SparkFun feature image

SparkFun

Review rating Review rating Review rating Review rating Review rating 4.8

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the SparkFun range from £2.99 to £24.4, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. SparkFun provides their products for a reasonable price, which means the products cost around £12.58 on average. They are affordable options to make your shopping much easier.

SparkFun offers a variety of products, there are 306 products available, 13 of which were analyzed in detail and recommended to customers. The SparkFun review will examine the core factors of the brand and its products to help you make an informative buying decision.

SparkFun Best Sellers

Last Updated: 14 Jun 2023

Load Cell Amplifier - HX711

Selectable 10SPS or 80SPS output data rate
Operation Voltage: 2.7V-5V, Operation Current: < 1.5mA
Simultaneous 50 and 60Hz supply rejection
Model number: SEN-13879

SparkFun MicroMod Teensy Processor

With the M.2 MicroMod connector, connecting your Teensy Processor is a breeze. Simply match up the key on your processor's beveled edge connector to the key on the M.2 connector and secure it with a screw (included with all Carrier Boards). Adding a Teensy to your desired project has never been easier!
The SparkFun MicroMod Teensy Processor leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod connector to allow you to plug it into your choice of compatible MicroMod Carrier Board.
The Teensy Processor Board boasts some impressive computing power with an ARM Cortex-M7 processor operating at clock speeds up to 600MHz, 16MB Flash Memory and 1024K RAM Memory.
On top of all that processing power, the board features seven serial UART ports, four I2C buses, two SPI ports, CAN-Bus, 12 GPIO, dedicated digital, analog, and PWM pins, USB Host and Device capability up to 480Mbit/s, digital audio and since many of the pins on the iMXRT1062 support multiple signal types you can customize it even further depending on your project's needs.

OpenLog Data Logger

Simple command interface
Log to low-cost microSD FAT16/32 cards up to 16GB
Reprogrammable ATmega328 using the Arduino IDE
Edit config.txt file from a computer to change baud rate and other system settings
Configurable baud rates (2400 to 115200bps)

SparkFun Qwiic LED Stick - APA102C

Write to individual LEDs to display a count in binary, or write to the whole strip for cool lighting effects.
The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C.
The LED Stick has a default I2C address of 0x23 but can be changed with a simple command, allowing you to control up to 100 LEDs (10 Qwiic LED Sticks) on a single bus!
Like many Qwiic compatible boards, this one is simply plug and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!
Fast shipping from our UK Store

Stackable Header Kit Designed for and Compatible with Arduino Uno R3, Leonardo and Other Arduino Development Boards

2x – 8-pin Arduino Stackable Headers
Designed to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward.
1x – 6-pin Arduino Stackable Headers
1x – 10-pin Arduino Stackable Headers

SparkFun Current Sensor Breakout - ACS723

The circuit being sensed is completely isolated from the sensing circuit allowing higher voltage curcuits to be measured
This is a high accuracy board that utilises the ACS723 for low to moderate AC and DC current sensing applications
There are great resources available to get you started
It's capable of measuring both DC and AC currents up to 5A
Comes pre-assembled and ready to use!

SparkFun Configurable OpAmp Board - TSH82

There's two gain stages, each one independently accessible on the header pins
The best combination of performance and flexibility in a single OpAmp board!
With the use of the jumpers on the back of the board, you can configure each stage
The default configuration is inverting with a gain of -4.7 with a bandwidth of almost 10MHz
Full hookup guide and datasheets avaiable online

Muscle Wire - Shape Memory Nitinol

Arduino Pro Mini 328-5V/16MHz(New)

It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! Minimal design approach to Arduino.
Arduino Pro Mini 328 - 5V/16MHz(New)

Timer, Op Amp, and Optoelectronic Circuits and Projects: Forrest Mims Engineer's Mini Book Vol. 1

Programming Interactivity: A Designer's Guide to Processing, Arduino, and openFrameworks

Making Android Accessories with IOIO: Going Mobile with Sensors, Lights, Motors, and Robots

BOB-11955 SparkFun Level Translator Breakout - PCA9306 / UK STOCK


SparkFun FAQs

You can purchase SparkFun products from the seller Cool Components Ltd, over the last 12 months, the seller has received honest feedback from 31 consumers, and the average rating is 4.84. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and SparkFun is worth your consideration.

Most of the SparkFun products are produced by Cool Components, SparkFun Electronics, and Sparkfun Electronics. The manufacturer provides SparkFun with a steady supply of products, and they have a good cooperative relationship with each other.