Cen-Tec Systems

4.8

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Cen-Tec Systems range from £8.65 to £486.67, and the average price of all the products is about £66.22. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Cen-Tec Systems offers a variety of products, there are 203 products available, 20 of which were analyzed in detail and recommended to customers. This Cen-Tec Systems review will give you insight into the products they offer so you can make a better informed decision before you make your purchase.

Cen-Tec Systems Best Sellers

Last Updated: 14 Jun 2023

Cen-Tec Systems 94247 Quick Click Two Piece Power Tool Dust Extraction Adaptor Set (25, 35, 38 and 48mm) Compatible with Bosch, Festool, DeWalt, Milwaukee, Festool, Fein, Hitachi, Einhell and Others

Vacuum & Dust Collector Hoses Vacuum & Dust Collector Couplings

Buy on Amazon Find on eBay

The hose thread is compatible with 32mm hoses for vacuums such as Numatic (Henry), Nilfisk, Titan, Sealey, Vax, and any various ShopVac brand or 32mm hose wet and dry vacuums

Power tool adaptor Kit contains 2 x bayonets; 2 x air relief; 25-35mm adaptor; 38-48mm adaptor; 32mm threaded hose connector; and a clip ring

Small adaptor sizes are 25mm Internal Diameter (ID) female friction and 35mm Outer Diameter (OD) male friction. Larger adaptor is 38mm ID female friction and 48mm OD male friction

Comes with quick click system for connecting to the exhaust port of hand held and stationary power tools. Swivel neck permits 360 degree movement at the adaptor and hose connection

Air relief allows the user to adjust the suction of the vacuum to the power tool. Avoids power tools from sticking to surfaces with the use of a vacuum

Read more Read less

Cen-Tec Systems Quick Click Hose for Home and Shop Vacuums with Two Piece Power Tool Adaptor Set for Dust Extraction (5m)

Vacuum & Dust Collector Couplings

Buy on Amazon Find on eBay

Compatible with major power tool brands including Bosch, Ryobi, Makita, DeWalt, Festool, Fein, Cobalt, Porter Cable, Hitachi, Milwaukee Electric and many more

Power tool adaptor ends include a 25/35mm (ID/OD) adaptor and 38/48mm

Compatible with home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 58mm vacuum connection

Changing from one adaptor to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool

5mx32mm highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow

Read more Read less

Cen-Tec Systems 92705N 2.5m Extra Long Vacuum Hose Compatible with Henry and Other Numatic Vacuums Including Hetty, Charles, James, George, Edward, Harry and Nuvac

Numatic Vacuum Hoses Vacuum Hoses

Buy on Amazon Find on eBay

Crushproof and flexible vacuum hose has corrugated ribs and a smooth bore for improved airflow

2.5m replacement Henry/Numatic hose is compatible with all 32mm Numatic vacuums which includes the following: Henry, Hetty, Charles, James, George, Edward, Harry, Nuvac

Rotating swivel machine end and hose cuff negate the hose kinking and snagging

Non-genuine high quality replacement vacuum hose

Ideal for cleaning large rooms, offices, schools, car valeting and other similar environments

Cen-Tec Systems 94698 Quick Click 3m Hose for Home and Shop Vacuums with Five Piece Power Tool Adaptor Set for Dust Collection

Vacuum & Dust Collector Hoses

Buy on Amazon Find on eBay

Compatible with branded tools including but not exclusive to Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric

32mm diameter X 3m silver commercial grade vacuum hose to connect most major brands of home shop vacuums to a wide range of power tools with dust ports 19, 25, 32 and 38mm external and 32, 35, 42, 48 and 58mm internal diameters

Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool

Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting

58mm vacuum fitting is compatible with most home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 58mm vacuum connection

Read more Read less

MPL Floorcare 58566 270mm Universal Floor Tool for 32mm Tubes with Major Vacuum Brands - Numatic (Henry, Hetty etc.), Hoover, Vax, Nilfisk - Suitable for Hard Floor and Carpet Cleaning

Vacuum Nozzles

Buy on Amazon Find on eBay

Compatible with Numatic, Henry, Hetty, Hoover, Vax, Nilfisk, Viper, Taski and any other 32mm vacuum Tubes. Please check vacuum wand/adaptor before purchase

Universal 32mm lightweight vacuum Cleaner floor tool for carpets and hard floors

Pedal Combination Floor Tool is 270mm wide with a 32mm neck

High quality replacement floor tool

Colour – Black

Cen-Tec Systems 35269B Universal 32mm Air Turbine Floor Tool Airo Brush Nozzle for Henry, Hetty and Numatic Vacuum Cleaners - Black

Vacuum Nozzles

Buy on Amazon Find on eBay

Compatible with Numatic, Henry, Hetty, Hoover, Vax, Electrolux, Nilfisk and any other 32mm vacuum hose connection. Please check vacuum tube/wand before purchase

Universal 32mm wheel mounted 270mm air turbine is ideal for vacuuming carpets

Quality, non-genuine replacement air turbo for vacuums such as Henry, Hetty, Basil, Charles and more in the Numatic Homecare range

Makes lightweight of pet hair and other debris found on carpets due to the enhanced suction created by the air driven turbine

32mm connection to the vacuum wand/tube is typical of most domestic vacuums

Cen-Tec Systems 34905 Hard Floor Tool Compatible with Domestic Home Vacuum Cleaners such as Numatic (Henry) - 32mm x 305mm

Vacuum Nozzles

Buy on Amazon Find on eBay

Brush is a soft natural fill that is extra heavy to support the brush on any hard floor surface, again gliding effortlessly so there is no risk of damage to expensive finishes

305mm width allows for a large cleaning path per stroke

extra thick fill will even handle uneven surfaces without issue, and the wide cleaning orifice will capture large debris while delivering the power of the vacuum to the far edges of the tool

Designed for dry vacuum use on all types of hard floors such as Vinyl, Tiles, Wood & Parquet

32mm floor to is compatible with many vacuum brands including: Numatic, Electrolux, Nilfisk, Vax, Kerstar and many more

Cen-Tec Systems 50778 Premium Flexible Crevice 610mm Extra Long Ergonomic Compatible with 32mm Vacuums Including Numatic, Henry, Hetty, Harry, Charles, George and James

Vacuum Nozzles

Buy on Amazon Find on eBay

Flexible tool easily bends under and around objects, making it perfect for cleaning hard to reach areas, including those tricky spots behind radiators, under units, and beneath car seats

32mm crevice tool is compatible with all 32mm vacuums including Numatic, Henry, Hetty, Harry, Charles, George and James

Premium and affordable non-genuine crevice tool

Perfect complimentary accessory to your vacuum

Allows the user to not have to bend and stretch to get at those hard-to-reach areas

Cen-Tec Systems 94731N Quick Click 9m Numatic Hose with Five Piece Power Tool Adaptor Set for Dust Collection

Vacuum & Dust Collector Hoses

Buy on Amazon Find on eBay

Adaptor set internal diameters: 19, 25, 32 and 38mm. Adaptor Set outer diameters: 32, 35, 42, 48, 58mm

Quick Click is compatible with various tools from many tool brands including Bosch, Ryobi, Makita, Dewalt, Festool, Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric

Highly flexible commercial grade 32mm vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow

Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool

9m non-genuine Numatic hose is compatible with the Numatic HomeCare range and the CleanCare and ProCare ranges with 32mm machine ends

Read more Read less

Cen-Tec Systems 93158 9m Premium Shop Vacuum Extension Hose for Cleaning Workshops, Garages and Cars with Vacuum Brands Including Shop-Vac, Vacmaster, Craftsman, Dewalt, Fein, Stanley and Others

Vacuum & Dust Collector Hoses

Buy on Amazon Find on eBay

9m of length onto your shop vacuum is ideal for cleaning out cars, garages, or workshops

Comes equipped with a 58mm vacuum adaptor to fit all major brands of shop vacuums including Shop-Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, Workshop, Fein, Stanley, Porter-Cable and others

Non-genuine OEM (Original Equipment Manufacturer) quality hose

Crush proof hose is highly flexible and durable with a smooth hose interior for superior airflow

32mm swivel stub tube will work with all 32mm accessory tools, tubes, and attachments

Cen-Tec Systems 92751 6m Contractor Grade Shop Vacuum Hose for Cleaning Cars, Garages and Workshop Dust Collection

Vacuum Hoses

Buy on Amazon Find on eBay

58mm shop vacuum adaptor can be used to connect your shop vacuum to some saws and workshop machinery with 58mm inlets for dust collection

Hose kit includes: 38mm x 6m hose, 2 X 38mm swivel hose cuffs, and 2 X 58mm shop vacuum adaptors

Crush proof hose is highly flexible, durable and has a smooth interior

58mm shop vacuum adaptor is compatible with major brands of shop vacuums such as Ridgid, Festool, Vacmaster, Shop-Vac, and Craftsman

38mm swivel cuff allows you to use 38mm commercial tools and accessories with your shop vacuum. Perfect for commercial and domestic users, whether you're cleaning the workshop, garage, car or just round the house

Industrial Steel Reel with 30 Ft. Hose and Garage Attachment Kit for Wet/Dry Vacuums

Buy on Amazon Find on eBay

Holds a highly flexible crush proof commercial grade vacuum hose with a smooth interior to maximize airflow finished with 360 degree swivel cuffs to permit tools to rotate at the working end of the hose for more comfortable use. A second six foot section of hose connects from the reel to a shop vacuum or commercial vacuum system without restricting free recovery of the hose between uses

Includes a heavy gauge steel hose reel, 30 feet of commercial grade vacuum hose, and a complete set of cleaning accessories for car detailing and general shop clean up. The hose reel allows for compact storage of the vacuum hose and includes a connecting hose suitable for use with home shop vacuum vacuums and professional industrial vacuum systems. The reel is designed for years of reliable service in high demand locations.

Stainless steel reel is made in the USA

Slim-profile, smaller reel, allowing to be more space-efficient in a garage environment

Hose ends easily connect to all major brands of shop vacuum

Read more Read less

Cen-Tec Systems 34828 32mm Universal Dusting Brush with Soft Natural Fill for Numatic (Henry, Hetty, etc.), Hoover, Beam, Electrolux and Others

Electrolux Vacuum Brushes Numatic Vacuum Brushes

Buy on Amazon Find on eBay

Comes with a full, soft, natural fill and is designed for use on delicate finishes and uneven surfaces

This dusting brush will fit most major tank/canister, upright and central vacuums typical of the 32mm (1.25") round connection for domestic vacuums

The gentle cleaning traits of the dusting brush will fit on tubes/wands for tough to reach places and are a must for any accessory kit

The 34828 is black in colour

Compatible with major brands of domestic vacuums such as Numatic homecare range (Henry, Hetty etc.) and also central vacuum brands such as Beam, Electrolux, Vacuflo and others

Cen-Tec Systems 97470 Quick Click Dust Collection Separator, Translucent

Vacuum & Dust Collector Hoses Vacuum & Dust Collector Couplings

Buy on Amazon Find on eBay

8” upper housing with curved surfaces insures the debris entering the separator travels freely past the center baffle and smooths the airstream path which minimizes its impact on the performance of the vacuum and raises efficiency

Designed to efficiently separate dust, debris, and liquids from an airstream and collect the material in a general purpose recovery bin reducing the materials which reach the vacuum

Translucent finish allows operator to see the separation of debris

Product is made in the USA

Ideal for use in a broad range of applications including woodworking, auto body detail shops, commercial painters, sheet rock installation and repair, remodelers, construction clean-up contractors, stone counter top production shops, hard wood floor refinishers, liquid capture, gardening, and slurry collection

Designed around industry standard vacuums and hoses to make connecting the separator easy and efficient with minimal need for adaptors or duct tape. Both the intake and outlet to the vacuum are designed to be compatible with industry standard wet-dry domestic vacuums and their hoses like Rigid, Shop Vac, Vacmaster, Dewalt, and many other brands. The hoses will fit male into the 2.375” inlet. The outside of the inlet and exit to the vacuum are designed to accept popular 2.5” dust collection wire support hoses commonly used in home and commercial workshops

Compatible with all major brands of wet/dry shop vacuums

Compatible with Cen-Tec's Quick Click dust collection accessories

Commercial grade rubber mounting gasket insures against air leaks that can rob performance

Read more Read less

Cen-Tec Systems 39464/35 32-35mm Vacuum Mini Hand Turbine Airo Turbo Brush Compatible with Numatic, Miele, Sebo, Shark, Karcher and More

Vacuum Brushes

Buy on Amazon Find on eBay

Small and light weight, this air driven powerhead is perfect for cleaning pet hair from carpet surfaces such as stairs

Replacement mini hand turbine for 32 and 35mm vacuums including Numatic (Henry), Miele, Sebo, Shark, Karcher and many more

This turbine will fit all major canister vacuums, upright vacuums, and central vacuum brands with 32 or 35mm round tube connections

Lasts longer with a liftable lid which makes cleaning the turbine easy

180mm wide cleaning path makes upholstered surfaces such as sofas and cars a breeze to clean

Cen-Tec Systems 97525 Quick Click Dust Collection Separator for Workshop Vacuum Systems with 5m Power Tool Hose and 2.5m Vacuum Connection Hose

Vacuum & Dust Collector Hoses

Buy on Amazon Find on eBay

20cm (8inch) upper housing with curved surfaces insures the debris entering the separator travels freely past the centre baffle and smooths the airstream path which minimises its impact on the performance of the vacuum and raises efficiency

Designed to efficiently separate dust, debris, and liquids from an airstream and collect the material in a general purpose recovery bin reducing the materials which reach the vacuum

Includes 2.5m x 38mm vacuum connection hose compatible with industry standard wet-dry domestic vacuums like Bosch, Festool, Makita, Shop-Vac, Vacmaster, Titan, DeWalt, and many other brands which are use 58 or 63mm connections and 63mm wire support hose

Comes with the Quick Click 5m hose tool adaptors which are compatible with various tools from major brands including Bosch, Ryobi, Makita, Dewalt, Festool, Fein, Cobalt, Porter Cable, Hitachi, Milwaukee Electric and many more. Adaptor set internal diameters: 19, 25, 32 and 38mm. Adaptor Set outer diameters: 32, 35, 42, 48, 58mm

Read more Read less

Cen-Tec Systems 95281 Quick Click 6m Hose for Home and Shop Vacuums with Power Tool Adaptor Set for Dust Collection and Clean-up Tools

Vacuum & Dust Collector Hoses

Buy on Amazon Find on eBay

6m Hose kit includes clean-up tools for your workshop and also comes with a mesh caddy bag for easy storage of vacuum tool

Four piece power tool adaptor set designed to fit most major brands of power tools and work shrouds with ports between 19-48mm (0.75-1.89″) including Bosch, Ryobi, Makita, DeWalt, Festool, Einhell, Triton, Hitachi, Milwaukee Electric and many more

To change from the standard vacuum attachments into the power tool dust collection adapters, simply thread off the swivel adapter and thread on the Quick Click thread and clip ring, which then snaps into the corresponding bayonet

The tank end is designed to fit all major brands of home shop vacuums including Shop-Vac, Vacmaster, Festool, Bosch, Titan, Mirka, Ridgid, Craftsman, DeWalt, John Deere, as well as many private brands typical of the 58mm vacuum connection

Clean-up tools consist of two polypropylene tubes, curved handle with AFR, 305mm (12") hard floor tool, dusting brush, crevice tool and slide-on upholstery tool

Read more Read less

Cen-Tec Systems 34839 Premium 32mm Dusting Brush with Soft Natural Fill for Numatic (Henry, Hetty, etc.), Hoover, Beam, Electrolux and Others

Vacuum Brushes

Buy on Amazon Find on eBay

Comes with a full, soft, natural fill and is designed for use on delicate finishes and uneven surfaces

This dusting brush will fit most major tank/canister, upright and central vacuums typical of the 32mm (1.25") round connection for domestic vacuums

The gentle cleaning traits of the dusting brush will fit on tubes/wands for tough to reach places and are a must for any accessory kit

The 34839 is black in colour

Compatible with major brands of domestic vacuums such as Numatic homecare range (Henry, Hetty etc.) and also central vacuum brands such as Beam, Electrolux, Vacuflo and others

Cen-Tec Systems 94203/NUM/BLA 9 Metre Hose for 32mm Numatic Vacuums (Henry, Hetty, Harry, Charles etc.) with Power Tool Adaptor for Dust Extraction (25mm, 35mm, 38mm, 48mm) - Black

Vacuum & Dust Collector Hoses Vacuum & Dust Collector Couplings

Buy on Amazon Find on eBay

The tank end is designed to fit 32mm Numatic Vacuums which is inclusive of Henry, Hetty, Harry and Charles, all apart of Numatic's homecare range. Please check your vacuum before purchasing this hose set

Hose and Power tool adaptor Kit contains 1 x 9m crushproof hose (32mm diameter), 2 x bayonets; 2 x air relief; 25-35mm adaptor; 38-48mm adaptor; 32mm threaded hose connector; adaptor clip ring, 32mm Numatic vacuum tank fitting. This is a specifically engineered solution compatible with major brands of power tool manufacturers such as Makita, Dewalt, Festool. Fein, Kobalt, Porter Cable, Hitachi, Einhell, MacAllister, Milwaukee Electric and many more

The soft molded TPE fitting measures 25mm on the inner diameter and has four concentric rings to hold firmly to the power tool. For power tools with a female connection the 25mm soft TPE part measures 35mm on the outer diameter. The soft rubber like feel and taper of the fitting insures a positive tool forming fit

Includes a second bayonet with a soft molded TPE fitting that measures 38mm on the inner diameter with three concentric rings to hold firmly to the power tool even when carrying a substantial flow of debris in the air stream. The fitting measure 48mm on the outer diameter. The soft TPE allows the fitting to form to the shape of the exhaust port off of the selected power tool

Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, a bayonet fitting with a 25mm soft TPE fitting, and a second bayonet with a soft 38mm TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection

Read more Read less

Centec Systems Vacuum Extension Hose, Grey, 30'

Vacuum Hoses

Buy on Amazon Find on eBay

30 Full feet of length onto your shop vacuum is ideal for cleaning out cars, garages, or home shops

Comes equipped with a 2.125 inch to 2.25 inch vacuum adapter to fit all major brands of shop vacuums

Smooth hose interior for superior airflow

Crushproof hose is highly flexible and durable

1.25 inch swivel stub tube will work with all 1.25 inch accessory tools, wands, and attachments

Cen-Tec Systems FAQs

How much do Cen-Tec Systems products cost?

Cen-Tec Systems 94247 Quick Click Two Piece Power... is the top 1 product we recommend in the Cen-Tec Systems buying guide, which is priced at £16.95, you can view it on Amazon page.
Cen-Tec Systems Quick Click Hose for Home and Shop... is one of the popular products we recommend in the Cen-Tec Systems buying guide, which is priced at £44.95, you can view it on Amazon page.
Cen-Tec Systems 34828 32mm Universal Dusting Brush... is the cheapest product in the Cen-Tec Systems picks list, which is priced at £8.65, you can view it on Amazon page.
Industrial Steel Reel with 30 Ft. Hose and Garage... is the most expensive product in the Cen-Tec Systems picks list, which is priced at £486.67, you can view it on Amazon page.

Where can you buy Cen-Tec Systems products?

You can purchase Cen-Tec Systems products from the seller Malton Plastics (UK) Limited, over the last 12 months, the seller has received honest feedback from 293 consumers, and the average rating is 4.83. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of Cen-Tec Systems?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Cen-Tec Systems is worth your consideration.

Who are the manufacturers of the Cen-Tec Systems products?

Most of the Cen-Tec Systems products are produced by Malton Plastics (UK) Ltd. and Malton Plastics (UK) Limited. The manufacturer provides Cen-Tec Systems with a steady supply of products, and they have a good cooperative relationship with each other.

Similar Brands