Skip to content
Assorts feature image

Assorts

4.7
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Assorts range from £8.95 to £92, and the average price of all the products is about £38.39. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Assorts offers a variety of products, there are 238 products available, 15 of which were analyzed in detail and recommended to customers. The Assorts review will examine the core factors of the brand and its products to help you make an informative buying decision.

Share

Assorts Best Sellers

Last Updated: 15 Jun 2023

New KNURLING Tool Pivot Head Diamond Medium Pitch Pattern 1/2" SQ. Shank-Lathe Engineering Machine Tools

New KNURLING Tool Pivot Head Diamond Medium Pitch Pattern 1/2" SQ. Shank-Lathe Engineering Machine Tools Cover
  • Holder Size(Inch) : 1/2 x 1/2 x 4-1/2" Inches (12.7 x 12.7 x 115 mm)
  • Raises an angled ridges in a diamond pattern on any workpiece for a decorative finish or slip proof grip.
  • Knurl Dim.(inch) : 3/4 x 3/8 x 1/4" Inches ( 19 x 9.52 x 6.35 mm)
Buy on Amazon Find on eBay
Power Milling Machines

Rotary Table (3" Regular 4 Slots (80 mm))

Rotary Table (3" Regular 4 Slots (80 mm)) Cover
  • Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero.
  • Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3"Inches ) and is most popular light weight rotary table for small and light duty milling operations.
  • We also offer various accessories like Chucks, Back plates, Clamp kits, Collet Adaptors and Tailstock to suit these rotary table functioning. Pls check our other listings if you need anything from this category.
Buy on Amazon Find on eBay

Brand New Dickson S2 / T2 Quick Change Tool Post Set for Colchester & Harrison Lathes (Standard Holder ONLY)

Brand New Dickson S2 / T2 Quick Change Tool Post Set for Colchester & Harrison Lathes (Standard Holder ONLY) Cover
  • Suitable for Colchester Student / Master and Harrison & Similar Lathes
  • Standard Holder of Dickson Style T2 Quick Change Tool Post .Dimensions of the Main Block to which this Holder fits is 98 x 98 x 72 mm.
  • Tool Holder Capacity is 28 mm
Buy on Amazon Find on eBay
Nylon Paintbrush Sets Synthetic Paintbrush Sets

All Purpose Professional Painting Brush Kits for Acrylic Watercolor Oil Painting-Synthetic Nylon Hair bristles Wood Handle ((Golden Fan 6 Pcs Set))

All Purpose Professional Painting Brush Kits for Acrylic Watercolor Oil Painting-Synthetic Nylon Hair bristles Wood Handle ((Golden Fan 6 Pcs Set)) Cover
  • All-PURPOSED PAINTING BRUSHES SETS: Nice combination of tips for all design purposes. Works well with watercolor, oil, gouache, acrylic painting, body, nails, facial painting, miniature, model, ceramics, arts and crafts painting and so on.
  • Professional paintbrushes with a variety of shapes make mixing color more easy, perfect for artists, amateurs, students, kids and painters of all levels. Wonderful gift for your friends and families who have fun in painting!
  • Set of 6 Pcs Includes 1 Pc each of Fan Shape Brush Sizes of 2,4,6,8,10 and 12 No.
Buy on Amazon Find on eBay
Annular Cutters

Annular Cutter 1/2" Shank Tool Steel Holder (Hard & Ground) with Lock Screw- Accepts/Suit 19 mm Shank rota broaches

Annular Cutter 1/2" Shank Tool Steel Holder (Hard & Ground) with Lock Screw- Accepts/Suit 19 mm Shank rota broaches Cover
  • Annular cutter 1/2" shank tool steel holder (Rota broaches) with lock screw- Accepts/ suit 19 mm shank rota broaches
  • Made of alloy steel-hardened and ground in close tolerances.
  • This holder can be used in a drill press, lathes, mills or magnetic drilling machines.
Buy on Amazon Find on eBay

Precision Lathe Tailstock Imperial Rigid Die Holder for threading Lathe Machine- Engineering Tools (MORSE TAPER 2MT)

Precision Lathe Tailstock Imperial Rigid Die Holder for threading Lathe Machine- Engineering Tools (MORSE TAPER 2MT) Cover
  • Made of quality tool steel. Shanks are precisely ground.
  • Quality threading kit for your lathe machine available in Morse taper MT2 shank tailstock
  • The morse taper goes inside your lathe's tailstock taper & the body of the holder having threading die floats on the parallel part of the shank while creating threads on the round work piece hold in the lathe machine.
Buy on Amazon Find on eBay

Assorts' Taper Turning Attachment with Live Revolving Center For Turning Tapers on Lathe Machine II Supplied in Plastic Suitcase II Check Working Video in Description (Morse Taper 2MT)

Assorts' Taper Turning Attachment with Live Revolving Center For Turning Tapers on Lathe Machine II Supplied in Plastic Suitcase II Check Working Video in Description (Morse Taper 2MT) Cover
  • Gives you the freedom from old traditional method of off-setting the tailstock of your lathe , when you wanted to do the metal /wood turning in a taper profile.
  • Made out of casting and tool steel, Much improved and precise quality of taper turning attachment than our previous model , is available in MT1, 2 & 3 Morse Tapers.
  • The attachment's slides movement is control through a fine metric thread screw, and can be shifted 25 mm left & right using the handle rotation.Pls note that the 1 handle rotation will off set the attachment by 1 mm
Buy on Amazon Find on eBay

Mini 2"/ 50 mm Steel Vice Vise Work Holding Engineering Machine Tools

Mini 2"/ 50 mm Steel Vice Vise Work Holding Engineering Machine Tools Cover
  • Length x Width : 90 mm x 50 mm. Maximum Jaw Opening possible is 45 mm
  • Quality Mini 2" /50 mm Mini Steel Vice Vise-Precisely Ground
  • Quick Fast Shipping vide a Tracking Awb no to USA & Worldwide
Buy on Amazon Find on eBay

Small Body Live Revolving Center Centre MT1 Shank for Lathe-Metal Turning-Under 2 Microns Run Out

Small Body Live Revolving Center Centre MT1 Shank for Lathe-Metal Turning-Under 2 Microns Run Out Cover
  • DOUBLE BEARING. BODY DIAMETER 23 MM .OAL 97 MM.
  • SMALL BODY LIVE REVOLVING CENTER CENTRE FOR MT1 LATHE MACHINES
  • SUPER PRECISE -UNDER 2 MICRON RUN OUT
Buy on Amazon Find on eBay

Lathe Spindle Adapter Fits Shopsmith Mark V 5/8" Spindle to 3/4" x 16 TPI Thread Chuck

Lathe Spindle Adapter Fits Shopsmith Mark V 5/8" Spindle to 3/4" x 16 TPI Thread Chuck Cover
  • This spindle adapter is bored 5/8" for the plain Shopsmith spindle and has a locking set screw.
  • Brand new Lathe Spindle Adapter to fit 5/8" plain Shopsmith spindle to 3/4" x 16 TPI threaded chucks and other lathe accessories.
  • The other end is threaded 3/4- 16 (3/4" diameter x 16 threads per inch) for lathe chucks and accessories.
Buy on Amazon Find on eBay

Assorts' Exclusive World's 1st Direct Fitting Ball Turning Attachment For 7 x 14 Mini Lathe -Turns Concave & Convex Metalworking Engineering Tools

Assorts' Exclusive World's 1st Direct Fitting Ball Turning Attachment For 7 x 14 Mini Lathe -Turns Concave & Convex Metalworking Engineering Tools Cover
  • Comes with 2 x Carbide Cutting Inserts with 3 cutting edges
  • Fits straight away on the cross slide of the 7 x 14 & similar size mini lathes.
  • Turns Concave & Convex Metal Balls easily. This is world's 1st & exclusive direct fit ball turning attachment for a Mini lathe. Check out its working video on below weblink. The 2 x aluminum balls shown in the image are not for SALE !!- This are shown for the customer's reference for illustration purpose since these are being turned using this attachment on our CJ18A 7 x 14 mini lathe
Buy on Amazon Find on eBay

Adjustable Center Height Parting Cut Off Tool Holders for Metal Lathe Machines (Shank 10 mm, Blade 3/4" Wide)

Adjustable Center Height Parting Cut Off Tool Holders for Metal Lathe Machines (Shank 10 mm, Blade 3/4" Wide) Cover
  • Made of Tool Steel- Hardened & Precisely Ground
  • Quality T Type Cut off Parting Tool Holder for Metal Lathe Machines
  • M2 Grade HSS Blade Size is 1/8" x 3/4" x 6". Shank Size is 10 mm & can be adjusted to a height variance upto 10 mm
Buy on Amazon Find on eBay
Metal Hand Cutters Hand Cutters

Universal Machine for Manual Bending of Metal Bar, Tube, Pipe

Universal Machine for Manual Bending of Metal Bar, Tube, Pipe Cover
  • An Ideal Machine for Multi-forming Curves, Circles & Coils designs in Wire/ Rod up-to 5/16"(~approx 8 mm size) & flats of 1" x 1-1/8" dimensions.
  • Quality Universal Hand operated machine for bending metal bars, tubes & pipes.
  • These circular & Sharp Edge Dies gives the freedom of making different curve sizes of a same design. It also has 3 pins to works as stoppers, or torque pins while bending and forming different designs.
Buy on Amazon Find on eBay

Quick Change Tool Post Holder for Boxford, Warco & Similar Size Lathe Machine (T51 STD Holder W/Parting Holder & 4 Spare Blades)

Quick Change Tool Post Holder for Boxford, Warco & Similar Size Lathe Machine (T51 STD Holder W/Parting Holder & 4 Spare Blades) Cover
  • Made of Quality tool steel-Hardened and precisely ground.
  • Superb Quality Quick change Tool Post Standard Holder suits to Boxford, South bend and similar lathes of center heights from 5" to 6"(125 mm to 150 mm)
  • Tool capacity of this Holder is 16 mm .Block Having Size (L x W x H) : 73 x 73 x 51mm, Mounting Bore : 5/8” (16mm)
Buy on Amazon Find on eBay

Adjustable Center Height Parting Cut Off Tool Holders for Metal Lathe Machines (Shank 10 mm, Blade 1/2" Wide)

Adjustable Center Height Parting Cut Off Tool Holders for Metal Lathe Machines (Shank 10 mm, Blade 1/2" Wide) Cover
  • Made of Tool Steel- Hardened & Precisely Ground
  • Quality T Type Cut off Parting Tool Holder for Metal Lathe Machines
  • M2 Grade HSS Blade Size is 5/16" x 1/2" x 3-1/2". Shank Size is 10 mm & can be adjusted to a height variance upto 8 mm
Buy on Amazon Find on eBay

Assorts FAQs