FLUKE Networks feature image

FLUKE Networks

Review rating Review rating Review rating Review rating Review rating 4.8

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the FLUKE Networks range from £29.99 to £2532, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. On average, the FLUKE Networks products cost around £407.43. It is not a small expenditure for most consumers, so we recommend that you consider all aspects before making the purchasing decisions.

FLUKE Networks offers a variety of products, there are 306 products available, 8 of which were analyzed in detail and recommended to customers. The FLUKE Networks review aims to sharpen your understanding of the brand and introduces you to their bestselling products. Just keep reading!

FLUKE Networks Best Sellers

Last Updated: 15 Jun 2023

Fluke Industrial FLK2AC/90-1000V ACV Detector

Upon detection, tip glows and beeper sounds
Voltbeat technology and continuous self test so you always know it is working
Voltbeat technology and continuous self test so you always know its working
Voltage detection from 90 to 1000 V ac.NEW! Innovative ‘Battery Check' button function.NEW! Always on, using special low power circuitry.Integrated clip design, optimized for pocket storage.Category IV – 1000 V overvoltage rated product
20 volt to 90 volt AC control circuit model also available

Fluke TL175 TwistGuard™ Test Leads, Test Probes

TOUGH, RELIABLE - WearGuard indicator shows damage to leads - Heavy duty strain relief withstands over 30,000 bends
COMPATIBLE WITH ALL FLUKE MULTIMETERS - Can Be Used With The Full Range Of Fluke Multimeters, Including 289, 287, 233, 87, 83, 179, 177, 175, 117, 116, 115, 114, 113, 27, 28, 77, 88, 789, 787, 1587 & 1577
WARRANTY - One year Fluke Warranty.
RATINGS - CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
COOL UNDER PRESSURE - TL175 test leads withstand high temperatures and remain flexible in cold temperatures.

Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit

Includes Pro3000 Tone Generator, Tone Probe, 9V alkaline battery & nylon pouch
Tone and trace wire on non-active networks, SmartTone technology provides five distinct tones for exact pair identification
Sends a loud tone up to 16 km (10 miles) in most cables and provides five distinct cadences for isolating individual wire pairs
Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
Angled bed-of-nails clips allow easy access to individual pairs and RJ-11 easily connect to telephone jacks---no need for adapters

Fluke Networks MT-8200-60-KIT IntelliTone 200 LAN Toner and Probe Kit

MT-8200-60-KIT includes: IntelliTemp 200 LAN toner and 200 probe, Coax F connector adapter, (2) RJ11 and (2) RJ45 patch cables, test leads with alligator clips, (2) lanyards, quick Start Guide, and (2) 9-volt batteries
IntelliTemp digital toning technology ends cable location confusion, decisively rejects noise and false Signals, locates Cables on Active networks, even when terminated at a switch
Smart tone analogue toning technology isolates individual wire pairs precisely by changing tone when shorted, effectively traces and locates voice, audio, and video cabling
IntelliTemp digital toning technology isolates cable and wiring within a bundle, despite cable bleed, confirms cable location, verifies continuity, and detects faults (opens, shorts, and reversed pairs) in one step

Fluke Networks MS2-WM Wiremap Adapter for Microscanner2 Network Cable Tester

For use with MicroScanner2 cable verifier to detect all types of wiremap faults
Doubles as a protective cap for the cable verifier
With F-Connector and 8-Pin Modular Jack
Country of Origin: China

FLUKE networks FIBERLERT-125 FiberLert Live Fiber Detector, Blue, 5317262

No setup or interpretation needed – light and sound indicate presence of optical signal
Detects optical power in single-mode and multimode fiber wavelengths (near infrared range 850 to 1625 nm)
“Non-contact” detector lessens the risk of damage to fiber optics; suitable for ports and patch cords, SM, MM, UPC and APC connections
Two-year warranty
LightBeat flashes to indicate operation and battery status; powers off after five minutes to preserve battery (2xAAA, included)

FLUKE networks LinkIQ Cable+Network Tester, LIQ-100

Network features including: Nearest Switch Diagnostics including advertised data rate, switch name and port number, and VLAN
Cable Performance testing up to 10GBASE-T via frequency-based measurements
PoE Verification – Detects the PoE class (1-8) and power & performs a load test of available PoE from the connected switch
Displays cable length, wire map, and distance to open or short

Fluke Industrial TP88 Rigid Back Probe Pin Set

Tested to 60 V DC
Slides onto test probes measuring 2 mm (0.08 inches)

FLUKE Networks FAQs

You can purchase FLUKE Networks products from the seller Testermans CO UK, over the last 12 months, the seller has received honest feedback from 61 consumers, and the average rating is 4.75. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and FLUKE Networks is worth your consideration.

Most of the FLUKE Networks products are produced by Fluke Industrial and Fluke. The manufacturer provides FLUKE Networks with a steady supply of products, and they have a good cooperative relationship with each other.