile phones, earphones, keyboards, laptops, watches, etc., to keep your electronic products clean and tidy.
Nice performance: This cleaning kit can not only keep the phone away from dust, the brush can also remove dust, keep the phone functioning normally, so that the device can work normally, and it can also extend the life of the device.
Considerate design: Mini tip brushes can clean small places hard to reach, Easily remove dirt, debris, etc. on the earphones, which can thoroughly clean mobile phones and other electronic products without leaving any fibers, no need to deal with static electricity and fluff.

EatPitaya Drone USB Charger Cable with SM-2P Connector Plug(3Pcs), Lithium Battery USB Charging Cable 3.7V 500mAh Output Portable with LED indicator for RC Car Child Toy Car Spare Battery

[Efficient charging] - The lipo battery charger is specially used for charging 3.7V lithium polymer battery, input: DC 5V, output current: 500mA
[Compatibility] Compatible with the following models: Syma X5, X5C, X5SC, X5SW, X4, H107, H107L, H107C, H107D, V977, V930, U816 etc. Suitable for 18650, 14500 batteries
[Light and convenient] - This entry-level battery charging cable is very lightweight and convenient for you to take anywhere.
[Easy to Use] Plug and play, no complicated operations, battery can be charged anytime. The USB interface allows you to have a variety of charging methods, which can be connected to mobile phone chargers, computers, mobile power supplies, etc. for charging.
[At a glance] This charging cable has an LED indicator, the red light is always on when charging, and the light is off when fully charged, so that you can know the charging status at any time.

EatPitaya For mini 3 pro Propeller Guard, Flight Safety Propeller Protection Crashworthy, Quick Release Removable Propellers Protector Steady Anti-Shake, For DJI Mini 3 Pro

[High Quality] Using high-quality materials, high strength, good toughness, will not affect the normal flight of your Mini 3 Pro, is the best choice to protect your drone.
[Compatibility] Durable propeller guard specially designed for DJI Mini 3 Pro drone.
[Safety protection] This propeller guard can effectively cushion the impact and isolate the propeller, which is very good to protect the Mini 3 Pro from accidental hits from trees, walls or other obstacles.
[Package Content] Two pairs for DJI Mini 3 Pro Propeller Guard Protector. Give your beloved drone an extra layer of protection.
[Easy Installation] This product adopts the buckle design, which is convenient and simple to install, will not scratch the fuselage, and is also very friendly to novice installation.

EatPitaya RC-N1 Cable for Dji Phantom, Mavic, MINI, Mavic Pro, Spark, Micro USB to Type-C Data Cable + Micro USB Connector + Micro USB to IOS Remote Controller Wire(3Pcs)

[Product feature] Firmly connected, not easy to loose connection, Perfect Short Right Angle Design for the Remote Controller and the Devices. 30cm / 11.8in in length. easy and convenient to carry. it is a exquisite spare part.
[High quality] USB cable is made of high-quality PVC material, which is strong, resistant to stretching, stable data transmission. And it is an excellent accessory.
[Wide Compatibility] This product is compatible for DJI MAVIC MINI Phantom 3 Phantom 4 Spark AIR drone, Used to connect remote controller to tablet or phone with IOS/Type C/Micro USB connector while the drone is flying.
[Three Types to Choose] Micro-USB to Type-C, Micro-USB to iOS interface, Micro-USB to Micro-USB Data Cable, You can choose according to your needs, no need to worry about which interface is missing.
[Easy to store] When not in use,it can be placed in the mobile device slot without affecting the storage of the mobile device holder, At the same time, it also avoids loss caused by placing it anywhere.

Eatpitaya Dust Plug Cell Phone Cleaning Kit for iPhone 11/11 Pro/11 Pro Max/12 /12 Pro/12 Pro Max/13/13 Pro/13 Pro Max, Phone Port Cleaning Brush Kit (10 Colors)

Package content: Mobile phone port cleaning kit includes 10 pcs Metal phone anti-dust plugs, 5 pcs phone speaker cleaning brush, 5 pcs port cleaning brush, 1 pc nylon brush, a total of 21 pieces, and the whole set is complete, can meet your needs for mobile phone cleaning task.
Compatibility: These metal anti dust plugs are compatible for iPhone 11/11 Pro/11 Pro Max/12 mini/12/12 Pro/12 Pro Max/13/13 Pro/13 Pro Max phones ports, with a mobile phone cleaning brush, it can prevent dust and clean the phone well, and maintain the cleaning effect of the phone.
Practical phone dust plug: The cap of plug is thin, hard to make some notice, won't destroy the phone's original design, the dust plug protects the phone port from dust, lint and splashes, while maintaining the stability of the port to prevent poor internal connections.
Functions: Not only the plug can keep away from dirt, but also the brush can take away the dirt, maintain the charging and headphone function normal so as to keep machine function as usual, also extend the life of your phones.
Easy to use: Simple and easy to use, the dust plug will not get stuck in the phone, strong and flexible, easy to install and remove, will not be loose, will not automatically fall when walking.

EatPitaya N8 NiMH Charger, Adjustable Current Smart Balance Charging for RC Boat RC Car Drone Airsoft 2-8S Nimh/NiCD Battery(2.4V 3.6V 4.8V 6V 7.2V 8.4V 9.6V)

[High quality] The internal chip of the smart nickel-metal hydride charger adopts advanced and accurate -ΔV detection technology to judge whether the battery is full and avoid overcharging. Through the trickle charge to ensure that the battery is fully full, improve the battery life.
[Specifications] AC input voltage:100-240V. Output power:20W. charging current: 1A/2A, this can be changed via the switch on the side of the charger. The charging current should be determined by the capacity of the battery you wish to charge.
[Note] This charger is suitable for NiMH / NiCD batteries with standard or mini Tamiya connector. Alligator clips can for DIY. The positive pin (red wire) of the Mini Tamiya connector is round and the negative pin (black wire) is square. Please do not charge when left unattended. It uses fireproof enclosure, which is safe and reliable.
[Easy to use] The charger comes with standard tamiya connector and charging cables,Once plugged in, simply connect the charger directly to the battery to start charging immediately. easy to carry and suitable for travel.
[Application] When your drone, air gun, remote control car, remote control boat, etc. are low in power, this 2-8S smart NiMH charger will be your best choice.

EatPitaya Servo Motor 20KG Digital RC Servo for RC Car Crawler Robot Control, Control Angle 180 Degrees High Torque Full Metal Gear Waterproof

[Features]: Large Torque - maximum torque is up to 20kg/cm@6V; High Rotation - 180 degree rotation. Good control, very suitable for robot joint activities.
[High Performance]: Built-in high-precision potentiometer and high-resolution digital chip, fast response, strong anti-interference ability, low noise. Adopt double ball bearing design to ensure high linearity of servo.
[Strong Heat Dissipation]: High quality copper teeth, CNC aluminum alloy housing allows the servo motor to cool down when it is working, ensuring that the servo motor works normally. Temperature protection.
[Package Content]: 1 pcs 20KG servo motor with power cable; 2 pcs 25T Adjustable metal servo arm; 4 pcs hard plastic servo arm(four styles). A variety of different styles of servo arms can meet your different needs.
[Compatible With]: Best for your DIY project. Ideal for use with most tracked vehicles, off-road vehicles, trucks, robotic arms or RC devices.

EatPitaya Quartz Ruby Heater Bulb, Patio Heater Lamp Heat Blub for Heatmaster U3 Heater, Halogen R7 Heating Bulb, 500 Watt, 240V, 118mm, 4 PCS

[PRODUCT SIZE]: The length is 118mm, and the shell is soft and can be bent. If the size of your heater installation bulb is shorter than the size of this product, you can also use this product.
[USED TO REPLACE THE HEATER HALOGEVN BLUBS]: If the bulb of your outdoor heater is broken, or you want to replace the high-heat bulb, this product can meet your needs for replacing the halogen bulb of the outdoor heater.
[YOU WILL GET]: 4 pcs quartz ruby heater bulbs.
[HIGH POWER]: Power: 500 Watt; Voltage: 220V - 240V; Instantaneous Light Is Fully Dimmable. Fully meet the heating needs of cold weather.
[APPLICATION]: This product is very suitable for Heatmaster U3 terrace heaters and some heaters.

EatPitaya Vinyl Storage Rack 25 Vinyl Rolls, Easy to Assemble Craft Room Vinyl Roll Holder for up to 25 Vinyl Rolls (12.2 x 12.2 " ,Aperture 2")

Sturdy And Durable: Our vinyl rolls holder is extremely durable and made of thickened acrylic material, that withstands everyday wear & tear. With convenient storage area, it makes your craft room more clean and tidy.
Vinyl Storange Rack: This vinyl rolls storage has excellent storage and organization features and can hold up to 25 vinyl rolls. lightweight and Easy to install. That means no more digging through drawers to find your desired color of vinyl rolls.
Versatile usage: The acrylic vinyl roll storage rack is specifically designed to organize and display any roll items within 5cm in diameter, Suitable for vinyl rolls, wrapping paper rolls, drawing paper rolls or diamond canvas rolls, etc. With a simple and modern style, it can be widely used in homes, offices, craft rooms, schools, shops, etc.
Size Details: Vinyl Storage Rack Size 12 x 12 Inch / 32 x 32 cm with 25 holes, each hole size is 1.97 Inch / 5 cm. Please check the size carefully before purchasing the product.
Detachable Design: Our vinyl holder is removable and consists of four assembly rods connected together, so you can disassemble it whenever you don't need it and won't waste storage space in your home.

EatPitaya 25kg Digital Standard Servo 1/8 1/10 1/12 Control Angle 180 Degrees High Torque Waterproof Full Metal Gear, for RC Car Crawler Robot Control

[Features]: Large Torque - maximum torque is up to 25kg/[email protected]; High Rotation - 180 degree rotation. Good control, very suitable for robot joint activities.
[High Performance]: Built-in high-precision potentiometer and high-resolution digital chip, fast response, strong anti-interference ability, low noise. Adopt double ball bearing design to ensure high linearity of servo.
[Strong Heat Dissipation]: High quality copper gears, CNC aluminum alloy housing allows the servo motor to cool down when it is working, ensuring that the servo motor works normally. Temperature protection.
[Package Content]: 1 pcs 25KG servo motor with power cable; 2 pcs 25T Adjustable metal servo arm; 4 pcs hard plastic servo arm(four styles). A variety of different styles of servo arms can meet your different needs.
[Compatible With]: Best for your DIY project. Ideal for use with most tracked vehicles, off-road vehicles, trucks, robotic arms or RC devices.

EatPitaya For Mini 3 Pro Landing Gear, Heightened Extender Foldable Landing Gear Legs, Quick Disassembly Convenient Storage Drone Protection Accessories(Gray)

[Heightening effect];The landing gear effectively increases the distance between the for Mini 3 Pro and the ground by 30mm to prevent the drone from directly touching the ground and avoid the for Mini 3 Pro from damaging the gimbal when taking off or landing.It can protect the drone from landing in different environments.(such as sand,grass,rocks ground,wet ground).
[Styling Design];Domineering spider shape, cutting-edge design style, make your drone look very cool. product installation is stable, does not affect the bottom vision system and sensing system of the for Mini 3 Pro drone.
[Light and convenient];Size:100x90x30mm/3.94x3.54x1.18in. Weighs only around 19.5g. Compact and easy to carry. won't add much load to the drone or affect flight performance. Foldable design help to carry or storage easily.
[Easy install];Non-destructive installation, in one step. With perfit design, it won't block light,vision system and camera lens.Soft silicone, does not scratch the drone body.
[Application];This landing gear legs are specially designed for DJI Mini 3 Pro drone. Landing Gear Made of high-quality material, fine workmanship, sturdy and durable, to ensure stable flight and long service life.

Eatpitaya For DJI Mini 3 Pro 8pcs Phnom Penh Propeller + RED Aluminum Motor Cover Cap Drone Accessory

[Convenient to use]lightweight design adds minimal burden to your drone, no need to remove the cover after installation, and will not affect the folding of the drone
[Motor cover design]Specially designed for Mavic Mini motor-Effectively prevent dust, splashed water, getting wet raining days and scratched during transportation., CNC finishing, can fit closely with the motor, and play a good shielding role on the top
[Propellers Blades]The propeller is compact, lightweight and easy to carry, with lower noise and easy flight, Diameter x thread pitch: 6.0x3.0in, material: plastic, suitable for Mini 3 Pro
[Package Included]You will get 4 pcs Motor Covers(Red)-dustproof, waterproof and scratchproof, 8 Pcs Propellers Blades(Double-sided orange tip)
[Motor Cover Application]These Motor Covers Compatible with DJI Mini 3 Pro/Mini 2/DJI Mini SE/ DJI Mavic Mini Motors. (NOTE: You will find that these motor covers are a little loose when install. Actually it designed for motor heat dissipation, it won't affect flight)

EatPitaya Silicone Case for AirTag, Protective Case Compatible with AirTag, Pet Loop Holder for Apple Air Tags, Anti-Lost Portable Protective Cover Fit for Keys, Backpacks (Pink purple)

[Material] Made of eco-friendly liquid silicone, sweat-proof, scratch-resistant, washable, soft-touch finish of the silicone exterior feels great in your hand.
[Never Fall out] This Airtag keyring employed One-Piece designed and precise cutting technology fits Airtag perfectly, It won't fall off even if it's crazy shaking, Specially designed for AirTag 2021.
[Wide compatibility] Easy to be bound to other things like keys, car keys, pet, cat, dog, or other device to help carry with your Airtag, track and find it.
[Easy to clean] When it's dirty just wash it with soap and water to make it look good as new! You can choose from many patterns, Or change it even every day to always adapt it to your daily style.
[Does not interfere with the signal] The hollow with use the edge to wrap design not only doesn't block your airtag's any signal, No matter where your AirTag is, you can find it quickly.

EatPitaya 8pcs G4 Halogen Bulbs, 20W 12V 2800K Warm White 2 Pin Clear Capsule Lamp Bulbs, 350lm G4 Halogen Light Bulbs Dimmable (8 Count(Pack of 1))

Standard Size: Bulb Diameter: 0.32” (8mm), Bulb Length: 1.25” (32mm), Base: G4 Bi-Pin 0.16"(4mm), Only used for stable AC/DC 12 volts.
G4 Halogen Bulbs: 8 Pack, 12V 20 Wattage, 350 Lumens, Soft light, G4 Clear glass Capsule.(Tips: G4 Halogen Light Bulbs Are Not Suitable For 120V Products, Such As Oil Burner, Lava Lamp And So On, If Used In 120V Products, It Will Cause The Bulbs Explode).
Wide Application: These G4 Halogen Bulbs are used for Accent Lights, chandeliers counters, Wall Mounts Sconces, table lamp, and for RV, Caravan, Boats, Yachts, etc.
Excellent & Safe Lighting Quality: High Quality Eco-Halogen, Omni-Directional 360° Beam Angle. CRI>99, Homogeneous Light, Eye-protective, 2800K warm white, No Mercury, Fully dimmable, Instant On.
3000 Hours Lifetime: G4 halogen bulbs are precision manufactured from high-quality components and can illuminate for up to 3000 hours. Inserting bulbs into fixtures is easy, but don't touch them directly with your hands. Please be careful with it!

EatPitaya Ultra Durable 80040 Washer Agitator Dogs Ears Compatible for Whirlpool 80040 / ER80040 / WP80040 / 80040VP & for Kenmore Washers Machine, Replaces

Compatible Brand: It is made exactly fit for most top name brands(for Whirlpool, for Kenmore, for KitchenAid, for Roper, for Estate, for Inglis, for Crosley Maytag)and replaces part numbers: 285612, 285770, 387091, 3366877, 80040VP, 99989668, etc.
Premium Quality: These 80040 washing machine agitator dogs are made of premium quality material and well-tested by the manufacturer, non OEM but quality equal to OEM requirements, Ensure long-lasting and effective performance.
Product Specifications: This 80040 Washer Agitator Dogs Set is for Washing Machine. These need to be replaced when the bottom part of the agitator moves but the top does not. Fixes the following symptomsWill not agitateNoisyPumps but will not spinSpins slowly.
Pcakge Includes: 8 * 80040 Washer Agitator Dogs, the washing efficiency is improved, and the entanglement or kinking between the laundry are effectively reduced.
Fit Models: For Kenmore 106.82872600 110.828918100 110.828918110 110.828918120 110.828918130 110.8293130 110.92093320 110.92093720 110.92293510 110.92570200 110.9281100 110.9975820 110088732791 11010202000 11010202001 11010502990 11010502991 11010852990 11010852991 11010852991 11015942400 11015864400 11015942401 11015944400 11015944401 11015952400 11015952401 11015954400 11026922500 11026914691 11026922502 11026922503 11026924500 11026924501 11026924502 11026924503 11026932690 11026932691.

EatPitaya FAQs

You can purchase EatPitaya products from the seller EatPitaya, over the last 12 months, the seller has received honest feedback from 38 consumers, and the average rating is 4.89. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and EatPitaya is worth your consideration.