Skip to content
Drill America feature image

Drill America

4.3
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Drill America range from £2.69 to £141.24, and the average price of all the products is about £34.8. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Drill America offers a variety of products, there are 306 products available, 19 of which were analyzed in detail and recommended to customers. If you find yourself hesitating about a purchase, check out our thorough Drill America review to see what the best picks are.

Share

Drill America Best Sellers

Last Updated: 15 Jun 2023

Reamer Bits

Drill America - DWRRDP.1240 .1240 High Speed Steel Dowel Pin Reamer, DWR Series

Drill America - DWRRDP.1240 .1240 High Speed Steel Dowel Pin Reamer, DWR Series Cover
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
Buy on Amazon Find on eBay
Extra Long Drill Bits for Steel Extra Long Drill Bits

Drill America - DWDDL12X1/8 1/8" x 12" High Speed Steel Extra Long Drill Bit, DWDDL Series

Drill America - DWDDL12X1/8 1/8" x 12" High Speed Steel Extra Long Drill Bit, DWDDL Series Cover
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Buy on Amazon Find on eBay
Taps & Dies

Drill America 3/4"-11-1/2 2"OD High Speed Steel NGH Garden Hose Round Die, DWT Series DWTNGH3/4DIE

Drill America 3/4"-11-1/2 2"OD High Speed Steel NGH Garden Hose Round Die, DWT Series DWTNGH3/4DIE Cover
  • 2" Outside Diameter
  • 3/4"-11-1/2 2"NGH Garden Hose Size
  • Right hand thread
Buy on Amazon Find on eBay
Steel Drill Bit Sets Plastic Drill Bit Sets

Drill America POU Series 1/4" NPT Tap and Drill Set, 1/4" Carbon Steel NPT Tap and 7/16" HSS Drill Bit in Plastic Case

Drill America POU Series 1/4" NPT Tap and Drill Set, 1/4" Carbon Steel NPT Tap and 7/16" HSS Drill Bit in Plastic Case Cover
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads
  • Set contains matching NPT pipe tap and high speed steel drill bit
Buy on Amazon Find on eBay
Taps & Dies

Drill America POUCSNPT5 5 Piece Carbon Steel NPT Pipe Tap Set, 1/8", 1/4", 3/8", 1/2" and 3/4"

Drill America POUCSNPT5 5 Piece Carbon Steel NPT Pipe Tap Set, 1/8", 1/4", 3/8", 1/2" and 3/4" Cover
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
Buy on Amazon Find on eBay
Drill Bit Sets

Drill America POU Series #0-80 Tap and Drill Set, 0-80 HSS Plug Tap and 3/64" HSS Drill Bit in Plastic Case

Drill America POU Series #0-80 Tap and Drill Set, 0-80 HSS Plug Tap and 3/64" HSS Drill Bit in Plastic Case Cover
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping
  • Set contains high speed steel plug hand tap and matching high speed steel drill bit
  • Set comes in plastic pouch
Buy on Amazon Find on eBay
Cobalt Jobber Drill Bits Jobber Drill Bits

Drill America - D/AMMCO14.00 14.00mm Cobalt Metric Drill Bit with 1/2" Shank, D/AMMCO Series

Drill America - D/AMMCO14.00 14.00mm Cobalt Metric Drill Bit with 1/2" Shank, D/AMMCO Series Cover
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Buy on Amazon Find on eBay
Drill Bit Sets

Drill America - DWD29J-CO-PC 29 Piece M35 Cobalt Drill Bit Set in Round Case (1/16" - 1/2" X 64ths), DWDCO Series

Drill America - DWD29J-CO-PC 29 Piece M35 Cobalt Drill Bit Set in Round Case (1/16" - 1/2" X 64ths), DWDCO Series Cover
  • Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials
  • Set of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
Buy on Amazon Find on eBay
Taps & Dies

Drill America - DWTMHX16X1.5 m16 X 1.5 Carbon Steel Hex Rethreading Die, DWT Series

Drill America - DWTMHX16X1.5 m16 X 1.5 Carbon Steel Hex Rethreading Die, DWT Series Cover
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Made of carbon steel
  • No special holder is required for this type of die, any wrench large enough will suffice
Buy on Amazon Find on eBay
Taps & Dies

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wooden Case

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wooden Case Cover
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
Buy on Amazon Find on eBay
Router Cutter Bits Router Guide Bushes

Drill America DMS70-3080 Carbon Steel Self Feed Bit, Polished Finish, Spiral Flute, 4-5/8" Size (Pack of 1)

Drill America DMS70-3080 Carbon Steel Self Feed Bit, Polished Finish, Spiral Flute, 4-5/8" Size (Pack of 1) Cover
  • Comes with polished finish
  • Made of carbon steel
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Buy on Amazon Find on eBay
Reamer Bits

Drill America - DWRBJR7/16 7/16" to 1" Ball Joint Taper Reamer, DWR Series

Drill America - DWRBJR7/16 7/16" to 1" Ball Joint Taper Reamer, DWR Series Cover
  • Commonly used in ball joint studs and tie-rod ends
  • For use in enlarging or deburring tapered holes
  • Use in a machine with a 1/2 in. chuck, simply remove the T-handle
Buy on Amazon Find on eBay
Taps & Dies

Drill America 3/8"-20 High Speed Steel British Standard Fine Plug Tap, DWT Series

Drill America 3/8"-20 High Speed Steel British Standard Fine Plug Tap, DWT Series Cover
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Buy on Amazon Find on eBay
Taps & Dies

Drill America 1-3/16"-12 X 2-1/2" OD High Speed Steel Round Adjustable Die, DWT Series

Drill America 1-3/16"-12 X 2-1/2" OD High Speed Steel Round Adjustable Die, DWT Series Cover
  • Bright finish
  • Round die
  • For use in making new threads or re-threading existing threads
Buy on Amazon Find on eBay

Drill America FAQs