PSI Woodworking

4.3

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the PSI Woodworking range from £17.79 to £174.85, and the average price of all the products is about £55.68. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

PSI Woodworking offers 56 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The PSI Woodworking review will examine the core factors of the brand and its products to help you make an informative buying decision.

PSI Woodworking Best Sellers

Last Updated: 14 Jun 2023

PSI Woodworking LA3418X Lathe Headstock Spindle Adapter 3/4" x 16tpi to 1" x 8tpi

Buy on Amazon Find on eBay

Allows a 3/4" x 16tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories

Convert a 3/4" x 16tpi lathe headstock spindle to 1" x 8tpi

Weighs .2 pounds

Made of steel

Flats allow for solid wrench tool grip for tightening and loosening

PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

Drill Chucks

Buy on Amazon Find on eBay

Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter

Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes

This "C-Series" chuck is compatible with all "C-Series" jaws and accessories

Includes screw chuck, allen wrench, and a set of tightening levers

Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal; Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal

PSI Woodworking LA341018 Lathe Headstock Spindle Adapter 3/4" x 10tpi to 1" x 8tpi

Buy on Amazon Find on eBay

Allows a 3/4" x 10tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories

Convert a 3/4" x 10tpi lathe headstock spindle to 1" x 8tpi

Wrench not included

Made of steel; Weighs .85 pounds; Extends spindle length approximately 1-1/2"

Flats allow for solid wrench tool grip for tightening and loosening from spindle

PSI Woodworking PKMBCM3 Turn Between Centers Mandrel for Drill Chuck Headstock Insert System

Drill Chucks

Buy on Amazon Find on eBay

No mandrel shaft to bend

Turn more accurate, consistent, and concentric pen barrels

Includes a headstock drill chuck insert and a live #2MT tailstock insert

Each insert has a 7mm pin to mount bushings

Drill chuck not included

PSI Woodworking CJAWXL 8-1/4" Flat Jaws for PSI C-Series Lathe Woodturning Chucks

Buy on Amazon Find on eBay

Grips workpieces from 2-3/4" to 8-1/4" diameter; (7) positions for bowl rim placement; Made from cast aluminum; Weighs 1.50 pounds

Ideal for finishing and polishing woodturning bowl and plate bottoms

Includes (16) soft rubber gripper bumper pins in two lengths to securely hold your workpiece: (8) 1/2" & (8) 3/4"; Pins have a 6mm thread; Also includes Allen Wrench

CJAWXL repaces both CJAWFJ1 and CJAWFJ2

CJAWXL is a PSI C-Series accessory that is compatible with all PSI C-Series chucks (CSC3000C, CSC3500SE, CUG3418CC, CMG3C, CSC2000C)

PSI Woodworking CF4 4" Lathe Faceplate for 3/4" x 16tpi Spindle Without Screwchuck

Buy on Amazon Find on eBay

Model Number: CF4

Country Of Origin: China

Item Package Weight: 1.8 lb

Item Package Dimension: 4.75" L x 1.5" W x 4.75" H

PSI Woodworking LBUFFSYS 3-Step Lathe Buffing System

Polishers

Buy on Amazon Find on eBay

System includes: (1) #2MT 16" heavy duty mandrel, (3) 8" fabric buffing wheels (Linen, Linen/Flannel Combo, Flannel), (3) buffing compound bars (Tripoli, White Diamond, Carnuba Wax), hardware packet, and instructions

This 3-step polishing system enables you to buff your woodturning projects directly on your lathe by mounting the included #2 Morse Taper mandrel in your lathe's headstock

Requires a lathe with a minimum of 1/2 horsepower and a heavy duty live tailstock center

International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

For best results, pre-treat your workpiece with danish oil

PSI Woodworking Products CF3J Faceplate 1-Inch by 8TPI 3-Inch Diameter

Drill Chucks

Buy on Amazon Find on eBay

Fits any lathe with a 1-Inch by 8TPI spindle thread

Perfect for all small bowl turning

Has machined flats to grip with a wrench - easy on and easy off

All steel construction

3-Inch diameter faceplate with 4 screw mounting holes

PSI Woodworking LX310 1/4" Spindle Gouge M2 HSS Woodturning Chisel

Wood Chisels

Buy on Amazon Find on eBay

Can also be used for facing cuts, shallow hollowing, and beading

With it's shallow flute, ideal use is for finishing spindles, pens, and other small woodturning workpieces

Total tool length is 15-1/4" with a 5-1/2" blade and 9-3/4" handle

Hardwood handle with brass ferrule

Blade is made from M2 High Speed Steel

PSI Woodworking LX030 3/4" Oval Skew M2 HSS Woodturning Chisel

Wood Chisels

Buy on Amazon Find on eBay

Can also be used for cutting vee-grooves, forming beads, facing off the end of cylindrical workpieces, and can even be used for shaping shallow concave curves in spindles

Ideal for cutting precise smooth finish surfaces on the outside of spindles; Oval profile makes this skew easy to roll on the tool rest and simplifies contouring applications

Total tool length is 16" with a 6" blade and 10" handle; Blade is 3/4" wide

Hardwood handle with brass ferrule

Blade is made from M2 High Speed Steel

PSI Woodworking Products TM31 1/2-Inch Drill Chuck with #1 Morse Taper Arbor (1/2" 1MT)

Drill Chucks

Buy on Amazon Find on eBay

This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #1MT accessories

Includes the 1/2" Drill Chuck, #1 Morse Taper Arbor, and Jaw Tightening Key

The #1MT Arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included

Removes easily with knock out bar

Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more

Psi Woodworking Csc3000C Barracuda Wood Lathe Key Chuck System

Drill Chucks

Buy on Amazon Find on eBay

Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs. ; pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter

Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case

With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe; including bowls, spindles, pens, other small turning projects, and much more

This is a C-Series Chuck; Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!

#1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8"; #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4"

PSI Woodworking Products TM32KL Keyless 1/2-Inch Drill Chuck with a 2 MT Mount

Drill Chucks

Buy on Amazon Find on eBay

Drill chuck mounts in the 2 MT

Will hold drill bits up to 1/2-Inch in diameter

Tightens by hand without the need for a chuck key

Removed easily with a knock-out bar

Can be used in either the headstock or tailstock

PSI Woodworking LTCA18 Live Tailstock Chuck Adapter to 1" x 8tpi Thread with #2 Morse Taper Mount

Buy on Amazon Find on eBay

Mounts to tailstock with the included #2 Morse Taper arbor

Converts your lathe's #2MT dead tailstock to 1" x 8tpi threaded live tailstock

Wrench is included

Ideal for an additional secure workpiece mount from tailstock end; Allows precision centering of spindles or dowels at the tailstock end; Provides the ideal system for the mounting of bowls for hollowing

After being mounted, tailstock is converted from dead to live and it will accept all 1" x 8tpi threaded lathe tool accessories

PSI Woodworking PKM-BL Screw-On Pen Mandrel 1" x 8tpi

Hex Wood Screws Phillips Wood Screws

Buy on Amazon Find on eBay

Also includes (7) 7mm bushings, (1) knurled nut, (1) 7mm Brad point drill bit

Screw-on pen mandrel pre-threaded to 1" x 8TPI

International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Compatible with PSI Woodworking mandrel savers (Pkmsts1 & Pkmsts2)

7mm mandrel shaft (.244" OD)

8pc Benjamin's Best HSS Micro Detailing Anniversary Set

Chisel Sets

Buy on Amazon Find on eBay

M2 High Speed Steel

Turn intricate details on larger turnings, or turn tiny intricate projects with this terrific micro set

Set includes: 1/8" & 3/16" Spindle Gouges, 9/64" Beading Tool, 9/64" Diamond Point, 9/64" Square Nose Scraper, 3/8" x 1/8" Parting Tool, 1/8" Round Nose Scraper, 3/8" x 1/8" Skew Chisel

7.5" tool length with 2.25" blade & 5.25" handle

PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck

Drill Chucks

Buy on Amazon Find on eBay

Comes with a 1" x 8 tpi Headstock Mount

Mounts in a lathe without a Morse taper

Precision 1/2" three jaw drill chuck

Includes a drill chuck key

PSI Woodworking CSCPENCHK2 Large Dedicated Pen Blank Drilling Lathe Chuck Capacity

Drill Chucks

Buy on Amazon Find on eBay

Thread chuck onto your lathe's headstock spindle; Mount a drill bit in a drill chuck in your lathe's tailstock; Advance drill bit into blank while lathe is spinning

Drill a perfectly centered hole in your pen blank or bottle stopper blank directly on your lathe

Use the standard jaw position to drill from 1/4" to 1. 5". Reverse the jaws to drill from 1. 5" to 2. 5"

Reversible jaws on chuck will secure blanks up to 2. 5" square x 5" long

Chuck is pre-threaded to 1" x 8tpi; Weighs 2. 35 lbs; Diameter 3. 25"; Includes (2) tightening levers to open and close the chuck jaws

PSI Woodworking FAQs

How much do PSI Woodworking products cost?

PSI Woodworking LA3418X Lathe Headstock Spindle Ad... is the top 1 product we recommend in the PSI Woodworking buying guide, which is priced at £17.79, you can view it on Amazon page.
PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe... is one of the popular products we recommend in the PSI Woodworking buying guide, which is priced at £88.6, you can view it on Amazon page.
PSI Woodworking LA3418X Lathe Headstock Spindle Ad... is the cheapest product in the PSI Woodworking picks list, which is priced at £17.79, you can view it on Amazon page.
Psi Woodworking Csc3000C Barracuda Wood Lathe Key... is the most expensive product in the PSI Woodworking picks list, which is priced at £174.85, you can view it on Amazon page.

What do customers think of PSI Woodworking?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and PSI Woodworking is worth your consideration.

Who are the manufacturers of the PSI Woodworking products?

Most of the PSI Woodworking products are produced by PSI Woodworking Products. The manufacturer provides PSI Woodworking with a steady supply of products, and they have a good cooperative relationship with each other.

Similar Brands