Skip to content
RATTMMOTOR feature image

RATTMMOTOR

4.8
Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the RATTMMOTOR range from £15.88 to £303.98, and the average price of all the products is about £81.99. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

RATTMMOTOR offers 147 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The RATTMMOTOR review will examine the core factors of the brand and its products to help you make an informative buying decision.

Share

RATTMMOTOR Best Sellers

Last Updated: 14 Jun 2023

3D Printer Nozzles

RATTMMOTOR Stepper Motor Mounting Bracket 3 PCS Nema 23 Mount with Screws for CNC Engraving/Milling Maschine

RATTMMOTOR Stepper Motor Mounting Bracket 3 PCS Nema 23 Mount with Screws for CNC Engraving/Milling Maschine Cover
  • [HIGH QUALITY MATERIAL] - The holder is made of alloy steel, strong and durable, and not easily deformed.
  • [PACKAGE CONTAINS ] - 3 pieces bracket for Nema 23 stepper motor, size 68x68x64mm, black
  • [WELL MADE] - the slots and openings on the bracket went fine stamped to ensure accurate dimensions and perfect for use with the engine.
Buy on Amazon Find on eBay
Linear Motion Guides

RATTMMOTOR EBX1605 300mm Stroke Linear Stage Actuator Double Optical Axis1605 Ball Screw Linear Slide Rail CNC Linear Motion Rail Guide with Nema23 Stepper Motor 1.8° 3A 1.2N.m for CNC Milling Machine

RATTMMOTOR EBX1605 300mm Stroke Linear Stage Actuator Double Optical Axis1605 Ball Screw Linear Slide Rail CNC Linear Motion Rail Guide with Nema23 Stepper Motor 1.8° 3A 1.2N.m for CNC Milling Machine Cover
  • [Flexible Installation] 80mm aluminum profile base, M4 movable nut at the bottom, side mounting groove for easy fixing, M3 nut can be installed with limit, easy to install. This linear stage can be used in combination with multi-axis, horizontal cross, gantry type, three-axis type, four-axis type, etc.
  • [Compact Structure] The base is 2080 profile, the tail end bearing piece, front end is equipped with Nema23 stepper motor and the flange piece connecting the motor, with the load-bearing slide table, the 1605 lead screw and the coupling, adding a stable bearing, and the double optical axis design. Working Length: 300mm/11.81inch.
  • [Strong Load Capacity] Two 12mm optical shaft transmission, double shaft support load is larger, the horizontal load is 50KG/110.23Ib, and the vertical load is 10KG/22.05Ib. It is suitable for lathes, CNC machine tools, machining, mechanical equipment, automation devices and other industrial automation fields.
Buy on Amazon Find on eBay
Motor Drivers

RATTMMOTOR 500 W Air Cooling Spindle Motor Kit 0.5 kW ER11 12000 rpm Mini Spindle Motor and 220 V PWM Speed Controller and 52 mm Mount Bracket with Screws for Engraving

RATTMMOTOR 500 W Air Cooling Spindle Motor Kit 0.5 kW ER11 12000 rpm Mini Spindle Motor and 220 V PWM Speed Controller and 52 mm Mount Bracket with Screws for Engraving Cover
  • High precision concentricity deviation less than 0.03 mm (the actual measured value is close to 0.01 mm)
  • Spindle motor - power: 0.5 kW, idle speed: 2000-12000 rpm, torque: 0.5 Nm, insulation resistance: > 2 mega ohm, collet ER11
  • Speed controller - speed converter input voltage: AC100-AC220V ± 10%, 50/60Hz; current limit: 6A; wiring: terminal type (convenient and fast)
Buy on Amazon Find on eBay
Engraving Pens

RATTMMOTOR 6 Axis Mach3 Wireless Handwheel Remote Control MPG Pendant CNC Handwheel Manual Pulse Generator for Engraving/Milling Machine(WHB06B)

RATTMMOTOR 6 Axis Mach3 Wireless Handwheel Remote Control MPG Pendant CNC Handwheel Manual Pulse Generator for Engraving/Milling Machine(WHB06B) Cover
  • ELIMINATION CAPABILITY - The wireless handwheel uses frequency hopping transmission which has strong anti-interference ability. Using 433 MHz, ISM wireless FR transmission technology, transmitting power 10 dB, receiving sensitivity -98 dB
  • PACKAGE INCLUDES - 1 x 6 Axis Wireless Handwheel, 1 x wireless USB receiver, 1 x English user manual
  • LCD DISPLAY - The handwheel shows the Y Z A X-axis of the mechanical coordinates and workpiece coordinates, also the spindle speed, the value of the feed rate, dot matrix LCD with background lighting, axis selection, power band switch control.
Buy on Amazon Find on eBay
Workholding Collets

RATTMMOTOR 14 Pcs ER11 Spring Collet Set,Collet Chuck 1-7mm Spring Pliers for Router CNC Engraving/milling Machine Lathe Tool

RATTMMOTOR 14 Pcs ER11 Spring Collet Set,Collet Chuck 1-7mm Spring Pliers for Router CNC Engraving/milling Machine Lathe Tool Cover
  • HIGH QUALITY - the collet is made of steel ， stable in performance, fine workmanship, good elasticity, high precision. Runout tolerance: 0.01mm (0.0006 ")
  • PACKAGE INCLUDES - 14 pieces ER11 collet chucks (1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.175mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm)
  • SEPARATE PACKAGING - Each chuck has a separate packaging. The size is indicated on the packaging so you can easily choose the right chuck.
Buy on Amazon Find on eBay
3D Printer Motors

RATTMMOTOR Pack of 4 Bracket for Nema 23 Stepper Motor Stepper Motor Mount with Mounting Screws for 3D Printer CNC Engraving Machine Milling Machine

RATTMMOTOR Pack of 4 Bracket for Nema 23 Stepper Motor Stepper Motor Mount with Mounting Screws for 3D Printer CNC Engraving Machine Milling Machine Cover
  • High-quality material – the holder is made of alloy steel, is strong and durable and cannot be easily deformed.
  • Package includes: 4 x brackets for Nema 23 stepper motor, size 68 x 68 x 64 mm, black
  • Fine workmanship: all slots and openings of the holder have been finely stamped to ensure accurate dimensions, and can be used perfectly with the motor.
Buy on Amazon Find on eBay
Engraving Pens

RATTMMOTOR 80mm Dust Shoe Cover Cleaner Spindle Motor Dust Cover for CNC Router Milling/Engraving Tool

RATTMMOTOR 80mm Dust Shoe Cover Cleaner Spindle Motor Dust Cover for CNC Router Milling/Engraving Tool Cover
  • Easy to use: after opening the locks on both sides, the brush can be installed and removed, which is very convenient and fast.
  • Package includes: 1 x 80 mm spindle motor dust cover
  • Package includes: 1 x 65 mm spindle motor dust cover
Buy on Amazon Find on eBay
Engraving Pens

RATTMMOTOR 65mm Dust Shoe Cover Cleaner Spindle Motor Dust Cover for CNC Router Milling/Engraving Tool

RATTMMOTOR 65mm Dust Shoe Cover Cleaner Spindle Motor Dust Cover for CNC Router Milling/Engraving Tool Cover
  • Easy to use: after opening the locks on both sides, the brush can be installed and removed, which is very convenient and fast.
  • High-quality material the surface is treated with baking varnish, which is beautiful and durable. The thickened brush is not easy to deform.
  • Package includes: 1 x 65 mm spindle motor dust cover
Buy on Amazon Find on eBay
International Power Adapters

RATTMMOTOR CNC Tool setter,IP67,5mm Stroke 0.001mm Accuracy,Automatic Z Axis Touch Plate Tool Setting Probe High Precision Router Auto Check Instrument for DIY Engraving Machine Milling Tools

RATTMMOTOR CNC Tool setter,IP67,5mm Stroke 0.001mm Accuracy,Automatic Z Axis Touch Plate Tool Setting Probe High Precision Router Auto Check Instrument for DIY Engraving Machine Milling Tools Cover
  • SAFE OPERATION - When the maschine is over-travel, an alarm signal is issued in time to avoid other troubles.
  • EASY TO USE - The bottom magnet is designed to be attached to the machine, easy to install. Z Axis probe is energy saving and environmental protection.
  • PREMIUM MATERIAL - This is special tool setting instrument for engraving machine, waterproof, dustproof, durable.
Buy on Amazon Find on eBay
Engraving Pens

RATTMMOTOR 2.2Kw Spindle Motor Air-cooled 220V 24000R/min 400Hz ER20 4 Bearings Air-cooling Spindle Motor for CNC Engraving/Milling machine

RATTMMOTOR 2.2Kw Spindle Motor Air-cooled 220V 24000R/min 400Hz ER20 4 Bearings Air-cooling Spindle Motor for CNC Engraving/Milling machine Cover
  • PRECISION - Precision taper bore: less than 0.005mm. Note: The spindle speed must not fall below 9000 rpm !!!!
  • BASIC PARAMETERS - Power 2.2Kw, voltage 220V, frequency 400Hz, speed 24000rpm, 4 bearings, runout less than 0.02mm (the actual measured value is close to 0.01mm), collet ER20
  • OPTIMIZED BEARINGS - The bearings we use are optimized 7002 and 7005 bearings. This bearing has greatly improved the hardness and anti-rust performance, so that it has high precision and durability.
Buy on Amazon Find on eBay
Screwdriver Flexible Shafts

RATTMMOTOR Flexible Coupler 3 PCS 8mm to 10mm Plum Coupling L30 D25 Spindle Coupling Aluminum Alloy Flexible Jaw Spider Plum Coupling for CNC Engraving/Milling machine

RATTMMOTOR Flexible Coupler 3 PCS 8mm to 10mm Plum Coupling L30 D25 Spindle Coupling Aluminum Alloy Flexible Jaw Spider Plum Coupling for CNC Engraving/Milling machine Cover
  • PRACTICAL DESIGN - The coupling is simple in construction, easy to install and dismantle, and designed for light to medium loads. The flexibility of the coupling relieves the load on the engine and drive components.
  • PREMIUM MATERIAL - The shaft coupling makes of aluminum alloy, wear-resistant, high hardness and excellent response.
  • PACKAGE INCLUDES - 3 pieces D25 L30 plum coupling, Outside size 25x30mm (D x L)
Buy on Amazon Find on eBay
Engraving Pens

RATTMMOTOR 0.8KW Air Cooled Spindle Motor 220V 800W CNC Router Spindle Motor ER11 Φ65mm 400HZ 24000RMP for CNC Milling Machine

RATTMMOTOR 0.8KW Air Cooled Spindle Motor 220V 800W CNC Router Spindle Motor ER11 Φ65mm 400HZ 24000RMP for CNC Milling Machine Cover
  • This Spindle motor is mainly suitable for non-metallic engraving, Current is 4A; Frequency range is 0-400HZ.
  • This item is air cooled 800W 220V spindle motor, diamater is 65mm.
  • Speed: 10-24000RMP, This spindle's speed can't be lowered than 9000RMP!!!
Buy on Amazon Find on eBay
Engraving Pens

RATTMMOTOR 500W Air Cooling Spindle Motor Kit 0.5 kW ER11 12000 RPM Mini Spindle Motor and 220 V PWM Speed Controller + 14 Pieces ER11 Collet (1-7 mm) and 52 mm Bracket for CNC Engraving Machine

RATTMMOTOR 500W Air Cooling Spindle Motor Kit 0.5 kW ER11 12000 RPM Mini Spindle Motor and 220 V PWM Speed Controller + 14 Pieces ER11 Collet (1-7 mm) and 52 mm Bracket for CNC Engraving Machine Cover
  • High precision: concentricity deviation less than 0.03 mm (the actual measured value is close to 0.01 mm)
  • Spindle motor: power: 0.5 kW, idle speed: 2000-12000 rpm, torque: 0.5 Nm, insulation resistance: > 2 megaohm, collet ER11 (1 set ER11 collet chuck (1 mm, 1.5 mm, 2 mm, 2.5 mm, 3.175 mm, 3.5 mm, 3.5 mm, 3.5 mm, 3.5 mm, 3.5 mm, 3.5 mm, 175 mm, 3.5 mm, 3.5 mm, 3.5 mm, 3.5 mm, 4 mm, 4. 5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm)
  • Speed Controller: Speed converter input voltage: AC100-AC220V ± 10%, 50/60Hz; current limit: 6A; wiring: terminal type (convenient and fast)
Buy on Amazon Find on eBay
3D Printer Motors

RATTMMOTOR Nema17 Stepper Motor 78oz.in 48mm Length 1.8A Double Shaft for 3D Printer/Milling/CNC Milling Machine

RATTMMOTOR Nema17 Stepper Motor 78oz.in 48mm Length 1.8A Double Shaft for 3D Printer/Milling/CNC Milling Machine Cover
  • Holding torque: 78 oz.in
  • Nema17 Stepper Motor
  • These products are widely used in engraving machines, printers, medical equipment, embroidery machines, stage lighting, textile automation, printing, packaging and other industrial automation equipment
Buy on Amazon Find on eBay
Engraving Pens

RATTMMOTOR CNC Router 3018 Pro Engraving Machine 3 Axis GRBL Scattering ER11 Engraver Milling Machine for Wood PVC PCB DIY Engraving

RATTMMOTOR CNC Router 3018 Pro Engraving Machine 3 Axis GRBL Scattering ER11 Engraver Milling Machine for Wood PVC PCB DIY Engraving Cover
  • BASIC PARAMETERS - 775 spindle motor (12-36V) 24V, 10000rpm; Nema 17/42 stepper motor, rated current 1.3A, holding torque 0.25Nm, phase resistance 2.1Ohm
  • PACKAGE INCLUDES - 1 piece 3018 per engraving machine (accessories as shown), working area 30x18x4.5cm, housing dimensions 40x33x24cm
  • REQUIRED SYSTEM - Engraving machine supports Windows XP SP3, Win 7, Win 8,(32/64) can't use Win 10 . The machine cannot work with Apple products.
Buy on Amazon Find on eBay

RATTMMOTOR 4 Axis Electronic Hand Wheel MPG Trailer with Manual Emergency Stop Pulse Generator for CNC Milling Machine Mach3 Lathe

RATTMMOTOR 4 Axis Electronic Hand Wheel MPG Trailer with Manual Emergency Stop Pulse Generator for CNC Milling Machine Mach3 Lathe Cover
  • Basic parameter resolution: 100PPR; supply voltage: DC5V +/- 5%; supply current: ≤80mA; output voltage: ≥2.5V and ≤0.4V; output current:
  • Package includes: 1 x 4-axis Mach3 MPG trailer with emergency stop 5V 100PPR for CNC milling machine Mach3 lathe.
  • WARRANTY - If you find any problems after receiving the product, please contact us by email, we will solve the problem as soon as possible for you and give you a satisfactory solution. Our shop has its own warehouse in Germany. Shipped by the German warehouse, you can receive the shipment quickly.
Buy on Amazon Find on eBay
Engraving Pens

RATTMMOTOR DDCSV3.1 Offline Controller 4 Axis 500kHz CNC Offline Motion Control and 100PPR MPG Hand Wheel with Emergency Stop Switch for Stepper Motor Servo Motor

RATTMMOTOR DDCSV3.1 Offline Controller 4 Axis 500kHz CNC Offline Motion Control and 100PPR MPG Hand Wheel with Emergency Stop Switch for Stepper Motor Servo Motor Cover
  • Optimised system - DDCS V3.1 adopts the ARM9 + FPGA design framework. The ARM9 is main control chip, FPGA is core algorithm chip.
  • Ideal choice - DDCS V3.1 has been researched and developed by Faster CNC for four years by Faster CNC, with a control duration of only 4 milliseconds and a high control accuracy: the highest single-axle output pulse is 500 kHz and the pulse width adjustable, supports the common stepper motor and servo motor.
  • USB storage - USB flash disk supports input of G-code files (no size limit of G-code file) and data recovery after a power failure. The data is automatically saved.
Buy on Amazon Find on eBay
Ball Transfers

RATTMMOTOR SFU1605-L300mm Ballscrew with 1605 Nut Housing and BK/BF 12 for CNC Router Engraving/Milling Machine…

RATTMMOTOR SFU1605-L300mm Ballscrew with 1605 Nut Housing and BK/BF 12 for CNC Router Engraving/Milling Machine… Cover
  • HIGH QUALITY - No slip effect, heats up less, less drive force required, high static and dynamic rigidity.
  • BASIC PARAMETERS - Class: C7, screw diameter: 16mm, thread pitch (lead): 5 mm, screw length: 300mm
  • PACKAGE INCLUDES - 1 SFU1605-300mm ball screw with Nut (BK / BF10 standard machining) (total length)
Buy on Amazon Find on eBay
Engraving Pens

RATTMMOTOR CNC Milling Cutter Engraving Machine Z Axis Slide Lift Adjustable Screw Module Laser Head Focusing Fixed Metal Bracket

RATTMMOTOR CNC Milling Cutter Engraving Machine Z Axis Slide Lift Adjustable Screw Module Laser Head Focusing Fixed Metal Bracket Cover
  • Working performance: adjust the focus distance manually by fine adjustment to make the work easier
  • Applicable situation: the Z axis sliding track is suitable for woodworking and laser CNC engraving machines.
  • [Mechanical Accessories] It is an important hardware device for industrial machinery, which can accurately control the accuracy and speed of moving parts of mechanical equipment.
Buy on Amazon Find on eBay

RATTMMOTOR FAQs