OnFireGuy feature image

OnFireGuy

Review rating Review rating Review rating Review rating Review rating 4.3

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the OnFireGuy range from £11.4 to £91.39, and the average price of all the products is about £31.27. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

OnFireGuy offers 66 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. The OnFireGuy review aims to sharpen your understanding of the brand and introduces you to their bestselling products. Just keep reading!

OnFireGuy Best Sellers

Last Updated: 14 Jun 2023

Air-Tite H$5ML 1oz Silver Maple Leaf Direct Fit Coin Capsule Holders, 25 Pack by OnFireGuy

Measurements: Inside Diameter 38mm x Depth 3.29mm, Outside Diameter 44.45mm x 5.4mm
COINS THAT FIT: 1oz Canadian Silver Maple Leaf, 1oz Canadian Wildlife Series
These capsules are specially designed for the Canadian 1oz Silver Maple Leaf coins
Genuine Air-Tite Holder Brand Capsules
Capsules are shipped Un-Assembled between layers of foam

7.62cm Geode Rock Mineral Agate Fossil Coral Triangle Acrylic Plastic Display Stand Holders, 3 Pack

Measurements: 3.81cm High x 7.62cm Wide x 7.53cm Deep
Display: Minerals, Fossils, Geodes, Specimens, and much more
Each corner/tip of the Triangle is raised to hold up an item
Distance between two back tips: 7.3cm
Distance between front and back tips: 8.89cm

3 Piece Dinnerware Display Stand for China Place Setting Holder

Measurements: 3-1/8" H x 3-1/2" W x 7-1/4" D
This listing is for (1) New Dinnerware Set Display Stand
Rubber feet on bottom of display
Made from 1/8" thick clear acrylic
3 Plates will sit at a ~23° angle

2-1/2" Acrylic Reversible Three Prong Tulip Display Stand Qty: 3

Measurements: 1-7/8" High x 2-1/4" OD x 2-1/8" ID x Side 1 is 1-1/4" Deep & Side 2 is 1/2"
This Offering is for (3) 2-1/4" Diameter 3 Prong Display Stands
The geode in the above photo is for demonstration purposes only and is NOT included in this sale
Injection molding process causes slight imperfections
Clear 1/8" Thick Acrylic Plastic

Single Pen & Spoon Display Stand Easel, 1 Pack

Measurements: 9.53 cm High x 3.97 cm Wide x 6.51 cm Deep
Display: A single pen or spoon up to 20.32 cm tall
Top Notch is 0.64 cm Depth and 1.27 cm Wide
Bottom Dimple is 0.32 cm Deep and 1.27 cm Diameter
0.48 cm Thick Clear Acrylic Plastic

Clear Display Stand Easel for Air-Tite Holder Coin Capsules Challenge Medals Casino Chips (Qty 5)

These Stands are Hard, Crystal Clear and Smooth to the Touch
This Easel Measures: 3.81cm H x 3.18cm W x 3.81cm D
Stands are securely packed to protect them during shipment
Made in the USA from Acrylic Plastic with a non-yellowing agent
Injection Molded Display Stands are PVC Free and Archival Safe

10 Clear Display Easels- Small

Measurements: 3.81cm High x 2.86cm Wide x 3.81cm Deep
This listing is for (10) New OnFireGuy Brand Clear Easels
Resting Area of 0.64cm with an Open Back
Polished acrylic easels made in the USA
Easels Hold: Coins, Challenge Coins, Medals, Military Challenge Coins, 5.08cm x 5.08cm Coin Holders, Medallions, Air-Tite Holder Coin Capsules, Guardhouse Capsule Holders, Lighthouse Snaplocks, Police Badges, Firefighter Badges, Pins, Sand Dollars, Sea Shells, Business Cards and much more.

Clear Display Stand Easel for Air-Tite Holder Coin Capsules Challenge Medals Casino Chips (Qty 20)

These Stands are Hard, Crystal Clear and Smooth to the Touch
Measurements: 3.81cm High x 3.18cm Wide x 3.81cm Deep
Made in the USA from Acrylic Plastic with a non-yellowing agent
Injection Molded Display Stands are PVC Free and Archival Safe
Easels Hold: Coins, Challenge Coins, Medals, Military Challenge Coins, 2” x 2” Coin Holders, Medallions, Air-Tite Holder Coin Capsules, Guardhouse Capsule Holders, Lighthouse Snaplocks, Police Badges, Firefighter Badges, Pins, Sand Dollars, Sea Shells, Business Cards and much more

OnFireGuy 6 Feet Premium Clear High Performance Gas Oil Injection Fuel Line Hose Pulse Tubing for 1/8" Fittings

Specifications: 5/32" ID x 7/32" OD. This tubing is for 1/8" fittings, it does not measure 1/8" ID.
This Offering is for (1) Six Foot Section of Fuel Line
This tubing is Specially Designed and manufactured to work with all types of 1/8" size fittings and connections
The exceptional chemical resistance of this fuel line makes it perfect for all gasoline, oil and grease applications. This includes; High Octane Race Gas, Alcohol and Nitro fuels.
Due to it's high tensile strength, this premium quality fuel line is able to withstand very wide temperature ranges from -65°F to 220°F without any deterioration, cracking or hardening.

OnFireGuy Rotating Walnut Dimple Display Stand for 6" to 8" Spheres

The stand will not spin on its own. It must be spun manually.
This stand is made from real walnut wood attached to a steel base with ball bearings.
Made in the U.S.A.
Display spheres, crystal balls, globes, and much more. The example sphere in the photo measures 6 inches in diameter.
Dimensions: 4 inch Diameter x 1-1/4 inch High. Dimple Diameter is 2 inches.

OnFireGuy Rotating Walnut Dimple Display Stand for 4" Spheres

The stand will not spin on its own. It must be spun manually.
This stand is made from real walnut wood attached to a steel base with ball bearings.
Made in the U.S.A.
Display spheres, large eggs, globes, and much more. The example sphere in the photo measures 4 inches in diameter.
Dimensions: 3 inch Diameter x 1-1/4 inch High. Dimple Diameter is 1-1/2 inch.

OnFireGuy High Relief 39mm Direct Fit 2oz Queen's Beast & 2oz Biblical Series, Qty: 25

Inside Diameter: 39.6mm x Inside Depth: 5.55mm
COINS THAT FIT: 2oz Queen's Beast (Lion, Griffin, Dragon, Falcon, etc.), 2oz Biblical Series Coins, 2oz Silver Bug Series (Scarab Beetle and Lady Bug)
Outside Diameter: 44.79mm x Outside Depth: 8.2mm
Capsules are shipped un-assembled between layers of foam and cardboard
Capsules are made in the U.S.A. and suitable for extended periods of long-term coin storage

OnFireGuy High Relief 39Mm Direct Fit For 2Oz Queen's Beast & 2Oz Biblical Series, Qty: 10

Inside Diameter: 39.6mm x Inside Depth: 5.55mm
COINS THAT FIT: 2oz Queen's Beast (Lion, Griffin, Dragon, Falcon, etc.), 2oz Biblical Series Coins, 2oz Silver Bug Series (Scarab Beetle and Lady Bug)
Outside Diameter: 44.79mm x Outside Depth: 8.2mm
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Capsules are made in the U.S.A. and suitable for extended periods of long-term coin storage

OnFireGuy 4-1/2 Adjustable Metal Arm Display Stand Easel with Acrylic Base, 1 Pack

Display: Geodes, Fossils, Minerals, Slabs, Small Plates/Saucers, Picture Frames and much more
This listing is for 1 adjustable metal arm display easel
Single Vertical Post: 3-7/8" H. Arm Length: 2-3/4" D x adjustable to 4-1/4" Wide
Measurements: Overall 4-1/2" H x 3-1/2" W x 3-1/2" D
Brass arms can be adjusted to hold your item in place

2 Piece Dinnerware Display Stand for China Place Setting Holder

2 Plates will sit at a 23° angle
Measurements: 3-1/2" H x 3-3/8" W x 5-1/4" D
Rubber feet on bottom of display
Made from 1/8" thick clear acrylic

4-1/2" White Wire-Back Folding Easel with 3-1/2" Resting Shelf Qty 1

Measurements: 4-1/2" H x 3-1/4" W x 5" D
This Listing is for (1) One New 4-1/2" Adjustable Display Stand Easel
Shelf Depth of 3-1/2"
Holds items 6" - 8" H
3/16" Thick Clear Acrylic Plastic

3-1/2" Adjustable Metal Arm Display Stand Easel with Acrylic Base Qty (1)

Measurements: Base: 7/16" H x 2-1/4" W x 2-1/4" D. Total Height: 3-1/2". Single Vertical Post: 2-7/8" H. Arm Length: 1-5/8" D x adjustable to 3" Wide.
This Listing is for (1) New 3-1/2" Adjustable Display Stand Easel
The photo with the geode is for display purposes only and is not included with this listing
Manufactured in the USA
Adjustable arms

OnFireGuy 1-1/4" Slotted Name Card Sign Display Stand Holders Qty 24

Measurements; 3/8" H x 1-1/4" W x 1" D
This offering is for a lot of (24) NEW 1-1/4"Card Display Stand Easel
This easel is designed to hold up to Business Card size items
Slot to hold a card is 1/8" thick
Made in the United States

OnFireGuy FAQs

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and OnFireGuy is worth your consideration.

Most of the OnFireGuy products are produced by Air-Tite and OnFireGuy, LLC. The manufacturer provides OnFireGuy with a steady supply of products, and they have a good cooperative relationship with each other.