Skip to content
Toolco feature image

Toolco

4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Toolco range from £9.71 to £64.41, and the average price of all the products is about £32.37. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Toolco has a relatively small number of products for sale, only 38. We analyzed some of them in detail and recommended them to our readers. This Toolco review will give you insight into the products they offer so you can make a better informed decision before you make your purchase.

Share

Toolco Best Sellers

Last Updated: 15 Jun 2023

20pcs Metal Candle Wick Centering Device, Stainless Steel Candle Core Holder for Candle DIY Making (Candle Clips, Wick Centering Device, Silver)

  • Durable & Bow Tie Clip Design - Metal candle wick holders are made of high quality stainless steel, strong, durable, designed for long-term use; Bow tie clip allows you to keep wick centered, will make your homemade candle process much easier.
  • Product Includes & Size - Candle Wick Centering Device Specification: 20pcs stainless steel candle core holder set, Size:3.93x0.98inch, Length:10cm/ 3.93inch, Width:2.5cm/0.98inch, Net Weight:15g*20pcs, Suitable for most candle containers.
  • Widely Used Applied - A must have for homemade candles, Generic size metal three - hole candle wick centering device, Will fit most candle containers. Pack of 20 value pack, a great gift to all candle making lovers, widely applied in your DIY programs.

28Pcs Upgraded DC Power Adapter Connector, 14 Pairs 12V Male+Female 2.1 X 5.5MM DC Power Jack Plug Connector for CCTV Camera, Led Strip Light Cable Wire

  • 14 Pair (14Pcs Male+14 Pcs Female) DC Power Plug Connector Adaptor Can Handle 16-24AWG Gauge Wire barrel jack adapter dc 12v plug; Premium Quality: Double Layer(Injection Moulding) Provide Best Polarity Connection and Insulation DC Electrical Connector connect wire lead end to a DC 2.1x5.5mm port.
  • Easy to Install: Tight Screw on Terminal, No-Soldering/Crimping Needed, Stripped about 1/2" of wire end, and inserted firmly, then screwed down completely, just be sure to have a small fillips screw-driver handy.
  • Safety and Stability: Maximum 5A Current 1V-36V No Heat, Heavy Duty Inner Wire leads and Connecting Portion, Simply & Professional, Internal diameter 2.1mm, External diameter 5.5mm, 12volt 12vdc barrel adapters jacks will provide a great connection for CCTV Camera ETC.

Fiber Visual Fault Locator 30mW With FC/LC Adapter Kit, VFL 30KM Include Single Mode 9/125um FC Male to LC Female Connector, Red Light Pen for CATV Telecommunications Engineering Maintenance

  • The VFL + FC/LC connector kit includes an FC interface to LC interface adapters. 2.5mm universal connector - Detector connectors are compatible with round and square ST, SC, MU, FC, and LC interference of different optical cables.
  • Visual fault locator can easily and accurately detect all kinds of optical fiber faults, such as fracture, bad connection, bending, opening, etc. The detector emits a 650nm red light for optical fiber tracking. Optical fiber rupture or fault will refract light and produce a bright glow around the fault area. So you can easily find and fix bugs.
  • We have more than 10 years of professional production experience and can provide service response within 24 hours. We are committed to providing every customer with the best products and services, if you need help, please feel free to contact us.

Visual Fault Locator 30KM Fiber Optic Cable Tester Meter Red Light VFL with 2.5mm Universal Connector for FC/SC/ST Adapter Pen for CATV Telecommunications Engineering Maintenance

  • [Accurate Identification] Easily and accurately detect locate fiber breaks,poor connections,bending or crackingVisual Fault Locator will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area.
  • [Practical Design & Excellent Function] Portable VFL Pen:Small size lightweight type is easy to field testCrash-proof & Dust-proof: Metal pen body With low battery detection indicator,This Visual Fault Locator Can Operates Either In CW Or Pulsed Mode,Fiber optic vfl lighting 2Hz glint or continuous output.
  • [Wide Application] Universal 2.5mm connector designed for ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering;CATV Engineering optic network Maintenance;Optical Telecommunications;Optical Measurement drive engineering;optical device production and research. LC interface requires additional adapter.

A Pair of 1.25G/s Bidi Gigabit Multi-Mode Fiber Ethernet Media Converter with 2PCS Bidi SFP LC Dual Transceiver Module Included, 10/100/1000Base-Tx to 1000Base-SX SMF RJ45 to SFP Slot up to 550M

  • Fiber Optical Port: 1.25Gbps SFP port, connecting the BiDi Multi-Mode LC Dual transceivers up to 550M(2 SFP LX Transceiver included); Fiber Type: MMF, Cable Type: UTP/STP Cat.5e for 100 meters.
  • What You Get: 2pcs Gigabit Multi-Mode Ethernet SFP Slot media converters; 2pcs SFP BiDi LC Dual Multi-Mode transceiver; 2pcs AC/DC Power Supply; 1 x User's Manual. Support wide power supply voltage (100V-240V), Power Supply: 5V-1A, UL Certified.
  • [100% Money Guarantee] 15 years OEM factory competency, Most efficient technical support with superb processing technology.Our committed to provide the best product and services to every customer.

1000BASE-T Gigabit SFP to RJ45 Copper Ethernet Modular Transceiver for Cisco,Meraki,Ubiquiti,D/TP Link,Supermicro,Netgear,Broadcom, 1.25G SFP-T CAT5E/CAT6 up to 100m Mikrotik S-RJ01

  • Widely Used in fiber switches,routers,NIC,server or other fiber optic equipments with 1Gb SFP ports.Compatible with MSA compliant equipment Cisco Meraki,Ubiquiti,D-Link, Supermicro,TP-Link,Broadcom,Linksys and Huawei,Mikrotik,Netgear,Supermicro Other Open Switches.
  • Gigabit SFP to RJ45 Copper Module 10/100/1000M Auto-Negotiation;Data Rate:1.25Gb/s, Interface:RJ45 connector; Reach:up to 100M transmission over CAT.5e Cable Type.
  • Toolco is a professional manufacturer and accept customized orders. If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options).After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality transceivers,every transceiver has been tested for 28 steps before shipping.

Visual Fault Locator 30KM, VFL Fiber Optic Light Source Tester 30mW, Red Light Pen Equipment for 2.5mm Universal Connector, FC/SC/ST/LC Adapter for CATV Telecommunications, Fiber Network Cable Test

  • [Accurate Identification] Accurately detect and locate fiber breaks,poor connections,bending or crackingVisual Fault Locator will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area.
  • [Practical Design & Excellent Function] Portable VFL Pen:Small size lightweight type is easy to field testCrash-proof & Dust-proof:Metal pen body with low battery detection indicator,This VFL light Can Operates Either In CW Or Pulsed Mode,Fiber optic vfl lighting 2Hz glint or continuous output.
  • [Wide Application] Universal 2.5mm connector designed for LC,ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering;CATV Engineering optic network Maintenance;Optical Telecommunications;Optical Measurement drive engineering;optical device production and research.

4 Pack 1.25G 850nm Multimode SFP LC Transceiver Fiber Module 550 Meters 1000Base-SX LC MMF for Cisco GLC-SX-MMD/SX-MM/SFP-GE-S,Fortinet,Ubiquiti UniFi UF-MM-1G,Mikrotik S-85DLC05D Meraki MA-SFP-1GB-SX

  • Plug and Play & Durable: Hot-swappable, Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function.
  • Fiber Type:1.25Gb/s Dual LC OM3 Fiber Module 4Pcs; Wavelength: 850 nm Multimode; Reach: up to 550 meters; with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP MSA Compliant, IEEE 802.3z compliant.
  • Widely Used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports. Compatible with MSA compliant equipment Cisco Meraki,Ubiquiti,D-Link, Supermicro,TP-Link,Broadcom,Linksys and Huawei,Mikrotik,Netgear,Supermicro Other Open Switches.

toolco 20Pcs Torch Wicks Replacement - Fiberglass Wick for Tiki Torches and Outdoor Lights - 0.5 by 9.85 Inch

  • Odorless and Safe: NO SMOKE & NO BAD SMELL, Made of braided fiberglass that are designed to efficiently draw fuel upward, these oil lamps wicks are odorless and safe, a long lasting wick with minimal smoke, wicking oil to the flame but never burning the wick itself.
  • Package included: 20pcs Replacement Fiberglass Wicks. Length: 9.85" (25 cm).Diameter: 1/2" (1,25cm). Long lasting, well woven, easy to cut. The wicks can be trimmed to the size you want. Lanterns garden light wicks are well woven.
  • Wide Applications: These replacement wicks can be used in all types of tiki torch systems, work with any kind of oil and standard glass bottles: whiskey, bourbon, wine, beer, etc.Wicks work great with tiki-inspired torches, lanterns and oil lamps; also it can be applied for oil lamps and lanterns, you can use them according to different need.

A Pair of 2 Pack Single Mode Dual SC Fiber Gigabit Fast Ethernet Media Converter, Bidi Mini 1x 10/100/1000Base-T RJ45 to 1000Base-SC Slot Ethernet Media Converter, up to 30km 1310-nm, AC 100V~240V

  • Fiber Optical Port: 1.25Gbps, Fiber Type SMF 1310nm wavelength, 2x RJ45 Port: CAT5E/CAT6 10M/100M/1000M, Cable Type: UTP/STP Cat.5e for 100 meters. Supports jumbo frame size 9K byte,Power Supply: 5V-1A, UL Certified, Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status.
  • Product List: 2x Single-mode Gigabit Dual SC Ethernet Media Converter, 2x DC Power Adapter, 1x Product Manual. Dual SC type single-mode fiber port connects over distances of up to 30km (18.6miles)
  • Modulization configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status.

Fibre Optic Termination Tool Kit - 9 in 1 Assembly FTTH Tool kit with FC-6S Cleaver Optical Power Meter Finder - 30km Visual Fault Locator Optical Pliers Cable Cutter Stripper

  • Optical fibre cold construction kit is Fttx FTTH rapid connection in the construction of rubber insulated wire stripping, fibre cutting, cleaning and testing.It is a simple operation for the user to remove or install the single fibre adapter and alternate between mass and single fibre cleaving.High-quality FC6S Fibre Cleaver Recommended FTTH Cold Welding for Single or Multi-Mode Core Cutting and repair of Fibre Size 125um and a Skin Diameter 250~900um.
  • FTTH Equipent Accessories: 9 in 1 Assembly FTTH tool kit Includes Optical Power Meter which works with LC, FC, ST, SCAPC, 30km Visual Fault Locator tester, FC-6S Fibre Cleaver, Clauss Stripper, Fibre Optic Splicing Tool, Black Carry Bag, Alcohol Bottle, Fixed Length Rail.FibreOptic Stripper w/Compact Durable Design Suitable for 3mm, 2mm Indoor Fibre Optic jumper Cables.
  • We source our own fibre products for HDTV, SDI, and Analog MATV systems. your mission critical supplier for all Optical Fibre needs. FTTH optical fibre cold construction kit is Fttx FTTH rapid connection in the construction of rubber insulated wire stripping fibre cutting cleaning and testing process.

4 Pack 10G Sfp LC MMF300m 10GBase-SR SFP+ Transceiver, 10G 850nm MMF, up to 300 Meters, Compatible with Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UF-MM-10G, Mikrotik, Netgear, D-Link and More

  • Compatible with MSA compliant equipment from Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UF-MM-10G, Mikrotik, D-Link, Huawei, Netgear, Supermicro and More; CONNECTIVITY: 10G BASE-SX SFP transceiver for multimode fiber, 850 nm wavelength, supports up to 300m.
  • 4 Pack 10GBase-SR SFP to LC Multi Mode Data Rate:10G; Wavelength: 850-nm Multi-Mode module; Port Type: LC/UPC; Reach: up to 300m using 50/125um Multi-Mode Fiber, Supports full-duplex Fiber Type: Dual LC OM3/OM4 multi-mode fiber.
  • Widely Used: Work with multi-mode fiber connection Connects a network switch, server, or NIC with SFP to a Gigabit fiber channel network with multimode LC for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications.

2PCS Visual Fault Locator 30km Fiber Optic Cable Tester Meter Red Light VFL with 2.5mm Universal Connector for FC/SC/ST Adapter Pen for CATV Telecommunications Engineering Maintenance

  • 1. Easy to Check Fiber Faults - 2PCS visual fault locator can accurately detect and locate fiber breaks, poor connections, bending, or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light.
  • 2. Excellent Function - This VFL device is portable and easy for a field test with multiple functions such as constant output power, lower battery warning, long battery life, and long-distance detection.
  • 3. WIDELY USED - 2.5mm Universal Connector - the connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables.

LC-MM 6Port OM3 Box Cables 12 Port Wall Mount Fiber Enclosure with Spool OM3 Multimode LC-UPC Kit (Includes 1 Meter 12 Strand LC-UPC OM3 Pigtail and 6 Port Duplex OM3 LGX Loaded Panel

  • 12 Color Mark - 12 Strands Cable Individually color coded, Saves time and prevents incorrect patching with color-coded pigtails. Plug and Play: Environmentally Stable with strong compatibility.Very convenient in use. Conforms to industrial standard 100% optical test so as to ensure the reliability.
  • 6 Duplex OM3 Panel Kit - Wall Mount Fiber Enclosure with Spool 12 Strands Multimode LC Pigtail; Dimension 255mm*130mm*40mm, Can be mounted vertically or horizontally;The kit provides optimum protection, keeps your fiber distribution organized when space is limited and maintains the integrity of your connections.
  • Zirconia Ceramic Ferrule - Adopt high quality ceramic ferrule, with better coaxiality and size precision. high quality porcelain bushing can provide low insertion loss and better durability; The protective outer jacket is removable, for tighter bend radius requirements or high density installations.

toolco Candle Dye for Soy Wax, 14 Popular Colours Candle Dyes for DIY Candles Making Bulk 2.2 Ounce Soy Wax Dye for Making 100 lb Wax

  • Use: 1. Melted temperature: 140-230 ° F, mix the candle wax dye carefully for at least 2-3 minutes. 2. Small dosage: 0.02 to 0.06 ounces soy candle wax dye for 1 pound candle mass are required for full colouring of the candle mass. The colour range depends on the amount of dye used. 3. Available in multiple colours: they can be mixed well with other wax colours.
  • Product introduction: candle wax dye for candle making, with which colourful candles can be made. Contains 14 of the most popular colours for a total of 1.68 ounces. Tips:Our color block is a highly concentrated product, the ratio is 1:1000, each color is 0.12oz and can dye 3400g (7.5lb) wax.
  • Perfectly melted: dissolved dye blocks do not form clots in the candle mass, and the stains are even, the candle surface does not flake or tarnish over time. So let the process of candle making runs smoothly and quickly. Soy paraffin wax can be dyed very quickly and candle wax dye is enough to make the candle vivid and pure.

Fibre Optic OM3 Kit 6 Port Duplex LGX Loaded Panel, Wall Mounted Fibre Optic Housing Box with Module Coupler Splicing, Includes 1 Metre 12 Strands Multimode LC-UPC Fibre Pigtail

  • 12 Colour Mark 12 stranded cable individually colour-coded, saves time and prevents incorrect patching with colour-coded pigtails. Plug and play: Environmental stable with strong compatibility. Very convenient to use. Complies with industry standard 100% optical test to ensure re.
  • 6 Duplex OM3 Panel Kit Wall Mounted Fibre Optic Housing with Spool 12 Strands Multimode LC Pigtail Dimensions 255mm x 130mm x 40mm Can be mounted vertically or horizontally The kit provides optimal protection, keeps your fibregl distribution organised when space is limited and maintains the integrity of your connections.
  • Widely used Perfect for use in data centers, on-site installations, fiber optic LAN, WAN, telecommunications and data processing networks CATV, instruments, communication system. Environmentally stable with strong compatibility. Very convenient to use. Complies with the 100% optical test of industry standard to ensure re. Components included: SC fibre transmission

1.5 Meter 12 Strands SingleMode 9/125 LC-UPC Fiber Optic Pigtail, 12 Colour Coded LC Cable Fiber Optic Patch Cable with Zirconia Ceramic Ferrule Connector for Fusion Splices

  • Zirconium oxide ceramic ferrule: adopt a high-quality ceramic ferrule with better coaxiality and size precision. High quality porcelain bushings can provide low insertion loss and better durability; The protective outer sheath is removable for tighter bending radius requirements or high-density installations.
  • Fibre 12 strands pigtail: fibre type single mode; connectors LC/UPC; 1.5 m 12 strands colour coded; different types of plugs and different lengths can be selected, thus flexible. Standards conformed to: YD/T926I; SO/IEC 11801; TIA/EIA-568-B.
  • Widely used: Perfect for use in data centers, on-site installations, fibre optic LAN, WAN, telecommunications and data processing networks CATV, instruments, communication system.

1.5 Metre LC Cable 6-Core SingleMode 9/125 LC-UPC Fibre Optic Pigtail, 6 Colour Coded Fibre Optic LC Patch Cable with Ceramic Ferrule Connector for Fusion Splices

  • Zirconium oxide ceramic ferrule. Take a high-quality ceramic ferrule with better coaxiality and size precision. High-quality porcelain bushings can provide low insertion loss and better durability; the protective outer sheath is removable for tighter bending radii requirements or high-density installations.
  • Fibre 6 stranded pigtail fibre type single mode cable; connections LC/UPC; 1.5 m 6 strands colour coded; different plug types and different lengths selectable, thus flexible. Standards conformed to: YD/T926I; SO/IEC 11801;TIA/EIA-568-B
  • Widely used Perfect for use in data centers, on-site installations, fiber optic LAN, WAN, telecommunications and data processing networks CATV, instruments, communication system.

toolco A wide selection of 12 popular colours candle wax dye for candle making, 60g soy wax dye for making 100lb wax, DIY scented candles

  • Use: 1. Melted temperature: 140-230 , candle wax dye carefully mix for at least 2-3 minutes. 2. Small dosage: 0.02-0.06 oz soy candle wax dye for 1 pound candle mass is necessary for full colouring of the candle mass. The colour range depends on the amount of dye used. If you want to darken the colour, you can add more candle colour.
  • Product introduction: candle wax dye for candle making, with which colourful candles can be made. Contains 12 of the most popular colours. Each color is 4.5g (0.16oz), total 58g. Available in multiple colours: they can be mixed well with other wax colours. The candles are made with many bright and colourful dyes (no air bubbles ever fade, natural and environmentally friendly).
  • Perfectly melted: dissolved dye blocks do not form clots in the candle mass and the stains are even. Candle surface will not chip or tarnish over time. So let the process of candle making runs smoothly and quickly. Soy paraffin wax can be easily absorbed in colour and candle wax dye is enough to make the candle vivid and pure.

Toolco FAQs