Heat Shield feature image

Heat Shield

Review rating Review rating Review rating Review rating Review rating 4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Heat Shield range from £9.99 to £374.33, and the average price of all the products is about £84.31. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Heat Shield has a relatively small number of products for sale, only 36. We analyzed some of them in detail and recommended them to our readers. The Heat Shield review aims to sharpen your understanding of the brand and introduces you to their bestselling products. Just keep reading!

Heat Shield Best Sellers

Last Updated: 15 Jun 2023

Heatshield 340001 Thermaflect Tape, 1 1/2" X 3'

Capable of reducing up to 90 percentage of radiant heat
Continuous operating reflective temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
Helps shield fuel lines, brake lines, wire looms and more from radiant heat
Adhesive backing sticks to almost any clean surface

CookSpace (TM) Pair of Silicone Heat Flame Fire Resistant Oven Gloves

1 pair protective oven gloves by CookSpace (registered trademark UK00003094172)Silicone texturing on both sides of glove and on all fingers gives superb grip Tough exterior material is made of Nomex and Kevlar due to their heat resisting properties Inner material is soft double knit cotton for comfort
THE PREMIER WAY TO PROTECT YOUR HANDS - Oven Grill Gloves are a true innovation in heat protection for the oven, stove top, and outdoor grill. These BS6526 Certified gloves utilize the powerhouse combination to create the next generation of extreme heat safety!
Safety is our top priority: Be wary of other gloves as the wrist elastic does not meet safety approval and ours the cuff is 14cm opening so in any event to remove your hand from the glove is very easy
INGRAINED VERSATILITY - Whether it's moving wood around in a campfire, flipping meat on the grill, or removing piping hot pans from the oven, you'll be fully protected up to 932 degrees! No matter where you are or what you are doing you can stay protected while retaining full dexterity in your hand movements.
COMFY - Lined with comfort inducing cotton on the inside, these gloves prevent your hand from getting stuck. Opening jars or anything that required just a little added grip strength is a snap with our raised silicone grips! These kitchen aids are super pliable, reducing fatigue in your hands, and letting you cook longer, stronger

Heatshield 204002 HP Fuel Builders Kit

Capable of reducing up to 60 percentage of radiant heat
Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
Special weave that allows it to expand and contract over fittings
Helps to prevent Vapor lock, protects wires from melting, Shields oil and brake lines

Heatshield 371025 Lava Wrap, 1" 15', 25', 2" X 50'

Reduces under hood temperatures up to 50 percentage
Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
Increases horsepower
All rolls of exhaust wrap are 1/16 inches thick

Heatshield 240003 Hp Hose Sleeve

Capable of reducing up to 60 percentage of radiant heat
Continuous operating temperature of 1200 degree Fahrenheit, 2000 degree Fahrenheit intermittent
Sleeving wall thickness is 1/16 inches
Helps to prevent Vapour lock, protects wires from melting

Heatshield 501000 HP Starter Shield, Red, Black

Prevents starter heat soak so you are not stranded
Rated for 1100 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
Easy installation, starter removal is not necessary

Heatshield 274100 Thermaflect Sleeve Hose and Line Protection Wiring Shield

Capable of reducing up to 90 percentage of radiant heat
Continuous operating reflective temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
Made in the USA
Hook and loop seam allows installation without component assembly
Helps to prevent Vapor lock, Lower air intake temperatures, protects wires from melting

Heatshield 170001 Armour Exhaust and Manifold Reflective Shield, 0

Reduces radiant heat by 70 percentage
Continuous operating temperature of 1800 degree Fahrenheit, 2200 degree Fahrenheit intermittent
The ideal heat shield insulation for your down pipe, DPF or high performance application
Simple installation, install in minutes
0.003 inch thick armor layer, can be cleaned after installation

Heatshield 350014 Thermal-Tie Heat Shield Strap Barrier Fastener, Set of 4, 3/16-inch x 14-inch, Set of 6

304 and 316 stainless steel locking ties
Continuous operating temperature of 1800 degree Fahrenheit
This material is Electrically conductive, be sure to insulate any terminals that might come in contact with this Product
The heavy duty tie features 45 percentage more gripping power
Made in the USA

Heatshield 352002 Thermal Spring Mounting Kit

Constructed of 302 stainless steel
Use to hold your turbo heat shield or manifold shield in place
Rugged, handles high heat and high strength
2-inch rest, max length 5.6-inch
2 Springs included

Heatshield 204011 Hot Rod Sleeve, 3/8" id X 10

Capable of reducing up to 60 percent of radiant heat
Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
Special weave that allows it to expand and contract over fittings, terminals and more
Helps to prevent Vapor lock, protects wires from melting, Shields oil and brake lines

Heatshield 372005 Lava Wrap Exhaust Protection, 2-inch x 15

Reduces under hood temperatures up to 50 percentage
Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
Made in the USA
Increases horsepower
All rolls of exhaust wrap are 1/16 inches thick

Heatshield 312025 Exhaust Wrap Protection, 2-inch x 25

Reduces under hood temperatures up to 50 percentage
Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
Made in the USA
Increases horsepower
All rolls of exhaust wrap are 1/16 inches thick

Heatshield 321025 Black Exhaust Wrap

Reduces under hood temperatures up to 50 percentage
Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
Increases horsepower
All rolls of exhaust wrap are 1/16 inches thick

Heatshield 400204 Insul-Boot Spark Plug Heat Sock Wiring Protection, Black, Set of 2

Reflects and dissipates heat
Rated for 1200 degree Fahrenheit continuous use and 2000 degree Fahrenheit intermittent
Made in the USA
Double wall construction
1 inch Inner Diameter, fits most spark plug boots even 90 degrees

Heatshield 300545 Stealth Turbo Shield, Blanket and Cover, Large/Mid-Frame

Capable of reducing up to 60 percent of radiant heat
Continuous operating temperature of 1800° Fahrenheit, 2200° Fahrenheit intermittent
Reduces Turbo Blk-Orange-Stripe, lowers under hood temperatures
Made in the USA
Custom fit, installs in minutes, includes stainless steel springs

Heatshield 300005 HP Turbo Shield, Blanket and Cover, Large/Mid-Frame

Capable of reducing up to 60 percentage of radiant heat
Continuous operating temperature of 1800 degree Fahrenheit, 2200 degree Fahrenheit intermittent
Reduces Turbo Blk-Orange-Stripe, lowers under hood temperatures
Made for T3 and T4 Flange TURBOS
Custom fit, installs in minutes

Heatshield 300076 Lava Turbo Shield Blanket and Cover

Capable of reducing up to 60 percentage of radiant heat
Continuous operating temperature of 1800 degree Fahrenheit, 2200 degree Fahrenheit intermittent
Superior design with silica contact layer, won't melt like similar volcano Turbo Shields
Reduces Turbo Blk-Orange-Stripe, lowers under hood temperatures
Custom fit, installs in minutes

Heat Shield FAQs

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Heat Shield is worth your consideration.

Most of the Heat Shield products are produced by Heatshield and Heatshield Products. The manufacturer provides Heat Shield with a steady supply of products, and they have a good cooperative relationship with each other.