POLISI3D

4.8

Buy on Amazon

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the POLISI3D range from £5.99 to £45.89, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. POLISI3D provides their products for a reasonable price, which means the products cost around £14.5 on average. They are affordable options to make your shopping much easier.

POLISI3D offers 179 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The POLISI3D review will guide you with an in-depth look into the brand and its products to ensure you make the right purchase decision.

POLISI3D Best Sellers

Last Updated: 14 Jun 2023

100pcs 20 Series T Sliding Nuts Hammer Nut Block Square Nuts M5 T Nuts for 2020 Aluminum Profiles T Slot 6mm (m5)

T-Nuts

Buy on Amazon Find on eBay

Applicatable for 20mm series 6mm slot european aluminum extrusion

Material:Zinc Plating Carbon Steel

Size: M3, M4 or M5

Package: 100pcs

Original Creality CR6 SE Hotend Extruder Full Kit Assembled for CR-6 SE CR6 MAX 3D Printer w/Auto Leveling, Back Support Bracket, Heater, Thermistor, Cooling System

3D Printer Nozzles

Buy on Amazon Find on eBay

Integrated Design: Brass nozzle heating/cooling system leveling system V pully Fixed wiring port, supper simple installation.

metal shell, high precision, stable operation efficient heating and heat dissipation

Package: 1set Full Assembled Hotend kit with Heater, thermistor , PTFE tube and silicone cover, LED, Cooling Systems like our first photo shows

More efficient heating and heat dissipation: Advanced thermistor & heating tube assembly, rapid heating. The heatsink adopts a hollow structure, which makes heat dissipation more efficient. Nozzle equipped with a powerful silent cooling fan can increase heat dissipation by 30%. The data comes from simulaiton analysis of Creality Lab.

High Precision Intelligent Leveling: Brand new automatic leveling sensor, high precision andlow energy consumption automatic leveling, accurate data transmission, standard deviation is only 0.005mm.

Read more Read less

Long M6 Thread Plated Copper Nozzle 0.8 Non-Stick High Performance Compatible with 1.75mm Volcano Heater Block hotend Sidewinder SW X1 X2 3D Printing PEI PEEK or Carbon Fiber (0.8mm)

Buy on Amazon Find on eBay

Material: Copper, Plated; Nozzle size: 0.8mm

This nozzle is made from Copper, plated, to make the printing Non- stick, high performance, high temperature about 500degree, Excellent precision production,

This nozzle is marked with number 0.8mm

Suitable for 1.75mm filament, and compatible with volcano heater block.

Package: 1piece

CNC Digital Microstep driver DM542 Stepper Motor Driver Controller 2-phase 20-50V DC Max 4.2A 42 57 86 Motor Driver for Nema 17, 23 and Nema 34 series stepper motor, Replace M542 M542H

Motor Drivers

Buy on Amazon Find on eBay

Package: 1piece DM542

Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor，2-phase hybrid stepper motors (Outer diameter: 42, 57,86mm).

This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 42,57,86 type 2-phase 4-phase (4-wire, 6-wire, 8-wire)

PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.

More informations, please refer to the last photo in this link.

Upgrade CR6 SE All Metal Bimetal Heatbreak Copper Titanium TC4 Throat for Creality CR-6 SE/Max/CR-5 PRO 3D Printer

Buy on Amazon Find on eBay

Bi-Metal Heatbreak melts filament faster , The inner wall of the titanium is very smooth so that the filament can pass through and reduce clogging.

This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.

Packge: 1 piece Upgrade Bi-metal heatbreak

It is named "Bi-Metal Heatbreak" It has two components with different thermal conductivity. It is composed of 2 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged.

Compatible with Creality CR-6 SE, CR-6 Max, CR-5 PRO 3D Printer

3D Printer High Temperature Plated Copper Heater Block for PT100 Cartridge Sensor Version V6 Hotend Titan Aero Extruder (Copper)

Buy on Amazon Find on eBay

Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.

Material: Copper alloy; It is machined with very high precision and high quality

This heater block is for OD 3mm cartridge temperature sensor

This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing

Creality Original Upgrade Rotatable Filament Holder Mount Spool Bracket for Ender 3 V2 Ender3 Pro/Max, CR-6 SE/Max, CR-10 MAX/ANYCUBIC Vyper 3D Printer

Buy on Amazon Find on eBay

This Spool holder kit is original from creality and made of high strength ABS and PC material. The delicate appearance with surface sanding process makes the printer elegant.

The Spool holder can rotate 90C in a single track, making the filament better fit on your table.

Package: 1sets rotatable holder

International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Compatible with Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 3S, CR-10 MAX, CR-6 SE, CR-6 MAX and Suit for 1Kg 1.75mm 3.0mm 3d printer filament

2-Pack CR-10 Heater Block for Creality All Metal Hotend Ender 3s Ender 3 pro Ender 5 Pro CR10 S4 S5 3D Printer (Aluminum)

Buy on Amazon Find on eBay

Compatible with Creality ALL Metal Hotend Ender 3s Ender 3 pro Ender 5 Pro CR10 S4 S5 3D Printer and MK8 MK9 extruder

Material: Aluminum alloy; Surface treatment : Sandblasting oxidation treatment, It is machined with very high precision and high quality

Size: 20x20x10mm

Package: 2pieces aluminum CR10 heater blocks

Upgraded Replacement CR-10S Pro Dual Gear Extruder Dual Drive Gear Aluminum mk8 Metal Extruder Kit for Creality 3D Printer CR-10, CR-10 S4, S5 Ender 3, Ender-5 and Tornado 3D Printer

Buy on Amazon Find on eBay

Double gear extrusion mechanism, high extrusion force, ensuring smooth feeding,

Suitable: For 1.75mm CR-10, For CR-10S, For Ender-3, For Ender-3 PRO

This aluminum alloy driver is specially designed for CR-10S PRO.But It can also be installed in Ender-3, Tornado, CR-10 and ender 5... stable and durable.

Better pressure pushes the filament into the printer nozzle

All-metal aluminum alloy, diy aluminum block, need to be assembled by itself

CR6 SE Cartridge Heater 24V 40W + Thermistor HT-NTC100K 300C Degree High Temperature Sensor Compatible with Creality CR-6 Max/CR-5 PRO 3D Printer Accessoriess (Heater)

Buy on Amazon Find on eBay

Heater rod size: φ6X20mm, 24V 40W with terminal XH2.54, cable length with terminal about 90mm

This kit includes 1piece heater cartridge and 1piece thermistor temperature sensor

Thermistor rod size: 3x15mm, NTC100K B3950, upgraded, can reach up to 300C degree for long time working.

Compatible with Creality CR6 SE/ CR-6 MAX/ CR-5 Pro 3D Printer

Also can be used for other 3D Printer, but please must pay attention to the length and terminal when using it for other 3D Printers.

2-Pack CR10 Z axis T8 Anti Backlash Spring Loaded Nut Elimination Gap Brass Nuts for Upgrade Ender 3 Ender 3s Ender 3 Pro V2 CR-10 Tornado 3D Printer 8mm Acme Threaded Rod (Nuts)

Buy on Amazon Find on eBay

8mm lead T8 lead screw is with 4 starts.

Lead Screw Diameter: 8mm, Pitch: 2mm, Lead of thread: 8mm; two small M3 holes centre distance is 18mm

Package: 2 set T8x8 anti-backlash Brass nuts

Interchangeable Heater block Nozzles kit compatible with Ultimaker 2 + UM2 Extended 3D printer Olsson Block Hotend, 3.0mm

3D Printer Nozzles

Buy on Amazon Find on eBay

Nozzles: 1pcs 0.25mm + 1pcs 0.4mm + 1pcs 0.6mm + 1pcs 0.8mm

This hotend kit is improved compatible with Ultimaker 2 series 3D Printers that the nozzle and heat block are two seperate pieces, can change the nozzle size easily.

Package: 1pcs olsson block+ 4pcs nozzles+ 1pcs screw

Material: brass

Filament size use: 3.0mm or 2.85mm

4-Pack Upgrade Ender 3 Glass Bed Spring Turn Clips Platform Clamps Stable for Creality Ender 3 Pro Ender 3S Ender 5 Pro CR-20 PRO CR-10S Pro 3D Printer

Buy on Amazon Find on eBay

Made from Stainless steel material.

Package: 4pieces clamps

This Clips is Spring turn,Upgraded, more stable, Easy to install,remove and hold the glass perfectly.

It is compatible with Creality Ender 3 pro Ender 3 V2 Ender 3S Ender 5 Pro CR-20 PRO 3D Printer and other 3D printers

Install: Put the clip under the bed; press the two spring sheets with your finger, slide the clip all the way onto the heated bed and glass bed while please make sure the top sheet of the clips not touch the glass until all the way in position.

100-Pack 2020 2040 2060 Roll in Spring Loaded T Nut M5 for 20x20 20 Series Aluminum Extrusions 6mm Slot Aluminum Profile Accessories (m5)

T-Nuts

Buy on Amazon Find on eBay

Applicatable for 20mm series 6mm slot aluminum extrusion

Material:Nickel Plating Carbon Steel

Size: M5

Package: 100pcs

2-Pack NTC 100K B3950 Thermistor OD3mm Cartridge Sensor High Temperature 280℃ for Ender 3 V2 Pro CR10 V6 PT100 Heater Block 3D Printer

Buy on Amazon Find on eBay

DIY players can also modify BLOCK by themselves. Make OD3mm hole in BLCOK, then you can use this thermistor, Or source the PT100 version heater block which has 3mm ID hole, If you need V6 PT100 version heater block, please check this ASIN " B08NPKF2GC "; If you need Ender or CR10 PT100 version heat block, please search this ASIN " "

A custom made thermistor encapsulated into an easy to use cartridge package.This sensor are able to measure higher temperatures-upto 280degC.

Package: 2pieces 3mm cartridge 3950B thermistor

Marlin firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE" #define TEMP_SENSOR_0 13 https://github.com/MarlinFirmware/Marlin/blob/1.1.x/Marlin/thermistortable_13.h

1meter cable length, High accuracy:1%; Resistance value at 25°C=100K; B3950, high temperature Custom material wiring insulation. With Brass Material sleeve, Make temperature sensing more sensitive

Read more Read less

Sprite Extruder Heater Block Kit Standard 260℃ Cartridge Heater Thermistor Heatbreak Silicone Cover Compatible with Creality Ender 3 S1 and Plus 3D Printer (260℃)

Buy on Amazon Find on eBay

Heater rod size: φ6X20mm, 24V 40W with terminal XH2.54, total length with terminal about 73mm; Thermistor rod size: 3x5.5mm, NTC100K B3950, upgraded, can reach up to 260C degree for long time working.

This kit (unassembled) includes 1pc heater , 1pc thermistor, 1pc heater block, 1pc silicone sock, 1pc nozzle, 1pc heatbrea with PTFE tube inside and 2 pcs screws

this is designed for Sprite Extruder Standard kit 260C, Compatible with FDM 3D printer equipped with sprite extruder like Ender 3 S1 3D Printer

The Firmware for the thermistor, that is the same to the normal NTC100K 3950B thermistor, you should choose number 1 in Marlin firmware.

Block is made of aluminum, heatbreak is made of Stainless steel, Nozzle 0.4mm/1.75mm , all parts are Machined with high precision

Read more Read less

3D Printer 6x20MM 24V 60W High Temperature Heater Cartridge Element For V6 HOTEND PT100 Volcano MK8 Extruder CR-10 Ender 3 V2 CR10 3D Printer

Buy on Amazon Find on eBay

This heater has high quality, and uses closed stainless steel sleeve, much higher quality than the common heating tube on the market.

power: 24V 60W ; cartridge size: OD6 x20mm, 1meter long cable

This heater tube use high quality white cable and white sleeve, More durable and Better discrimination

Package: 1piece high quality heater cartridge tube 12V

Heating head: Stainless steel material, the MAX temperature could be 450C degree for long term heating.

1Set 3D Printer Trimming Knife Scraper PLA ABS PETG Material Filament Model Pruning Trimming Device 3D Printer Tool Trimming Tool Burr Trimming Scrapers with 10pcs Deburring Blades

Buy on Amazon Find on eBay

High surface quality: Compared with the use of grinding wheels or other deburring tools, the machining surface has high smoothness because the tool uses sharp cutting edges for cutting.

In the process of 3D printer DIY, it is inevitable that there will be burrs in metal parts or plastic parts. These burrs can be easily handled with a trimming knife and are safe and reliable, so it is not easy to hurt your own hands.

wide processing range, strong applicability: according to different processing materials, the use of different materials of the blade, can process stainless steel, aluminum alloy to rubber, plastic material range.（PLA/PETG/ABS/carbon fiber/PEI/PEEK）

easy to use and cost-saving: the tool is small in size, can be carried around, can replace the blade with a simple button, and does not use electricity and compressed air, saving energy, thereby saving costs.

Package: 1handle with blade+ 10pcs blades (1box)

Read more Read less

2-Pack 3D Printer TR8x4 T8 POM Anti Backlash Nuts for Pitch 2mm Lead 4mm Acme Threaded Rod Eliminate The Gap Spring DIY CNC Accessories (Pitch 2mm Lead 4mm)

Buy on Amazon Find on eBay

POM material is durable and silent.

Lead means Nut turn one circle,How far the screw forwards

Package: 2 sets POM nut kit like the first photo shows

Color is black

8mm lead is with 4 starts; 4mm lead is with 2 starts, 2mm lead is with 1starts

POLISI3D FAQs

How much do POLISI3D products cost?

100pcs 20 Series T Sliding Nuts Hammer Nut Block S... is the top 1 product we recommend in the POLISI3D buying guide, which is priced at £11.48, you can view it on Amazon page.
Original Creality CR6 SE Hotend Extruder Full Kit... is one of the popular products we recommend in the POLISI3D buying guide, which is priced at £45.89, you can view it on Amazon page.
4-Pack Upgrade Ender 3 Glass Bed Spring Turn Clips... is the cheapest product in the POLISI3D picks list, which is priced at £5.99, you can view it on Amazon page.
Original Creality CR6 SE Hotend Extruder Full Kit... is the most expensive product in the POLISI3D picks list, which is priced at £45.89, you can view it on Amazon page.

Where can you buy POLISI3D products?

You can purchase POLISI3D products from the seller 3DSolutionsHut, over the last 12 months, the seller has received honest feedback from 81 consumers, and the average rating is 4.84. The shop has a good reputation so you can purchase from it with confidence.

What do customers think of POLISI3D?

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and POLISI3D is worth your consideration.

Who are the manufacturers of the POLISI3D products?

Most of the POLISI3D products are produced by 3DSolutionsHut. The manufacturer provides POLISI3D with a steady supply of products, and they have a good cooperative relationship with each other.

Similar Brands