FLEOR feature image

FLEOR

Review rating Review rating Review rating Review rating Review rating 4.7

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the FLEOR range from £8.54 to £26.18, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. FLEOR provides their products for a reasonable price, which means the products cost around £14.85 on average. They are affordable options to make your shopping much easier.

FLEOR offers a variety of products, there are 306 products available, 18 of which were analyzed in detail and recommended to customers. If you find yourself hesitating about a purchase, check out our thorough FLEOR review to see what the best picks are.

FLEOR Best Sellers

Last Updated: 15 Jun 2023

FLEOR Alnico 5 Strat Pickup Single Coil Pickups Guitar Neck/Middle/Bridge Pickup White for Strat Squier Electric Guitar

Magnet: Alnico 5; Pole pieces: flat fixed. White cover, ABS plastic.
Single coil pickups fit Fender stratocaster squier electric guitar pickup replacement.
Resistance: Neck is 6-7K; Middle is 6-7K; Bridge is 7-8K.
Pickup Pole Spacing: Neck-50mm, Middle-50mm, Bridge-52mm.
Package come with 3pcs strat pickups set(neck/middle/bridge),6 Screws and 6 Springs.

FLEOR Long Brass Shaft Control Pots A250K Audio Taper Potentiometers 24 Spline Split Shaft D3/8" for Electric Guitar Control Volume Tone, Pack of 2

Full brass shaft, features low noise, robust construction, smooth feel, reduced shaft wobble,longer-life use.
Ideal for electric guitar/bass building, for pickguard/control plate mounting. Specially designed for smooth and accurate response and a good choice for the discerning guitarist looking for optimum performance.
The 250K ohm potentiometer, gives the guitar a little warmer sound. 250K pots are usually used for single-coil pickups. Note: there is no fixed formula for the tone, depending on guitar sound you like.
Package List: 2 pcs A250K pots, coming with hex mounting nuts, flat washer and lock washer for custom height adjustment on a pickguard or control plate.
Audio taper (A type), 24 split knurled shaft, diameter approx. 1/4inch (6mm); Thread shaft diameter approx. 3/8inch (9.5mm). Shaft Length: 19.5mm. Deatil size, kindly refer to the dimension drawing. Thanks.

FLEOR 3PCS 52mm Single Coil Pickup Covers Set with 2T1V Control Knobs & 5-Way Selector Switch Tip for Stratocaster Guitar, White

Pickup Covers: plastic, 52/52/52mm pole piece holes for single coil pickups.
Set of pickup covers, knobs and tip for Fender Stratocaster gutiar or similar replacement. Kindly check the dimension drawing before purchasing.
Tip: cross '+' slot style, 3.7mm diameter; 5-way selector swith tip.
Packae List: 3 piece strat covers; 2 piece tone knobs; 1 piece volume knobs; 2 piece switch tips.
Control Knobs: plastic, 2 piece Tones and 1 piece Volume knobs, white with gold letter.

FLEOR Vintage Single Coil Pickups Set Chrome Neck & Bridge Pickup (50mm/55mm) Alnico 5 Magnet for Telecaster Style Guitar Parts

Position: neck pickup + bridge pickup; Wax potted to eliminate unwanted feedback and noise.
Single coil pickup set for Telecaster style electric guitar.
Package List: 1pcs neck pickup; 1pcs bridge pickup; 5pcs screws; 5pcs springs.
Magnet: Alnico 5 (Alnico V) magnet. Resistance: neck 6-7K, bridge 6-7K. Pole Spacing: neck 50mm, bridge 55mm.
Bobbin: black ABS plastic bobbin. Cable: 2 Conductors. Neck Pickup Cover: chrome color.

FLEOR Short Brass Shaft Control Pots A500K Audio Taper Potentiometers 24 Spline Split Shaft D3/8" for Electric Guitar Control Volume Tone, Pack of 2

Full brass shaft, features low noise, robust construction, smooth feel, reduced shaft wobble,longer-life use.
Ideal for electric guitar/bass building, for pickguard/control plate mounting. Specially designed for smooth and accurate response and a good choice for the discerning guitarist looking for optimum performance.
The 250K ohm potentiometer, gives the guitar a little warmer sound. 250K pots are usually used for single-coil pickups. Note: there is no fixed formula for the tone, depending on guitar sound you like.
Package List: 2 pcs A500K pots, coming with hex mounting nuts, flat washer and lock washer for custom height adjustment on a pickguard or control plate.
Audio taper (A type), 24 split knurled shaft, diameter approx. 1/4inch (6mm); Thread shaft diameter approx. 3/8inch (9.5mm). Shaft Length: 15.5mm. Deatil size, kindly refer to the dimension drawing. Thanks.

FLEOR Strat 2T1V Guitar Tone Volume Control Knobs and 5 Ways Toggle Switch Tip for Electric Guitar Parts, Red

Control Knobs: plastic, 2 piece Tones and 1 piece Volume knobs, red with white letter.
Set of control knobs and tip for Fender Stratocaster gutiar or similar replacement.
Tip: cross '+' slot style, 3.7mm diameter; 5-way selector swith tip.
Packae List: 2 piece tone knobs; 1 piece volume knobs; 2 piece switch tips.
Kindly check the dimension drawing before purchasing.

FLEOR Set of 11 Holes SSS Style Pickguard and Tremolo Cavity Cover Back Plate with Screws for US/Mexican Standard Fender Strat Guitar Parts,4Ply Red Tortoise

Style: SSS(single/single/single coil) style pickguard; 11 screws holes in the side of pickguard.
Fits for 11 Holes Mexican/American Made Fender Standard Stratocaster Modern Style.If you use it for other Strat style guitar, you may need a modification for line up.
Standard 6 screw mounting hole pattern back plate.Color is the same as the pickguard. Size please refer to the dimension picture.
SSS Pickguard with pure aluminum foil shield on the backside, better shielding property and anti-interference.
Package Includes:1 x sss guitar pickguard,1 x strat backplate,25 x mounting screws

FLEOR 4-Ply 8 Holes Scratch Front Plate Tele MINI Humbucker Pickguard for Telecaster Style Guitar Replacement,Grey Pearl,Mounted Screw

Pickup hole is cut for a Seymour Duncan mini humbucker,hole size = 28.5mm x 68.5mm(1.12 x 2.70inch).
Fits for American/Mexican Modern Standard Tele Style Mini Humbucker Pickguard Replacement.
Package Included:1 x guitar pickguard,25 x mounting screws.
Material:4Ply PVC & Celluloid Material,2.5mm/0.10 inch thickness.Color:Gray Pearl.(Gray Pearl/Black/White/Black).
Double layers protective films on the top. While using, remove it please.

FLEOR 8 Holes Strat Pickguard SSS Style Scratchplate and Tremolo Cavity Cover and Mounting Screw for Vintage Stratocaster Guitar,3Ply Black/White/Black

Pickguard: 8 mounting screw holes, SSS pickup routine((single/single/single coil). 3Ply PVC made, 2.3mm(0.09 inch) thickness.
Fits Fender USA/Mexican Made Standard Stratocaster Modern Style.If you use it for other Strat style guitar, you may need a modification for line up.
Pure aluminum foil on the backside. Color:Black.(Black/White/Black).
Package Included:1 x 8 holes sss guitar pickguard,1 x strat backplate, 25 x mounting screws.
Backplate: 6 mounting screw holes. 3Ply PVC made, 2.3mm(0.09 inch) thickness.

FLEOR 2PCS B250K Push Push Bounce Switch Potentiometer Linear Taper Pot Short Split Copper Shaft for Electric Guitar Bass Volume/Tone Controls

The low flux 250K ohm potentiometer, gives the guitar a little warmer sound, generally used with single-coil pickups. Note: there is no fixed formula for the tone, depending on guitar sound you like.
Ideal for electric guitar/bass building, for pickguard/control plate mounting. Can be used as a normal volume or tone control, or control pickup phasing, series/parallel switching, coil-taps, and more.
Package List: two piece B250K pots, coming with mounting nuts and flat washers.
Linear taper (B type), shaft diameter 1/4inch (6mm), thread shaft diameter 3/8inch (9.4mm), the whole shaft made of copper, with solder terminals. Push-Push guitar pots, 20mm short split shaft with coarse knurling, fits a coarse-knurled (18-spline) knob.
Easy operation, one downward touch does it all, no clutching and fumbling forever, there is no need to pull anymore, just Push & Push and play it, much easier to use than a push/pull pot.

FLEOR High Output Alnico 5 Guitar Pickup Double Coil Humbucker Pickups Neck and Bridge Set (Cream+Black)

Magnet: Alnico 5 humbucker pickup, 6 non-adjustable slug pole pieces & 6 adjustable screws pole pieces.
Compatible with electric guitar which can be installed humbucker pickup.
Resistance: Neck pick is 7-8K, bridge pickup is 8-9K.
Fully wax potted and sealed to eliminate any unwanted feedback and noise.
Color: zebra. Come with screws and springs, easy to install.

FLEOR Alnico 5 Electric Guitar Neck & Bridge Pickup Set Double Coil Humbucker Pickups-Black

Magnet: Alnico 5 humbucker pickup, 12 adjustable hexagonal screw pole pieces.
Compatible with electric guitar which can be installed humbucker pickup.
Resistance: Neck pick is 7-8K, bridge pickup is 8-9K.
Fully wax potted and sealed to eliminate any unwanted feedback and noise.
Color: black. Come with screws and springs, easy to install.

FLEOR 13-Hole Modern Style Standard Precision Bass Pickguard without Truss Rod Notch for 4 String P Bass Model, White Pearl

13 screw mounting holes in the side of pickguard without truss rod notch, No holes for thumb rest. Kindly check the dimension size before purchasing.
Pickguard for American/Mexico Standard Fender Modern style Precision Bass 4 string model guitar. Will not fit Squier or 5-string P Bass Guitar.
Smooth finished edge, 3ply PVC + 1ply Celluloid material plate, approx. 0.09-0.11inch thickness. Color: White Pearl.
Package List: 1 x Precision Bass Pickguard, 25 x mounting screws.
Double layers protective films on the surface to anti-scratch, kindly split it off after replacing. With pure aluminum foil shield on the backside.

FLEOR Full Face Guitar Pickguard SG Scratch Plate with Screws Fit SG Style Guitar Parts Replacement, 3 Ply Black/White/Black

With PAF Humbucker pickup holes, 11 screws holes on the side of the pickguard.
Fit SG style full face guitar pickguard replacement. Kindly check the dimension if suitable for your guitar before purchasing. (Size as picture shown.)
With double layers protective films on the top.
Package Included: 1pcs SG pickguard, 25pcs screws.
Material: 3Ply PVC plastic made. Color: black/white/black.

FLEOR 8 Holes HH Tele Pickguard Guitar Scratchplate for U.S./Mexican Fender Standards Telecaster Humbucker, Mounting Screws Included, 3ply Ivory White

Standard 8 screw mounting hole pickguard. Cut for a neck humbucker, size: 38mm x 70.5mm (1.50''x 2.78''). Neckpocket Cutout: 56mm/2.20''. Bridge Cutout: 87.5mm/3.44''.
Ideal for American/Mexican made Fender Telecaster with a standard humbucker route. Kindly check the dimension size before purchasing if suitable for your tele guitar.
Smooth finished edge, 3Ply PVC plate material, approx. 2.4mm/0.09'' thickness. Color: Ivory White.
Pickguard with double layers protective films on the surface, anti-scratch during installing. After installation, please tear off the film to prevent air bubbles.
Package List:1 x guitar pickguard, 25 x mounting screws.

FLEOR 4 Hole DIY Strat Guitar Pickguard Blank Mounting Screws fit American/Mexican Standard Fender Stratocaster Guitar Custom, 4Ply Red Tortoise

4 mounting screw holes,no pickup holes, so you can DIY design and cut the configuration by yourself.
Durable quality blank pickguard fit American/Mexican standard Fender Stratocaster guitar custom.
Pickguard with pure aluminum foil shield on the backside, double layers protective films on the top.
Package Included: 1 x blank strat pickguard, 1 x PVC template, 25 x Screws.
3Ply PVC & 1Ply Celluloid material, about 0.08-0.10 inch thickness. Size: refer to the drawing picture. Color: red tortoise.

FLEOR 52/52/52mm Strat Pickup Covers and 2 Tones 1 Volume Plastic Control Knobs Set 5-Way Switch Tip (Cross Style) & Whammy Bar Tip for Stratocaster, White

Pickup Covers: 52/52/52mm pole piece holes for single coil pickups.
Set of pickup covers, knobs and tips for Fender Stratocaster gutiar or similar replacement. Kindly check the dimension drawing before purchasing.
Tip: cross '+' slot style, 3.7mm diameter; 5-way selector swith tip. Whammy Bar Tip: about 5mm inside diameter.
Packae List: 3 piece strat covers; 2 piece tone knobs; 1 piece volume knobs; 2 piece switch tips; 1 piece tremolo arm whammy bar tip.
Control Knobs: plastic, 2 piece Tones and 1 piece Volume knobs, white with gold letter.

FLEOR 10 Hole Jazz Bass Pickguard 3Ply Scratch Plate without Truss Rod Notch for Fender Standard 4 String Model Jazz Bass Guitar, Black

10 screw mounting holes in the side of pickguard without truss rod notch, No holes for thumb rest. Kindly check the dimension size before purchasing.
Pickguard for American/Mexico Standard Fender Jazz Bass 4 String Model Guitar.
Smooth finished edge, 3ply PVC material plate, approx. 0.09-0.11inch thickness. Color: Black.
Package List: 1 x Jazz Bass Pickguard, 25 x mounting screws.
Double layers protective films on the surface to anti-scratch, kindly split it off after replacing.

FLEOR FAQs

You can purchase FLEOR products from the seller iknmusic Supplier, over the last 12 months, the seller has received honest feedback from 45 consumers, and the average rating is 4.72. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and FLEOR is worth your consideration.

Most of the FLEOR products are produced by iknmusic. The manufacturer provides FLEOR with a steady supply of products, and they have a good cooperative relationship with each other.