Borg & Beck feature image

Borg & Beck

Review rating Review rating Review rating Review rating Review rating 4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Borg & Beck range from £3.03 to £237.9, and the average price of all the products is about £31.44. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Borg & Beck offers a variety of products, there are 306 products available, 20 of which were analyzed in detail and recommended to customers. The Borg & Beck review aims to sharpen your understanding of the brand and introduces you to their bestselling products. Just keep reading!

Borg & Beck Best Sellers

Last Updated: 14 Jun 2023

Borg & Beck BRC119 Radiator Cap,yellow|black|white

Pressure [psi] to: 21
Material: plastic
Specification: for expansion tank
Pressure to [bar]: 1.45

Borg & Beck BFC1179 Activated Carbon Filter

If an activated carbon reference is available, this is the best choice as it will trap not only solid particles, but also harmful gases such as sulphur dioxide, nitrogen dioxide, carbon monoxide and ozone
Borg & Beck offers standard and activated carbon references to filter 99% of harmful pollutants found in the air – It is recommended that these are replaced every year or every service, whichever comes first.
Through adsorption, activated carbon adsorbs unpleasant odours preventing them from entering the cabin, keeping the air clean and fresh
Each reference is supplied with fitting instructions to provide a hassle-free replacement plus, they are supported by a comprehensive warranty for total peace of mind
All Filters are Manufactured to OE specification to ensure optimum performance and longevity. During production, all Filters are fully tested & quality checked for premium quality assurance

Borg & Beck BSK7693K Suspension (Roll Bar Bush Kit) Front LH/RH

Designed with specific rubber shore hardness for each part
Premium quality product manufactured to OE specification
Swaged inner tubes used, where applicable, for increased bonding area
Quality rubber to metal bonding agents used for increased durability
Hydraulically filled mounts available, matching original specification

Borg & Beck BBP2524 Rear Brake Pads - Includes Wear Indicators/Leads (Bosch)

Copper Free – Environmentally friendly, less corrosive on Disc compared to more coarse formulations as seen on alternative pads
Highly specified compound made from fine metallic fibres consistent with OE formulation
Integral wear leads, sensors, bolts and accessories to match OE product offer where required
Chamfered and grooved to match consistency of OE design
BECKTEC Double Rubber Shimmed, designed by world leaders to provide improved noise reduction and anti-rattle qualities

Borg & Beck BW11R 11" Rear Wiper Blade (Single)

Nano graphite coated blade for optimum performance and longevity
High strength galvanised zinc steel frame with UV coating
Comes complete with a full set of adapter clips for installation on 99.9% of Wiper Arm types - Simply see side of packaging to match adaptor clip with arm style and fit with ease

Borg & Beck BFC1244 Cabin Filter

If an activated carbon reference is available, this is the best choice as it will trap not only solid particles, but also harmful gases such as sulphur dioxide, nitrogen dioxide, carbon monoxide and ozone
Borg & Beck offers standard and activated carbon references to filter 99% of harmful pollutants found in the air – It is recommended that these are replaced every year or every service, whichever comes first.
Through adsorption, activated carbon adsorbs unpleasant odours preventing them from entering the cabin, keeping the air clean and fresh
Each reference is supplied with fitting instructions to provide a hassle-free replacement plus, they are supported by a comprehensive warranty for total peace of mind
All Filters are Manufactured to OE specification to ensure optimum performance and longevity. During production, all Filters are fully tested & quality checked for premium quality assurance

Borg & Beck BFF8206 Fuel Filter

All Filters are fully tested & quality checked during production for premium quality assurance
Filter media specified to meet the requirements of each engine manufacturer to ensure optimum fuel purity and reduce wear of engine parts including injectors, fuel pumps and pressure valves.
Supplied with a comprehensive warranty for total peace of mind
Manufactured to OE specification to ensure optimum performance and longevity
Each reference is supplied with fitting instructions to provide a hassle-free replacement plus, they are supported by a comprehensive warranty for total peace of mind

Borg & Beck BTS216.82 Coolant Thermostat

Part number: BTS216.82
Temperature range [°C]: 82
Brand New

Borg & Beck BSK7407 Suspension Bush (Suspension Arm Bush) Front Upper LH/RH

Designed with specific rubber shore hardness for each part
Premium quality product manufactured to OE specification
Swaged inner tubes used, where applicable, for increased bonding area
Quality rubber to metal bonding agents used for increased durability
Hydraulically filled mounts available, matching original specification

Borg & Beck BBT032 Coolant Thermostat

Temperature range [°C]: 80
Supplementary Article/Supplementary Info: with gaskets/seals
Part number: BBT032

Borg and Beck BKC1479 Clutch Cabl Auto Adj

Part number: BKC1479
Length [mm]: 1730
Brand New

Borg & Beck BCA7417 Suspension Arm Front Lower LH

E-Coated (Cataphoresis) for maximum protection / high corrosion resistance
Premium quality product manufactured to OE specification
High quality Chloroprene rubber dust cover boots on joints, with quality fixing clips
Fully tested for Ball Pin Push / Pull out and rotational torque specification

Borg & Beck BBP2516 Rear Brake Pads (Ate - Teves)

Copper Free – Environmentally friendly, less corrosive on Disc compared to more coarse formulations as seen on alternative pads
Highly specified compound made from fine metallic fibres consistent with OE formulation
Integral wear leads, sensors, bolts and accessories to match OE product offer where required
Chamfered and grooved to match consistency of OE design
BECKTEC Double Rubber Shimmed, designed by world leaders to provide improved noise reduction and anti-rattle qualities

Borg & Beck BFO4245 Oil Filter

All Filters are fully tested & quality checked during production for premium quality assurance
All elements within the filter e.g. the media paper, valves, and springs meet the OE specification requirements to maintain high quality filtration and reduce wear.
Supplied with a comprehensive warranty for total peace of mind
Manufactured to OE specification to ensure optimum performance and longevity

Borg & Beck BBD4699 Brake Disc Pair (Rear) & BBP2424 Rear Brake Pads - Includes Wear Indicators/Leads (Mando)

Product 1: Can be installed straight from the box – No transit oil, therefore nothing to clean off first!
Product 1: BECKTEC Coated Discs – Finished with a water-based zinc aluminium flake coating to prevent corrosion and improve thermal efficiency
Product 2: Highly specified compound made from fine metallic fibres consistent with OE formulation
Product 2: Copper Free – Environmentally friendly, less corrosive on Disc compared to more coarse formulations as seen on alternative pads
Product 2: BECKTEC Double Rubber Shimmed, designed by world leaders to provide improved noise reduction and anti-rattle qualities
Product 1: High in Carbon – Improves thermal efficiency, minimises distortion and noise potential and increases longevity of the product

Borg & Beck BFC1258 Cabin Filter

If an activated carbon reference is available, this is the best choice as it will trap not only solid particles, but also harmful gases such as sulphur dioxide, nitrogen dioxide, carbon monoxide and ozone
Borg & Beck offers standard and activated carbon references to filter 99% of harmful pollutants found in the air – It is recommended that these are replaced every year or every service, whichever comes first.
Through adsorption, activated carbon adsorbs unpleasant odours preventing them from entering the cabin, keeping the air clean and fresh
Each reference is supplied with fitting instructions to provide a hassle-free replacement plus, they are supported by a comprehensive warranty for total peace of mind
All Filters are Manufactured to OE specification to ensure optimum performance and longevity. During production, all Filters are fully tested & quality checked for premium quality assurance

Borg & Beck BW14R 14" Rear Wiper Blade (Single)

Nano graphite coated blade for optimum performance and longevity
High strength galvanised zinc steel frame with UV coating
Comes complete with a full set of adapter clips for installation on 99.9% of Wiper Arm types - Simply see side of packaging to match adaptor clip with arm style and fit with ease

Borg & Beck HKF1066 DMF to SMF Conversion Kit

Contains all necessary components to replace a Dual Mass Flywheel and convert to Single Mass
Genuine Borg & Beck Dual Mass Flywheel Conversion Kit
SMF kits will be cheaper and last longer than a DMF equivalent in high demand applications
Ideal for vehicles with heavy usage, e.g. vans, taxis, towing where the original DMF is unable to cope with the heat build up
Designed & Tested in technical facility in the UK to manage and control product specification and development

Borg & Beck BFC1224 Cabin Filter

If an activated carbon reference is available, this is the best choice as it will trap not only solid particles, but also harmful gases such as sulphur dioxide, nitrogen dioxide, carbon monoxide and ozone
Borg & Beck offers standard and activated carbon references to filter 99% of harmful pollutants found in the air – It is recommended that these are replaced every year or every service, whichever comes first.
Through adsorption, activated carbon adsorbs unpleasant odours preventing them from entering the cabin, keeping the air clean and fresh
Each reference is supplied with fitting instructions to provide a hassle-free replacement plus, they are supported by a comprehensive warranty for total peace of mind
All Filters are Manufactured to OE specification to ensure optimum performance and longevity. During production, all Filters are fully tested & quality checked for premium quality assurance

Borg & Beck BTS1010 Coolant Flange/Pipe

Material: plastic
For OE number: 068121133AB
Part number: BTS1010

Borg & Beck FAQs

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Borg & Beck is worth your consideration.

Most of the Borg & Beck products are produced by First Line Ltd.. The manufacturer provides Borg & Beck with a steady supply of products, and they have a good cooperative relationship with each other.