NOYITO feature image

NOYITO

Review rating Review rating Review rating Review rating Review rating 4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the NOYITO range from £15.77 to £31.46, and the average price of all the products is about £20.32. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

NOYITO offers 63 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The NOYITO review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

NOYITO Best Sellers

Last Updated: 15 Jun 2023

NOYITO Two-Stage Common-Mode AC EMI Power Filter 0 to 120V to 250V 2A 4A 10A 18A Filtering Board (18A)

Input voltage: AC 0 ~ 120 ~ 250V.
Product name: NOYITO Two-stage Common-mode AC EMI Power Filter
Output voltage: AC 0 ~ 120 ~ 250V.
Load rated current: 2A / 4A / 10A / 18A.
INPUIT Port: L / PE (GND) / N (three-wire 7.62 terminal block input). .OUTPUT Port: L / N (two-wire 7.62 terminal block output). .NOYITO DC EMI Power Filter ASIN : B0B9KQW12W

NOYITO AC to DC Precision Buck Power Supply Module AC 120V 220V (100V-264V) to 5V 5A 25 watts with Indicator Light Isolated Step-Down Power Module - Upgraded Version (5V 5A)

Input voltage range: AC 120V 220V (100 - 264V). Frequency range: 47-63Hz.
NOYITO AC to DC Isolated Precision Buck Power Supply Module ,Wide voltage range input with overload, short circuit, over temperature protection, high efficiency.
Ripple: less than 120mVp-p. Output accuracy: ±1%. Voltage regulation rate: ±1%.
Output voltage: 5V ±1%. Output current: 5A 5000mA. Output Power : 25 watts
Module size:100x50x28mm(LWH). Weight: 100 grams

NOYITO SSR-100AA Single Phase Solid State Relay AC Control AC Input Control Voltage AC 80-250V Control Load Voltage AC 24-380V

Input control voltage: AC 80 - 250V.
Product Name: NOYITO SSR-100AA Single Phase Solid State Relay / AC Control AC.
Product weight: 95 grams. Product size: 62x45x24mm (LWH). Mounting hole diameter: 4.8mm. Mounting hole spacing: 48mm.
Control terminal load voltage: AC 24 - 380V.
Control current: 3-35 mA.With work indicator.

NOYITO SSR-60DA Single Phase Solid State Relay DC Control AC Input Control Voltage DC3-32V Control Load Voltage AC 24-380V

Input control voltage: DC 3 - 32V.
Product Name: NOYITO SSR-60DA Single Phase Solid State Relay / DC Control AC.
Product weight: 95 grams. Product size: 62x45x24mm (LWH). Mounting hole diameter: 4.8mm. Mounting hole spacing: 48mm.
Control terminal load voltage: AC 24 - 380V.
Control current: 3-35 mA.With work indicator.

NOYITO HID Drive-Free USB Computer Control Switch Relay Module USB Smart Switch Control Plug and Play (2-Channel Micro-USB)

Onboard high performance HID control chip.With power LED indicator and relay status LED
NOYITO 1 / 2 / 4 / 8-Channel USB / Micro USB Relay Module is equipped with a stable HID control chip. It can use the HID debugging software to send commands on the computer to control the opening and closing of the relays.
Working current: 20mA +1 relay triggers 70mA. (NOTE: The output voltage of the USB port of the computer is DC5V, Current ≤ 500mA. So, an external power supply is required to trigger the 8-channel relay module, and the external power supply is ≥5V1A)
On-board 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously.
NOYITO HID Drive-free USB Computer Control Switch Relay Module Debugging Software www.amazon.com/clouddrive/share/30Y2Mf46RhdbwqpRSe8SPE7v3e2YnGOnoMagyRVhnkT

NOYITO 4-Channel Micro USB Relay Module USB Smart Control Switch USB Intelligent Control Switch

Onboard high performance microcontroller chip, CH340 USB control chip. Relay ON/OFF status query command: 0xFF.
NOYITO 4-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 4-channel relay.
[IMPORTANT TIPS] Power supply voltage: DC5V. Support USB power supply/external power supply switching. Toggle the switch to "Usb_P" for USB power supply, and toggle the switch to "Ext_p" for external power supply.(External power supply interface: connect to the power supply 5V, because the output current of the USB port is limited, it is recommended to use an external power supply when using more than 2 relays)
On-board 5V relay, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously.
Module with overcurrent protection and relay diode freewheel protection.With power LED indicator and relay status LED.

NOYITO 8-Channel Micro USB Relay Module USB Smart Control Switch USB Intelligent Control Switch

Onboard high performance microcontroller chip, CH340 USB control chip. Relay ON/OFF status query command: 0xFF.
NOYITO 8-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 4-channel relay.
[IMPORTANT TIPS] Power supply voltage: DC5V. Support USB power supply/external power supply switching. (External power supply interface: connect to the power supply 5V, because the output current of the USB port is limited, it is recommended to use an external power supply when using more than 2 relays)
On-board 5V relay, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously.
Module with overcurrent protection and relay diode freewheel protection.With power LED indicator and relay status LED.

NOYITO Multi-Function Color Digital Meter Display four Parameters AC Voltage AC Current Power Electric Energy Meter With Power-down Memory Function

AC voltage measurement range: AC 40.0-300.0V
NOYITO Multi-function digital meter can measure and display AC voltage, AC current, power and electric energy at the same time. The display part of meter use high-definition color LCD screen. With power-down memory function
Power measurement range : 0-45000W. 0-9999.9W minimum display resolution is 0.1W, otherwise Minimum resolution is 1W.
Electric energy: 0-9 999 999kwh. 0-9999.999kwh minimum resolution is 0.001kwh ; 10000,00-99999.99kwh minimum resolution is 0.01kwh ; 100000.0-999999.9kwh minimum resolution is 0.1kwh; Otherwise minimum resolution is 1kwh
AC current measurement range : AC 0-99.99A, Minimum resolution is 0.01A.

NOYITO 4-Channel 24V Computer USB Control Switch Relay Module Drive-Free Relay Module Plug and Play Suitable for PC Smart Controller

Onboard square USB interface, stable connection; use of high-performance USB control chip; use dedicated relay driver chip ULN2803, relay work more stable;
The module uses HID technology, without any driver, plug and play. Support WIN10 ,7, XP 32-bit, 64-bit system, easy to use simple.
Power outlet and terminal, two access power mode convenient and flexible. After connecting the power, even if the computer shut down or USB from the computer pull out, the relay can also maintain the set state.
PCB size: 71.6mm * 65.3mm, fixed hole size: 3mm, fixed hole center moment: 67.4mm * 61.3mm..NOYITO USB Relay External Use Development Library www.amazon.com/clouddrive/share/mI90aY9Ju2XDZhrUX9ZHzz6yAYpOvELp0fKcZxrrsNv
NOTE: The 1-Channel 2-Channel module does not require an external power supply. 4-Channel 8-Channel modules require an external module power supply.

NOYITO 51 AVR ATMEGA8 Programmer USBASP V2.0 USB ISP Downloader 10 Pin USB Programmer 3.3V 5V with Cable (Pack of 2)

The output port is an ATMEL standard port. With overcurrent protection.Automatic speed control.With power and write indicator lamp.With USB power and target board support target voltage 5V, can choose by jumper cap connection.
NOYITO 51 AVR ATMEGA8 Programmer , Main Chip:ATMega8A-AU.Support AVR and ASP chip.Support AT89S51/52 microcontroller.
Reserved programming interface, the user can upgrade the download firmware.
Reserve MOSI, MISO,RET,SCK,VCC,GND. 6pin interface, user-friendly interface to connect the target board.
Autospeed autofocus firmware, the downloader will automatically track the chip frequency to be programmed, automatically change the speed, to achieve automatic speed control.

NOYITO 2-Channel Micro USB Relay Module USB Smart Control Switch USB Intelligent Control Switch (2-Channel Micro USB)

Onboard high performance microcontroller chip, CH340 USB control chip.
NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay.
With power LED indicator and relay status LED.
On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously.
Module with overcurrent protection and relay diode freewheel protection.

NOYITO 2-Channel Programmable Time Relay Module Dual Relays Triggered in Turn or Individually 2-Channel 0-99.9V Voltage Detection Control Board Cyclic Timing On Off (24V)

Each group of relay contacts to a common and normally open, normally close, two sets of conversion; Dual time relay, timer range: 0.1 seconds ~ 9999 minutes adjustable, close/ open cycles is adjustable from 0 to 999 ( “0” means infinite loops ) , timer relays can be set to close first or open first;
Such as control two loads simultaneously or alternately ON/OFF, single-phase motor positive and reversion according to the timing, or DC motor positive and reversion, or dual solenoid valve timing work in rotation (controlled pneumatic) or dual alternating bright lights etc.
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Dual relay can take turns running, after the end of timer relay A then timer relay B began to run, turn the cycle ,the timer can be triggered by high level or switch to start and forced stop (P-3 mode ) ; Dual relay run individually, can be high or switch to trigger the start (P-4 mode) ; Dual voltage detection control relays, the detection voltage range: DC 0 ~ 99.9V; All parameter settings can be saved, the next time modes and parameters continue to the last running. .User Manual www.

NOYITO 48V 3A 144W AC to DC Adapter AC 120V 100-240V 50 60 Hz to 48V Power Supply Charger Transformer DC 5.5x2.5 2.1mm Interface Suitable for LED Strip Light CCTV Camera POE Switch

Output voltage: DC 48V 3A 144W;
Input voltage: AC 120V 100-240V 50/60Hz;
The adapter output current is adaptive and backward compatible. ((The current output is automatically adjusted according to the power of the powered device. For example: 48V 3A can be applied to 48V2A, 48V1A devices.) ).
Protection function: overcharge protection, high voltage protection, over current protection, over power protection, high temperature protection, short circuit protection, lightning protection, electromagnetic field protection.
Interface: 5.5x2.5 / 2.1mm (Internal interface springs, compatible with 5.5x2.5 / 2.1mm interface. Please make sure that your device interface is matched with this power supply before purchase. Incorrect interface matching will result in Power does not work).

NOYITO AC to DC Isolated Power Supply Module DC 24V 4A 3.3 V 1A Dual Output Power AC 120V (90-265V) 50-60Hz to 24V 3.3V 120W Max Industrial Power Module (Dual Output 24V 4A, 3.3V 1A, Blue)

The power supply has overcurrent protection, overload protection and short circuit protection.
The power module uses double-sided PCB design, stable performance, and reliable! Suitable for power supply for civil and industrial control systems!
Power: 120W Max. Ripple noise: ≤200MV
Output: Dual output. DC 24V 4A, DC 3.3V 1A (if up to 1A output, need to strengthen the power module cooling).
Input voltage: AC 120V 90-265V 50/60Hz . (Wide voltage input, suitable for various use conditions).With indicator.

NOYITO MAX7219 Dot Matrix Module 4 in 1 Display Module Blue Red Green Three Colors with 5Pin Line - Upgrade (Blue)

It includes an on-chip B-type BCD encoder, multi-channel scan loop, segment word driver, and an 8x8 static RAM to store each data. Only one external register is used to set the segment current of each LED.
The MAX7219 is an integrated serial input/output common-cathode display driver that connects a microprocessor to an 8-digit digital 7-segment LED display, or a bar graph display or 64 separate LEDs.
There are three colors: red, blue, and green (The blue and green products are upgraded based on user feedback)
The entire device includes a 150μA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display 1-8 bits of data, and a detection mode that allows all LEDs to illuminate.
A convenient four-wire serial interface can be connected to all common microprocessors. Each data can be addressed without any need to overwrite all displays when updating. The MAX7219 also allows the user to choose whether to encode or not encode each data.

NOYITO 16mm 19mm Chassis Switch Host Metal Button Switch with 2ft Extension Cable Red Yellow Blue Green White Switch Symbol Suitable for Computer DIY Switch - Upgrade (19mm Yellow)

There are two types of switches: 16mm and 19mm. Both types of switches have cable with cable length of approximately 0.6 meter / 2ft (Please read the second and third picture on the left for the dimension of the switch).
NOYITO 16mm 19mm Chassis Switch Metal Button Switch With 0.6 meter / 2ft Extension Cable ,Red Yellow Blue Green White LED Ring Switch Symbol 5 colors are available for you to choose from. Based on the user's feedback, we have upgraded the wire so that it can withstand instantaneous currents up to 10A,and the use of 16mm / 19mm large volume buttons. With silicone waterproof Ring
The rated voltage and current of the LED of the switch: rated voltage 3-6V, rated current ≤ 20mA.Switch rated load : 16mm switch - AC / DC 0-220V 5A Max. 19mm switch - AC / DC 0-220V 10A Max .
Switch type: Fast moving single contact. [Push & Hold - ON ] ; [Release - OFF] . Waterproof grade IP67 , Explosion grade IK10( metal material)
Suitable For DIY Computer Switch and Restart Button .

NOYITO 16mm 19mm Chassis Switch Host Metal Button Switch with 3.28ft Extension Cable Red Yellow Blue Green White Switch Symbol Suitable for Computer DIY Switch - Upgrade (19mm Yellow)

There are two types of switches: 16mm and 19mm. Both types of switches with cable length of approximately 1 meter / 3.28ft (Please read the second and third picture on the left for the dimension of the switch).
NOYITO 16mm 19mm Chassis Switch Metal Button Switch With 3.28ft Extension Cable , Red Yellow Blue Green White LED Ring Switch Symbol 5 colors are available for you to choose from. Based on the user's feedback, We have upgraded the wire so that it can withstand instantaneous currents up to 10A, and the use of 16mm / 19mm large volume buttons. With silicone waterproof Ring
The rated voltage and current of the LED of the switch: rated voltage 3-6V, rated current ≤ 20mA.Switch rated load : 16mm switch - AC / DC 0-220V 5A Max. 19mm switch - AC / DC 0-220V 10A Max .
Switch type: Fast moving single contact. [Push & Hold - ON ] ; [Release - OFF] . Waterproof grade IP67 , Explosion grade IK10( metal material)
Suitable For DIY Computer Switch and Restart Button .

NOYITO MAX31855 K-Type Thermocouple Breakout Board Thermocouple Sensor Module Temperature -200°C to +1350°C SPI Interface Digital Direct Readability Temperature

Thermocouples are very sensitive, suitable for probes, K thermocouple. SPI interface, high-speed transmission
Only applicable to MKS SBASE, not applicable to other 2560 series motherboards. Measure temperature range: -200°C to +1350°C
Size: 20mm X 23mm; Positioning hole distance: 15mm; Diameter: 3mm
Direct digital output temperature value, no amplifier, no ADC. Input voltage: 3-5v DC
14 bit resolution, 0.25 degree temperature accuracy.

NOYITO 4-Channel 16-Bit ADC with PGA for RPI Raspberry PI 16 Bits I2C ADS1115 Module ADC 4 Channel for Raspberry Pi 3 2 Model B B+

The data is transmitted through the I2C-compatible serial interface. It has 4 I2C addresses to choose from, and the working power supply only needs 3.3V.Its main function is to detect analog signals and convert them into digital signals.
The RPi-ADS1115-ADC module is a precision analog-to-digital converter (ADC). The ADS1115 is a chip that provides 16-bit sampling accuracy in an ultra-small MSOP-10 package.
You can use the analog signal's joystick or other analog sensors such as NTC, temperature, and dust sensors to access the Raspberry Pi through the RPi-ADS1115-ADC module to capture analog signals through the Raspberry Pi reading device.
Here comes the perfect solution for adding a VGA screen to your Raspberry Pi. What is better, it is so much cheaper than an HDMI to VGA adapter.This VGA connection is driven natively in hardware over the GPIO pins using a parallel interface and it takes around the same CPU load as the HDMI connection on board. It is capable of displaying 1080P VGA video with zero CPU load. You may drive this interface with the HDMI connection at the same time to even set up dual screens.

NOYITO FAQs

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and NOYITO is worth your consideration.

Most of the NOYITO products are produced by NOYITO TECHNOLOGIES. The manufacturer provides NOYITO with a steady supply of products, and they have a good cooperative relationship with each other.