ENT European Norm Tools

4.9

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the ENT European Norm Tools range from £11.8 to £120.5, and the average price of all the products is about £40.8. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

ENT European Norm Tools offers a variety of products, there are 306 products available, 19 of which were analyzed in detail and recommended to customers. The ENT European Norm Tools review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

ENT European Norm Tools Best Sellers

Last Updated: 15 Jun 2023

ENT 25020 Forstner Drill CS Shank (S) 8 mm, Diameter (D) 8 mm, L 90 mm

Forstner Drill Bits Drill Bits

Buy on Amazon Find on eBay

Diameter (D) 8 mm

Shank (S) 8 mm

Traditional Forstner bit made from high grade carbon steel with centre point and two wings. They can drill overlapping holes in any direction in mainly soft timber. Can be used freehand or in a pillar drill.

Length (L) 90 mm

Carbon Steel (CS)

ENT 50085 HSS-G Premium Wood Drill with Ø 8.5 mm, Spiral Drill Working Lenght 73 mm and Total Length 118 mm with Centering Tip and Shoulder Cutter

Wood Drill Bit Sets Drill Bit Sets

Buy on Amazon Find on eBay

Spiral - The precision-ground spiral with its smooth surface ensures optimum concentricity when drilling and clean chip ejection.

Centre point and pre-cutter - The centre point guarantees precise drilling without the drill running out of true. The pre-cutters enable precise and circular drilling and a clean hole edge quality.

Steel quality - The hardened HS steel according to EN ISO 4957 with a hardness of at least 62 HRC has a high wear resistance as well as a high heat resistance.

Content: ENT HSS-G Premium wood drill with diameter 8,5 mm, working length 73 mm, total length 118 mm, with centering tip and shoulder cutter

Concentricity - The ground production results in improved concentricity compared to flat-rolled wood drills, as no bending occurs during production.

Read more Read less

ENT 6-Piece Hard Metal Router Grooving Bit Set with Hard Metal Blade Diameter 8/10/12/16/18/20 mm Shaft Diameter 8 mm Length 90 mm

Router Cutter Bits Router Guide Bushes

Buy on Amazon Find on eBay

Router body with non-stick coating for better blade ejection and reduced friction

All bits double-edged with hard metal blade (Z2+1)

Precisely ground shafts for optimal rotation

Long service life

ENT 41044 Auger Bit CS Diameter (D) 17 mm, NL 165 mm, GL 235 mm, S 12 mm Hex Shank

Auger Drill Bits Hex Drill Bits

Buy on Amazon Find on eBay

Total length (GL) 235 mm / Shank (S) 12 mm Hex Shank

Diameter (D) 17 mm / Cutting Length (NL) 165 mm

Technical details: With screw point and scriber. Wrench size is 11 mm at all 12 mm hex bit shanks.

Auger bits to bore through rafters and uprights, also used in ship and fence construction. The spur produces clean bore edges, the scriber pulls the bit exactly into the wood. Auger bits suitable for softwood and european hardwood (e.g. beech and oak). Not suitable for extremely hard wood such as exotic wood.

Advantages: Scriber for skip free cutting edge with automatic feed, modular system: drilling and countersinking (with additional countersink)

ENT 11355 Straight Router bit, Diameter (D) 8 mm, NL 50 mm, GL 90 mm for Festool Domino DF700 with M8 x 1 mm mounting, in Carbide

Router Cutter Bits Router Guide Bushes

Buy on Amazon Find on eBay

The Spiral grooved shape of the cutter body offers longer life and reduces the effort and energy required by the operator and machine, while the shape ensures easy chip ejection.

Straight router bit especially for Festool DOMINO DF700 dowel routers. The face of the Milling cutter is made of Solid carbide and guarantees problem-free drilling into hardwood and softwood. The Milling cutters have a threaded holder for the connection system of the DF 700 dowel routers.

double-edged, Right-rotating, Carbide Tungsten

Material: Softwood, hardwood, coated boards - Machine: Festool DOMINO DF700

Diameter (D) 8 mm, Usable length (NL) 50 mm, Total length (GL) 90 mm, Shank (S) M8 x 1 mm internal thread

ENT 50406 Wood Twist Drill Ø 6 mm, Extra Long 150mm, HSS-G, with Centre Point and pre-Cutter, D6 x NL100 x GL150mm, Shank Cylindrical

Drill Bits for Wood HSS Drill Bits

Buy on Amazon Find on eBay

The special cutting geometry ensures a clean cut through the wood fibres before drilling. The centre point guarantees a precise drilling without "running" of the drill. The result: good chip ejection, circular, dimensionally accurate drill holes and a clean hole edge quality.

This ENT drill is particularly suitable for assembly work due to its long effective length and overall length and enables thick beams and rafters to be drilled through. Due to the production with ground spiral and cylindrical shank the ENT wood twist drill convinces with its high-quality finish.

The drill is suitable for drilling holes in hardwood and softwood, in glued woods and coated boards, as well as in MDF and acrylic glass. Optimum results are achieved with a hand drill, floor standing drill or bench drill.

Included in the scope of delivery: One ENT wood twist drill HSS-G (HSS ground) in the long version. Technical data: Diameter 6 mm, effective length 100 mm, total length 150 mm, clockwise rotation. The delivery is protected in a plastic sleeve.

Read more Read less

ENT 40246 Forstner Drill Premium Quality Forged Diameter (D) 46 mm, NL 60 mm, GL 90 mm, S 10 mm

Drill Bits Forstner Bits

Buy on Amazon Find on eBay

Total length (GL) 90 mm / Shank (S) 10 mm

Diameter (D) 46 mm / Cutting Length (NL) 60 mm / Shaft length (SL) 30 mm

The wavy peripheral cutting edge prevents the edges from wearing out. Easy and effortless cutting due to ideal cutting geometries.

Technical details: DIN 7483G, with a small center point, 2 peripheral cutting edges, 2 lifters and reduced cylindrical shank.

Forstner bit in premium quality for drilling splinter-free, true to size blind holes, for edge drillings and slant drillings in softwood and hardwood.

ENT 25507 Slot Mortise Bit CS Shank (C) 13 mm, Diameter (D) 12 mm, D 50 mm, GL 150 mm, Left

Router Cutter Bits Router Guide Bushes

Buy on Amazon Find on eBay

Diameter (D) 12 mm, left

Shank (C) 13 mm, Shank length (D) 50 mm

Total length (GL) 150 mm

Slot mortise bit with two wing cutter with chip breakers for cutting tear free longitudinal slots. Cylindrical shank. Made of carbon steel (CS).

Carbon Steel (CS)

ENT 26518 5-Piece Countersink Drill Bit Set HSS, Diameters (d) 2,5-4 and 4,5 mm, e 90°, Right Hand

Drill Bit Sets

Buy on Amazon Find on eBay

The rotation of the countersink bit on the drill creates a depth stop which allows the drilling depth to be maintained precisely. For efficient drilling and countersinking in one operation.

Height-adjustable countersink drill bits for wood with long service life thanks to ENT quality for universal mounting on a machine wood drill.

Technical specifications: Inner diameter (d): 2.5 - 4 and 4.5 mm - Outer diameter (D): 12 mm (Ø 2.5 - 3 mm) / 16 mm (Ø 4 - 4.5 mm) - Angle (E): 90° - Clockwise - Supplied in a plastic tube.

Quality: HSS - high-speed steel ground counter sink wood drill bits - suitable for hardwood, softwood, coated boards, plastic - machine type: hand drill, drill press.

Also compatible with ENT 09225 25-pieces and ENT 09248 8-pieces HSS drill sets and the HSS single drills. The counter sinker drill bits can also be used universally. The countersink bits can be adjusted with the 1.3 mm hexagonal key included in the set.

Read more Read less

ENT 12364 Cove Cutter, Shank (S) 12 mm, Radius (R) 5 mm, D 10 mm, NL 9.5 mm, SL 40 mm, Carbide Tungsten, Woodworking, Router

Router Cutter Bits Router Guide Bushes

Buy on Amazon Find on eBay

Material: softwood, hardwood - Machine: hand router, table router, CNC router

Fillet cutter with two carbide cutting edges, drill-cutting and peripheral cutting. A continuous carbide cutting edge guarantees perfect rounding of the groove. For routing round grooves and coving. Suitable for upgrading profile mouldings, picture frames and pieces of furniture.

Shank (S) 12 mm, Shank length (SL) 40 mm

Radius (R) 5 mm, Diameter (D) 10 mm, Cutting width (NL) 9,5 mm

Cutting (Z) 2, Carbide Tungsten (CT)

ENT 26515 5-Piece HSS-G Drill Countersink Set 4 5 6 8 10 mm - Ground HSS Wood Drill bit - in Plastic case

Plastic Drill Bit Sets Drill Bit Sets

Buy on Amazon Find on eBay

HSS-G quality - the drills and also the countersinks themselves are manufactured in the top HSS-G quality. Precise drilling in hard and soft wood, as well as in many other types of wood such as MDF possible. ENT drills also achieve very good and precise results with glued and coated boards.

The ENT drill countersink set contains 5 drills with height-adjustable countersink core and matching hexagon key. By turning the countersink on the drill bit, a depth stop is created which enables the exact drilling depth to be maintained.

Transition from spiral to shank - The smooth and stepless transition from spiral to shank contributes to a good chip ejection.

Contents of the set: HSS-G drills with diameters of 4, 5, 6, 8 and 10 mm, five matching HSS-G countersinks for 4, 5, 6, 8 and 10 mm wood drills and 1.3 mm Allen key. The set is delivered in a high-quality plastic box.

Centring point and high concentricity accuracy - The ground production results in an improved concentricity accuracy compared to flat rolled wood drills, as no bending occurs during production.

Read more Read less

ENT 09225 25-Piece HSS Wood Drill Bit Set - 1-13 mm - in 0.5mm Increments | Wood Drill Bits

Drill Bit Sets

Buy on Amazon Find on eBay

Spiral - The high-precision spiral of the drill bits for wood with its smooth surface ensures optimum concentricity during drilling and clean chip ejection. Steel quality - The hardened HS steel according to EN ISO 4957 with a hardness of at least 62 HRC has a high wear resistance as well as a high heat resistance.

Centre point and spurs - The centre point guarantees precise drilling without the wood drill bits running out of alignment. The spurs enable precise and circular drilling and a clean hole edge quality.

Shank marking - The stamped measurement marking ensures good readability of the Ø even after repeated use of the wood drill bit sets.

Shank - The drill bits wood have shanks ranging from from 1 - 10 mm. Drills from 10.5 mm diameter have a stepped 10 mm shank, so you can use any drill bit on a hand drill or cordless drill.

Concentricity - The machined fabrication of the drill bit sets wood results in improved concentricity compared to flat-rolled wood drills, as no bending occurs during fabrication.

Read more Read less

ENT 09012PLUS 12-Piece Carbide Router Bit Plus Set in Break-Proof Plastic Case - Router Bit with Shank 8 mm - Straight Router Bit with Standard Tungsten Carbide Cutting Tip for Drilling into Grooves

Router Cutter Bits Router Guide Bushes

Buy on Amazon Find on eBay

Special features - The PLUS edition offers you four straight router bits (Ø 8mm, 12mm, 16mm, 20mm), each with a carbide basic tip (Z2+1) and a depth scale up to 20mm, for drilling and plunging into softwood and hardwood. The golden anti-stick coating ensures better chip ejection, reduces the effort required as well as reducing resin and glue build-up.

This ENT router bit set offers you a selection of 12 different router bits from seven different router bit categories. The multi-purpose wood router bit set is very popular with DIY enthusiasts and craftsmen, as a worktop router bit set as well as on installations, thanks to its proven durability.

ENT quality - Each router bit has a fine-grained carbide cutting edge, a long service life and is durable and wear-resistant. Router bits with high-quality ball bearings glide along your workpiece to create clean and smooth surfaces on furniture such as tables, shelves and window frames. Some router bits have an axle angle for a tear-free cut.

Delivery includes - 4x straight router bits (Ø 8mm, 12mm, 16mm, 20mm) with TC drilling tip Z2+1, usable length 20 mm / 1x flush trim router bit with 12.7 mm, usable length 25.4 mm / 2x roundover router bit, radius 6 and 10 / 1x chamfer bit Ø 12mm, radius 6 / 1x chamfer router bit, radius 6 / 1x v groove router bit angle 90° / 1x edge forming router bit radius 4 / 1x chamfer router bit with 45° / 1x hex key

Compatibility - The 8 mm shank diameter fits all hand routers, bench routers and CNC machines of all power tool brands with 8 mm collet. The precisely ground shank ensures an optimum hold in your machine and enables high concentricity. Important useful data such as minimum clamping depth and maximum speed can be found on the respective shank.

Read more Read less

ENT 45945 Depth Stop - Drill Stop Made of Aluminium, for Wood Drill Ø 6-11 mm, Made of Black Coated Aluminium

Screwdriver Depth Stops

Buy on Amazon Find on eBay

This depth stop fits all ENT brand wood twist drills.

The innovative depth stop BohrStopp can be used on wood twist drills with different diameters thanks to its flexible collet. It is mounted completely without screws, so that the drill spiral is not affected compared to conventional depth stops. Thanks to its screwable metal housing, the drill stop is quickly ready for use and easy to clean.

Suitable for wood twist drills with 6 - 11 mm diameter.

Diameter (D): 27 mm, Inner Diameter (d): 6 - 11 mm, Length (L): 46 - 54 mm, Material: Aluminium, black lacquered

Assembly: Slide the collet (plastic element) over the shaft onto the spiral and then screw the two aluminium parts together.

ENT 45262 Slot Mortise Bit Twisted Version Left-Hand Rotation CS Diameter (D) 10 mm, NL 45 mm, GL 140 mm, Left, S 16 mm

Drill Bits Brad-point Bits

Buy on Amazon Find on eBay

Total length (GL) 140 mm / Shank (S) 16 mm

Diameter (D) 10 mm / Cutting Length (NL) 45 mm / Rotation: left

Mortise bit, twisted version. DIN 6442 A, double cutters, with chip-breaking grooves, for right- or left-hand cutting. Cylindrical shank for use in bushings. The long-hole drill cuts the clamping grooves in the fully ardened material. This ensures a clean working surface and a longer service life of the tool.

For use in long-hole drilling machines, for drilling and milling of slots. Especially steady cutting. Suitable for softwood and hardwood. Speed: 3000–5000 rev/min.

ENT 10363 Straight Cutter TC Shank (S) 8 mm, Diameter (D) 6 mm, NL 25 mm, SL 32 mm, GL 61 mm

Router Cutter Bits Router Guide Bushes

Buy on Amazon Find on eBay

Diameter (D) 6 mm, Cutting width (NL) 25 mm

Shank (S) 8 mm, Shank length (SL) 32 mm

Total length (GL) 61 mm

Straight cutter with two flutes for grooving, rebating and mortising. For a clean finish when working in abrasive materials such as chipboard, MDF and plywood.

Flutes (Z) 2, Tungsten Carbide (TC)

ENT 14280 Rounding Over Cutter TC Shank (S) 8 mm, Diameter (D) 16,7 mm, NL 9,5 mm, R 2 mm, SL 32 mm, with Ball Bearing

Router Cutter Bits Router Guide Bushes

Buy on Amazon Find on eBay

Diameter (D) 16,7 mm, Cutting width (NL) 9,5 mm

Shank (S) 8 mm, Shank length (SL) 32 mm

Two flute rounding over cutter with an exchangeable bearing with Ø 12,7 mm. For precise and clean rounded edges.

Radius (R) 2 mm, with Ball Bearing

Flutes (Z) 2, Tungsten Carbide (TC)

ENT 13964 Slotting Cutter TC Shank (C) 8 mm, Diameter (A) 40 mm, B 6 mm, GL 50 mm, on Arbor Mounted

Router Cutter Bits Router Guide Bushes

Buy on Amazon Find on eBay

Diameter (A) 40 mm, Cutting width (B) 6 mm, Total length (GL) 50 mm

Shank (C) 8 mm

Two wing slotting cutter mounted on arbor. Diameter: 40 mm, round form. Sunked screw allows kerfs on flat surface. Maximum cutting depth: 12 mm.

Slotting Cutter on Arbor mounted

Flutes (Z) 2, Tungsten Carbide (TC)

ENT 12282 Cove Cutter, Shank (S) 8 mm, Radius (R) 4 mm, Diameter (D) 8 mm, NL 8 mm, SL 32 mm, Carbide Tungsten, Woodworking, Router

Router Cutter Bits Router Guide Bushes

Buy on Amazon Find on eBay

Material: softwood, hardwood - Machine: hand router, table router, CNC router

Shank (S) 8 mm, Shank Length (SL) 32 mm

Radius (R) 4 mm, Diameter (D) 8 mm, effective length (NL) 8 mm

Cutting (Z) 2, Carbide Tungsten (CT)

ENT European Norm Tools FAQs

How much do ENT European Norm Tools products cost?

ENT 25020 Forstner Drill CS Shank (S) 8 mm, Diamet... is the top 1 product we recommend in the ENT European Norm Tools buying guide, which is priced at £11.8, you can view it on Amazon page.
ENT 50085 HSS-G Premium Wood Drill with Ø 8.5 mm,... is one of the popular products we recommend in the ENT European Norm Tools buying guide, which is priced at £17, you can view it on Amazon page.
ENT 25020 Forstner Drill CS Shank (S) 8 mm, Diamet... is the cheapest product in the ENT European Norm Tools picks list, which is priced at £11.8, you can view it on Amazon page.
ENT 6-Piece Hard Metal Router Grooving Bit Set wit... is the most expensive product in the ENT European Norm Tools picks list, which is priced at £120.5, you can view it on Amazon page.

Where can you buy ENT European Norm Tools products?

You can purchase ENT European Norm Tools products from the seller INTECRO, over the last 12 months, the seller has received honest feedback from 239 consumers, and the average rating is 4.9. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of ENT European Norm Tools?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and ENT European Norm Tools is worth your consideration.

Who are the manufacturers of the ENT European Norm Tools products?

Most of the ENT European Norm Tools products are produced by ENT. The manufacturer provides ENT European Norm Tools with a steady supply of products, and they have a good cooperative relationship with each other.

Similar Brands