MaxCam feature image

MaxCam

Review rating Review rating Review rating Review rating Review rating 4.8

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the MaxCam range from £5.99 to £54.99, and the average price of all the products is about £23.29. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

MaxCam has a relatively small number of products for sale, only 41. We analyzed some of them in detail and recommended them to our readers. The MaxCam review aims to sharpen your understanding of the brand and introduces you to their bestselling products. Just keep reading!

MaxCam Best Sellers

Last Updated: 15 Jun 2023

MAXCAM Power Triple Battery Charger for GoPro HERO11/HERO10/HERO9 Enduro Battery Black

Small, light and easy to carry, the flat and round design like cobblestones makes it comfortable to hold hands. The truly portable storage charger can be easily put into your pocket without being ugly. Exterior Dimensions:11.5*5.6*2.3cm, weight: 54g.
Portable storage box battery charger for GoPro HERO11/HERO10/HERO9 Black. It can charge 3 batteries at the same time, and supports charging of Official GoPro HERO11/HERO10/HERO9 Enduro batteries.
Three intelligent IC protection circuits with multiple protections such as overcharge, overdischarge, overcurrent, overheat, short circuit and so on.
Equipped with a TYPE-C interface 1M long 3A charging cable, which can be used as a data cable to transfer data for GoPro cameras.
3A fast charging can charge 3 batteries in about 2 hours, input parameter: 5V / 3A; output parameter: 4.4V / (0.8A * 3)

MAXCAM Carrying Small Case Compatible with DJI Pocket 2 Creator Combo (Pocket 2 and Accessories are NOT Included)

Made of High-density Material for More Durable,great protect your dji pocket 2 safe.
Specially designed for DJI Pocket 2 Creator Combo. Note:CASE ONLY, Pocket 2 and Accessories are NOT Included.
Mesh pocket with a zipper enlarges the storage space for cables or small other accessories and keep them in good condition.
Ideal for travel or home storage, built in carry handle and carabiner loop to keep your dji pocket 2 and accessories secure.
Exterior Dimensions:18*13*6.5cm/7*5.1*2.6inch.We offer 100% money back or replacement guarantee if there are any quality problem.

MAXCAM Power Triple Battery Charger for GoPro HERO8 Black / HERO7 Black / HERO6 Black / HERO5 Black

Small, light and easy to carry, the flat and round design like cobblestones makes it comfortable to hold hands. The truly portable storage charger can be easily put into your pocket without being ugly. Exterior Dimensions:11.2*5.3*2.3cm, weight: 47g.
Portable storage box battery charger for GoPro HERO8 Black / HERO7 Black / HERO6 Black / HERO5 Black. It can charge 3 GoPro batteries at the same time, and supports charging of Official GoPro batteries or other brands of batteries. Note: GoPro Hero 9 is not supported
Three intelligent IC protection circuits with multiple protections such as overcharge, overdischarge, overcurrent, overheat, short circuit and so on.
Equipped with a TYPE-C interface 1M long 3A charging cable, which can be used as a data cable to transfer data for GoPro cameras.It is recommended to use the original USB TO TYPE-C charging cable. Non-original TYPE-C charging cables are not guaranteed to work.
3A fast charging can charge 3 batteries in about 2 hours, input parameter: 5V / 3A; output parameter: 4.4V / (0.8A * 3)

MAXCAM 2-Pack Replacement Batteries and Triple Charger for GoPro HERO11/HERO10/HERO9 Black

Portable storage box battery charger for GoPro HERO11/HERO10/HERO9 Black. It can charge 3 GoPro batteries at the same time, and supports charging of Official for GoPro HERO11/HERO10/HERO9 Black batteries.
Includes two spare 1720mAh lithium-ion rechargeable batteries, Compatible with GoPro HERO11/HERO10/HERO9 Black.
Three intelligent IC protection circuits with multiple protections such as overcharge, overdischarge, overcurrent, overheat, short circuit and so on.
Small, light and easy to carry, the flat and round design like cobblestones makes it comfortable to hold hands. The truly portable storage charger can be easily put into your pocket without being ugly. Exterior Dimensions:11.5*5.6*2.3cm, weight: 54g.
3A fast charging can charge 3 batteries in about 2 hours, input parameter: 5V / 3A; output parameter: 4.4V / (0.8A * 3).

MAXCAM Extension Pole Tripod, Mini Selfie Stick Tripod Stand Handle Grip for Webcam iPhone Samsung Smartphone Gopro DJI Pocket Canon Sony Cameras Vlogging

To shoot from different angles, it is very suitable for single -player VLOG shooting. In the case of natural relaxation of the arm, the upper body is completely entered into the mirror, and the head will not exceed the picture. The films shot are also directly looking at the perspective. You can also adjust the angle and range of the mirror by adjusting the length of the arm.
You can easily target shooting objects, lightweight, portable, easy to carry, and help you shoot more stable images. You can easily put it in your pocket, comfortable and non -slip structure, and you can grasp it firmly. Note: The maximum load bearing supports 800g of weight and cannot be used underwater.
The palm of the hand alone is enough to mini, you can easily put it in your pocket, and you do not occupy the place when storing.
The flexible telescopic length, the telescopic rod can pull out 3 knots, and can be fixed at any length (about 18.5 to 31 cm).
It can be used as a desktop bracket. The 360 -degree rotating spherical gimbal can help you find more unexpected perspectives.

MAXCAM Carrying Case Compatible with DJI Mini SE

[Strap, Carry handle, Double zipper] Come with an comfortable adjustable shoulder strap and a side carry handle, and a double zipper for quick placement and retrieval.
[Highly customized] With Customized-cut Form for DJI Mini SE Base Package, it can hold 1 x DJI Mini SE drone, 1 x Remote Controller and others base accessories. Note: CASE ONLY, Drone and accessories NOT INCLUDED.
[Velvet Materials] The lining support is made of velvet material, which fits the fuselage to protect the drone from collision damage.
[Size, Weight] Exterior Dimensions(length*width*height): 22*22*8 CM (8.66*8.66*3.15 Inch), weight: 324g. We offer 100% money back or replacement guarantee if there is any quality problem.
[Hard shell] Made Of High-density EVA Material, the outer case is tough and durable, Great Protect your Drone and all Accessories.

MAXCAM Screen Protector for DJI Action 2, Ultra Clear Tempered Glass Screen Protector + Tempered Glass Lens Protector + Tempered Glass Front Screen Protector - 2 Packs

9H Hardness of The surface. Protect back screen and lens from daily scratches, dust, scrapes, and normal signs of wear.
Specifically designed for DJI Action 2 Camera.
Specialized desgin with 3D-Touch, maintains the original touch experience with this screen protector.
Package Includes: 2 x Tempered Glass Screen Protection Film; 2 x Tempered Glass Lens Protection Film; 2 x Tempered Glass Front Screen Protection Film; 2 x Screen Cleaning Paper; 2 x Cleaning Cloth.
High definition with 99.99% transparecy which allows an iptimal viewing experice.

MAXCAM Swivel Backpack Clip Mount Compatible with DJI Pocket 2/1

Innovative vitaly design, easy to remove your camera by rotating the screw cap.
The 361-swivel feature helps you keep things level, strong clamping force, easy to install on your backpack belt.
Works as a kickstand for selfies, group pics or time lapse shots.
Easily clip your pocket camera to backpack strap, furniture and more to capture unique perspectives.
Compatible with all DJI Pocket2/1 cameras.

MAXCAM Selfie Stick Tripod Extension Rod for DJI Pocket 2/1, Aluminum Alloy Extension Rod + Tripod + Phone Holder + Accessory Mount

In both usages, osmo pocket can be installed separately, or osmo pocket + mobile phone can be installed together.
It is very stable, and does not shake when shooting. The tripod is extended. The tripod and extension rod are made of aluminum alloy.Note: CASE Tripod Extension Rod, Osmo Pocket and Mobile phone NOT INCLUDED.
The length of the tripod is: 17 cm, the weight is 156g, the weight of the extension rod is 156g, the total is 312g.
The extension pole is compatible with original accessories. The top of the extension pole provides a 1/4 interface and a universal interface for action cameras.
Retractable length, extendable length range of extension rod: 25 ~ 80 cm, you can lock the length arbitrarily within this range.

MAXCAM Aluminum Alloy Battery Cover Door for GoPro HERO11/HERO10/HERO9 Black

While opening a hole at the interface to facilitate plugging and unplugging of the data cable, a closable warehouse door is added.
The USB charging pass-through door with lid is specially designed for GoPro HERO11/HERO10/HERO9 Black, ensuring that the camera can be charged during long-term shooting.
When using the data interface, there is no need to open the entire side cover, just open the closable door, and the inside of the body and the battery are not exposed.
In daily storage and use, it can effectively prevent the intrusion of foreign objects from causing damage to the data interface.
Although this side cover can be closed, there is a slight gap in the closed part and cannot be waterproof. Do not use it for wading.

MAXCAM Fill Light Battery Power Grip for GoPro HERO11/10/9/8/7/6/5 Black, DJI Pocket 2/1

Battery capacity: 4800 mAh, provides about three hours of 4K/30 recording time, Different shooting modes have different durations.
Fill light Battery power Grip Charge & Fill light 2 in 1.
Integrated LED fill light, The fill light has three levels of brightness adjustment and a flashing mode.
Be careful when using outdoors. This item is not waterproof. Do not use in water or rain.
1/4" Threaded Hole, Can be attached to your 1/4" threaded bracket. Size: 172*31*31(mm); weight:170(g).

MAXCAM Carrying Case Compatible for Meta Quest 2

Made Of High-density EVA Material,the outer case is tough and durable,Great Protect your VR and all Accessories.
With Custom-cut Foam Compatible for Meta Quest 2 , it can hold 1 x VR Glasses, 2 x Touch controllers, 1 x Silicone cover, 1 x Glasses spacer, 1 x Charging cable,1 x Power adapter and others accessories.
Suitable for VR and all accessories daily storage, travel, outdoor photography, party, hanging out with drone club friends.
Protective belt, We added 2 flexible velcro protective belts in the bag. It can protect VR and Touch controllers. The Shaking of the case can also ensure that the accessories will not move. Exterior Dimensions(length*width*height): 35*30*13 CM (13.8*11.8*5.1 Inch), weight:1.3kg(2.86lb).
Come with an comfortable ajustable shoulder strap and a side carry handle,it is very convenient to carry them with you wherever you go,most important is keeping your VR and others accessories safe.

MAXCAM Lagre Case for DJI OM 5 + Magnetic Phone Clamp 2 + Grip Tripod + Fill Light Phone Clamp

Made of High-density Material for More Durable, great protect your Smartphone Gimbal Stabilizer safe.
Specially desiged for DJI OM 5 and it can holds 1 x OM 5, 1 x Magnetic Phone Clamp 2, 1 x Fill Light Phone Clamp, 1 x Grip Tripod and more others acccessories. Note: CASE ONLY, DJI OM 5 and Accessories NOT Included.
Mesh pocket with a zipper enlarges the storage space for cables or small other accessories and keep them in good condition.
Ideal for travel or home storage, built in carry handle and carabiner loop to keep your Smartphone Gimbal Stabilizer and accessories secure.
Exterior Dimensions:33*22*6.5cm/13*8.6*2.6inch.

MAXCAM Carrying Case Compatible with DJI FPV Combo

[Multiple protection] New protective belt design to prevent DJI FPV Combo and accessories from being damaged by shaking collision.
[Highly customized] With Customized-cut Form for DJI FPV Combo, it can hold 1 x DJI FPV, 1 x Remote Controller, 1 x Goggles V2, 2 x Battery, 1 x Motion Controller, 1 x AC Power Adapter and others base accessories. Note: CASE ONLY, DJI FPV Combo and accessories NOT INCLUDED.
[Strap, Carry handle, Double zipper] Come with an comfortable adjustable shoulder strap and a side carry handle, and a double zipper for quick placement and retrieval.
[Size, Weight] Exterior Dimensions(length*width*height): 43.5*32*14.5 CM (17.1*12.6*5.7 Inch), weight: 2.1kg.
[Hard shell] Made Of High-density EVA Material, the outer case is tough and durable, Great Protect your Drone and all Accessories.

MAXCAM Orange Waterproof Hard Case Compatible for DJI Mini SE

Made Of High-density EVA Material,the outer case is tough and durable,Great Protect your DJI Mini SE.
Hard-shelled protective case for storing and transporting, With Customized-cut Form for DJI Mini SE.
IP67 rating allow users to carry DJI Mini SE to outdoor environments with water.
High-quality hard case made of PP plastic provides strong protection against physical collision.
Dimension: 10.6x8.6x11 inch / 27x22x11 cm, Weight: 2.4 lbs / 1.1 kg. Note: CASE ONLY, DJI Mini SE and accessories NOT INCLUDED.

MAXCAM Shoulder Bag Travel Case for DJI Pocket 2 Creator Combo (Pocket 2 and Accessories are NOT Included)

[Strap, Carry handle, Double zipper] Come with an comfortable adjustable shoulder strap and a side carry handle, and a double zipper for quick placement and retrieval.
[Highly customized] With Customized-cut Form for DJI Pocket 2 Creator Combo, it can holds 1 x Pocket 2 Do-It-All Handle can be installed, 1 x Tripod Mount, 1 x Microphone Transmitter/windscreen and more others accessories. Note:CASE ONLY, Pocket 2 and Accessories are NOT Included.
[Velvet Materials] The lining support is made of velvet material, which fits the fuselage to protect the Pocket 2 from collision damage.
[Hard shell] Made Of High-density EVA Material, the outer case is tough and durable, Great Protect your Pocket 2 and all Accessories.
Dimensions(length*width*height): 22*22*8 CM (8.66*8.66*3.15 Inch), weight: 324g. We offer 100% money back or replacement guarantee if there is any quality problem.

MAXCAM Carrying Case Compatible with DJI OM 4 / DJI Osmo Mobile 3 + Grip Tripod (Osmo Mobile 3 and Accessories NOT Included)

Made of High-density Material for More Durable,great protect your osmo pocket safe.
Specially desiged for DJI OM 4 / DJI Osmo Mobile 3 and it can holds 1 x DJI OM 4 / Osmo Mobile 3,1 x Grip Tripod and more others acccessories.Note: CASE ONLY, Osmo Mobile 3 and Accessories NOT Included.
Mesh pocket with a zipper enlarges the storage space for cables or small other accessories and keep them in good condition.
Ideal for travel or home storage, built in carry handle and carabiner loop to keep your osmo pocket and accessories secure.
Exterior Dimensions:22*18*6.5cm/8.7*7*2.6inch.We offer 100% money back or replacement guarantee if there are any quality problem.

MAXCAM Carrying Case Compatible with DJI Action 2

Made of High-density Material for More Durable, great protect your Action 2 safe.
Specially designed for Action 2 Dual-Screen Combo. Note: CASE ONLY, Action 2 and Accessories are NOT Included.
Mesh pocket with a zipper enlarges the storage space for cables or small other accessories and keep them in good condition.
Ideal for travel or home storage, built in carry handle and carabiner loop to keep your Action 2 and accessories secure.
Exterior Dimensions:22*18*6.5cm/8.7*7*2.6inch.

MAXCAM aluminum alloy phone holder for DJI Pocket 2

Comes with cold shoe and 1/4" threaded interface for easy expansion.
Connect the phone and Pocket 2/1 firmly, and don't worry about the loosening of the interface during shooting, which may cause the phone or Pocket to fall off.
Small, light, portable, aluminum alloy material, foldable storage.
Product weight: 87.8g.
Product size: 58*74*22 mm (stored state), 104.5*74*35 mm (extended state).

MAXCAM Shoulder Bag Travel Case for DJI Action 2

[Strap, Carry handle, Double zipper] Come with an comfortable adjustable shoulder strap and a side carry handle, and a double zipper for quick placement and retrieval.
[Highly customized] With Customized-cut Form for DJI Action 2, it can holds 1 x Action 2 Need to wear Magnetic Protective Case, 1 x Magnetic Phone Clamp 2, 1 x Remote Control Extension Rod and more others accessories. Note: CASE ONLY, DJI Action 2 and Accessories NOT Included.
[Velvet Materials] The lining support is made of velvet material, which fits the fuselage to protect the DJI Action 2 from collision damage.
[Hard shell] Made Of High-density EVA Material, the outer case is tough and durable, Great Protect your DJI Action 2 and all Accessories.
Dimensions(length*width*height): 22*22*8 CM (8.66*8.66*3.15 Inch), weight: 324g. We offer 100% money back or replacement guarantee if there is any quality problem.

MaxCam FAQs

You can purchase MaxCam products from the seller maxcam, over the last 12 months, the seller has received honest feedback from 61 consumers, and the average rating is 4.81. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and MaxCam is worth your consideration.